LET’S GET STARTED USING YOUR SYSTEM

How To Arm

ARM STAY

Arm Stay is used when you are in the home (the system will automatically bypass the motion sensors so they are not triggered when you walk about).

STEP 1: Ensure all doors and windows are closed

STEP 2: Ensure “Ready” light indicator is green

STEP 3: Enter code + #3 on keypad

STEP 4: Keypad will beep for 45 seconds and then armed light will illuminate red and keypad will display “Armed”.

Arm Away

Arm Away is used when you are leaving the home (pet immune motion sensors will not be bypassed but activated).

STEP 1: Ensure all doors and windows are closed

STEP 2: Ensure “Ready” light indicator is green

STEP 3: Enter code + #2 on keypad

STEP 4: Keypad will beep for 45 seconds allowing you this time to leave the premises.

Disarm

Disarm (from away) is used when you would like to deactivate the system when returning home.

STEP 1: Using the designated entry point (door), upon opening the door, your keypad will beep, while keypad is beeping, enter your code + number 1.

STEP 2: If the incorrect code is entered, press * and try again. The red Armed indicator light will change to Green and system will display “Disarmed”.