Removing the LCD Module

1. See “Removing the Switch Cover” on page 75. 2. Turn the computer over and ensure that the Antenna cables are free from obstructions.

3. Pull the Antenna cables through the Upper Cover as shown. Ensure that the Antennas are completely free from the cover.

4. Remove the Antenna from the cable channel all the way to the Hinge Well. Ensure that the cables are free from all cable clips.

6. Remove the LVDS cable from the cable channel all the way to the Hinge Well. Ensure that the cable is free from all cable clips.

7. Disconnect the MIcrophone cable from the Mainboard.

8. Remove the Microphone cable from the cable channel all the way to the Hinge Well. Ensure that the cable is free from all cable clips.

9. Remove the four screws securing the LCD Module to the Lower Cover.

LCD Module M2.5*6.5 4

10. Using both hands, lift the LCD Module clear of the Lower Cover.