DOS Flash Utility

Perform the following steps to use the DOS Flash Utility: 1. Press F2 during boot to enter the Setup Menu. 2. Select Boot Menu to modify the boot priority order, for example, if using USB HDD to Update BIOS, move

USB HDD to position 1.

3. Execute the FLASH.BAT batch file to update BIOS in DOS mode. The flash process begins as shown.

Information PhoenixBIOS Setup Utility Main Boot Security Exit

Boot priority order: 1: IDE0: ST960821A 2: IDE1: MATSHITADVD 3: USB FDD: 4: Network boot: Realtek Boot Agent 5: USB HDD: xxxx USB 5: USB HDD: xxxx USB 6: USB CDROM: ItemSpecificHelp

Use < > or < > to select a device, then press <F6> to move it up the List, or <F5> to move it down the list. Press <Esc> to escape the menu.

F1 Esc Help Exit Select Item Select Menu F5/F6 Enter ChangeValues Select Sub-Menu F9 F10 SetupDefaults SaveandExit