R eproductive M anagement
6
Secure the sheath onto the gun. Depending on the type of gun, ensure the sheath is properly secured as follows:
> a) KombiColor gun – Slide the sheath over the gun barrel until the guide cup comes to the end of the sheath. The lip at the base of the gun will secure the sheath in place. > b) Spiral gun – Slide the sheath over the gun barrel until it touches the spirals. Screw the sheath onto the gun spirals until you meet resistance, bringing the end of the insert at the tip of the sheath.
A
> c) O-ring gun – Slide the sheath over the barrel of the gun and push the o-ring up. Slide the sheath beneath the o-ring and slide the o-ring down the barrel of the gun until it is held firmly in place over the top of the sheath. Twist the o-ring slightly to lock into place.
Note on sheaths: Ensure sheaths are clean and protected. During hot weather, store sheaths in a cool place out of direct sunlight to avoid irreversible shrinking and curling thus rendering them unusable.
B
Finally, make sure all needed equipment is available and functioning properly before starting the A.I. process. This will prevent makeshift improvisation that will undermine a successful insemination. If you have any questions about these semen handling procedures, please do not hesitate to contact your local Genex representative(s). They will help you ensure a successful A.I. program that will generate more pregnancies and maximize herd profitability.
C
For further learning
opportunities
, Check out the following articles on the Genex Learning Center: > > > > > 16
HORIZONS
©2011 CRI
Picture Perfect Technique Semen Handling Checklist Insemination Technique Checklist Proper Gun Loading with ¼ cc Straws Test Your Attention to the Details
www.crinet.com