LEADING IN INNOVATION & DESIGN
BUILT IN LOCK
CYLINDER LOCK END PANEL
ECLIPSE ECLIPSE II
ACROPOLIS TEAM ROOM
MOD-U-VENT 16ga Doors
MOD-U-VENT II 14ga Doors
16ga Doors Honeycomb Both available with 14ga Doors
TITAN II 14ga Doors
THESE LOCKERS ARE TRULY STRONG, SILENT, SECURE AND MAINTENANCE FREE
Our lockers have superb aesthetics, durable Stainless Steel Pockets, and are coated with Standard Polymer Powder Paint or ULTRA ABRASION AND GRAFFITI RESISTANT Polymer Powder Coating providing a 4H hardness rated finish, in the color of your choice.
DECOR® TRI-LOK® LOCKERS DECOR TRI-LOK: Lockers are designed for use in Educational, Institutional, Industrial, Commercial, Mining, Sports, Golf and Government facilities. They are available with Sloping Tops, Bases, Finished End Panels and Filler Trim’s. EXCEPTIONAL APPEARANCE: The aesthetics are superb. Stainless Steel Pockets, recessed number plates on nylon pulls together with a variety of polymer powder door colors with an accent color, make the Decor “Tri-Lok” the locker of choice. FINISH: Locker doors, frames, sloping tops, end panels and trims are also powder coated. Sides, backs, tops, bottoms and shelves are finished in reflecting 223 Oyster Grey. Now available: ULTRA Abrasion and Graffiti Resistant Polymer Powder Coating provides a tough and durable 4H (ASTM D3363 rating) surface finish and, when cleaned with cleaner, can remove 95% of all marker and other ink stains from the surface without sacrificing the finish.
UP-GRADE OPTIONS: The Decor Lockers are available with a waffle honeycomb core for areas of very heavy abuse. However, the formed channels on both vertical edges of the inner and outer door panels (when box welded together) do not require the honeycomb core to provide extra strength.
16 GAUGE ONE PIECE INTEGRAL RIGHT HAND HINGE AND FRAME WITH RETURN FLANGE RIBBED.
All Decor Lockers are also available with either door and frame and/or bodies manufactured from powder coated galvanneal steel for areas of very high humidity. This upgrade is not required for lockers in normal school corridors, change rooms or athletic facilities.
GSS recommends all bases, slope tops, end panels and trim be manufactured in 16 gauge.
MAINTENANCE FREE–NO MOVING PARTS
STANDARD SIZES AVAILABLE 72” (1820mm) Lockers
60” (1520mm) Lockers
48” (1140mm) Lockers
9” 10” 12” 15” 18” 24” 9” 10” 12” 15” 18” 24” 9” 10” 12” 15” 18” 24” 230mm 250mm 305mm 380mm 455mm 610mm 230mm 250mm 305mm 380mm 455mm 610mm 230mm 250mm 305mm 380mm 455mm 610mm 12” 305mm 15” 380mm 18” 455mm 21” 530mm 24” 610mm Single Tier Door Double Tier Doors Triple Tier Doors Four Tier Doors Six Tier Doors (72”) Five Tier (60”)
Five Tier and Six Tier have a single pan 16 ga door. 9” and 10” lockers are available for use with padlock only. Doors are available in 20, 16, and 14 gauge. Other locker sizes not shown on the availability chart may be manufactured if quantities warrant production.
Maximum Security • Door closes on a full length 16 gauge 5/8” wide door strike • Sides have double offsets • Backs are flanged • Shelves have a formed under return edge at the front
Quiet Operation • Doors close on two rubber grommets • Nylon friction catch cushions the door when closing
Hinges • One piece 16 gauge right hand continuous hinge and frame • Return flange of the hinge is ribbed the full length of the locker • .125” diameter steel hinge pin runs the full height of the door with every other knuckle of the hinge staked to it
Maintenance Free – No Moving Parts • Double box welded door, 1 1/8” thick, with double channel down each vertical edge • Single point latch • Provides solid connection between door and both legs of channel formed upright • Hasp welded to both 16 gauge channel formed uprights providing a solid connection
Stainless Steel Pockets • Durable, one piece deep drawn pockets enhance each door Number Plates • Recessed aluminum number plates are riveted onto the heavy-duty nylon door pulls Ventilation and Mildew Prevention • The double channeled 3” high top and bottom frame members are slotted to provide ventilation, preventing formation of mold, mildew and fungus growth
MOD-U-VENT MOD-U-VENT II
ACROPOLIS TEAM ROOM
The Mod-U-Vent and Heavy Duty Mod-U-Vent II Lockers have been designed to give a modern appearance, combined with the strength, ventilation and security required for Athletic Facilities. The rigid full width double-pan box welded door with either a 16 gauge or 14 gauge obround perforated front door panel and 22 gauge full width obround perforated inner door panel closes on a full length 16 gauge door strike.
This Team Room Locker has a 16 gauge top, bottom shelf and back. The 16 gauge sides are fabricated with 3/4” wide by 1 1/2” high diamond shaped perforations. The front panel with its four rows of slotted perforations and the two 16 gauge hat shelf reinforcements under the 16 gauge seat are optional.
Single Point Latching: A 16ga hasp protrudes through a single piece deep-drawn stainless steel recessed pocket. The single piece 12 gauge channel formed hasp is welded to both legs of the 16 gauge channel formed frame member. Doors close quietly on two rubber grommets and a hidden nylon friction door stop. Up-Grade Option: Mod-U-Vent lockers are available manufactured from galvanneal steel for areas of very high humidity. This upgrade is not required in normal change rooms or athletic facilities.
The seat has a 14 gauge continuous spring loaded hinge riveted to the back and to the seat with seven heavy duty rivets. The Recessed Personal Lock-Up (optional) is 12” wide by 16” deep and the sides, door and one-piece continuous hinge are 16 gauge. 4” high bases are optional. The main compartment has 4 coat hooks and a 1” diameter chrome plated coat bar. Sizes: 24” or 33” wide 21” or 24” deep x 72 high
Note: Lockers shall be securely fastened to wall and/or floor at least every third locker. The Decor Locker provides a very durable, attractive finish with a long life expectancy, however, high humidity alone or in combination with chlorine, salts, acids, strong disinfectants or abrasive cleaners can damage the finish. In keeping with our policy of constant improvement, all designs and specifications are subject to change without notice.
ACCESSORIES Locker Benches
Bench Pedestals are 16” high, chrome plated, available in freestanding or stationary. All hardware included. Bench Tops are made from selected top grade maple, laminated together for strength and rigidity. Bench tops are 1 1/8” thick x 9 1/2” wide and are completely sealed with a coat of lacquer applied to top and edges. Standard Stock: 48” and 72” Length
Fire/Waste Lockers available to store fire extinguishers in the top half and waste receptacle in the bottom half. Standard color for door and frame is 835 Macintosh.
Decor® Baskets and Basket Racks Overall size of rack is 42” X 16 3/4” X 72” (1065mm x 425mm x 1830mm) Basket rack shelves, frames and end panels shall be made from prime galvanneal steel. Shelves shall be constructed of 20 gauge(1.0mm). The channel formed cross members to be constructed of 18 gauge (1.2mm) and bolted to end panels. End panels shall be constructed of 20 gauge (1.0mm) and bolted to the shelves. Shelves shall be numbered and have padlock hasps welded to leading edge and have 3 security baffles riveted to the underside of the intermediate and top shelves. Gym baskets to be high density linear polyethylene to eliminate rusting and noise of the shelves with wall thickness not less than.115” (2.9mm). Basket size to be 16 3/8” X 9 1/2” X 9 3/8” (416mm X 241mm X 238mm). Free flow ventilation shall be 20% of sides and 16% of bottom. Baskets shall have provision for locking by means of a padlock and shall be numbered to correspond to numbers on the shelf. Color of baskets are white. Basket rack to be in durable polymer powder 633 Charcoal, shelves to be 223 Oyster. Padlocks are extra.
The Decor® line of lockers, gym baskets and basket racks are designed as matching pieces; ideal for educational, institutional, commercial and industrial applications.
The Retro-Fit Advantage, No Need To: • tear out the old • repaint or refinish • replace trim • upgrade to current Building Codes • wait for summer
Save 50% Over New • RETRO-FIT with GSS “Retro-Fit Frame” • Save Time & Money • Can be done progressively in small quantities • Can be done with your own staff
RETRO-FIT with all welded Door/Frame Assemblies
Experience, Design, Service • GSS has distributors across the country who would be pleased to advise you on how best to RETRO-FIT your facilities with the least amount of disruptions and at an affordable cost. Service: Representatives across USA and Canada.
General Storage Systems Canada 2995 Page Street London, ON N5V 4P6 Ph: 1-800-265-9055 Fx: 519-455-0037 Email: email@example.com
General Storage Systems U.S.A. P.O Box #583 O’Fallon, MO 63366 Ph: 314-517-6975 Ph/Fx: 636-379-0088 Email: firstname.lastname@example.org
Published on Mar 9, 2011