Electronic adaptation plate V24–2.....................................................................................................................................F0

Pin Wire mm² Designation Tip State

12 075-5 1.0 + APC front tool power socket (5 A) J289 B

13 236-5 0.5 D+ alternator J004 2

14 188-5 0.5 Step working light command J004 24 15 074-5 1.0 + APC rear tool power socket (5 A) J072 82 16 M161-5 2.5 Ground of front tool power socket 1 J289 J

17 M162-5 2.5 Ground of front tool power socket 2 J289 S

18 M130-5 2.5 Ground of rear tool power socket 1 J072 31

19 M131-5 2.5 Ground of rear tool power socket 2 J072 31

J063Connector - Hexashift Transmission harness / V21-1 base plate

Pin Wire mm² Designation Tip State

1 217-9 0,75 Reverser relay command J003 36 2 631-9 0.75 J1939 CAN H powertrain (to transmission) J158 2

3 508-9 0,75 Reverser engaged J003 3 4 346-9 0.5 J1939 CAN H powertrain (to engine) J003 39 5 349-9 0.5 J1939 CAN L powertrain (to engine) J003 38 6 630-9 0.75 J1939 CAN L powertrain (to transmission) J158 1 7 052-9 0,75 + APC end of travel N002

8 066-9 1.0 + APC hydraulic pressure (rear axle) J201 1 9 088-9 0,75 + APC engine speed at gearbox entry J305 3

10 M033-9 1 Range solenoid valve earth N001 11 M061-9 0,75 Ground of braking solenoid valve (cuna, pneumatic, high pressure) J306 D 11 M070-9 0,75 Ground of park lock J094 6

12 M058-9 0,75 Ground of high pressure oil filter J087 2 12 M079-9 1 Ground of hydraulic pressure (gearbox) J202 2 13 M100-9 0,75 Ground of dephased engine speed J083 2 14 M101-9 0,75 Ground of rear power take-off speed J084 2

15 M027-9 0,75 Differential solenoid valve earth J088 2

16 M021-9 0,75 Ground of 4 wheel drive solenoid valve J089 2

17 M034-9 0,75 Ground of rear power take-off solenoid valve J086 2

18 M065-9 0,75 Ground of reverter under torque module speed J145 2

19 M099-9 0,75 Ground of engine speed at gearbox entry J305 1

20 M102-9 0,75 Tractor speed earth J082 2

21 M028-9 0,75 Ground of rear power take-off brake solenoid valve J085 2