Larus Catalogue Award 2010 by Frank Willems

humanize the territory

www.larus.pt | tel. 0351 234 520 600

Larus Design Urbano distinctions | awards ‘91 - National Design Award ‘93 - Design Stamps, Product Awards ‘94 - Nomination for European Design Award ‘98/99 - National Design Award (Design Global Management) ‘98/99 - National Product Design Award (Expo’98 Signalling System) ‘07 - Hall of fame (ICSID Design edition) ‘07 - Honourable Mention at the DME Award, Design Management European Award ‘08 - Red Dot Design, Award Product Design 2008, lighting and illumination category ‘09 - Sena da Silva National Design Award, winner in the company category ‘09 - Sena da Silva National Design Award, winner in the product category - Rua Series ‘10 - Bid 2010 (Ibero-american Biennal) papeleira tom, dissuasor vesúvio ‘10 - DME Award, Prémio Europ eu de Gestão do Design ‘11 - Red Dot Design Award, Honourable mention, tom paper bin ‘11 - Red Dot Design Award, Winner, + line ‘11 - Face to Face, Prémio de Melhor Conferência

Barcelona

Porto Albergaria-a-Velha

PORT UGAL

Lisboa

Madrid ESPANHA

Larus Design Urbano company info Larus is a Portuguese company that develops and produces urban furniture since 1988. Continuous investigation – design - is the main reason to our growth. We benefit from a close relationship with Architects, designers, as well as autarchy technicians.

design dept.

manufacturing facility

Exit 16 km 248 Aveiro | Viseu

N A1 | A29 Oporto

EN1 | IC2 Oporto

Toll Exit Viseu Albergaria-a-Velha 4km

A25 Aveiro

Exit Coimbra Águeda

A25 Viseu

Zona Industrial

40º40’20 N 8º28’25 O

A1 Lisboa

www.larus.pt | +351 234 520 600

EN1| IC2 Coimbra

Larus Design Urbano Facilities The present building includes the manufacturing facility and all the services related to it: management, design, sales department, manufacturing department, etc. We are planning to extend our facilities, giving greater importance to management and social department, as well as the project team. Thus, considering that innovation is the key factor in our development, it contributes to strengthen our position on the market. Larus is also planning to build a design museum, an auditorium with educational purposes, a showroom, an area for temporary thematic exhibitions, and so on. Projected by Jorge Trindade.

CULTURE

PHILOSOPHY AND VALUES

LOGO

The company culture is a set of values and principles, which inspire and influence the collaborators and employees in their day-to-day habits and practices. Frequently, they stem from the values set by our founder, although, when the employees - its main asset – get deep into the company, they encourage new procedures to improve its operations and results, inspiring a philosophy that sets it apart from its rivals, creating sustainable competitive advantages. It is a dynamic, evolutionary, participating process, which proactively develops autonomy and responsibility in its members, as an immediate result of being a company dedicated to investigation and development.

Larus’ philosophy is displayed in the image of the company, in the logo and its use on the uniforms, in the indoor and outdoor decoration, in the language, in the calm and informal relationship between employees and with the clients, in the concern about meeting our customers’ needs, and, in an original way, in the relationship with external authors who were invited to plant the tree curtain that surrounds the facilities, thus encouraging loyalty to the company.

The seagull, included in the logo, is characteristic of the Aveiro region,and is in the origin of the company’s name.

This reflects the whole responsibility that guides Larus philosophy: beyond all the management skills, a solid sense of understanding and human comprehension, is permanently demanded.

www.larus.pt | +351 234 520 600

Larus means seagull in Latin and reflects a message of freedom (creative ability), balance (between the company’s goals, customer and employee satisfaction and sustainable development) and environmental awareness (ecological concerns, material rationalisation and productive processes, framing of its facilities within the landscape and product suitability to the open spaces they are aimed at).

FURNITURE

LIGHTING

+ line

Cais line

Beburb drinking Fountain

IP6 bench

Balarés line

Urbus drinking fountain

Solar pole

Serralves line

Mateo line

Linea drinking fountain

Ufo pole

Rua line

Tango line

Ufo line

Axis line

Lótus line

Embondeiro line

Comendador line

Arc line

Parque line

Matriz bench

Arqui line

Alta bench

Urbus paper bin

Sueste line

Tom | Point paper bin

Daciano da Costa line

Sac paper bin

Degrau bench

Waste Separation Bins

17º lighting pole

KIOSKS

SIGNAGE

SHELTERS

ACESSORIES

Mondrian

Larus Pole

Mupis

Grates

Arqui

Quadris | Rondo Line

Arqui

Jardim

Check-Up Track

Daciano da Costa

Fradinhos

P贸rtico

Bollards

Beach support

Watchtower

Burb bollards

Kiosks Esplanades

Ves煤vio bollards skips | dumpsters for canine dejections

Parking

Shade structures

Sombra pergola

www.larus.pt | +351 234 520 600

+ line design João Nunes

“A sense of collection between different pieces, through a constructive concept: a common structural element evocative of a precise conceptual universe, that supports each functional performance. Neutral, humble and discreet, with objects that do not contaminate space, to the extent that public space is not built on furniture, which must be contained and have the capacity to not erase all else surrounding it.” João Nunes

Furniture

www.larus.pt | +351 234 520 600

Urban Signage

Institutional Signage

Guide rail for pedestrian walkways

200

Tree Grates

1000

450

600

420

3000

1200 2000

300

800

1200|1500

120 560

700

1200|1500

920

1200 bench

Parking

detail 5020 3600

1010 400

802

drinking fountain

paper bin

100

bollard fixed _ retractable _ rebuttable 80

200

bench

800

1000

700

200

500 300

300

Euronorm 1561:1997 S275JR

Tali

liquid painting

120 all’acqua

Other colors may be delivered on request.

AISI 304 grinded

800

Bench Feet: Cast Iron, Euronorm 1561:1997 (LR FF1), blasted, metalized and painted. Standard version in forge enamel (LR EF1). Seating: Tali wood, treated with wood filler all’acqua 420 (LR I1), by immersion, to improve the adhesion of the varnish 120 all’acqua (LR V1) with butil diglicol Xi R36, and to protect against U.V. rays. Rods to support wood sleds in steel S275JR (LR A1) metalized and painted. Standard version in forge enamel (LR EF1). Anchorage: with threaded rods in stainless steel AISI 304 (LR AX1), anchored directly to the pavement / foundation with chemical plugs (LR F1). Paper bin Support: Cast Iron, Euronorm 1561:1997 (LR FF1), blasted, metalized and painted. Standard version in forge enamel (LR EF1). Bucket: in steel S275JR (LR A1) metalized and painted. Standard version in forge enamel (LR EF1). Inner ring to fix the plastic bag: stainless steel AISI 304 (LR AX1). Anchorage: anchored directly to foundation (LR F3).

Drinking Fountain Body: Cast Iron, Euronorm 1561:1997 (LR FF1), blasted, metalized and painted. Standard version in forge enamel (LR EF1). Tube and handgrip: stainless steel AISI 304 (LR AX1). Anchorage: anchored directly to foundation. The foundation can be a solid base or a prefabricated base to receive the water (LR F3). Bollard Body: Cast Iron, Euronorm 1561:1997 (LR FF1), blasted, metalized and painted. Standard version in forge enamel (LR EF1). Anchorage: anchored directly to foundation (LR F3). Tree Grate Body: Cast Iron, Euronorm 1561:1997 (LR FF1), blasted, metalized and painted. Standard version in forge enamel (LR EF1). Anchorage: anchored directly to foundation (LR F3). Foundations to be executed by the client according to the technical information available upon request.

IP6 bench design Jesús Irisarri | Piñera “The design comes from territories outside the concept of furniture. The idea is to design a mechanism that generates a meeting space, a central point to be in group. Rather than proposing a particular use, it opens up a range of possible uses, different ways of being, bound and generated from the relationships established between users. Thus, the way to sit, rest or lie down will depend on the number and disposal of the group of people that converge to the equipment.” Jesús Irisarri

Furniture www.larus.pt | +351 234 520 600

720

2600

2000

DOWLEX NG 2432.10NE

AISI 304 grinded

RAL colors available All RAL references below are made by approximation, so slight variations may occur. Other colors may be delivered on request.

Bench Rotomolded plastic in polyethylene resin DOWLEX NG 2432.10NE (LR R1). Possibility to drain rain water with an accessory in stainless steel AISI 304 (LR AX1) Inner Lighting: (optional) White Bench: luminaire IP65 equipped with fluorescent lamp 18W T8 type. Other colors: luminaire IP65 equipped with fluorescent lamps 2x18W T8 type. Weight: 90 kg. Anchorage: with threaded rods in stainless steel AISI 304 (LR AX1), anchored directly to the pavement / foundation with chemical plugs (LR F1). Foundations to be executed by the client according to the technical information available upon request. Water drainage for outdoor benches

upper side of the bench

RAL 5003 RAL 5017

stainless steel part

RAL 6029 RAL 6024 RAL 1021

stainless steel tube water drainage Ă&#x2DC;16x1,5mm

RAL 1016 RAL 3000 RAL 7013 RAL 9001 RAL 9004

lower side of the bench

Serralves line design Álvaro Siza “The classic urban furniture from the eighteen hundreds serves as a base to the ergonomic and maintenance study.” Álvaro Siza

Furniture www.larus.pt | +351 234 520 600

Paper bin

Bench with backrest

505 815

1800

950 770 416

opening system

optional ashtray

410

150

Euronorm 1561:1997

Tali

120 all’acqua

liquid painting

Other colors may be delivered on request. S275JR

DOWLEX NG 2432.10NE

AISI 304 grinded

Bench Feet: Cast Iron, Euronorm 1561:1997 (LR FF1), blasted, metalized and painted. Standard version in forge enamel (LR EF1). Seating: Tali wood, treated with wood filler all’acqua 420 (LR I1), by immersion, to improve the adhesion of the varnish 120 all’acqua (LR V1) with butil diglicol Xi R36, and to protect against U.V. rays, or enameled. Standard version in RAL 7042 (LR RA5). Anchorage: with threaded rods in stainless steel AISI 304 (LR AX1), anchored directly to the pavement / foundation with chemical plugs (LR F1). Paper Bin Steel bars S275JR (LR A1), metalized and painted. Standard version in forge enamel (LR EF1). Inner bucket: black rotomolded plastic in polyethylene resin DOWLEX NG 2432.10NE (LR R1). Access door with a triangular key lock. Ashtray (optional): tilting in stainless steel AISI 304 (LR AX1). Anchorage: anchor previously fixed to the foundation (LR F2). Foundations to be executed by the client according to the technical information available upon request.

