The FarmShop team meeting with Chairman of the Board Antoni Stolarski and other key staff at the impressive SaMASZ factory in Poland.
In 2024 SaMASZ celebrates their 40th anniversary. In 1984, engineer Antoni Stolarski started manufacturing agricultural machinery in a rented garage in Poland and from these humble beginnings, SaMASZ has grown into a major European and international manufacturer of agricultural machinery for grass harvest and is now an international market leader.
With a presence in more than 70 countries and more than 160,000 mowers produced since its inception in 1984, SaMASZ are leaders on the international stage.
The new state of the art SaMASZ Factory in Poland occupies more than 4 hectares - impressive!
In 2022 SaMASZ produced an incredible 4000+ machines - really impressive!
Guinness World Record
The largest area of grass mowed by a triple-disc mower in 8 hours is 96.2 hectares (237 acres), achieved by SaMASZ
It’s our ‘go to’ mower’ It’s done over 10,000ha
Steve Wood,
What our customers say...
Northland Contractor Steve Wood talks about his set of SaMASZ triples...
“it’s our ‘go to’ mower’.. It’s done over 10,000ha and some rough hectares at that! Its solid, and that is a big thing. You go to work every day, and it goes every day.”
David O’Neill Contracting Ltd based out of Omarama covers a vast area from Tekapo to the Lindis Pass down to Kurow and up the Haka Valley.
These mowers get a fair bit of abuse on Stoney Country. At night sometimes it looks like a fireworks display - they handle it.
We use 2 sets of SaMASZ mowers full time each mowing 2500 - 3000 hectares and a third set which is older as a backup.
Great mowers and the first choice for my next replacement.”
O’Neill Contracting mowing a heavy whole crop - Omarama
Joe Herbert, Otago Contractor is a big fan of SaMASZ mowers and their durability in tough Southland conditions...
“I’ve been running SaMASZ mowers for 9 seasons, had a real good run with them. We do 1500 to 2000 hectares a year with them - stony conditions, rolling hills, a lot of steeper stuff.
The floatation’s just second to none I reckon. They sit on the ground good, follow the contour, don’t leave too much behind, and leave a nice clean finish – probably the cleanest finish I’ve seen. We’re real happy with them.”
Bailey Thompson from GJ Graham contracting on the West Coast...
“Getting into the tail end of the season and not an issue all season... Front mower just over 1 year old and the rear mowers 3 years old now... Very strong mowers.”
for 9 seasons!
Northland
David
Joe Herbert, Otago has been running SaMASZ
The Cutter Bar
Hardened discs
• Special shape improves smooth crop flow and reduces workload
• High abrasion and wear resistance
• Easy replacement
Quick Change Modules with SafeGEAR system
• additional protection for gears inside the cutterbar
• strong, sealed bearings
• quick and easy module replacement even in the field
• reusable after key replacement
Design
• Robust, strong and durable
• Fully welded
• Thick, 6 mm steel shell
Hardened knife holder pins
• modernized shape of the pin increases knife stability
• longer resistance to wear thanks to Geomet® coat
• separate, replaceable element of the cutting disc
Hardened knives
• SaMASZ - highest quality
• Quick knife replacement with special mounting lever
Central Knife Holder
• improved shape of the holder enables thorough cleaning of the cutterbar
• made of high quality hardened steel
• 360* range of rotation
• quick and easy replacement
Anti-Corrosion - E-Coat Protection
25 mm / 1" thick spur gears
• protected with SafeGEAR system
• higher abrasion resistance
• ensure accurate power transfer
• perfect 4 tooth fitting
• low-noise operation
• low-noise, sealed 2RS bearings
Cataphoretic painting (E-COAT) is used to cover elements that require coatings with significant corrosion resistance. At SaMASZ this process is carried out in a fully automated method. Each step is continuously monitored and archived, ensuring the repeatability of the process and the highest coating quality. In addition, it provides high weather resistance, corrosion protection, chemical and mechanical protection and an eye-catching design.
• Mounted / Trailed or 3PL mounted / Single & Double Rotor options MODELS: Z 470 | Z2 780 | Z2 840 | Z2 960
FEED YOUR PROFIT WITH A PEECON
Mixer
PEECON ECO FUTURE EX DEMO 14M 3 NOW AVAILABLE
A great return on investment and the ideal way to increase production from your herd. Peecon Mixer Wagons are made in the Netherlands, have a unique tub design which helps stop feed from ‘boiling over’ and their double action augers result in seriously quick mixing times.
HERBST TRAILERS IN-STOCK
Herbst Loader Transport Trailers
These trailers are ideal for carting diggers, tractors, bales and much more!
IN 19 TONNE AND 21 TONNE
Standard features:
• LED Lights
• Mudguards Front and Rear
• Heavy Duty Ramps – plated with Gripper Bars
• Parking Brake
• Bucket Well in Beavertail
• Quick Hitch Stand – Removable
Other features:
• Sprung Drawbar
• Towing eye Type - Standard Ring / Adjustable Axles - 8 Stud 50KPH (300 x 90)
With a 400L hopper, and a simple calibration system, the FarmMax Airseeder is a ‘must have’ piece of kit. A mulcher / airseeder combination is a perfect tool for managing pasture and re-sowing grass in one pass. GPS calibrated (so seed flow adjusts to suit ground speed) you just set and forget. A fast and efficient way of getting new pasture underway, and turns your mulcher into a more versatile tool, brilliant.
Features:
• Easy to operate, GPS calibrated
• Adjustable seed flow
• On/off switch on Plough Arms
• Quick change seed roller for rates and seed size
• Easy calibration
• Large fans for even distribution
• Easily mounted on a wide range of machine
Operators appreciate the simplicity (and savings) of mulching old grass and reproducing new grass in just one pass, and also making it possible to re-graze cattle in the same paddock about three times faster, as opposed to traditional methods. Air Seeders can be fitted to a range of implements including mulchers, power harrows, and drag harrows to name a few
does not include fitting to machine.
below results from one Northland Farmer!
5 WEEKS
• Open to 1.7m Wide - Euro Hitch
• Carry Round Bales
• Made in Europe
• Move 1000’s of bales
• Euro Hitch
• Lifting Capacity 1300kg
• Opening height 1360mm
• Width 1200mm
SAM Side Feed Wagon 12m3
• Tandem Axel / Side Feed
• 400/60 x 15.5 Forestry Grade tyres/ Swivel Coupling
• Remote Axel Greasing Mudguards
• Safety Chains Brakes (Two Front hubs)
$69,000.00+GST
• 2.5m cutting width / Breakaway System / Covers and Guards
• Compact and Versatile / Wilter available N0W $15,600.00+GST
FarmGuard 2.4m Contractors Blade
• Tractors from 70 - 130HP
• Manganese hardened steel cutting edge
• 85% of total weight on cutting edge
• Full three way adjustment (manual or hydraulic)
• Reversible cutting edge
SAM Orchard Spreader
• 2 cubic metre single-axle
• Spread from the back
• NZ made
• Safety nudge bars
• SAM computer controller
$45,000.00
Kinghitter Series 2i
With Terminator Base
• 4.5m Hydraulic-Hinged Mast,
• Hydraulic Toplink and Side Tilt,
• 270kg Series 2 Hammer
• Heavy Duty 50mm Postcap - RSE
• Series 2 300mm Mastshift Kit
• Rockspike Extractor Kit w/90mm Rockspike
• SD5 3-Bank Fixed Valve 3rd Tier kit for Series 2i
• 3 Bank 3rd Teir Valve kit to operate rockspike/auger
