Removing the LCD Panel

1. See “Removing the Standard LCD Bezel” on page 116. 2. Remove the seven screws securing the LCD Panel to the cover.

NOTE: The six bracket screws are numbered from 1 to 3 on each bracket. Remove the screws in reverse order from 3 to 1.

3 2 1 3 1 2

Step

LCD Panel (red callout)

LCD Panel (green callout)

Size

M2.5*4 6

M2*3 1

Quantity Screw Type

3. Remove the LVDS and Antenna cables from the left and right hinge wells as shown. Ensure that the cables are free from all cable clips.

4. Lift the panel front edge first as shown and flip it over to expose the Camera Module. IMPORTANT: Do not completely remove the panel; the Camera cable is still attached to the back of the panel.

5. Disconnect the Camera connector as shown and remove the panel from the LCD cover.