Removing the Flush LCD Bezel

1. See “Removing the LCD Module” on page 78. 2. Starting in the centre and working toward the top corners, pry apart the top edge of the LCD Module as shown.

3. Lift the front edge of the bezel away from the LCD Module as shown.

4. Apply pressure in the direction of the arrow (1) and lift the right side of the bezel away from the LCD Module (2). IMPORTANT: Do not completely remove the bezel; the Microphone cable is still attached to the bezel.

2

1

5. Apply pressure in the direction of the arrow (1) and lift the left side of the bezel away from the LCD Module (2). IMPORTANT: Do not completely remove the bezel; the Microphone cable is still attached to the bezel.

2

1

6. Lift the bottom edge of the bezel away from the LCD Module as shown. IMPORTANT: Do not completely remove the bezel; the Microphone cable is still attached to the bezel. 7. Flip the bezel over to expose the Microphone cable and module.

8. Disconnect the Microphone cable connector as shown and remove the bezel from the LCD Module.