Issuu on Google+

General Catalogue 2005/2006


Pliers ABC

TIP: page 2 with symbols and cutting capacities. Open out the flap when working with the cataloque

Technical Basics

Cutting Pliers for cutting or nipping (Diagonal, Center and End Cutters, Carpenters’ Pincers, etc.)

Gripping Pliers (Flat, Long-Nose and Water Pump Pliers, etc.)

Combined Pliers which can be used for both cutting and for gripping (Combination Pliers, Stork Beak and Radio Pliers, etc.)

Special Pliers for special applications, such as for notching or punching different types of material (Sheet Metal Nibbler, Tile Nibbling Pincer, etc.)

Plier Head Parts (DIN ISO 5742)

Rivet Designs

Types of Joints

point

The plier joint is formed in a number of different ways:

Different types of joint design include:

Forged-on joint axis: The rivet is part of one handle of the pliers (forged out of just one piece) - high level of stability for heaviest duty - long service life

Lay-on joint: The two halves of the pliers are placed on top of each other but not milled out.

gripping surface recess (pipe grip) jaw flank side cutter

Basic shapes of jaws

Joint with inserted rivet: A proved, sturdy and precise rivet connection for all standard pliers

Single joint: Half thickness of each plier handle is milled away in the joint area so that both handles can be laid into each other.

flat jaws

half-round jaws

round jaws

Screwed joint: for particularly demanding requirements in terms of precision and smooth operation, e.g. in circlip pliers and cable cutters (even the finest multistranded conductors have to be cut cleanly)

Box joint: One handle of the pliers is slit. The other handle is pushed through this slit. This joint design can withstand a high level of load and strain because the joint bolt is supported on both sides and the pushed through handle has two side ways bearings.


The maximum values indicated always stay for the performance limit under the most favourable cutting conditions, when the wire is placed as near as possible to the joint.

Cutting Capacities Table Cutting Capacity Article-No. Length

61 01 62 12 64 0. 64 11 64 12 64 22 64 32 64 42 64 52 64 62 64 72 67 0.

68 01

69 0. 70 . .

71 . . 74 0.

74 91

200 120 115 115 115 115 120 115 115 120 120 140 160 200 160 180 200 130 110 125 140 160 180 200 140 160 180 200 250 250

9 9 Ø mm 1.0 - 6.0 0.3 - 1.0 2.0 0.3 - 1.4 2.0 0.8 1.5 1.5 1.3 0.6 1.5 4.0 4.0 4.0 4.0 4.0 4.0 0.4 - 2.0 3.0 3.5 4.0 4.0 4.0 6.0 4.0 4.0 4.0 4.0 4.0 5.0

9 Ø mm 9

Cutting Capacity

9 9 Ø mm

9 9 Ø mm

3.5

3.0

4.0 0.7 1.0 0.8 0.8

0.6 – 0.5

1.0 1.0

0.5 0.5

3.1 3.4 4.2 2.8 3.2 3.5 1.3 2.0 2.3 2.5 2.8 3.0 5.2 3.1 3.4 3.8 4.2 4.6 5.0

2.0 2.5 3.0 2.3 2.5 2.8 1.0 1.2 1.5 1.8 2.0 2.5 4.0 2.0 2.5 2.7 3.0 3.5 3.8

Page

1.5 2.0 2.5

0.75

3.6 1.5 2.0 2.2 2.5 3.0 3.5

Article-No. Length

55 55 56 56 56 56 56 56 56 56 56 57 57 57 58 58 58 58 59 59 59 59 59 60 62 62 62 62 62 61

75 02 75 12 75 22 75 32 75 52 76 01 76 11 76 21 76 81 77 01 77 11 77 21 77 22 77 32 77 42 77 52 77 72 78 03 78 13 78 23 78 31 78 41 78 61 78 71

125 125 125 125 125 125 125 125 125 115 130 125 115 130 115 130 115 130 115 130 115 115 125 125 125 125 125 125 125

9 9 Ø mm 0.2 - 1.3 0.2 - 1.3 0.2 - 1.3 0.2 - 1.3 0.2 - 1.3 0.4 - 2.5 0.4 - 2.5 0.4 - 2.5 0.4 - 1.3 0.3 - 1.6 0.3 - 2.0 0.2 - 1.3 0.3 - 1.3 0.4 - 1.6 1.5 2.0 1.5 1.5 1.3 1.5 1.5 0.8 0.2 - 1.6 0.2 - 1.6 0.2 - 1.0 0.2 - 1.0 0.2 - 1.0 0.2 - 1.6 0.2 - 1.6