Rua line design J.M.Carvalho Araújo “Streets, squares and public gardens should be a big living room, comfortably furnished. The urban furniture should be stable, firm, oriented, resistant to vandalism, reparable and adaptable to its users. Preferably, it should not retain rain water, being able to dry fast. In addition, it should not have a superfluous exposure in order to respect the surrounding. A simple design could be the correct answer, with a neat and vigorous design susceptible of further adaptations, using different acces¬sories, to other situations without ever losing its identity.” J. M. Carvalho Araújo

Furniture www.larus.pt | +351 234 520 600

420

Single simple bench

Option: curved 420

Triple simple bench

Option: curved 420

Option: drilled

1800

420

Bicycle rack

Paper bin 900 420

105

S275JR

Bench Steel plate S275JR (LR A1) bent with a radius of 50mm, metalized. Anchorage: with threaded rods in stainless steel AISI 304 (LR AX1), anchored directly to the pavement / foundation with chemical plugs (LR F1). Paper Bin Steel plate S275JR (LR A1) bent with a radius of 50mm, metalized. Anchorage: with threaded rods in stainless steel AISI 304 (LR AX1), anchored directly to the pavement / foundation with chemical plugs (LR F1). Bicycle Racks Steel plate S275JR (LR A1) bent with a radius of 50mm, metalized. Anchorage: with threaded rods in stainless steel AISI 304 (LR AX1), anchored directly to the pavement / foundation with chemical plugs (LR F1). Foundations to be executed by the client according to the technical information available upon request.

Axis line design Pedro Martins Pereira | Larus The Axis bench was developed with an ergonomic seating line. Its seating surface is of Tali, wood of high density. It is protected with a non toxic varnish and attached to a support leg which is fixed to the ground and made of Euronorm cast iron 1561:19997, metallized and painted. The resistant axial leg allows us to obtain a simple design, of easy integration in historical or contemporary, urban or rural environments. The other elements of this line follow the same principle of depurated forms.

Furniture www.larus.pt | +351 234 520 600

Bench with backrest | doble

Chair

1800 | 2500 | 3000

500

1385

652

445

Bench without backrest

Table 700

1800

700

608

500 | 1800 | 2500 | 3000

710 445

Paper Bin

Bench with backrest wall Mounting 120

500|1000

1165

528 445

565

Benches Legs: BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection. Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2). Table Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection. Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2). Paper Bin Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1). Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection. Container: Rotomoulded plastic with DOWLEX NG 2432.10NE (LR R1) polyethylene resin. Lock: triangular key in AISI 316 (LR R1) stainless steel. Capacity: 11L. Fixings: fixed directly to the ground by lead solder (LR F3). Foundations to be carried out by the client according to technical information made available

Furniture www.larus.pt | +351 234 520 600

Banco com costas

Banco com costas duplo 1800|2500|3000

667

500|1800|2500|3000

762 445

1490 Banco sem costas 500|1800|2500|3000

608

1490

Comendador line design Daciano da Costa Using elements that recur in the shapes of the pieces, that for decades made Alba Factories a recognized name, Daciano da Costa designed this urban furniture line, named after the founder of this company, Augusto Martins Pereira, one of the anonymous artists who designed the cultural identity with which we identify ourselves. Benches, public lighting, fire hydrants and pieces that he designed for his home, such as banisters, lamp holders, doors and trims, repeating vertical and horizontal lines, were the references for the â&#x20AC;&#x153;Comendador Lineâ&#x20AC;?.

Furniture www.larus.pt | +351 234 520 600

signage

1000

330

3300

bench with backrest

drinking fountain Ø400

1800

700

800

Bench Legs: BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1). Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection. Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

Signage Top and base (post): BS EN 1561:1997 cast iron, (LRFF1), stripped, metallized and painted. Standard version in forge enamel (LR EF1). Post: anodized aluminium, profile C177006 (LR AL1), C177.007 (LR AL2), C177.009 (LR AL3). Plates: OL.838059.1 (AP1 LR) aluminium, RAL 3004 (LR RA1) lacquered. Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

Drinking fountain Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1). Spout and timer: chrome plated brass. Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

Foundations to be carried out by the client according to technical information made available.

Matriz bench design Daciano da Costa Urban furniture project which takes the graphical matrix as a geometrical rule, thus enabling it to be adaptable to the design of the floor where the equipment is being installed.

Furniture www.larus.pt | +351 234 520 600

1500

610 35 85

695 355 425

Ø32

Bench Legs: S275JR (LR A1) steel tube and bar, metallized and painted. Standard version in forge enamel (LR EF1). Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection. Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1). Foundations to be carried out by the client according to technical information made available.

Alta bench design Daciano da Costa â&#x20AC;&#x153;The exaggeration, the modular clarity and the predominance of a volumetric and orthogonal expression, was designed as a counterpoint to the elegance of the delicate curved shapes, giving the piece an undeniable contemporaneity.â&#x20AC;? Daciano da Costa

Furniture www.larus.pt | +351 234 520 600

1420

720 430

1600

485 70

Bench Legs: BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1). Mortise: S275JR (LR A1) steel bar, stripped, metallized and painted. Standard version in forge enamel (LR EF1). Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) allâ&#x20AC;&#x2122;acqua for better absorption of the 120 (LR V1) allâ&#x20AC;&#x2122;acqua varnish with Xi R36 butyl diglicol, for UV protection. Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the pavement/ground with lead solder with chemical bushing (LR F1). Foundations to be carried out by the client according to technical information made available.

Sueste line design Daciano da Costa “Family of objects with a basis of reference: the whitewashed wall, which can be seen as an “extension” to the urban and rural landscape. A reflection of the artistic quality of vernacular architecture, converging the needs of use and enjoyment.” Daciano da Costa

Furniture www.larus.pt | +351 234 520 600

Bench without backrest 600 | 1820

600

440

420

Bench with backrest 1820 | 1200 | 600

600

770 450

Fountain

Planter

Drinking Fountain

850 470

470

600 380 716 1500

Bench with backrest - concrete Betão C30/37 XC4 (LR B1) de cimento branco. Bench without backrest - concrete Betão C30/37 XC4 (LR B1) de cimento branco. Bench without backrest - concrete and wood White C30/37 XC4 (LR B1) cement concrete Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection. Mortise: S275JR (LR A1) steel bar, stripped, metallized and painted. Drinking fountain Body: white C30/37 XC4 (LR B1) cement concrete. Spout: triggered by a delayed tap in chrome plated brass. Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the pavement/ground with lead solder with chemical bushing (LR F1).

Fountain Body: white C30/37 XC4 (LR B1) cement concrete. Source: S 355 J2 G2W (LR AC1) Corten steel-A. Planter (Option A) In white C30/37 XC4 (LR B1) cement concrete. Vase: S 355 J2 G2W (LR AC1) Corten steel-A. Planter (Option B) Vase: S 355 J2 G2W (LR AC1) Corten steel-A Foundations to be carried out by the client according to technical information made available.

Daciano da Costa line design Daciano da Costa References were the historical components, of an austere design, of the city and work of Jorge Vieira (1926-1998), “a sculptor of popular Mediterranean expression, figurativeabstractionist, who violently deconstructed the human figure”, to quote the words of Prof. Daciano, who has named this a “design of citation”, because of the recurrence of materials and technical solutions used by his friend: the corten steel and the pieces supported by T-shapes, thus suggesting the three support points.

Furniture www.larus.pt | +351 234 520 600

Bench with backrest BN1

Bench without backrest BN2

1820 570

1820 770 470

570

Double bench BN1+BN2 3630

570

770 470

Paper bin PL2

Bench without backrest BN5

313

462 1500

460

Anchor bolt 800

465

BN1 S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection. Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

BN5 S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood (cleaver), treated by immersion, with pervasive all’aqua 420 (LR I1) for better absoption of the all’aqua 120 (LR V1) varnish with butyl diglicol Xi R36, for UV protection. Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

BN2 S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection. Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

Paper Bin PL2 S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1). Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2). Foundations to be carried out by the client according to technical information made available. S 355 J2 G2W (LR AC1) corten steel and Tabebuia [aka Ipê or Trumpet Tree] wood solution is only being used in the city of Beja.

Degrau bench design InĂŞs Lobo Benches which easily adapt to uneven grounds, allowing younger users to have a fun time.

Furniture www.larus.pt | +351 234 520 600

1500

500 750 LT

1500

Bench White C30/37 XC4 (LR B1) cement concrete.

250

Cais line design Pedro Martins Pereira When thinking of the pier [Cais], one is reminded of sheltered vessels, of forgotten, entwined or stressed cables moored to cast iron bollards, that resist the corrosion of the maritime environment with a enduring stubbornness. The Cais Line takes inspiration from these elements; in the enjoyment of seaside promenades.

Furniture www.larus.pt | +351 234 520 600

Drinking fountain

Bollards

850

900 500 240

320

Bench with backrest

Ø140

Bench without backrest

Ø240

Paper bin 335

400

460

526 400

445

905

425

590

420

445

300

420

445

Bench with backrest BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1) Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the pavement/ground with lead solder with chemical bushing (LR F1). Bench without backrest BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1) Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1). Drinking Fountain BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1) Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).

300

Bollards BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1) Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1). Paper bin Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Container: AISI 316 (LR AX2) steel plate Triangular lock in AISI 316 (LR AX2) stainless steel Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1). Foundations to be carried out by the client according to technical information made available.

