ANGULATING SPRING SUPPORT TYPE 20 Angulating spring supports type 20 D2 19 to 20 92 14
weld-on bracket
Weld-on brackets type 35 are foreseen as connection parts (see page 3.8).
Dim E is independent of the load setting. It varies under load by the corresponding spring travel (see load table, page 2.3). Adjustment possibility + 50mm.
Connection type
Order details: Angulating spring support type 20 .. .. with 2 weld-on brackets 35 .. .. Marking: .. Operating load/Set load: ‌kN Working travel: ‌ mm up/down
Type
A
d3
E
F
G
H
R
SG
20 D2 19 20 12 14 20 22 14 20 32 14 20 42 14 20 52 14 20 62 14 20 72 14 20 82 14 20 92 14
90 90 115 115 155 180 220 245 245 275
10 10 12 15 15 20 20 30 30 50
370 370 380 390 440 470 535 650 735 815
45 45 50 58 58 65 65 100 100 130
15 15 19 21 21 31 31 50 52 62
260 260 260 260 300 315 370 430 505 550
15 15 20 23 23 30 30 45 45 60
9 9 10 12 12 16 16 22 22 35
Weight Weld-on bracket (kg) 35 29 13 4 35 29 13 4 35 39 13 7 35 49 13 7 35 49 13 15 35 59 19 24 35 59 19 45 35 69 19 70 35 69 19 87 35 79 19 120
L 37.5 max 895 895 1135 1128 1078 1545 1480 1375 1790 1725
weight at Lmin (kg) tube (kg/m) 3.8 1.1 3.8 1.1 4.4 1.3 8.4 2.5 8.4 2.5 14.6 8.0 14.6 8.0 21.1 10.6 21.1 10.6 30.6 16.5
Installation extension for angulating spring support type 20 D9 19 to 20 99 14
Min. thread engagement
Installation dimensions greater than Emax on load reduction possible. Shorter L dimensions can be supplied, but then without adjustment possibility of 37.5mm.
Order details: Extension for angulating spring support type 20 .9 .. L=... mm
2.11
Type
A+50
D
d3
E +87.5 -37.5 min
E +87.5 -37.5 max
20 D9 19 20 19 14 20 29 14 20 39 14 20 49 14 20 59 14 20 69 14 20 79 14 20 89 14 20 99 14
325 325 330 332 382 405 470 550 635 685
42 42 48 60 60 76 76 89 89 102
10 10 12 15 15 20 20 30 30 50
525 525 535 547 597 675 740 835 920 1015
1220 1220 1465 1460 1460 1950 1950 1925 2425 2410
L 37.5 min 200 200 205 215 215 270 270 285 285 330