9 Ø mm 9 1.0 1.0 1.0 1.0 0.6 1.0 1.0 1.0 1.0 1.2 1.5 1.0 1.0 1.3

9 9 Ø mm

9 9 Ø mm

0.6 0.6 0.6 0.4 0.5 0.6 0.6 0.6 0.6 0.5 0.8 0.6

0.4 0.4 0.4 0.4 0.3 0.4 0.4

Page

0.5 0.5 0.5 0.5 0.5 1.0 1.0 0.6

1.2 1.2

0.6 0.6

63 63 63 63 63 63 63 63 63 64 64 64 64 64 64 64 64 64 64 64 64 64 66 66 66 66 66 66 66

Symbols

ESD

ESD electrostatic discharge, dissipative

opening spring

flat jaws

copper + aluminium cable single-strand and multiple conductor

wire clamp

half-round jaws

copper + aluminium cable single conductor fine-stranded

center cutter

round jaws

copper + aluminium cable single conductor solid

cutting edge with bevel

gripping surfaces smooth

cutting edge with small bevel

gripping surfaces serrated

Electronics

KNIPEX high leverage tools jaws angled

Fe

iron wire rope ribbon cable soft wire

box joint

cutting edge without bevel for flush cut

gripping surfaces crosswise serrated

medium hard wire hard wire piano wire


Cutting edges Technical Basics Direction and Position of the Cutting edges

Cutting edge shapes DIN ISO 5742

End Cutters with bevel (outside bevel)

Oblique Cutters with small bevel (outside bevel) Diagonal Cutters

without bevel (outside bevel)

Center Cutters

Safety instructions • When using cutting pliers: beware of wire ends flying off. Wear protective goggles and - if needed - gloves. • Each tool should only be used for its specified purpose. • Only handles marked with the symbol are insulating.

Wire classes Material examples

Type of wire

Tensile strength N/mm2 kp/mm2

copper, plastics

soft wire

220

22

nail, wire pin

medium hard wire

750

75

wire rope strand, steel wire

hard wire

1800

180

spring steel wire

piano wire

2300

230


Structure of Article Number

Finish of Pliers

Article-No.

Head / Handles

03 0 0 180 0

Head polished

Basic Model (e.g. Combination Plier)

1

Head polished

2

Head polished

3

Plier chrome plated

4

Plier chrome plated

5

Plier chrome plated

6

Plier chrome plated

7

Plier chrome plated

Style e.g. straight

Finish e.g. head polished, handles black atramentized

Length e.g. 180 mm

Care Tip A drop of oil on the polished surfaces and in the joint keeps your pliers in good working order and extends their service life!

Handles black atramentized

Handles plastic coated

Handles with two-colour dual component handles

Handles plastic coated

Handles with two-colour dual component handles

Handles insulated with two-colour dual component VDE-tested DIN EN/IEC 60900

Handles dipped plastic insulated VDE-tested DIN EN/IEC 60900


Contents The full extent of the range Combination Pliers

No. Article 01 08 02 03

Gripping Pliers

Page

Combination Pliers Small Combination Pliers High Leverage Combination Pliers Combination Pliers

13 13 14

No. Article 20 22 19 23

15 26

Stripping Tools

No. Article

Page

11 Wire Strippers 11 92 Electronics Wire Stripper 12 Automatic Insulation Strippers 12 12 Universal Insulation Strippers 12 40 Self-Adjusting Insulation Strippers 12 42 Multistrip 10 12 60 Self-Adjusting Insulation Stripper 12 62 Self-Adjusting Insulation Stripper 12 80 Mini Stripping Tool 12 82 Wire Stripper for Fibre Optics 12 85 Stripping Tool 13 Electricians´ Pliers 13 72 Universal Plier 14 Diagonal Insulation Strippers 15 Insulation Strippers 15 11 Coated-Wire Stripping Tweezers 16 20 Dismantling Tools 16 30 Dismantling Tool 16 40 Dismantling Tool 16 60 Coax-Stripping Tool 16 65 Stripping Tool for Data Cable 16 80 Universal Stripping Tools

6

17 18 18

27 28 29 31 30 32 33 35 35 36 37 38

Circlip Pliers

Page

Flat Nose Pliers Round Nose Pliers Jewellers´ Pliers Flat Nose Plier with cutting edges Snipe Nose Side Cutting Pliers Telephone Plier Assembly Pliers Telephone Pliers Grab Pliers Long Nose Pliers Relay Adjusting Pliers Duckbill Pliers Electronics Pliers Electronics Pliers ESD Electronics Mounting Pliers Relay Adjusting Pliers Mechanics´ Pliers

