ANTI-ReCOIL eLbOW
CeLLAR NOZZLeS
Transfer the force of a charged fire hose to reduce fatigue and weight of the nozzle.
The “R” series cellar nozzles incorporate the same fog pattern and other features as the standard myster y nozzle. These nozzles project a 30 fog both upwards and downwards. The 1½” nozzle covers a diameter of 26’, the 2½” covers 55’ in diameter. Constructed of brass with nylon ball bearings.
1½” Cellar Nozzle
For 1½” hose. Four outlets; two project horizontally, one downward, one upward. Brass construction, chrome plated finish
736
$
1430-LR.........................
95
For 1.5” NST .................$20500
1269-2309
For 2.5” NST................... $26900
TWIN TIP NOZZLe
2½” Cellar Nozzle - For 2½” hose
4 outlets; two project horizontally, one upward, one downward. Brass construction, chrome plated finish
1430-R.....................
$
916
Lightweight three position nozzle constructed of high quality hard anodized aluminum and plastic. Has 3/16” straight stream, 3 GPM spray or an off position. MODEL TT300 NOZZLE has a 1” NST or NPSH female inlet (specify which) and a ¾” NST male outlet. (Adapter offered below) It is engineered for efficient use of water application on wild land fire.
95
1½” Cellar Nozzle w/applicator
2½” Cellar Nozzle w/applicator
1430-LRa...............$131995
1430-Ra..............$141295
For 1½” hose. Combination of LR cellar nozzle & a 1½” applicator. Brass construction, chrome plated finish
1269-2308
For 2½” hose. Combination of R cellar nozzle and A 2½” applicator. Applicator red, chrome plated nozzle
WAT-R-WALL NOZZLeS Designed to produce a flat, fanshape water curtain. They can be used to protect exposures including apparatus and equipment. At 100 PSI, these nozzles flow 100 GPM and produce a cur tain of water approximately 35’ wide and 20’ high. The swivel head and elbow assembly can be adjusted for best protection and locked in place.
1½” Wat-R-Wall Nozzle
NOZZLeS
2790-TT300 Twin Tip Nozzle ...........$22795 1950-37R11I Adapter, 1”M NPSH x 1” F NST ..............$1495
POK SeWeR NOZZLe Clears blockage in sewer pipes in the hard to reach places with its revolving action, caused by multiple discharge orifices. Made of aluminum or brass.
2½” Wat-R-Wall Nozzle
Rugged, cast brass construction.
(Not Shown) Same as 222 2½” except 2½” free swivel inlet, 2½” male outlet
1½” free swivel inlet, no outlet. Finish with cap and chain. Finish Chrome Chrome plated. Length, 8”, width, 10”, plated. Length, 8¼”, width, 10”, height 8¼”, weight, 11½ lbs. height, 7¼”, weight, 8 lbs.
1269-3672 1” Brass, 40 GPM.........$45700 1269-2278 1.5” Alum, 95 GPM.......$43000 1269-2273 2.5” Alum, 95 GPM.......$48600
1430-222-1.5 .............$47095 1430-222-2.5 ..........$54595
POK WATeR WALL NOZZLe SCOTTY SQuALL WALL
Delivers a flat screen of water to form a protective curtain. The 1.5” nozzle uses 135 gpm and forms a curtain of approximately 85’ wide x 23’ high. The 2.5” nozzle uses 320 gpm and forms a cur tain approximately 105’ wide x 32’ high. Manufactured primarily of anodized aluminum and stainless steel. Inlet is ball bearing female NST.
1269-2238 1.5” Water Wall Nozzle ...............................$31500 1269-2239 2.5” Water Wall Nozzle ...............................$50100 View products & shop online at:
This easy to use device creates a thin wall of water to help cool and protect structures. Attach a unit to a hose end, secure the fitting to the ground and start the flow of water. Available in three different flow rates, 15 gpm, 30 gpm and 50 gpm at 100 psi. Made of extremely durable glass-reinforced nylon. Connection is 1.5” F NH.
3306-4056-aF specify gpm........................................................ $2195
www.heimanfire.com
Prices subject to change without notice
107