Data and Specifications
The Droplet is anywAiR iO’s multi-purpose wireless (LoRa) IoT environmental sensor. Designed to capture the most useful sensor data, in a small package, with minimum install time.
Measuring Temperature, Humidity, Light (Lux), and Motion , the Droplet sensors collect the most useful environmental data that can be used to monitor, control, and utilize spaces better.
The Droplet is a surface mount sensor, making installation time trivial by eliminating sensor wiring. This greatly reduces cost, and interruption to the building occupants.
LoRa wireless IoT technology provides a very long transmission range that is energy efficient and less susceptible to object interference than other wireless technologies.
Powered by 3 x AA batteries, Droplet sensors have a runtime of 3-5 years depending on the configured push rate.
Technical Data
General
Ordering Information
Device Models
D-LR-TH
D-LR-THL
D-LR-THLM
Configuration
DIP Switch Settings
DIP Switches 1-3
Data Interval/Push Rate
DIP Switch 4* PIR Interrupt Enable
DIP Switch 5 Serial Debug Enable
DIP Switch 6 Hard Reset
DIP Switches 7-8
Testing Mode - Sensor ID Assignment
LoRa RAW wall mount sensor. Temperature, Humidity.
LoRa RAW wall mount sensor. Temperature, Humidity, Light/Lux.
LoRa RAW wall mount sensor. Temperature, Humidity, Light/Lux. Motion (PIR).
Set switch to ON/1 to enable data push on Motion (PIR) detection.
Set switch to ON/1 to enable debug messages over serial.
Hard reset. When the switch is set to ON/1 a new Sensor ID will be assigned everytime the device is powered up.
If switches 7 or 8 are set to 1 (Testing Mode), this will override other Push Rate settings and assign a fixed Sensor ID and send data at a 6 second Push Rate. When both switches are set to 0, the device will use its configured push rate, and self assigned Sensor ID.
Switch Position Sensor ID Assignment
00 Self Assigned ID
10
01
11
*Only on D-LR-THLM
AAB2AAAA - 6 Sec Intervals
BBB2BBBB - 6 Sec Intervals
CCB2CCCC - 6 Sec Intervals
