Choosing the location - outdoor housing

Choosing the location indoor housing

(continued)

Choosing the location outdoor housing

-storage or processing areas for fruit, vegetables or winegrowing products -areas used in the preparation of grain, green fodder or animal feeds -greenhouses

-The IP 45 protection system means that the FRONIUS IG can be exposed to moisture. However we recommend if possible that direct moisture is avoided. -In spite of the IP 45 protection system the FRONIUS IG Outdoors should if possible not be exposed to the effects of the sun as there is no display film worldwide that is resistant to UV-Rays over a period of time.

However to achieve a long life the FRONIUS IG Outdoors has an exterior casing and a display with a cover slide. -The protection of the display unit provided by the cover slide also increases the life of the film. (The ideal situation is choosing a partially protected fitting position for the FRONIUS IG Outdoors with exterior casing e.g. in the area of the solar module, or under a projecting roof). -FRONIUS IG can be installed vertically as well as horizontally - according to chapter „Fixing the wall mounting for FRONIUS IG Outdoors“. -For use in environments with heavy dust development: If necessary remove the fan plates and clean the integrated fly screen

Do not install the inverter: -where it can be exposed to ammonia, corrosive gasses, acids or salts (e.g., fertilizer storage areas, vent openings of livestock stables, chemical plants, tanneries)