29 30 31 31 33 34 34 35 35 36 37 37 38 39 41 42 43

No. Article 45 46 44 46 48 49

Cutting Nippers

Page 47

Special Retaining Ring Pliers External Circlip Pliers for fitting Grip Rings Internal Circlip Pliers External Circlip Pliers Precision Internal Circlip Pliers Precision External Circlip Pliers

47 48 49 50 51

Carpenters´ Pincers

Grip Pliers 19

No. Article 50 51 55 56 57 58

20 21 20 21 22 22 22 23 23 24

No. Article 40 41 42

Universal Grip Pliers Grip Pliers Welding Grip Pliers

Page

Page

Carpenters´ Pincers Carpenters´ Pincer Farriers` Pincer Farriers` Pincer Unsoling Pincer Potters` Pincers

52 52 53 53 53 53

No. Article 61 62

Page

Bolt End Cutting Nipper Electronics Oblique Cutting Nipper 64 Electronics End Cutting Nippers 64 Electronics End Cutting Nippers ESD 67 High Leverage End Cutting Nippers 68 End Cutting Nippers 69 Mechanics End Cutting Nippers 70 Diagonal Cutters 71 KNIPEX-"CoBolt" 72 51 Diagonal Cutter for fibre optics 72 11 Diagonal Cutters for plastics and lead 74 91 Center Cutter 74 High Leverage Diagonal Cutters 75 Electronics Diagonal Cutters 76 Electro-Mechanics´ Diagonal Cutters 77 Electronics Diagonal Cutters 77 Electronics Diagonal Cutters ESD 78 Electronics Super-Knips 78 Electronics Super-Knips ESD

57 57 58 59 59 60 60 61 62 62 63 63 64 65 65 66 67 68 69

Concretors´ Nippers Pipe Wrenches

44 44 45

24 24 25 25 26 27 27 27

No. Article 99 0 Concretors` Nippers 99 1 High Leverage Conretors´ Nippers

Page 55 55

No. Article 81 03 82 51 84 83 87 0

Pipe Gripping Pliers Angle Nose Battery Plier Cycle Pliers Pipe Wrenches KNIPEX-"Cobra" XL / XXL

Page 71 71 71 72 73


No. Article 86 0 87 0 87 1 87 41 88 0 89 0 90 0

Insulated Tools

Cable and Wire Rope Cutters

Water Pump Pliers

Page

Plier Wrenches KNIPEX-"Cobra" KNIPEX-"Cobra..matic" Multiple Slip Joint Spanner KNIPEX-"Alligator" Water Pump Pliers Small Water Pump Pliers

74 75 76 76 77 78 78

Special Pliers

No. Article 94 10 94 15 94 35 95 02 95 03 95 05 95 95 3 95 61 95

Page

Cutter for Plastic Pipes Cutter for Ribbon Cables Mitre Shears Vinyl Shears Shears for KEVLARÂŽ Fibres Combination Shears Cable Shears Cable Cutters Wire Rope Cutter Wire Rope and Cable Cutters

89 89 90 90 91 91 92 95 96 97

Crimping Pliers and Cable Links

No. Article 90 25 90 4 90 55 90 61 90 71 91 00 91 11 91 30 91 5 91 6

Pipe Cutter Punch Lock Riveters Sheet Metal Nibbler Notching Pliers Revolving Punch Plier Tile Nibbling Pincer Tile Breaking Pincer Glass Breaking Pincer Glass Nibbling Pincers Flat Nose Grozing Plier

Page 79 80 80 81 81 82 82 82 83 83

No. Article 97 00 97 21 97 32 97 40 97 43 97 43 97 49 97 50

Tweezers

97 51 97 52 97 52

No. Article 92 92 92 92 92

Precision Tweezers Precision Tweezers ESD Precision Tweezers VDE Plastic Tweezer Cross-Over Tweezers

Page 84 86 86 87 87

97 52 97 53 97 97 90 97 99

Page

Crimp Grip Pliers Crimping Pliers Crimping Plier Insertion Tool for LSAPlus and identical Lever Action Crimping Pliers for shielded Western Plugs Crimp System Pliers Crimp Profiles Crimping Plier for Scotchlok Connectors Crimping Plier for Western Plugs Four-Mandrel Crimping Pliers for turned contacts Lever Action Crimping Pliers Crimping Pliers "PreciForce" Self-Adjusting Crimping Pliers for End Sleeves Crimping Pliers for End Sleeves (ferrules) Crimp Assortments Cable Connectors

Tool Kits

DIN EN/IEC 60900

99 99 100 100

No. Article 01 11 14 22 70 92 88 95 95 98 98 98 98 98 98 98 98 98 98 98 98 98 98 98 98

