5–13 Filling the Transmission

from Allison Transmission MT1321EN AT 500 & AT 1500 Series Transmission Mechanic's Tips Manual - PDF

7–1 Owner Assistance

• Install the speedometer drive cable onto the driven gear assembly. Tighten the cable nut to 50–55 lb in. (5.6–6.2 N·m). Avoid sharp bends in the cable. The torque required to drive the cable and all associated equipment should not exceed 25 oz-in. (0.17 N·m).

5–13. FILLING THE TRANSMISSION

• Be sure the transmission hydraulic system is properly filled with fluid before starting the engine. Refer to Paragraph 1–4.

5–13 Filling the Transmission

Next Article

7–1 Owner Assistance

More articles from this publication:

7–1 Owner Assistance

5–9 Installing, Adjusting Mechanical Modulator Control

4–4 Checking Controls

4–1 Checking Flexplate, Engine Features

1–4 Fluid Check Procedure

1–10 Auxiliary Filter

7–2 Service Literature

6–1 Installation Checklist

6–2 Road Test and Vehicle Operation Checklist

This article is from:

Allison Transmission MT1321EN AT 500 & AT 1500 Series Transmission Mechanic's Tips Manual - PDF