Install air line

8.Install Air Line

Notes: Connect the air line with suitable components correctly. Mind the bend angle of the air line which may cause jam or damage to the air line. Use U-shaped wrapping strips to protect the air line against sharp edges of other parts. 1.Install air line according to the diagram of connecting air line(Fig.10-2). 2.The ports of the manifold connect as follows: "TANK" connects the tank, "EXT" connects silencers, "1"connects left-rear air bag, "2" connects right-rear air bag, "3" connects left-front air bag, "4" connects right-front air bag.

9.Installation Software

Notes: The engineer version of H1 APP is appropriate for the people who install and debug the H1 air suspension system. The user version of H1 APP is appropriate for end users. Download H1 APP in Apple Store. The H1 air suspension system must be setup and debugged by the engineer version of H1 APP first, otherwise the remote controller or the user version of H1 APP can't control normally. H1 User H1 Setup

10. Test and adjust

Notes: Use the engineer version of H1 APP to test and adjust. Make sure there is no any obstacles above and under the vehicle before "FULL-AUTOMATIC ADJUSTMEN" start. 1.Check the connection of air line and connectors of each parts, start the car and check whether the air compressors work, whether there is any leakage, whether the system is under control. 2.Turn the operating device WIFI on,connect HF-LPB100 and enter the password(The password consists numbers and uppercase characters, which is under the bar code of the packaging box or ECU housing label.) 02 08