Combination Pliers Wire Strippers Diagonal Insulation Stripper Round Nose Pliers Diagonal Cutters Precision Tweezers KNIPEX-"Alligator" Cable Shears Cable Cutters Wrenches Screwdrivers Nut Drivers Reversible Ratchets Hexagon Sockets Cable Knives Torque Wrench Reversible Ratchet Dismantling Knives Voltage Tester Electricians' Gloves Plastic Slip-On Caps Insulating Plastic Clamp Insulating Mats Compact Tool Case Junior Hacksaw

Page 116 117 118 119 121 122 122 123 125 126 127 127 129 130 131 131 131 132 133 134 134 134 135 135 135

Sales Aids

101 102 103 104 104 105 106 107 108 110 111 113

No. Article 00 19 00 19 00 19 00 19 00 19 00 19 00 19

Display Panel Sales Displays Test Supports Sales Displays Rotary Sales Stand Tool Bar (Pegboard) Show-Cabinets for Product Presentation 00 19 Brochure Holder 00 19 Hooks for perforated board 00 19 Plier Racks

Page 139 140 140 141 142 144 145

No. Article 00 19 00 19 00 19 00 20 00 20 00 21 00 21

Circlip Pliers Sets Tool Pouch Tool Roll Pliers Sets Electronics Pliers Sets Tool Bag Tool Cases

Page 148 148 148 149 150 152 155

Electronic Pliers

No. Article

Page

11 92 Electronics Wire Stripper 18 12 60 Self-Adjusting Insulation 20 Stripper 35 Electronics Pliers 38 35 Electronics Pliers ESD 39 36 Electronics Mounting 41 Pliers 62 Electronics Oblique 57 Cutting Nipper 64 Electronics End Cutting 58 Nippers 64 Electronics End Cutting 59 Nippers ESD 75 Electronics Diagonal 65 Cutters 76 Electro-Mechanics´ 65 Diagonal Cutters 77 Electronics Diagonal 66 Cutters 77 Electronics Diagonal 67 Cutters ESD 78 Electronics Super-Knips 68 78 Electronics Super-Knips 69 ESD 92 Precision Tweezers 84 94 15 Cutter for Ribbon Cables 89 00 20 Electronics Pliers Sets 150

146 146 147

7


KNIPEX – The Company

Experience

Quality for professionals

Specialists

KNIPEX specializes in the development and production of high-quality pliers and is Europe’s leading manufacturer of these products. It all started back in 1882 when C. Gustav Putsch set up his own forge shop in Cronenberg (now a suburb of Wuppertal). We are an independent fourth-generation family company.

KNIPEX pliers satisfy the highest expectations in terms of performance, ergonomics and service life. Our products are designed to meet the requirements of professional users, who must be able to rely on their tools in day-to-day work.

We concentrate our knowledge and expertise on pliers. This is the only way to justify our claim that we are the best supplier in terms of quality, innovation and efficiency. Our success is assured by 650 qualified employees and we attach the greatest importance to their basic and advanced training.

Everything under one roof

The complete range With over a thousand separate styles and sizes KNIPEX offers a complete range of pliers for almost every application in trade and industry. The breadth and depth of our range ensures that the best tool can always be found for each application.

8

In Wuppertal we have 45,000 m2 (500,000 square feet) of factory space. All manufacturing operations, from forging (including making the forging die) to packaging, are done on our own premises. This method allows us to maintain stringent quality control standards and to co-ordinate all aspects of the manufacturing process.


Material

Tip-top technology

Innovation

In the tough and demanding world of everyday usage, KNIPEX pliers meet the challenge to the fullest satisfaction. In terms of material and construction, they are designed to function as heavy duty tools and deliver high load bearing capacity and long service life.

Innovation and high performance are not only characteristics of the tools we make but are also key elements in our production engineering. Modern state-of-the-art machinery ensures that we produce consistently high precision at the most economical cost ratio.

KNIPEX pioneers ideas in plier design. Again and again, KNIPEX’s innovations offer future-oriented solutions and set standards for easy, effective and reliable work. For our development work we rely on an intensive sharing of experience with users. We utilize the most modern design technology and the highest efficiency testing and experimental equipment.

Partners in trade KNIPEX pliers are supplied only through distribution. We do not deliver direct to end users. We offer our partners in trade a high level of inventory availability, extensive consulting and training and a wide variety of sales support.

KNIPEX throughout the world KNIPEX pliers are in great demand throughout the world and we export over 60% of our production. An international network of distribution branches, agencies and importers connect us to our customers in over one hundred countries.

