6. Disconnect the electrical connector and remove the headlight
1.
2. 3. 4.
seat (see page 16-9). Disconnect the battery, negative (black) lead first. Remove the cockpit (see page 16-14). Detach the indicator relay from the blade on the headlight. Remove the
1. Headlight assembly 2. Electrical connector
Installation 1. 2. 1. Indicator Relay 2. Relay mounting blade
5. Remove the four fixings from the headlight assembly and detach the headlight from the subframe.
Position the headlight to the motorcycle and connect the electrical connector. Position the headlight to the subframe ensuring the following: •
The indicator relay is positioned above the headlight adjacent to its blade.
• The headlight electrical connector is located inside the cockpit subframe and the wiring is not trapped between the headlight and subframe. • The heated grip and GPS (Global Positioning System) accessory electrical connectors are located above the headlight and not trapped between the headlight and the subframe.
CE 1.Headlight assembly 2. Fixings (left hand shown)
TWUMEH
3. Refit the headlight fixings and tighten to 3.5 Nm. 4. Refit the indicator relay to the tang on the headlight. 5. Refit the cockpit (see page 1615). 6. Reconnect the battery, positive (red) lead first. 7 Refit the seat (see page 16-9). 8. Check the headlight adjustment (see page 17-11).
Service Manual - Tiger
17.13