Alegra Feeder 6600
All feeder anglers have experienced this situation: There is a strong bite by a carp or barbel: the line is stuck in the line clip in order to limit the cast so that the drag is blocked and the leader torn. This can’t happen anymore thanks to the revolutionary release clips! The present winner of the German Feeder Meeting 2017, Michael Zammataro and Julian Feuerlein, have developed a line clip which releases the line when stronger fish bite so that the drag is released immediately after the bite. Losing bigger fish when the line clip is used to limit casts is therefore a thing of the past! 10 release clips are included in scope of supply which can be changed accordingly by hand. A short manual is also included. The special anti-tangle guide underneath the spool prevents the line from getting tangled in the rotor. Also equipped with the rubber-buffered and spring-loaded Safety Line Clip.
d by ec te Prot patent ty u t i li
• 5 precision ball bearings plus 1 needle bearing • Release clip protected by utility patent • Release clip, especially rubber buffered - protected by utility patent • 10 additional Release Clips included • Rubber-buffered and spring-loaded Safety Line Clip • Line protector • S stroke system for optimal line lay for casting • Bail Fix System: no unwanted turn back of the bail when casting • Total Tolerance Control System (T.T.C.): any conceivable tolerances of the crank, gear and drags are reduced to a minimum • Strong Bail Concept: the bail is made from extra-strong, lightweight aluminium • Quick-Stop-System (Q.S.S.) to stop the rotor instantaneously • Anti Swing-System (A.S.S.), prevents undesirable vibrations • Finely adjustable drag (S.D.S) with large brake discs • Anti-Twist line roller • Aluminium spool • Aluminium crank • Optional left or right manual operation Line clip which releases the line when stronger fish bite so that the drag is released immediately after the bite. Tip: Fix the line as usual in the clip, then wind in 1 turn and set the brake to low braking force.
Also equipped with the rubberbuffered and spring-loaded Safety Line Clip.
Line Protector System
Aluminium spare spool
Alegra Feeder 6600 ItemNo.
OrderNo.
Line capacity m Ø mm
weight g
gear ratio
103230
/660
340 0.10 / 230 0.25
410
4.4 : 1
16
Michael Zammataro
ItemNo.
OrderNo.
Line capacity m Ø mm
Spare spool
193230
/660
340 0.10
Aluminium
• U
N
• NE
A
•
Alegra 6600 F - the feeder reel with the revolutionary release clip!
U
W
NE
Feeder 6600
OU VE