9


KNIPEX – Ergonomics Practical Advantages Ergonomics is the science of adapting technology to people in order to make work easier. Pliers, like other hand tools, should support the human hand-arm system as effectively as possible and at the same time keep strain and effort to a minimum. When designing KNIPEX pliers, we give extensive consideration to ergonomic criteria. Our aims are to ensure that they

ERGONOMICS

– require only a minimum of force in use – assure hand and finger joints a low-stress comfortable position when exerting force – allow good contact between the hand and handle.

Less force exerted due to the self-locking function of the "Cobra” and "Alligator” Water Pump Pliers. As the gripping jaws automatically bite tightly into the workpiece, there is no need to squeeze the handles together. This relieves the hand muscles.

Reduction of effort Cutting hard material in particular usually requires great manual effort but KNIPEX pliers require much less force thanks to their particularly favourable leverage ratios, which are to some extent due to unique lever designs. The benefit for the user is that they noticeably reduce the amount of force he has to apply. Particularly high leverage plier models in this catalogue are marked with a power symbol.

F2 = 3971 N l2 = 21 mm

High Leverage Concretors’ Nippers: 27% saving in power

KNIPEX "CoBolt”: 61% saving in power

l1 = 250 mm

F1 = 300 N

Cutting through 3-mm-diameter (1/8” dia.) binding wire using a High Leverage Concretor’s Nipper requires only 300 N (30.0 kp) force as opposed to 412 N (41.2 kp) with a normal Concretor’s Nipper of the same length.

10

Cutting through 2-mm-diameter (1/16” dia.) piano wire using the KNIPEX "CoBolt” requires only 192 N (19.2 kp) force as opposed to 499 N (49.9 kp) with a High Leverage Diagonal Cutter of the same length.


smaller contact surface in case of plastic coated handles

contact surface of dual component handles A particularly advantageous solution for favourable hand positioning is offered by the Ratchet Action Cable Cutter Art No. 95 31 with a two-stage mechanism. Depending on the required hand force, a lower (one-stage mode) or higher (two-stage model) handle distance can be selected.

The contact surfaces in pliers with two-colour dual component handles are more than twice as large as pliers with plastic coated handles. The force is distributed to across larger surface – this reduces the pressure correspondingly.

Gentle on the wrist

Hand-compatible handle design

A lot of KNIPEX pliers are available with various plier head shapes and positions. This means that the plier can be adapted to the application and the hand held in a natural and strain-relieving position. Also, the spacing between the handles is engineered to ensure the best possible deployment of force (too wide or too narrow a space between the handles makes it more difficult to apply the required force).

The shaping and material designing of KNIPEX multi-component handles are the result of extensive studies into gripping patterns and movement flows when working with pliers. The hand force is distributed over as large a surface as possible which permits a high transfer of force and prevents pressure points forming on the hand. The handles have different zones which make allowance for the interaction between hand and handle and their different aspects: holding – sliding - guiding.

Initial cut Final cut

1

2

Gripping zone

3

Movement zone

The cable shears 95 11 200 with twin cutting edge makes it possible to cut through cables of up to 20 mm in diameter. Due to the two stage cutting process, the handles always remain in an ergonomic position when force is applied, even when used on large cross-sections. Examples of specially designed plier heads for work in confined working areas

High Leverage Diagonal Cutter Article No. 74 with angled head

Positioning and supporting zone The shape of the upper part of the handle offers support, especially where forces take effect in a longitudinal direction.

Use of softer material with a better grip where force needs to be applied and slipping prevented.

Use of harder material with less friction where the hand needs to move along the handle

11


01

01 Combination Pliers,

Chrome Vanadium DIN ISO 5746

01 06 190

Article-No. 9 EANLength mm

9 Head

9 Handles

왘 for heaviest duty 왘 with gripping zones for flat and round material, suitable for versatile use 왘 with cutting edges for soft, hard and piano wire 왘 long cutting edges for thicker cables 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC

9 Cutting capacities

왘 particularly wear resistant gripping jaws due to additional hardening; hardness of the gripping jaws approx. 53 HRC 왘 Chrome Vanadium electric steel, oil-hardened and tempered



Code 4003773-

01 06 160

040729

190

040415

chrome plated chrome plated

insulated with two-colour dual component handles VDE-tested

08

ø mm ø mm ø mm mm2 2.0 1.5 10.0 16.0

g 210

2.5

300

2.0

13.0 25.0

08 Small Combination Pliers 왘 compact combination pliers for professionals and hobbyists 왘 with gripping zones for flat and round material, suitable for versatile use 왘 with cutting edges for soft and hard wire 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 60 HRC 왘 Vanadium steel, oil-hardened and tempered

