THE COMPONENTS YOU WILL NEED TO CONSTRUCT THIS PRESENTATION.
HOW TO PRESENT MAGGOT HOOKBAITS 1
Cut 10-12ins of the Camotex Soft coated material and then strip away 3-4ins of outer coating.
5
Position the silicone so it is at the bottom of the bend, set the Hair to the length shown above.
2
Now tie a Maggot Clip to the end of the exposed braid section with a simple 3-turn Grinner Knot.
6
Attach the hook with a Knotless Knot and place a Red Zig Aligna (minus loop at back) over the eye.
3
Slide a 3mm length of the new Trans Khaki Hook Silicone down onto the braid of the hooklink.
7
Open the Clip and carefully thread some maggots onto the point making sure you don’t burst any.
4
Carefully thread the point of your hook through the silicone without snagging the braid.
8
With the clip loaded with maggots simply lock it shut and your maggot rig is ready for action!
TOP
When they get on the maggots the action can be awesome!
Before casting out attach a PVA mesh bag of red maggots to the hook to give added attraction around the hookbait and get quicker bites!
13
Fox Rig Guide 2014_1-13.indd 13
07/04/2014 13:01:57