Powerforce™ & Powerforce+Plus™ Harmonic Dampers Honda & Nissan Dampers
Damper Photos Powerforce Powerforce+Plus Damper not available for this application
Powerforce Part No.
N/A
Powerforce+Plus Part No.
90050
Description
Diameter
Many Honda and Acura racers use the JDM single accessory pulley on their engines. However, that product is not a damper. Our model is a true damper and is dimensionally identical to the JDM pulley. To preserve the life of your crankshaft, a harmonic damper should be used on any race engine.
5.00"
For Honda B-16, Acura GSR and Acura Type R 80055
90055
These dampers are dimensionally identical to the O.E. 1970-'78 Nissan damper. Will also fit 1979-'83 engines requiring only one v-belt pulley. This damper is similar to the popular but now discontinued "Euro" damper from the Nissan Competition Division.
5.12"
For Nissan L-Series 1970-'83
New Import Dampers in Development. Coming soon: Subaru Impreza WRX/STI EJ20, EJ22, Mitsubishi Eclipse 4G63 and 4G63T, and Mitsubishi EVO 8 & 9
Tire Pressue Gauges & Other Assorted Gauges
#11112
#11108 Compression Tester
• Automatic shutoff • Battery included • Reads in .5 lbs. • 0-100 PSI
11105
#11110 Digital Gauge
11104
11106
#11113
Racing Tire Pressure Gauges 11100 0-15 PSI Tire Gauge with 13mm hose and rubber protector 11103 0-60 PSI Tire Gauge with 13mm hose and rubber protector 11104 0-120 PSI Tire Gauge w/Braided Stainless Steel Hose 11105 0-120 PSI Tire Gauge w/Tread Depth Measurement Feature Street Tire Pressure Gauges 11101 0-60 PSI Tire Gauge w/45° end and hard plastic case 11102 0-60 PSI Tire Gauge w/9" long hose and hard plastic case 11106 0-160 PSI Truck Tire Gauge w/rigid extension for wide truck wheels 11107 0-60 PSI Tire Gauge w/long rubber hose and 45° angled end 11110 0-100 PSI Digital Tire Gauge (reads in 1/2-lb. increments) Fuel Pressure Gauges 11112 0-15 PSI Fuel Pressure Gauge for use on carbureted vehicles 11113 0-100 PSI Fuel Pressure Gauge for use on injected vehicles Compression Tester 11108 0-300 PSI Compression Tester - Fits both 14mm and 18mm spark plug holes with dual thread fitting on hose. Sport Ball Pressure Gauge 11109 0-15 PSI Pressure Gauge - For basketballs, and other sport balls
#11100 Tire Gauge w/hose
#11101 Tire Gauge w/hard plastic case
Professional Products Fuel Pressure Gauges feature a 1/8-NPT male pipe nipple on the back, a 1-1/2" diameter face and a chrome bezel. Not liquid filled. Not for use inside the passenger compartment unless a fuel pressure isolator is installed.
2. Pin "B"
To use Tread Depth Measuring Feature on the 11105 Tire Pressure Gauge: 1. Set surface "A" on tire tread. 2. Press down on pin "B" allowing Pin "C" to go into tread. 3. Read tread depth on gauge in either 32nds of an inch or in millimeters.
11107
11109
Digital Readout
CK TRU GE U GA
1. Surface A
3. Pin "C"
41 Phone: 1300 350 351
Fax: 1300 350 454
Web: www.fabre.com.au
Email: info@fabre.com.au