08 05 110

Article-No. 9 EANLength mm

9 Head

9 Handles

9 Cutting capacities

Model 08 15 110: 왘 with leather pouch; a special gift



Code 4003773-

08 05 110

034957

08 15 110

015390

chrome plated chrome plated

ø mm ø mm ø mm mm2 with two-colour 2.5 1.6 9.0 10.0 dual component handles with two-colour 2.5 1.6 9.0 10.0 dual component handles, with leather pouch

g 90 100

13


02

02 High Leverage Combination Pliers DIN ISO 5746

02 01 180

02 02 180

왘 for heaviest duty 왘 35% saving in power due to new, improved lever action 왘 with gripping zones for flat and round material, suitable for versatile use 왘 with cutting edges for soft, hard and piano wire 왘 long cutting edges for thicker cables 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC 왘 high grade special tool steel, oil-hardened and tempered

KNIPEX High Leverage Combination Pliers with optimum position of the joint facilitate cutting as well as powerful gripping, bending and pulling.

Requires 35 % less effort Cutting a hard wire of 2.0 mm dia. with a High Leverage Combination Plier of 180 mm length requires a handforce of only 318 N (31.8 kp) instead of 486 N (48.6 kp) with a common Combination Plier of same length.

02 05 180

02 06 200

02 07 225 Induction hardened cutting edges also suitable for piano wire

Gripping zone for round material

Article-No. 9 EANLength mm

02 01 180 200 225 02 02 180 200 225 02 05 180 200 225 02 06 180 200 225 02 07 200 225 14

9 Head

9 Handles

9 Cutting capacities



Code 4003773-

013174 013181 013198 034896 034902 043379 043072 043089 010005 010012 010029 010036 022299 022305

polished

plastic coated

polished

with two-colour dual component handles

chrome plated

with two-colour dual component handles

chrome plated

insulated with two-colour dual component handles VDE-tested plastic dipped insulated VDE-tested

chrome plated

ø mm 2.5 2.8 3.0 2.5 2.8 3.0 2.5 2.8 3.0 2.5 2.8 3.0 2.8 3.0

ø mm 2.0 2.2 2.5 2.0 2.2 2.5 2.0 2.2 2.5 2.0 2.2 2.5 2.2 2.5

ø mm mm2 11.5 16.0 13.0 25.0 14.0 25.0 11.5 16.0 13.0 25.0 14.0 25.0 11.5 16.0 13.0 25.0 14.0 25.0 11.5 16.0 13.0 25.0 14.0 25.0 13.0 25.0 14.0 25.0

g 205 280 360 235 330 400 235 330 400 240 335 405 385 490

Powerful gripping, pulling and bending thanks to high leverage


03

03 Combination Pliers DIN ISO 5746

03 01 180

왘 with gripping zones for flat and round material, suitable for versatile use 왘 with cutting edges for soft and hard wire 왘 long cutting edges for thicker cables 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 60 HRC 왘 special tool steel, oil-hardened and tempered

Gripping zone for flat material

03 02 180

Gripping zone for round material

03 05 180

03 06 180

Cutting edges for wire and cable

Article-No. 9 EANLength mm

03 00 180 200 250 03 01 140 160 180 200 250 03 02 160 180 200 03 05 140 160 180 200 03 06 160 180 200 03 07 160 180 200 250

9 Head

9 Handles

9 Cutting capacities



Code 4003773-

015161 015178 015185 015192 013235 013242 013259 015222 023203 023197 034940 039730 039518 034933 041146 021902 021926 033776 015307 015314 015321 015345

polished

black atramentized

polished

plastic coated

polished

with two-colour dual component handles

chrome plated

with two-colour dual component handles

chrome plated

insulated with two-colour dual component handles VDE-tested plastic dipped insulated VDE-tested

chrome plated

ømm 3.4 3.8 3.8 2.8 3.1 3.4 3.8 3.8 3.1 3.4 3.8 2.8 3.1 3.4 3.8 3.1 3.4 3.8 3.1 3.4 3.8 3.8

ø mm 2.2 2.5 2.5 1.8 2.0 2.2 2.5 2.5 2.0 2.2 2.5 1.8 2.0 2.2 2.5 2.0 2.2 2.5 2.0 2.2 2.5 2.5

ø mm mm2 12.0 16.0 13.0 16.0 15.0 25.0 9.0 10.0 10.0 16.0 12.0 16.0 13.0 16.0 15.0 25.0 10.0 16.0 12.0 16.0 13.0 16.0 9.0 10.0 10.0 16.0 12.0 16.0 13.0 16.0 10.0 16.0 12.0 16.0 13.0 16.0 10.0 16.0 12.0 16.0 13.0 16.0 15.0 25.0

g 210 260 440 110 180 220 280 480 215 260 330 135 215 260 330 220 265 335 265 305 380 610

