Removing the Hard Disk Drive 2 (HDD2) Module

1. See “Removing the Battery Pack” on page 44. 2. See “Removing the SD Dummy Card” on page 45. 3. Release the two captive screws on the hard disk 2 module cover.

4. Lift and remove the HDD2 bay cover.

NOTE: The HDD2 module is available in certain models only. If your model does not have an HDD2, please skip to the next section and disregard the steps for removing the HDD2 module below.

NOTE: To prevent damage to device, avoid pressing down on it or placing heavy objects on top of it. 6. Remove the two screws (D) securing the hard disk to the bracket and remove the hard disk from the bracket.

Size (Quantity) Color Torque Part No.

M3 x L4 (2) Silver 3.0 kgf-cm 86.9A554.4R0