1 minute read
Removing and installing the decompression lever
REMOVING AND INSTALLING THE DECOMPRESSION LEVER
Removing the decompression lever — Remove the cylinder head Fig. 42 Knock the spring pin out of the decompression shaft (42/1).
Fig. 43 Turn over the cylinder head, screw out the headless screw (43/1) and remove the spring (43/2). This frees the shaft. 42
Fig. 44 Disengage the two circlips (44/1) from the shaft and use a suitable drift to knock the shaft out of the cylinder head. 43
fl ~J0 If C La
