Te20 generator and alternator wiring diagrams

Page 6

Ferguson TEA20 Tractor with a Generator 12V Negative earth system Yellow

D

E

Green

F

Note! If no Ammeter, wire directly from A on Regulator to the starter switch as shown

Yellow Green Strip

A

+ Ammeter

F

Charge Indicator

Fuse 15A

White

D

May also be grounded Black at starter switch

GENERATOR CONTROL BOX (REGULATOR)

Yellow

Circuit for accessories if required

White Yellow Green Strip

Ground return from accessories, if required.

Keyed Ignition Switch

Terminate on the “-” battery terminal or any where on the chassis i.e. the ground bolt on the starter switch

ON/OFF

3

4

Red Black

-

+

Yellow Green Strip

DISTRIBUTOR Firing seq. 1-3-4-2 (Cilinder #1 at front of moter

12V Battery

LUCAS

COIL 12V

-

2

+

1

STARTER MOTOR LUCAS 25079J

Negative Earth

Firing order 1-3-4-2 #1 cylinder is at the front

Can be grounded to the chassis at the Oil Filler Casting or the mounting bolts on the starter motor or one of the steering housing bolts. Anywhere will do so long as there is a good earth connection.

To polarizer the Generator to suite the polarity, remove the F & D leads from the Generator and with a lead connected to the Positive terminal of the battery, flash the Field “F” terminal on the generator til you see a small spark, then replace the leads in the same position as before. NOTE! The Generator must be attached to the chassis and Battery connected to maintain the polarity. Any break in the system will require the process to be repeated.


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.
Te20 generator and alternator wiring diagrams by Heads Tractors - Issuu