HUYETT.COM • 785 - 392 - 301 7
INDUSTRY USES Shafts & Tool Steel
A hub with an integral key allows Keyed shaft paired with key a keyed shaft to be used without stock or a machine key assemble key stock or a machine key. components in a non-permanent manner.
Ground flat stock is used to produce knife blades, shear blades, chisels, and other precision machining devices.
As its name suggests, drill rod is frequently used to make drill bits, taps, files, hammers, and other hand tools.
Slotted shims are used on assembled machine components for alignment and balance.
Double-split shaft collars can be installed where components will not allow axial installation.
Set shaft collars can be used as a stop on a drill bit to control the depth of the drilled hole.
Flange bearings allow the shaft to slide or spin freely within the bearing.
Thrust bearings are used where rotating objects will create lateral forces.
Sleeve bearings are used in applications with light loads and low rotational speeds.
Shims, Shaft Collars, & Spacers
Arbor shims are installed on either side of a cutting tool to take up slack.
Balls & Bearings
Precision balls are highly precise balls that are used in ball bearing assemblies and in kinematic mounting applications.
Prices, materials, dimensions, tolerances, designs, and grades subject to change without notice. © 2022 Huyett
11