Capsule Filters
Differential Pressure (kg/cm2)
Polypropylene Capsule Filters – Code CCP • Depth type matrix: High dirt holding capacity, superior retention • Compatible with aqueous solutions and solvents • Thermally welded to prevent fiber slough-off and minimize changes in pore size during filtration • Wide range of particle size cut-offs • Can be sterilized by autoclaving (121˚C, 30 min.) or treatment with ethylene oxide (EtO)
Flow Rate (L/min) Typical water flow rate for CCP-___-D1B at 25°C
Applications • High purity water filtration • Prefiltration to a final membrane filter such as PES or PTFE (CCS, CCF or CCFH) • Ultracleaning • Filtration of process chemicals
Specifications Type Code Nominal rating [μm] % Particle retention Max. Inlet Pressure Max. Operating Temp. Length Code Length [mm]* C 102 D 129 E 201
CCP-LX
CCP-JX
CCP-HX
CCP-FX
CCP-1
CCP-3
CCP-7
CCP-10
CCP-30
0.8 >99 4 kg/cm2 60°C
1.0 >99 4 kg/cm2 60°C
2.0 >99 4 kg/cm2 60°C
3.0 >99 4 kg/cm2 60°C
2-5 94 4 kg/cm2 60°C
5-10 98 4 kg/cm2 60°C
10-20 98 4 kg/cm2 60°C
10-20 92 4 kg/cm2 60°C
20-30 97 4 kg/cm2 60°C
600 1200 2400
500 1000 2000
550 1100 2200
650 1300 2600
400 800 1600
Filtration Area [cm2] 500 550 500 1000 1100 1000 2000 2200 2000
500 1000 2000
*Length given is for capsules with end fixture H.
Ordering Information CCP -
Pore Size Code LX JX HX FX 1 3 7 10 30
78
-
C D E
1
Filtration Area 400-650 cm2 900-1300 cm2 1600-2600 cm2
B D* H N
End Fixture ¼” NPTM ½” NPTM 3 8 ” Hose Barb ¼ 1½” Sanitary fitting
*) When ordering length code “C” (filtration area), end fixture code “D” is not available.