15


11

11 Wire Strippers 왘 for single, multiple and fine stranded conductors with plastic or rubber insulation max. 5.0 mm dia. or resp. 10.0 mm2 cable cross section 왘 easy adjustment to the required diameter of solid or stranded wire with knurled screw and lock nut 왘 special tool steel, oil-hardened and tempered

11 01 160

Style 0: 왘 with opening spring Style 1: 왘 without opening spring

11 02 160

11 05 160

11 06 160

Article-No. 9 EANLength mm

9 Style

9 Head

9 Handles

Code 4003773-

11 01 160 11 02 160

013556 023180

11 05 160

039570

11 06 160

021933

11 07 160

015499

11 12 160

034964

11 15 160

042471

11 17 160

015505

0

0

polished polished chrome plated chrome plated

1 1

chrome plated polished chrome plated chrome plated

plastic coated with two-colour dual component handles with two-colour dual component handles insulated with two-colour dual component handles VDE-tested plastic dipped insulated VDE-tested with two-colour dual component handles with two-colour dual component handles plastic dipped insulated VDE-tested

9 Stripping capacities



ø mm mm2 AWG g 5.0 10.0 7 135 160 160 165

195 160 160 195

17


11

11 Electronics Wire Stripper 왘 for single, multiple and fine stranded cables with 0.1 up to 0.8 mm dia. with plastic or rubber insulation 왘 easy adjustment to the required diameter of solid or stranded wire with knurled screw and lock nut

11 92 140

Article-No. 9 EANLength mm

11 92 140

9 Head

9 Handles

4003773-

016908

polished

ø mm with two-colour 0.1 - 0.8 dual component handles

g 100

12

12 Automatic Insulation Strippers

12 11 180

12 11 180 9 Head

9 Handles



9 Stripping capacities

Code 4003773-

12 11 180

000792

12 21 180

000815

12 19 180 12 29 180

022145 022152

18

왘 with replaceable blades of special steel for 4 and 6 positions resp. for different wire cross sections 왘 leaves wire undamaged; even multi-stranded conductors are stripped gently 왘 during stripping, the wire is held firmly by clamping jaws 왘 with length stop for constant stripping length during repetitive work 왘 a spring leads the stripper back to the starting position 왘 strong light-metal body

12 21 180

Article-No. 9 EANLength mm



9 Stripping capacities

Code

ø mm nickel plastic handles 0.5/1.2/ plated 1.6/2.0 nickel plastic handles plated 1 pair of spare blades for 12 11 180 1 pair of spare blades for 12 21 180

mm2

0.5-0.75/1.0/ 1.5/2.5/4.0/6.0

ø Inch 1⁄64 / 3/64 1/16 / 5/64

AWG

g 400

20-18/17/ 400 15/13/11/9

왘 with opening spring 왘 the polish together with a fine film of oil offer the best possible rust protection - no circuit faults caused by peeling chrome from plated tools 왘 special tool steel, oil-hardened and tempered


12

12 Universal Insulation Strippers,

particulary suitable for Teflon® 왘 with new stripping mechanism 왘 precise blade shapes prevent damage to the conductor and make it easy to strip difficult insulating materials such as Teflon®, silicone and rubber 왘 leaves wire undamaged; even multi-stranded conductors are stripped gently 왘 with length stop for constant stripping length during repetitive work 왘 4 replaceable blades 왘 smoothly operating mechanism 왘 compact design, lightweight construction 왘 high operation comfort thanks to handy shape

12 12 02

Model 12 12 02: 왘 with additional cable guide for exact positioning of the conductor in the stripping area of the blade

12 12 06

12 12 02 with cable guide and length stop

12 12 02

Precise cutting of the insulation to a complete extent

9 Head

9 Handles

12 12 10

12 12 02

048077

12 12 06 12 12 10 12 19 02 12 19 06 12 19 10

049005 049012 049036 049043 049050



9 Stripping capacities

Code 4003773-

Insulation

Copper Conductor

Positive stripping thanks to precise shape of the blades

12 12 06

Article-No. 9 EAN-

Two pairs of blades (1) cut the insulation to a complete extent. Then the blade pairs move apart, and thus the insulation is removed formfit (2). The plier opens automatically after the stripping procedure.

mm2 0.03 - 2.08

nickel plated two-colour dual component handles nickel plated two-colour dual component 0.14 - 6.00 nickel plated two-colour dual component 2.50 - 10.00 spare blades for 12 12 02 spare blades for 12 12 06 spare blades for 12 12 10