BalarĂŠs line design Vier Arquitectos Furniture line with bench, table and barbecue in reinforced concrete (HA-30-B-12-lla) and steel.

Furniture www.larus.pt | +351 234 520 600

Table

Bench without backrest

750

550

1800 | 2400

750

440

Bench without backrest

Paper bin

440

300

1560

Table and benches set

550

600

Perforation options available 570

740

1000

760

Boollard

Barbecue 1400 120

800

700

900

1150

600

120

Bench without backrest C30/37 XC4 (LR B1) Concrete. Bench with backrest C30/37 XC4 (LR B1) Concrete. Back: galvanized S275JR (LR A1) steel plate. Bollard C30/37 XC4 (LR B1) Concrete. Table C30/37 XC4 (LR B1) Concrete. Barbecue Support: C30/37 XC4 (LR B1) concrete. Body: galvanized S275JR (LR A1) steel plate.

Paper bin Body: galvanized S275JR (LR A1) steel plate. Option: perforated. Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1). Foundations to be carried out by the client according to technical information made available.

Mateo Line design Josep LluĂs Mateo Line with movable seating, allowing for grouping of the equipment in accordance with the desires of its users, which is in line with the transformation and modernization of the urban space. Equipment that allows for a new playful use whilst at the same time having a simplicity that respects the environment.

Furniture www.larus.pt | +351 234 520 600

Fixed | movable chair

900

Sliding Rail

610

Paper bin 45 L

Miradouro bench 2160

350

500

900

750

Movable chair Structure: circular tubular profile in AISI 316 (LR AX2) stainless steel. Back and seat: AISI 316 (LR AX2) steel plate, brushed on the upper side and perforated with loosely spaced circular holes. Legs: front feet with circular base in hard black plastic; back feet with cast stainless steel (LR IF1) attachment, with a double carriage rolling system, allowing for movement of the seat along the rail. Fixed chair Structure: circular tubular profile in AISI 316 (LR AX2) stainless steel. Back and seat: AISI 316 (LR AX2) steel plate, brushed on the upper side and perforated with loosely spaced circular holes. Legs: front feet with circular base in hard black plastic; back feet with cast stainless steel (LR IF1) attachment. Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2). Miradouro bench Structure: circular tubular profile in AISI 316 (LR AX2) stainless steel. Back and seat: AISI 316 (LR AX2) single steel plate, brushed on the upper side and perforated with loosely spaced circular holes. Legs: front feet with circular base in hard black plastic; back legs with cast stainless steel (LR AF1) attachment. Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

Paper bin Bin bucket: made of AISI 316 (LR AX2) stainless steel plate, brushed on the upper side, perforated with loosely spaced circular holes, with a non perforated band around the top and bottom perimeter of the bin. Bottom of the bin formed by a AISI 316 (LR AX2) stainless steel plate Foot: AISI 316 (LR AX2) steel tube and bar, with a brushed finish. Base: made of AISI 316 (LR AX2) stainless steel plate, with a brushed finish. Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2). Sliding Rail In S752JR (LR A1) stainless steel plate, stripped, metallized and painted. Foundations to be carried out by the client according to technical information made available.

Tango line design Pedro Martins Pereira | Larus The configuration of a womanâ&#x20AC;&#x2122;s back, when held by her partnerâ&#x20AC;&#x2122;s arm, was the idea that went into the design of the Tango bench this idea being pursued throughout the other elements of this line.

Furniture www.larus.pt | +351 234 520 600

Bench with backrest

Table 1350

900

760

735

2600

900

Paper bin

Chair without backrest | with backrest 300

340 container 780

882

478 door

anchor bolt

435

600

444

515

480 280

Bench with backrest S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection. Mortise: S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

Table S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglycol, for UV protection. Mortise: S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

Paper bin S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

Chair without backrest | with backrest S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglycol, for UV protection. Mortise: S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2). Foundations to be carried out by the client according to technical information made available.

L贸tus line design ImaginarQ Minimalistic conception which is supported by two-dimensional shapes, reinforcing a robust presence. Its formal simplicity facilitates integration into a diversity of environments.

Furniture www.larus.pt | +351 234 520 600

Double bench with backrest

Bench with backrest 1268

2000 | 600

600 | 2000

Planter

840

820 1015

915 585

436

Bench without backrest

Paper bin

Table

400

2000

905

1800 800 501

738

430

Bench without backrest

Bicycle rack 2100

290

600

550

475

Bench with backrest | double S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglycol, for UV protection. Mortise: S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2). Paper bin Body: S275JR sheet steel (LR A1), stripped, metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglycol, for UV protection. Inner ring: S275JR (LR A1) steel bar, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

Bicycle rack S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2). Table S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglycol, for UV protection. Mortise: S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2). Planter S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglycol, for UV protection. Foundations to be carried out by the client according to technical information made available.

Arc line design Pedro Martins Pereira | Larus Formal simplicity that does not hide the contrast between its support legs, giving a more intense presence, a subtle seat which results in an easily integrated piece of equipment.

Furniture www.larus.pt | +351 234 520 600

Table

Bench

655 450 760 460

1720

Bench S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection. Mortise: S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2)

2120

Table S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection. Mortise: S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2). Foundations to be carried out by the client according to technical information made available.

Arqui line design Jorge Trindade | Larus A line for modern architectural solutions, with a predominance of high-quality dense materials, which do not peel off the ground.

Furniture www.larus.pt | +351 234 520 600

Bench without backrest

400

1100

400

500

400

1900

500

ashtray

Paper bin

Papeleira em bet達o 354

478

354

796

734

A 90 detail A

Bench without backrest Granite (LR G1) with BS EN 1561:1997 (LR FF1) cast iron seat, stripped, metallized and painted. Standard version in forge enamel (LR EF1). Paper bin Body: S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1). Door: BS EN 1561:1997 (LR FF1) cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1). Container: Rotomoulded plastic with DOWLEX NG 2432.10NE (LR R1) polyethylene resin. Lock: triangular key in AISI 316 (LR AX1) stainless steel. Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2). Paper Bin (concrete) Body: C30/37 XC4 (LR B1) Concrete. Door: BS EN 1561:1997 (LR FF1) cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1). Container: Rotomoulded plastic with DOWLEX NG 2432.10NE (LR R1) polyethylene resin. Lock: triangular key in AISI 316 (LR AX1) stainless steel. Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2). Foundations to be carried out by the client according to technical information made available.

Urbus paper bin design Pedro Martins Pereira | Larus An object which makes a statement with its formal and functional simplicity. Both sturdy and light.

Furniture www.larus.pt | +351 234 520 600

Ă&#x2DC;370

660

Paper bin BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1) Container: Rotomoulded plastic with DOWLEX NG 2432.10NE (LR R1) polyethylene resin Lock: triangular key in AISI 316 (LR R1) stainless steel. Capacity: 40L Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2). Foundations to be carried out by the client according to technical information made available.

Point | Tom paper bin design Pedro Martins Pereira | Larus Lightness accentuated by the stem-like support attaching it to the ground, giving the idea of levitation. Point Clean, neutral language, appropriate to diverse typologies. Tom Small, fun Paper bin.

Furniture www.larus.pt | +351 234 520 600

Paper bin Point

Ø424

600

300

Paper bin Tom

500

Ø200

300

Ø200

300

Ø350

Compact soil (urban) Concrete foundation Capacity: 42,5 L

Ø350

Compact soil (urban) Concrete foundation Capacity: 40 L

Sandy soil (seaside)

Point Paper bin Body: BS EN 1561:1997 (LR FF1) standard, stripped, metallized and painted. Standard version in forge enamel (LR EF1). Container: Rotomoulded plastic with DOWLEX NG 2432.10NE (LR R1) polyethylene resin. Support: S275JR (LR A1) steel tube, metallized and painted. Lock: triangular key in AISI 316 (LR AX1) stainless steel. Fixing: element fixed to the ground with lead solder (LR F3).

RAL colors available All RAL references below are made by approximation, so slight variations may occur. Other colors may be delivered on request. RAL 5003 RAL 5017 RAL 6029 RAL 6024 RAL 1021 RAL 1016 RAL 3000 RAL 7013 RAL 9001 RAL 9004

Sandy soil (seaside)

Tom Paper bin Body: rotomoulded plastic with DOWLEX NG 2432.10NE (LR R1) polyethylene resin. Container: Rotomoulded plastic with DOWLEX NG 2432.10NE (LR R1). Support: S275JR (LR A1) steel tube, metallized and painted. Standard version in RAL 7016 (LA RA6). Lock: triangular key in AISI 316 (LR AX1) stainless steel. Fixing: element fixed to the ground with lead solder (LR F3). Foundations to be carried out by the client according to technical information made available.

Sac paper bin design Pedro Martins Pereira | Larus Use of high-quality materials and minimal use of components.

Furniture www.larus.pt | +351 234 520 600

Ă&#x2DC;400

490

900

Body: AISI 304 (LR AX1) steel plate. Inner ring: AISI 304 (LR AX1) stainless steel rod. Support and lid: BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in RAL 7016 (LA RA6). Lock: triangular key in AISI 316 (LR AX1) stainless steel. Capacity: 30L. Fixing: element fixed to the ground with lead solder (LR F3). Foundations to be carried out by the client according to technical information made available.

Waste Separation Bins design Larus Beach Eco Points, providing an effective adaptation to seaside locations, with good sized bins in appealing colours.

Furniture www.larus.pt | +351 234 520 600

925

200

Ă&#x2DC;500

Body and lid: rotomoulded plastic with DOWLEX NG 2432.10NE (LR R1) polyethylene resin in blue, yellow, green and grey. Waste disposal through side opening. Connection between lid and main body through AISI 304 (LR AX1) stainless steel hinge, preventing the lid from being stolen. Vinyl sticker on the lid indicates type of waste. Support: S275JR (LR A1) galvanized steel tube. Inner container: rotomoulded plastic with DOWLEX NG 2432.10NE (LR R1) polyethylene resin for the placing of bin liners. Capacity: 105L Fixing: element fixed to the ground with lead solder (LR F3). Foundations to be carried out by the client according to technical information made available. RAL colors available All RAL references below are made by approximation, so slight variations may occur. Other colors may be delivered on request. RAL 5003 RAL 5017 RAL 6029 RAL 6024 RAL 1021 RAL 1016 RAL 3000 RAL 7013 RAL 9001 RAL 9004

Beburb Drinking Fountain design Carlos Pereira For use in public spaces, allowing all users to easily and effectively access the water irrespective of their mobility or physical condition. By flexing the spring, the water flow mechanism is activated allowing one to determine the direction of the water jet.

Furniture www.larus.pt | +351 234 520 600

B01

B02

Size height 1000mm diameter 2000mm

B01 Spout: AISI 304 (LR AX1) stainless steel Base: Granite Fixing: element fixed to the ground with lead solder (LR F3). B02 Spout: AISI 304 (LR AX1) stainless steel Base: AISI 304 (LR AX1) steel plate Fixing: element fixed to the ground with lead solder (LR F3). B03 (stainless steel grid) Spout: AISI 304 (LR AX1) stainless steel Grate: AISI 304 (LR AX1) stainless steel Fixing: element fixed to the ground with lead solder (LR F3). Foundations to be carried out by the client according to technical information made available.

B03

Urbus drinking fountain design Pedro Martins Pereira | Larus Elegant, conventional option. Gravi Version.

Furniture www.larus.pt | +351 234 520 600

Fixings and water connection

Urbus

Gravi

Ø375

400

Cut-off tap with ½ inch screw ½ inch male connector Ø 6mm exterior 1mm wall

Discharge hose Ø 23mm exterior 3,5mm wall

903

Drilled base for fastening by screws

Ø270

Ø90

15 Ø14

Ø190

Bowl: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Tube and base: AISI 316 (LR AX2) stainless steel stripped, metallized and painted. Spout and timer button: chrome plated brass. Gravi version: body made of conglomerated cement gravel, surface washed. Fixing: element fixed to the ground with lead solder (LR F3). Foundations to be carried out by the client according to technical information made available.

LĂnea drinking fountain design Pedro Martins Pereira | Larus A choice of contemporary architecture in round or square versions.

Furniture www.larus.pt | +351 234 520 600

Round line

Cubic line

Fixings and water connection

400

Cut-off tap with ½ inch screw ½ inch male connector Ø 6mm exterior 1mm wall

Discharge hose Ø 23mm exterior 3,5mm wall

900

Drilled base for screwing fixings

Ø270

15 Ø14

200

Ø230

200

Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Spout and timer button: chrome plated brass. Options: Round (round) and Cubic (square) Fixing: element fixed to the ground with lead solder (LR F3). Foundations to be carried out by the client according to technical information made available.

Parque line design Pedro Martins Pereira | Larus Simple and functional line, easy to remove when transporting to a new location, due to the nature of its installation characteristics and adaptability to different scales.

Furniture www.larus.pt | +351 234 520 600

750

750 450 LT

450 LT 200

200 900

425

1490 650

1840 1000 300

Backrest for bench

Section to be placed underground

Table and benches Structure: S275JR (LR A1) steel tube stripped, metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) allâ&#x20AC;&#x2122;acqua for better absorption of the 120 (LR V1) allâ&#x20AC;&#x2122;acqua varnish with Xi R36 butyl diglicol, for UV protection. Fixing: The section to be placed underground (20cm) has been painted with three complementary antioxidant paints. There is no need to bolt the structure, allowing it to be moved to a new location. It is also possible to have a 2 bench version, as the equipment can be attached by bushings or anchor bolts.

Ufo Line design Pedro Martins Pereira Line consisting of bollard, cycle stand, ashtray and dog waste bin, formally exploring the linearity of the iron bar, as a characterizing element.

Acessories www.larus.pt | +351 234 520 600

bench with armrest

bench without armrest

dog waste bins

ashtray

paper bin

120

250

400 235

1800 630

1000

1000 860

430

100

150 450

bicycle rack

fixed bollard

bollard rebuttable

bollard retractable

900

600 45 80

Benches Legs: BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) allâ&#x20AC;&#x2122;acqua for better absorption of the 120 (LR V1) allâ&#x20AC;&#x2122;acqua varnish with Xi R36 butyl diglicol, for UV protection. Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2). Paper Bin S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1). Container: Rotomoulded plastic with DOWLEX NG 2432.10NE (LR R1) polyethylene resin. Lock: triangular key in AISI 316 (LR R1) stainless steel. Capacity: 35L. Fixing: element fixed to the ground with lead solder (LR F3). Bicycle rack Body: S275JR (LR A1) steel bar stripped, metallized and painted. Standard version in forge enamel (LR EF1). Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).

Dog waste bins Body: S275JR (LR A1) steel bar stripped, metallized and painted. Standard version in forge enamel (LR EF1). Bin and bag dispenser: AISI 304 (LR AX1) stainless steel, brushed. Fixing: element fixed to the ground with lead solder (LR F3). Ashtray Body: S275JR (LR A1) steel bar stripped, metallized and painted. Standard version in forge enamel (LR EF1) Containers: brushed AISI 304 (LR AX1) stainless steel. Fixing: element fixed to the ground with lead solder (LR F3). Fixed bollard Body: S275JR (LR A1) steel bar stripped, metallized and painted. Standard version in forge enamel (LR EF1). Fixing: element fixed to the ground with lead solder (LR F3). Retractable bollard Body: S275JR (LR A1) steel bar stripped, metallized and painted. Standard version in forge enamel (LR EF1). Fixing: element fixed to the ground with lead solder (LR F3). Rebuttable bollard Body: S275JR (LR A1) steel bar stripped, metallized and painted. Standard version in forge enamel (LR EF1). Fixing: element fixed to the ground with lead solder (LR F3). Foundations to be carried out by the client according to technical information made available

Embondeiro Line design Pedro Martins Pereira Angola. Savannah. The playful, grotesque and surprising physiognomy of the secular baobab tree, is distinguished within this lonely and warm wilderness. The historical and cultural reference intervened in the street furniture project, strengthening its local identity. The cast iron, a noble material, gives body to the trunk and the branches of the tree, which support the slats of the park benches. The timber used is autochthonous. The bollards, in cast iron for the same reason, suggest the trunk, but more elegant. They also served as support to the paper bin, of considerable dimensions, as is local practice, whose basket is produced in metalized and painted steel, galvanized steel or stainless steel.

Furniture www.larus.pt | +351 234 520 600

Bench with backrest

Bollard

648

817

800

450 405

1800

120

52,5

1400

Bench without backrest

Paper bin

Ø400

650 480 800

450 405

1800/1300 1400/900

Benches Legs: BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1). Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection. Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).

Paper Bin Leg: BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1). Container: Rotomoulded plastic with DOWLEX NG 2432.10NE (LR R1) polyethylene resin. Lock: triangular key in AISI 316 (LR R1) stainless steel. Capacity: 60L Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

Bollards Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1). Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

Foundations to be carried out by the client according to technical information made available.

17Âş lighting pole design Francisco ProvidĂŞncia The inclined angle unites the components of this light: the vertical elevation of the pole and the horizontal projection arm. Inside the tube of the lamp, there is an almost vertical projection of light. The cut in the tube shows the intersection between the cylinder and the illumination cone. Maintenance is made easy, thanks to its upper access. The brief and easily recycled concept, inspires a quality of life reduced to essentials, to life in freedom.

Lighting www.larus.pt | +351 234 520 600

65ยบ

453

17ยบ

500 500

5500

ร 114

Pole Tube: AISI 304 (LR AX1) stainless steel or S275JR (LR A1) steel metallized and painted. Standard version in forge enamel (LR EF1). Light bulb: 70/150W metal iodides, Colour. temperature: 2800K IRC > 80 Electronic ballast. Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2). Foundations to be carried out by the client according to technical information made available. maintenance Average luminance (70/150W) - With a 6m removal - 37/80Lux - With an 8m removal - 32/70Lux - With a 10m removal - 23/50Lux

Photometric Plan 3 poles 150w Lamp 10m Spacing Track width of 5.5m

150w

110 100 90

80 70

60 3

50 40

30 20

10 0m 10

Lux

Solar pole design Francisco ProvidĂŞncia Lighting of pedestrian zones, incorporating technical components in the pole, allowing for a discreet presence. Solar solution with LED technology, ensuring higher energy efficiency and better quality of lighting, leading to greater safety with low maintenance costs. Environmentally friendly product.

Lighting www.larus.pt | +351 234 520 600

1000 1000

Ø159

The low emission above the inclination of 56º ensures both low levels of glare and light pollution.

45º 120º

5000 11º

Tube: S275JR (LR A1) steel metallized and painted. Standard version in forge enamel (LR EF1) Lamp module and photovoltaic panel: rotomoulded plastic in DOWLEX NG 2432.10NE (LR R1) polyethylene resin. Diffuser: High optical performance polycarbonate, with UV and static protection treatment. Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2). Foundations to be carried out by the client according to technical information made available. Possibility of intelligent management: - optimized energy consumption in accordance with environmental lighting conditions (through flow regulation) - centralized and remote management, - Real time weather forecast (monitoring and management of infrastructure);

3500

12VDC/15Ah Gel batteries 45W Photovoltaic panel LED Module: - Luminous Flux ~920lm - Power ~ 11.5W - Colour temperature 5300ºK (typical) - IRC > 70 - High lighting uniformity - Compliance with EN13201-2 standard - IP66/IK08 - 4 day autonomy (16h/day), in adverse weather conditions - Ideal spacing between columns: 3.5x mounting height (H) - Recommended mounting height: 3.5 to 4m - Coverage area of 3.5xHxH m2 (where “H” is the mounting height)

Mounting height

Spacing

Coverage area

(H)

10,5m

31,5m²

3,5m

12,25m

42,8m²

14m

56m²

4,5m

15,75m

70,8m²

Photometric Plan 17,5 15 12,5 10

7,5 5

3,5x H

Ufo pole design Pedro Martins Pereira Lighting for cycling or pedestrian zones, incorporating technical components in the upper portion allowing for a discreet presence. Solar solution with LED technology, ensuring higher energy efficiency and better quality of lighting, leading to greater safety with low maintenance costs. Environmentally friendly product.

Lighting www.larus.pt | +351 234 520 600

Ø546

538

5750 max.5000

12VDC/15Ah Gel batteries 45W Photovoltaic panel LED Module: - Luminous Flux ~920lm - Power ~ 11.5W - Colour temperature 5300ºK (typical) - IRC > 70 - High lighting uniformity - Compliance with EN13201-2 standard - IP66/IK08 - 4 day autonomy (16h/day), in adverse weather conditions - Ideal spacing between columns: 3.5x mounting height (H) - Recommended mounting height: 3.5 to 5m - Coverage area of 3.5xHxH m2 (where “H” is the mounting height)

Possibility of intelligent management: - optimized energy consumption in accordance with environmental lighting conditions (through flow regulation) - centralized and remote management, - Real time weather forecast (monitoring and management of infrastructure);

Foundations to be carried out by the client according to technical information made available.

Mounting height

Spacing

Coverage area

(H)

10,5m

31,5m²

3,5m

12,25m

42,8m²

14m

56m²

4,5m

15,75m

70,8m²

Photometric Plan

3,5xH 17,5 Cost optimization for the use in cycle paths (with reduced light intensity) Spacing between poles, 22m; lamp, 5m

15 12,5 10 7,5

5 2,5 LUX 0m

22m

ALIADOS GRATE DESIGN SIZA VIEIRA | SOUTO MOURA SATURNO GRATE DESIGN ALCINO SOUTINHO QUADRIS GRATE DESIGN PEDRO MARTINS PEREIRA ALTA GRATE DESIGN NPK CRIVA GRATE DESIGN NPK GG GRATE DESIGN JORGE TRINDADE | LARUS GP GRATE DESIGN JORGE TRINDADE | LARUS Grates for tree ditches made of Euronorm cast iron 1561:1997, metallized and painted.

Acessories www.larus.pt | +351 234 520 600

esc.: 1/40

esc.: 1/10

18 18 4

ALIADOS 2000 GRATE DESIGN SIZA VIEIRA | SOUTO MOURA

Ø950 Ø2000

18 18 4

ALIADOS 1200 GRATE DESIGN SIZA VIEIRA | SOUTO MOURA

Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in Epoxy coating in dark grey (LR RA7). Rim: S275JR (LR A1) steel stripped, metallized and painted. Fixing: Screwed to a rim previously fixed to the ground by lead solder (LR F4).

Ø500 Ø1200

Ground level grate

10 35

SATURNO GRATE DESIGN ALCINO SOUTINHO

Ø940 5 B

Ø610 Ø970

Raised grate 10 35 Ø940 5

Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in Epoxy coating in dark grey (LR RA7). Fixing: Screwed to a rim previously fixed to the ground by lead solder (LR F4).

AB 50

QUADRIS GRATE DESIGN PEDRO MARTINS PEREIRA

1200

400 1200

Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in Epoxy coating in dark grey (LR RA7). Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection. Fixing: Screwed to a rim previously fixed to the ground by lead solder (LR F4).

esc.: 1/40

esc.: 1/10

GG2 1500 X 1500 GRATE DESIGN LARUS | JORGE TRINDADE

1500

Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in Epoxy coating in dark grey (LR RA7). Fixing: Screwed to a rim previously fixed to the ground by lead solder (LR F4).

690 1500

GG1 1200 X 1200 GRATE DESIGN LARUS | JORGE TRINDADE

1200 A

450 1200

GG 1200 X 1000 GRATE DESIGN LARUS | JORGE TRINDADE

1000 A

450 1200

GP GRATE DESIGN LARUS | JORGE TRINDADE

660 A

500 1240

Acessories www.larus.pt | +351 234 520 600

esc.: 1/40

esc.: 1/10

ALTA Q GRATE DESIGN NPK

Ø600 A

1480

AB 66

ALTA C GRATE DESIGN NPK

Ø600 Ø1480 A B

CRIVA Q GRATE DESIGN NPK

Ø600

1480

CRIVA C GRATE DESIGN NPK

Ø600 Ø1480

A B

Fradinhos design Daciano da Costa Spindle shaped bollards, with circular section, a consequence of the traditional limestone bollards historically called Fradinhos. Metal tubes may be used to unite the bollards so they may be used as guard rails.

Acessories www.larus.pt | +351 234 520 600

c threaded tube

Fradinho FR3

Fradinho FR4

680

250 LT

360

Fradinho FR3 Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1). Fixing: element fixed to the ground with lead solder (LR F3). Fradinho FR4 Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1). Fixing: element fixed to the ground with lead solder (LR F3). Foundations to be carried out by the client according to technical information made available.

Bollards design Larus Bollards used for various purposes.

Acessories www.larus.pt | +351 234 520 600

Fixed bollard

Rebuttable bollard

Removable bollard

Retractable bollard

Lighted bollard

900 1200

1200 900 500

P5 1200 650

125

Burb bollards design Carlos Pereira Flexible urban barrier for the protection of pedestrian spaces. When hit by a car, flexes and absorbs the impact. Does not damage the sidewalk, the object or the vehicle. Cushions possible impacts sustained by pedestrians.

Acessories www.larus.pt | +351 234 520 600

640

150

VesĂşvio bollard design Alcino Soutinho The VesĂşvio bollards are intended to solve the problem of illicit invasion of public sidewalks by vehicles, without inflicting an overly excessive formal or physical aspect, the sloped surface facing the pedestrian and the more aggressive edge facing the road.

Acessories www.larus.pt | +351 234 520 600

Vesúvio 17

Vesúvio 25

245

166

338

262

347

340

Mounting System

Vesúvio 17 Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in Epoxy coating in dark grey (LR RA7). Fixing: element fixed to the ground with lead solder (LR F3). Vesúvio 25 Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in Epoxy coating in dark grey (LR RA7). Fixing: element fixed to the ground with lead solder (LR F3). Foundations to be carried out by the client according to technical information made available.

Dog waste bins design Jorge Trindade Containers for disposing of dog waste. The round tube is not aggressive or hazardous to the public in general and colours may be customized. The movable top edge, holds the disposable bags and when lifted, allows access to the liner on the bottom of the container. When opening of the latch, the lid will fold thus allowing for maintenance.

Acessories www.larus.pt | +351 234 520 600

Ă&#x2DC;125

220

Telescopic opening

Bag removal

1070

Cross section of lid

Roll of plastic bags

Closed container

open container

Dog waste bins Body: round S275JR (LR A1) steel tube, stripped, metallized and painted. Standard version in Aral Cin (LR RA7). Movable top: round S275JR (LR A1) steel tube, stripped, metallized and painted. Standard version in RAL 6018 (LR RA2). Incorporates disposable bags. When lifted, allows for access to the line on the bottom of the body of the bin. It is also from here that, upon opening of the latch, the lid folds, allowing maintenance. Guides, handle and inner ring: AISI 304 (LR AX1) stainless steel. Fixing: threaded rods of AISI 304 (LR AX1) stainless steel bolted to the ground using chemical bushing (LR F1). Foundations to be carried out by the client according to technical information made available.

Continuous | Triangular parking design Pedro Pereira | Francisco ProvidĂŞncia In the continuous model, each module corresponds to a six meter hot-pressed bar. In the triangular model, the bikes are held by their frame.

Acessories www.larus.pt | +351 234 520 600

Continuous parking 645

780

2 module

1140

1500

3 modules

4 modules

570

Triangular module 870

417

1 module

740

2 modules

1060

3 modules

Continuous Parking Body: S275JR (LR A1) steel bar, hot-pressed, stripped, metallized and painted. Standard version in forge enamel (LR EF1). Lock mechanism: S275JR (LR A1) steel bar, stripped, metallized and painted and S275JR (LR A1) steel pipe, stripped, metallized and painted. Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1). As an alternative, segmented bushings may be used. Triangular Parking Body: S275JR (LR A1) steel bar, hot-pressed, stripped, metallized and painted. Standard version in forge enamel (LR EF1). Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the pavement/ground with lead solder with chemical bushing (LR F1). As an alternative, segmented bushings may be used. Foundations to be carried out by the client according to technical information made available.

1385

4 modules

Shade structures design Pedro Martins Pereira | Larus By using the Prumo Larus concept, it is possible to hide the fixings, thus enabling a much purer finish. The matte anodized finish helps soften any acts of vandalism. Available in a lacquered finishing. The gussets that tighten the shade screens, are fixed to the plumb-bob by pipes which allow for height adjustment as well as compensating where the ground is uneven.

Acessories www.larus.pt | +351 234 520 600

A-A

A A

3500

3720

The plan dimensions may be changed.

3720

Shade Structure Plumb bob: Anodized aluminium in C177006 (LR AL1), C177.007 (LR AL2), C177.009 (LR AL3) profile or painted. The metallized and painted S275JR (LR A1) steel gussets tighten the perforated shade screens which, upon attachment to the plumb bob by S275JR (LR A1) steel tubes, allow for regulation of height, compensating for any unevenness in the ground. Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1). Foundations to be carried out by the client according to technical information made available.

Shade pergola design Pedro Martins Pereira | Larus An adjustable solution, capable of adapting to different sceneries without becoming too overwhelming.

Acessories www.larus.pt | +351 234 520 600

5000

2900

Other dimensions 5000

3000

4000

3000

8000 3000

3000

Shade Pergola Structure: Adjustable square plumb bob made of S275JR (LR A1) steel, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection. Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1). Fundações a executar pelo cliente segundo informação técnica a disponibilizar.

Mondrian Kiosks design Larus The harmony of contrasts is present in the work of Mondrian, who said: â&#x20AC;&#x153;Squares! But I never drew squaresâ&#x20AC;?.

Kiosks www.larus.pt | +351 234 520 600

2600 366

1210 2720

924

Structure: Panels with high-density compounds soaked in thermo-hardened HPL 3000x1350x14mm (LR RF1) phenolic resins, structured with vertical gussets and horizontal outlines of S275JR (LR A1) steel, metallized and painted. Cover: polyester resins reinforced with fibreglass. Base: metal structure in S275JR (LR A1) steel, metallized and painted. Floor: JomarDeck (LR CJ1) plywood coated with a phenolic film and slip resistant finishing. May be adapted to different uses.

Arqui Kiosks design Jorge Trindade | Larus Modular and easy to integrate into both historical or contemporary places, this configuration is adaptable to diverse locations.

Kiosks www.larus.pt | +351 234 520 600

Kiosks Arqui 3x2

Examples of other dimensions

12840

8000

3500

5000

11000 2060 3060

3060

5000

2950 7890

9000

2960

9000 6000

Phenolic resin 756 6000

5500

5000

Structure: S275JR (LR A1) steel tube stripped, metallized and painted. Standard version in RAL 7011 (LR R2). Cover: polyester resin reinforced with fibreglass, with rainwater management system of piping inside the supports. Exterior coating: HPL or MEG Wood finish SEI-A 756 (LR RF1) phenolic resins. Interior coating: 30mm sandwich plate, smooth on one side and textured on the other. Drop ceiling: metal structure in S275JR (LR A1) steel with metallized sandwich plate sheets. Ventilation grids: thermo-lacquered aluminum. Possibility of including tempered glass panels, access doors, service windows, opening panels, WCs and other types of finishing.

2970

2500

2970

Jardim kiosks design Larus Traditional and romantic, easy to integrate into large natural spaces, plazas, parks or public gardens.

Kiosks www.larus.pt | +351 234 520 600

Other dimensions

Jardim 6

Jardim 9

3500 17 33

2500

Jardim 11

3742

Jardim 13

Jardim 17

3575

5310

Jardim Kiosk 4

3880 3300 2400 3750

930 2160

Jardim 25

Jardim 4.5x2.5

3560

Jardim 6x3

3560 5200 7750

4500 2500

2680

Structure: thermo-lacquered aluminium. Cover: polyester resin reinforced with fibreglass, with with external gutter for rainwater management. Panels: polyester resin reinforced with fibreglass. Protection via opaque panels that open; panels in electro-sold and metallized wire netting or aluminium blinds may also be used. May be adapted to any purpose. The numerical designation corresponds to the inner area.

2160

Beach support design Alcino Soutinho Modular construction, easily and quickly dismantled, in places often pounded by the sea during Winter. Allows for complete rainwater drainage.

Kiosks www.larus.pt | +351 234 520 600

2613

370

3830

Modular construction: marine plywood coated on both sides with polyester resin reinforced with fibreglass. Connecting parts: AISI 304 (LR AX1) stainless steel. The basic version has modules for customer care; kitchen, first aid facility, storage and WC (Male, Female and / Handicapped). Multiple modules may be joined together. Solution for rainwater drainage through the joining rails of the module. Intended for placement at locations often pounded by the sea during Winter, hence its easy-todismantle nature.

2300

Lifeguard towers design ESAD Hardware for beachwatch support. This hardware draws visible reference from the wooden decking slats and solar protection awnings of boats. Modular construction, easy to dismantle, using corrosion-resistant materials.

Kiosks www.larus.pt | +351 234 520 600

2860

700

11000

Modular construction: easy to dismantle with a metal structure in S275JR (LR A1) steel, stripped, metallized and painted. Standard version in forge enamel (LR EF1). Tube section profile: AISI 316 (LR AX2) stainless steel enhancing resistance to corrosion. Treatment for plating based on epoxide resins hardened with polyamide resins and pigmented with zinc dust. Painting: Anticorrosive enamel. Interior paving: Anti-slip maritime plywood. Outdoor paving: 100% recyclable composite deck. Walls, ceilings and doors: OSB plates reinforced with layers of polyester resin reinforced with fibreglass. Metal hardware and locks: AISI 316 (LR AX2) stainless steel. Fixed windows: steel profiles in grey lacquer with tempered glass. Shade structure: micro-perforated screen and AISI 316 (LR AX2) stainless steel frame. Mast for placing of banner: AISI 316 (LR AX2) stainless steel. Electrical installation: solar panel providing energy independence to the watchtower. Side wings: slats of Kambala wood, lacquered in the colour RAL 9003 (LR RA3). Protection: Rope. Fixing: Wooden beam foundation previously fixed to the structure (LR F5).

OTHER KIOSKS OUTDOOR TERRACE BARS

design Larus | MĂĄrio Vaz | Mattos David | Jorge Trindade | JoĂŁo Matos Kiosks are the solution for many small business investors. They are sales points that have reduced installation costs. Terrace bars allow us to enjoy the urban environment while providing protection from weather conditions This type of hardware, often with a privileged location, gives life to open spaces, meeting the demands of integration into historic, rural or contemporary areas. We have resorted to the use of resistant materials so as to avoid maintenance costs or the degradation of hardware.

Kiosks www.larus.pt | +351 234 520 600

TERRACE BARS

SIMPLES 4,49m² GRANDE 7,56m²

LISBOA 2,43m²

PARQUE 5,47m²

UNIVERSAL 2,83m²

OCTUS 3,8m²

TUBOS 4,84m²

SANDWISH BAR OCTUS 3,35m²

VERSÁTIL 2,96m²

PIRÂMIDE 3,84m²

BANCA ARDINA 3,7m²

AVEIRO 2,83m²

BANCA ENGRAXADORES 2,12m²

BOTAS 2,31m²

TATAMI

VISUAL 16m²

PÉRGOLA

Kiosks www.larus.pt | +351 234 520 600

Kiosque URBUS 5m²

EXPO 12m²

CUBOS FORTE 4,84m²

ARQUI 5m²

Beach Terrace Bar | Vila do Conde design Paula Jo達o

Urban Terrace Bar | Guarda design Carreira

The project, intended to respect the surrounding area of the old XVII century military defence building, was built using copper sheet for the cover and on some of the facades. Slate in the interior paving; sliding doors.

Design concept that contrasts with the historic architecture and romantic garden surroundings, hence also the external cladding in alucobond.

Kiosks www.larus.pt | +351 234 520 600

Terrace Bar | Entre-os-Rios design Paula JoĂŁo

Terrace Bar | Castelo Branco design Josep LluĂs Mateo

Terrace Bar | Almada design Larus

Containerized cafeteria / bar serving as support to the river-tour pier of Entre-os-Rios.

Resulting from the transformation and modernization of a degraded historic centre. An ambitious project was undertaken for the pedestrianization and removal of road traffic. The redesigning of the park led to it being occupied by several public facilities, allowing for new commercial and recreational uses, respecting the older building structures and introducing an impressive new structure, large in size but nevertheless gracious, thus conferring a modern look to the older styles.

On the coastal slope of Almada, facing the city of Lisbon, a terrace bar was built, allowing for the enjoyment of the Tagus river and the capital city views. Using copper sheets around the ledges.

Larus pole design Pedro Martins Pereira | Larus Structural Post, with a discreet presence, which allows fixings to be hidden when being used as a Signpost. The matte anodized finish helps soften any acts of vandalism. Available in a lacquered finishing.

Signage www.larus.pt | +351 234 520 600

Fitting system Ă&#x2DC;107

Post top end

Post base

Post: Anodized aluminium structure in C177006 (LR AL1), C177.007 (LR AL2), C177.009 (LR AL3) profile or painted. With a discreet presence which allows fixings to be hidden when being used as a Signpost. The matte anodized finish helps soften any acts of vandalism. Available in a lacquered finishing. Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1). Signposts: In lacquered aluminium, 4mm thick, or in expanded PVC, 10mm thick. Foundations to be carried out by the client according to technical information made available.

Quadris | rondo line design Larus Signage systems with a simple, economical and easy maintenance conception. Use of round tubes in the Rondo Line and square tubes in the Quadris Line.

Signage www.larus.pt | +351 234 520 600

Rondo line

Quadris line

Standard pole

height: 3m

Standard pole

height: 3m

Standard plate

Ă&#x2DC;80mm | 3mm thickness 665x200mm

Standard plate

80mmx80mm | 3mm thickness 600x200mm

Stainless steel M8 screws, with a Torx semi-spherical head, with a special key

Rondo Line Post: on circular bob of S275JR (LR A1) stripped, metallized and painted steel. Standard version in forge enamel (LR EF1). Signposts: in S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in RAL 9010 (LR AR4). Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1). Quadris Line Post: on square bob of S275JR (LR A1) stripped, metallized and painted steel. Standard version in forge enamel (LR EF1). Signposts: in S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in RAL 9010 (LR AR4). Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1). Foundations to be carried out by the client according to technical information made available.

Stainless steel M8 screws Tube, base and plates in metallized and painted steel

Outdoor Check-Up Tracks Iberian artistry, Dr. António Lúcio Baptista design Larus, Marta Afonso Based on the concept of “Self-Assessment”, “Check Up Tracks” were designed to be mainly developed in municipal structures already in place, with pedestrian footpaths that serve the local population. In the designated areas 12 billboards are placed along a training circuit already indicated through complementary directional signposts. Along the way, the park users are encouraged to perform a series of physical tests which will help alert them or make them aware of various health related issues. All of the readings are then recorded onto a sheet of copy paper which is delivered to the users and which they may use as reference in the future. A copy of this sheet may also be left at the park enabling the undertaking of studies and statistics regarding the general health of the local population. Before starting their pedestrian circuit, users are referred to the “Check up Centre”, an indoor area, where they may find a series of medical equipment and informational boards. After undertaking the various assessments available there, they should go outdoors again so they may start the circuit.

Signage www.larus.pt | +351 234 520 600

board

directional signboard

distance marking

indoor signboard 300

420

1000

200

1800

200 500 300

600

CHECK-UP CENTRE At the “Check Up Centre”, users may find several useful and relevant boards. Hydration Level (evaluates the colour of urine by comparison); Body weight (educational tips for stimulating exercise); Self-examination of breasts and abdominal perimeter. In addition to these information signboards, the centre also offers the following equipment:

SCALES + HEIGHT GAUGE Measuring of Body Weight and Measuring of Height

SUGAR LEVEL METER

SPHYGMOMANOMETER Measuring of Blood Pressure

TAPE MEASURE Measurement of Abdominal Circumference

OXIMETER Measuring the concentration of oxygen in the blood

PODOSCOPE Foot assessment tool

UROFLOWMETRY Detection of Prostate related problems

PEDOMETER Step counter

ROTATIONAL VIBRATING PLATFORM

HEART REAT MONITOR

DEFRIBILLATOR Basic life support

FIRST AID KIT

extra equipment

Board Structure: post in 2mm thick circular S275JR (LR A1) steel tube, metallized and painted. Standard version in RAL 7011 (LR RA5) Bent metal plates of 3mm thick S275JR (LR A1) steel stripped, metallized and painted, welded together and to the tube. Standard version in RAL 7011 (LR RA5). Signboards: In HPL or MEG Wood finish SEI - A (LR RF1) phenolic resin with low relief sculpting and vinyl application. Application of the phenolic resin plates directly on the sheet. Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1). Directional signboard Signposts: in S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in RAL 7011 (LR RA5). Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).

Indoor signboard Boards: in bent metal plate of OL.838059.1 (LR AP1) anodized aluminium. Digital printing on self-adhesive vinyl applied directly to the signboard. Fixings: through threaded pins (LR F6). Distance Marking Part: brushed AISI 316 (LR AX2) stainless steel sheet. Footprint placed at every 100 meters marking the level of distance undergone and serving as feedback to the doctor in case of any circulatory or articulation problems. Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the pavement/ground with lead solder with chemical bushing (LR F1). Foundations to be carried out by the client according to technical information made available.

Mupi design Pedro Martins Pereira | Larus Mupi information panel in console or totem style display cases, for standard sized posters, with illumination on one or both sides.

Signage www.larus.pt | +351 234 520 600

Panel mupi

Totem Mupi

1400

190 1400

1170

1710

1940

2700

2570

610

540 160

160

Mupi Console Panel Structure: S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Lighting: T5/G5/28W (lower consumption). Electronic ballasts (non strobe effect). Fuse isolation (for greater protection). Hydraulic shock absorbers (doors). Glass: 6 mm tempered. 5 mm opal acrylic plate for displaying of posters. Opening doors: with hinges on the top end. Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1). Mupi Totem Panel Structure: S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Lighting: T5/G5/28W (lower consumption). Electronic ballasts (non strobe effect). Fuse isolation (for greater protection). Hydraulic shock absorbers (doors). Glass: 6 mm tempered. 5 mm opal acrylic plate for displaying of posters. Opening doors: with hinges on the top end. Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2). Foundations to be carried out by the client according to technical information made available.

Arqui shelter design Jorge Trindade | Larus Shelter with a very discreet design, easy to integrate into urban, rural, historical or contemporary spaces.

Shelters www.larus.pt | +351 234 520 600

Shelter without lateral

Shelter with Mupi

Shelter with lateral

3100

3300

3100

2500

Open-sided shelter Structure: S275JR (LR A1) steel plate and tube profile, stripped, metallized and painted. Standard version in forge enamel (LR EF1) 8 mm tempered glass. Bench: structure in S275JR (LR A1) steel plate stripped, metallized and painted. Standard version in forge enamel (LR EF1). Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection. Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2). Shelter with sides Structure: S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1). Tempered glass. Sides: 6 mm wired glass. Bench: structure in S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1). Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection. Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

1437

2700

Shelter with Mupi Structure: S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) 8 mm tempered glass. Mupi: structure in S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1). 8 mm tempered glass. Bench: structure in S275JR (LR A1) steel plate stripped, metallized and painted. Standard version in forge enamel (LR EF1). Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection. Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2). Foundations to be carried out by the client according to technical information made available.

Daciano da Costa shelter design Daciano da Costa Porch structure. Different positioning possibilities in accordance with the width of the pavement.

Shelters www.larus.pt | +351 234 520 600

AB2 shelter

2390

1300

450

1100

3980

AB1 shelter

2390

1900

450

1680

AB1 Shelter Structure: S275JR (LR A1) steel plate and tube profile, stripped, metallized and painted. 8 mm tempered glass. Cover: polyester resins reinforced with fibreglass. Suspended ceiling: maritime plywood. Cover: with rail grid for collecting rainwater, which is drained through the support beams. Bench: structure in S275JR (LR A1) steel plate stripped, metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection. Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1). AB2 Shelter Structure: S275JR (LR A1) steel plate and tube profile, stripped, metallized and painted. Tempered glass. Suspended ceiling: maritime plywood. Cover: with rail grid for collecting rainwater, which is drained through the support beams. Bench: structure in S275JR (LR A1) steel plate stripped, metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection. Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the pavement/ground with lead solder with chemical bushing (LR F1). Foundations to be carried out by the client according to technical information made available.

P贸rtico shelter design Jorge Alves The porch is the linking element between two diagonal plumb bobs, allowing for them to join together side by side, without disturbing the casual look of this design.

Shelters www.larus.pt | +351 234 520 600

127

3150

1400

127

Pantone 1355C

2600

Pantone 226C

Pantone 363C 3000 Ă&#x2DC;127

1400

Side by side shelters

Structure: Round, S275JR (LR A1) steel tube and bent metal plate, both stripped, metallized and painted. Standard version in forge enamel (LR EF1) Tempered glass. Cover: painted fibreglass Bench: perforated S275JR (LR A1) steel sheet, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the pavement/ground with lead solder with chemical bushing (LR F1). Foundations to be carried out by the client according to technical information made available.

Pantone 321C

technical information steel/stainless steel, cast iron, metallization, galvanization, woods, finishing paint, rotomolding, electricity

www.larus.pt | +351 234 520 600

STEEL / STAINLESS STEEL

Steel is an alloy combining iron and carbon, with a maximum carbon content of approx. 2.1%. The non-alloy steel with low carbon content (<0.3%), has a high ductility and good characteristics for the mechanical work and welding, being the structural steel used by Larus (EN10025). Steels with a high content of alloying elements, such as stainless steel, contain at least 11% of chromium, ensuring a high resistance against corrosion, forming a thin adhesive film, which protects the material from corrosive attacks in contact with water or moist air. With the appropriate additions of chromium, nickel and molybdenum, it is possible to obtain alloys particularly suited to be used in saline or acidic environments (AISI 316), being the stainless steel adopted by Larus.

CAST IRON

Cast iron is a ferrous alloy with a carbon content higher than 2%. The lamellar gray cast iron (because it has a grey fracture surface, due to the presence of graphite in the form of flakes) solidifies in a stable way, as a result of a chemical composition within certain parameters, such as high levels of carbon and silicon and of slow cooling laws. This alloy has a high capacity for vibration damping, high aptitude for machining, facilitated by the graphite flakes which have a lubricating function, good corrosion resistance in many common environments (greater than carbon and steel) and a reduced contraction of metal associated with good fluidity that facilitates the casting of complex parts produced by Larus. lamellar

METALLIZATION

Protection of a surface, that consists on the projection of zinc or of a zinc / aluminum alloy (85% Zn – 15% Al), melting and projecting the metal wires with a gas (O2 propane or O2 acetylene) or electric pistol. To be durable, allowing the proper adhesion of the metallization, a careful preparation of the surface of the metal piece is required, to achieve the degreasing, the deoxidation and the necessary roughness of the metal. An abrasive jet of shot blasting SA 2.5 - 3 SA is used (dry compressed air projection – dry and oil-less – or through turbines) The thickness of the zinc layer comes from the mechanical deposit of zinc particles in the roughness of the support, obtained by successive passages until a minimum thickness of 30-40 microns is reached.

nodular

ACETYLENE PROPANE OXIGEN

Nodular or spheroidal cast iron is obtained by the liquid bath treatment, with the introduction of a small addition of alloying elements (inoculants). The graphite precipitates, not in the form of flakes, but in the form of nodules or spheres, improving substantially its mechanical properties, which approaches it to steel in ductility and tensile strength, being used by Larus particular situations.

ZINC WIRE AIR COMPRESSED

Zn SIS 055900 Norm

AFNOR Norms A91701 / NBN755 / iso 2063

Painting on metallization The roughness of the surface favors the perfect adhesion of subsequent paintings: - A first layer using very diluted ink (+ or 30%), applied a maximum of 40 hours after metallization; - Following layers, finishing or intermediate, can be applied immediately after. Advantagens: - Long lasting protection against corrosion, with an excellent abrasion resistance, which limits the frequency and cost of the maintenance and the assembly of metallic structures, by adjusting the thickness of the coating, depending on the aggressiveness of the environment. - It is an ideal surface for subsequent application of painting (first layer and finishing). - No change of the mechanical properties. Disadvantages: - The interior areas of pieces are not protected.

www.larus.pt | +351 234 520 600

GALVANIZATION

Protection of the surface, obtained by the immersion in a bath of liquid zinc (min 98% of pure zinc) at about 450 째C. The parts are immersed long enough to reach the bath temperature and then are slowly withdrawn.

WOODS

Wood is one of the most important building materials and requires an energy comsumption for its production (5 to 7.5 KWH / Ton) much lower than other materials (concrete 25 to 300; glass 6000, plastic 8200 to 20.000, aluminum 72.000). It is also the only renewable building material and neutral regarding the CO2 emission. In several conditions it is essential to use protective measures:

The zinc metallurgically reacts with the metal surface of the piece, forming a zinc/iron alloy whose chemical composition varies from 25% Zn - 75% Fe at the base, up to 100% Zn at the surface. The thickness of the zinc layer obtained is at least 60 microns.

- In contact with ground water, or soaked, the wood may be attacked by fungi; - In environments of low oxygen content, the wood may be attacked by bacteria; - Used outdoors, it is susceptible of having cracks caused by the absorption of water; - Subject to the action of UV rays, lignin, a component of the wood, rots. Thus, for each use it is necessary to apply the woods with the most recommended features, as well as to employ preserving treatments.

Cells

Green wood (over 30% of water)

Wood at the point of saturation of fiber (about 30% of water)

Absolutely dry wood

A living tree has a water content of above 40%. After slaughter, the water content decreases. At first, the free water evaporates, until reaching the saturation point of the fibers. Here, the remaining water is retained in the cell walls and its content is around 30%, depending on the temperature. If the wood dries below the saturation point of the fiber, it shrinks, but it swells again if it is moistened. Contraction by drying

Structure of the wood Soft wood

Hard wood

axi

al c

tangential (100% Zn) (94% Zn 6% Fe) (94% Zn 10% Fe) (75% Zn 25% Fe) Metal base

The preparation of the surface of the metal piece is of paramount importance. It is applied the same method used to prepare surfaces for metallization. Painting on galvanization The surface is phosphatized after a slight abrasive blasting. The Phosphatizing creates a crystalline surface of phosphates with an appropriate roughness to maximize the adhesion between the ink and the zinc layer. Advantagens: - As galvanization involves the total immersion of the piece, all the surfaces are coated. Even the inside of tubes or hollow parts. - The thickness of the coating is fairly uniform, ensuring protection in critical areas such as edges and corners. Disadvantages: - The surface may present runoff of the zinc bath.

radial

tan

nti

ial

d ra

tan

nti

dia

The lighter and softer species have simpler construction than the harder and denser species. The shape, the constitution and size of the cells of the tree determine the nature and the properties of the wood. The cells of the inner layers are no longer alive and are usually darker, due to the formation of resin and oxides that provide natural protection. These cells are closed to fluid transport. Usually this is the most durable and less subject to water penetration area. Thus, the protective measures are specifically targeted to the outer layers.

The contraction of the wood is very different depending on the direction: - The tangential contraction is about twice the radial contraction; - The axial (length of the torus) contraction is very low, not relevant. Dense woods have a greater contraction than the light ones. The wood should be dried out before use (until the characteristic content moisture of the application area).

FINISHING - PAINT

Cracks and warping

Protective varnish

When hitting one side of the timber, the sun and wind remove the surface water. The water in the interior will come to the surface at a speed slower than its removal from the surface. The peripheral layers (more dry) shrink more than the inner layers (more humid), creating internal tensions that are relieved with the opening of cracks that soften when the external humidity increases.

The action of the U.V. rays causes the degradation of lignin, favoring its decay to a thickness that varies between 1mm and 2mm. For a better protection, the varnish used by Larus has iron oxides and other components that, working as lamellae parallel to timber surface, promote the reflection of the U.V. rays. The greater the number of varnish applications is, the greater the UV protection would be. However, it darkens the color of the wood.

Liquid paint - Enamel Forge On the primary is applied metal enamel with high anticorrosive power and weather resistance. It gives the appearance of wrought iron, with a color formulated for Larus. Liquid Paint â&#x20AC;&#x201C; Epoxy If we need higher durability, hardness and resistance while maintaining the look of wrought iron, we apply multifunctional epoxy iron oxide paint.

The wooden slats found in furniture are protected by non-toxic varnish (aqueous solvent) that is particularly suitable for the use of children.

In the case of a board, the warping is caused by the contraction of the layers under the sun and wind effect, in opposition to the opposite side, that doesnÂ´t contract in the same way and is unable to completely counteract this effort. Therefore the use of wide boards should be avoided.

The initial protection, carried out in the factory, includes the application by immersion of a wood filler that, in addition to improve the U.V. protection, promotes the adhesion of resin to wood, followed by a minimum of two varnish coats without sanding between coats. Maintenance of Wooden Slats The wooden slats require maintenance that depends on the environment where the equipment is installed: Liquid Paint - Synthetic Enamel - Sanding the wooden slats individually, preferably after cleaning the layer that contains decomposed lignin (if this has already occurred). The wooden slats must be sanded to remove any remaining varnish and prepare them for the varnish, which will provide the necessary protection. - Apply at least two coats of non-toxic varnish (which may be provided by Larus), without sanding between coats.

The wood cracks the most the lower its density is, because there are more empty spaces between the cells occupied by air. The wood most used by Larus in its furniture lines is Tali. This is an exotic wood from Central Africa which, therefore, is not subject to the action of European agents such as worms, fungi, wood decay, etc. Due to its high density (900 kg/m3), it is very resistant to water penetration and thus to the consequences that affect more severely the less dense woods.

The regularity of maintenance depends on the environment in which the wooden slats are installed. In a place with natural environmental aggressiveness, it is recommended that the maintenance is performed within two-year intervals, when the wooden slats begin to show some wear. This time period should be reduced with the increasing aggressiveness of the environment. With a greater number of varnish coats, we enlarge the time period between maintenance.

www.larus.pt | +351 234 520 600

It is an alkyd, solvent, bright, used for the painting of steel structures. It has good gloss retention. Liquid paint - Polyurethane Enamel With high brightness, is used in the painting of metal structures. It has high gloss retention and risk resistance. It has an excellent adhesion to iron and wood. It reveals high resistance in corrosive environments. Dry Paint - Electrostatic powder coating Without solvents, this paint is used in dry powder. The powder receives a positive electric charge making it electrostatically attracted by the piece. It is cured under heat at 200 Â° C. During this process the powder melts into a uniform film which, that after cooling, results in a uniform coating with excellent finishing. This process presents excellent adhesion characteristics, abrasion resistance and chemical resistance. It is an environmentally friendly process because it contains no solvents, non-emitting volatile organic compounds (VOCs) into the atmosphere.

ROTOMOLDING

ELECTRICITY

Kiosks and Terraces Protection of People The protection against electric shock and direct and indirect contact must be ensured, guaranteeing the extinction of defects within the established maximum times (according to the Technical Rules of Low Voltage Electrical Installations). In the use of TT system (neutral earthed and earthed mass), protection against electric shock requires the implementation of security measures. A Rotomoldagem é um processo de transformação de matérias plásticas denominadas de termoplásticos (polímeros que se tornam líquidos acima de uma dada temperatura) que incluem o polietileno, polipropileno ou o PVC. A Rotomoldagem é um processo térmico em que a matéria termoplástica é colocada sob a forma de pó no interior de um molde metálico que é sujeito a uma rotação biaxial a uma temperatura que pode chegar até aos 300 ºC. A temperatura permite a fusão da matéria plástica enquanto a rotação biaxial permite a distribuição do material polimérico por toda a superfície do molde. Após um período de tempo pré-estabelecido o aquecimento do molde é interrompido iniciando-se um período de arrefecimento de forma a solidificar a matéria plástica moldada e a possibilitar a retirada da mesma de forma segura para o operador. O arrefecimento é, normalmente, obtido por recurso a ar forçado pela utilização de ventiladores sendo que a rotação biaxial é mantida durante a fase de arrefecimento. RAL colors available All RAL references below are made by approximation, so slight variations may occur. Other colors may be delivered on request.

RAL 5003 RAL 5017 RAL 6029 RAL 6024 RAL 1021 RAL 1016 RAL 3000 RAL 7013 RAL 9001 RAL 9004

In the case of direct contacts, is used the isolation of the active parts or equipments with enclosure IP code equal or superior than IP2X (when it isn’t possible to isolate the active parts). In addition, high sensitivity differential devices are installed (I n<30mA). In the case of indirect contacts, differential devices are used with sensitivity according to the circuit to be protected conditions (humidity, type of users). Since there are several metal masses accessible simultaneously (kitchens) it is assured the equalization of mass powers. Facility Security Due to its serious consequences, in the design of electrical installations the protection against overloads and short circuits is assured. Thermal-Magnetic Breakers are installed (automatic cutting devices) at the origin of the circuits, ensuring the protection against these two phenomena and that the circuits do not work for long periods in over load conditions (avoiding overheating) and that short circuits are eliminated before the thermal fatigue time of conductors (avoiding damage to the insulation and changes in the properties of conductor). Interior Lighting The facilities are designed according to the characteristics of space, ensuring high levels of energy efficiency and visual comfort. The compact fluorescent lamps with integrated electronic ballast (energy saving lamps), used in kiosks and terraces, ensure an efficient interior lighting. CFLs advantages: - Low energy consumption - Good color rendering index (CRI> 85) - High average length of life (6000h) - Several color temperatures available (2700K to 6500K, from warm white to cool white) - Elimination of flicker effect (causing eye strain)

Public Lighting The main objective is to ensure the safety of users of outdoor public spaces (gardens, footpaths, urban roads, high ways) by the implementation of lighting systems that provide light levels suitable for the space to be illuminated (EN 13 201). The lighting poles produced by Larus combine an attractive design with good quality of light. The light quality varies depending on the lighting source used, being constrained by the color temperature and by the color rendering index (CRI) provided. In order to obtain a high quality of light, Larus uses metal iodide lamps and, more recently, LED light fixtures (light emitting diode). Characteristics of metal iodide lamps: - Good color rendering index (CRI> 80) - Color Temperature (2800K, warm white) - Average length of life (6000h) Characteristics of LED light fixtures: - Good color rendering index (CRI> 75) - Color Temperature (5300K, cool white) - Average length of life (60000h, the highest among all sources of light) - Low energy consumption Autonomous lighting columns (not connected to the mains electricity system): The development of LED and Photovoltaic technology, enables the design of autonomous lighting poles, as is the case of Larus Solar Pole. Such lighting poles produce electricity during the day through an integrated photovoltaic generator, which is stored in a battery bank and used later in the night period to feed the lamp. This way, it is possible to remove the energy consumption from the mains and to significantly reduce the manpower, cost and assembly time of the lighting poles, since it is not necessary to install electrical feeding circuits, making the opening of ditches unnecessary.