IntesisHome® PA-AC-WIFI-1
USER’S QUICK START GUIDE
5. LED status information All different LED statuses are summarized in the LED status table. In order to know the current state of the device, please check the table below. LED Color (s)
Behavior
Blue
Blinking
Description Performing WPS connection
Green
Steady
Ready to be connected
Green
Blinking
Checking device configuration parameter values
Red
Blinking
Connecting to access point and server
Yellow
Blinking
Downloading configuration. Wait
Red /Green
Alternate blinking
Error Connecting to Access point or router. Try to connect again and make sure you write the correct password
Yellow /Green
Alternate blinking
Server not reached. Check if there is Internet connectivity on your Access Point or router
Proper LED sequence during configuration process is as follows:
Green Steady
Green Blinking
Yellow Blinking
Red Blinking
Off
Ready
Checking
Configuring
Connecting
Connected & working
Estimated time in one status and transition time from one status to another may vary. Please wait for the complete sequence to finish. If your device is not following this sequence and does not work properly, please visit our support site at www.intesishome.com/support.
6. Changes in your Wi-Fi network If you change your Wi-Fi network password, SSID (network name), your Access Point or router, your IntesisHome® needs to be reconfigured. To do it so, press the IntesisHome® device button during 10 seconds. Once the button is released, the device LED will start blinking Green and then will change to steady Green. Go to section 4 to re-start the configuration process.
7. FAQ and support For any question or problem related with the product or the installation procedure, please visit our support site at www.intesishome.com/support.
6