AWG 32 - 14

Length mm 195

g 430

26 - 10 13 - 7

195 195

430 430

Teflon® is a registered Trademark of E. I. du Pont de Nemours and Company

19


12

12 Self-Adjusting Insulation Strippers 왘 for single, multiple and fine-stranded wire cables with plastic or rubber insulation 왘 adjusts automatically to the respective cable cross-section, which prevents damage to the conductor 왘 cutting depth can be adjusted for different insulation materials 왘 with wire cutter for copper and aluminium wires, multiple strand up to 10 mm2 and single strand up to 6 mm2 왘 smoothly operating mechanism 왘 easily interchangeable blades and plastic jaws 왘 low weight 왘 body made of tough fibreglass reinforced plastic

patented

12 40 200

0.03 - 10.0 mm2

Adjustable length stop

Precise stripping prevents damage to the conductor

Article-No. 9 EAN-

9 Stripping capacities

Length mm

12 40 200 12 49 01 12 49 02 12 49 03 12 50 200 12 59 01 12 59 02

KNIPEX Self-Adjusting Insulation Strippers are indispensable for the electrical installation; fast and secure working in a large range of application.

Model 12 40 200: 왘 range of application: conductors 0.03 - 10.0 mm2 왘 for thin ribbon cables up to 10.0 mm width in a single pass 왘 length stop adjustable from 3.0 - 18.0 mm and easily interchangeable Model 12 50 200: 왘 range of application: conductors 2.5 - 16.0 mm2

Wire cutter for multiple strand wire cables up to 10.0 mm2

9 Length stop



Code 4003773-

026662 026679 026686 026693 034407 034414 034421

mm2 0.03-10.0 spare blades spare clamping jaws spare length stop 2.5-16.0 spare blades spare clamping jaws

AWG 32 - 7 for 12 40 200 for 12 40 200 for 12 40 200 13 - 5 for 12 50 200 for 12 50 200

12

mm 3.0-18.0

g 200

200

12 Self-Adjusting Insulation Stripper

12 60 135

Article-No. 9 EANLength mm

12 60 135 12 69 135 20

9 Stripping capacities

왘 for single, multiple and fine-stranded wire cables with plastic or rubber insulation of 0.08 - 1.0 mm2 왘 adjusts automatically to the respective cable cross-section, which prevents damage to the conductor 왘 for thin ribbon cables in a single pass 왘 with wire cutter for copper and aluminium wires, multiple strand up to 1.0 mm2 왘 length stop adjustable from 2.5 - 7.0 mm

9 Length stop

왘 왘 왘 왘

easily exchangeable blades smoothly operating mechanism low weight body made of tough fibreglass reinforced plastic



Code 4003773-

022169 022176

mm2 AWG 0.08-1.0 28 - 17 spare blades for 12 60 135

mm 2.5-7.0

g 90

Adjusts automatically to the respective cable cross-section from 0.08 – 1.0 mm2


12

”Multistrip 10“, patentiert

12 42 195

0,03 - 10,0 mm2

Steel restrain jaws with cutting edges avoid skidding of the cable

Article-No. 9 EANLength mm

12 42 195 12 49 21 12 49 22 12 49 23

Code 054580 057581 057598 057604

Self-Adapting Universal Insulation Stripper

왘 fully automated adjustment to different cross-section depending insulation thicknesses throughout the stripping range from 0.03 - 10.0 mm2 왘 the so far common fine adjustment of the tool is no longer necessary due to the unique self-infeeding of the cutting depth preventing damage to the conductor 왘 the steel-made clamping jaws Wire cutter for with integrated cutting edges multiple stranded wire cables up to 10.00 mm2 very often also allow professional stripping of cables with demanding insulating materials like Teflon® and Radox® 왘 with wire cutter for copper and aluminium wires, multiple stranded up to 10 mm2 and single stranded up to 6 mm2 왘 smoothly operating mechanism Precise stripping from Opens automatically once 왘 easily interchangeable screw-on the stripping operation is 0.03 up to 10.0 mm2 style blades, length stop and completed cutting-clamping jaws 왘 body made of tough fibreglass 왘 reinforced plastic with  ergonomic soft compound zone 9 Stripping capacities on the handle area mm2 0.03-10.0 spare blades spare clamping jaws spare length stop

AWG

32-7

g 300

12 12 62 180

0.2 - 6.0 mm2

Precise stripping from 0.2 up to 6.0 mm2

Length mm

12 62 180 12 69 21



9 Abisolierwerte

Code 054573 060093

mm2 0.2-6.0 spare blades

1

1 2

2

Teflon® is a registered Trademark of E. I. du Pont de Nemours and Company Radox® is a registered Trademark of Huber & