2017 Edition
Heckmann Building Products, Inc.
Our 94thYear!
ANCHORS FOR MASONRY TO MASONRY Steel Types: TMS 402 Building Code allows Mill Galvanized anchors for interior walls and requires Stainless Steel, Epoxy Coated, or Hotdip Galvanized after Fabrication for exterior walls. Specify accordingly.
WIRE MASONRY WALL TIES #251 Z Wire Tie: 3/16” and 1/4” dia. wire with 2” bends in lengths of 6”, 8”, and 10”.
251
251
#253 Rectangular Wire Tie: 3/16” dia. wire 2” or 4” wide in lengths of 6”, 8”, 10”, and 12”. 253
#262 Double Eye Rod Anchor: Eye Anchor: 2-3/4” and 4-3/4” long x 2-1/2” wide x 3/16” dia. wire. #263 Double Pintle Tie: Tie: 3”, 4”, and 5” long with 1-1/2” bends. 3/16” dia. wire. (Maximum allowable vertical adjustment is 1-1/4”)
253
262
262 263
263
INTERSECTING PERPENDICULAR WALLS #270 Corrugated Lateral Support Anchor: 20” long x 1-1/4” wide x 14 gage with 2” bend. Corrugated section is 18” long.
272
#271 Lateral Support Anchor: Same dimensions as No. 270 without the corrugation. #272 Z-Type Rigid Steel Anchor: 24” long x 1-1/2” wide x 1/4” thick with 2” bends.
270 271
#273 U-Type Rigid Steel Anchor: Same dimensions as No. 272.
272 273
WIRE MESH WALL TIES #267 Plastic Mesh Wall Tie: Used to prevent grout from falling through the block. Manufactured from 1/4” x 1/4” monofilament material that is corrosion proof and biologically inert. Allows mortar bond between blocks. Available in 100 ft rolls for 6”, 8” and 12” block walls. #268 Metal Lath Wall Tie: 2.5 metal lath, sheared to lengths up to 8 ft x width specified. Install below CMU cores to support mortar or grout fill.
269
#269 Wire Mesh Wall Tie: 2 x 2 x 16 gage galvanized wire. 12” or 16” long x 3”, 4” or 6”, wide or cut to special sizes up to 10 ft long. Use to tie intersecting masonry walls. 267
13
WWW.HECKMANNANCHORS.COM
268
269
INFO@HECKMANNANCHORS.COM