Product identification

Engine coolant

CASE AKCELA ACTIFULL™ EXTENDED LIFE COOLANT is the reference genuine product for machine service. NOTICE: Never add Supplemental Coolant Additives (SCA) when using CASE AKCELA ACTIFULL™ EXTENDED LIFE COOLANT .

CASE AKCELA ACTIFULL™ EXTENDED LIFE COOLANT has used if refilling the cooling system is needed. Refer the dedicated procedure and recommendations described in Chapter

CASE AKCELA ACTIFULL™ EXTENDED LIFE COOLANT must used for the replacement engine coolant according the maintenance program the machine. The replacement should also tackled in case repair replacement components the cooling system. Refer the dedicated procedure described in Chapter

The engine cooling system should always refilled with coolant solution made mixture antifreeze and distilled (deionized) water . NOTICE: Never refill the cooling system with only antifreeze. Never refill the cooling system with only water .

Using CASE AKCELA ACTIFULL™ EXTENDED LIFE COOLANT , a / mixture antifreeze and distilled (deionized) water grants proper performance the engine cooling system in the above mentioned operating temperature range the machine.

CASE AKCELA ACTIFULL™ EXTENDED LIFE COOLANT is available as: • / PREMIXED coolant solution ready for usage. • CONCENTRA antifreeze mixed / with distilled (deionized) water . NOTICE: operating in extreme winter climate, a coolant solution made / antifreeze / distilled (deionized) water mixture should used in order grant proper performance the engine cooling system. NOTICE: Never use coolant solution with more than % antifreeze. This affects the cooling capacity the mixture.

When the coolant solution is prepared starting from the CONCENTRA product, the antifreeze concentration in the mixture antifreeze and distilled (deionized) water can determined with a refractometer designed measure ethylene glycol content.

distilled (deionized) water not available, use water for dilution with the following properties:

Property Maximum limit T otal Solids 340 ppm T otal Hardness 170 ppm Chloride (Cl) ppm Sulfate (SO4) 100 ppm Acidity 5.5 9.0

NOTICE: Never use hard water , sea water and softened sea water that has been conditioned with salt. The minerals and salts present in potable water can cause corrosion and deposits resulting in shortened engine life.

Fuel

Use only Low Sulfur Diesel that meets GOST R52368 – T ype I specifications. NOTICE: Never use Diesel fuel having a Sulfur content higher than 350 ppm .

Using other types fuel may lead stalled engine output deterioration in fuel economy . NOTICE: The warranty should invalid if any serious defect is caused usage any other fuel. Using any fuel other than the prescribed type will cause damages the fuel supply system, the fuel injection system, and the engine block. CASE CONSTRUCTION will not responsible any such damages.

the temperature drops below the fuel cloud point, output deficiency engine start problems may occur due wax crystals. NOTICE: operating in severe winter climate, consult the fuel supplier the CASE CONSTRUCTION dealer for specific diesel fuel used.

The diesel fuel used the machine should: • free from dust particles, even minute ones. • have the proper viscosity . • have a high cetane number . • present great fluidity low temperatures. • have low sulfur content. • have very little residual carbon. NOTICE: Never use a mix diesel fuel and old engine oil. The fuel injection system and the exhaust after treatment system will severely damaged. NOTICE: consult the fuel supplier the CASE CONSTRUCTION Dealer regarding appropriate use fuel additives. NOTICE: in order prevent condensation during cold weather , fill the fuel tank full after completing the day's work.

Fuel storage:

Long storage can lead the accumulation impurities and condensation in the fuel. Engine trouble can often traced the presence water in the fuel. The storage tank must placed outside and the temperature the fuel should kept low possible. Drain f water and impurities regularly .

Disposal fluids, lubricants, and spare parts

Fluids, lubricants and spare parts used the machine are not fully compatible with the environment. Make sure carry out all maintenance operations using appropriate tools, in order avoid any risk damaging the environment. NOTE: for example, make sure that the receptacle for collecting oil replaced is not leaking.

Never spread fluids lubricants the ground into water . Consult the CASE CONSTRUCTION Dealer the Local Environmental Agency in order obtain information the correct method disposing fluids and lubricants used the machine.

Never throw away spare parts filters batteries. Consult the CASE CONSTRUCTION Dealer the Local Environmental Agency in order obtain information the correct method disposing filters, batteries other spare parts used the machine.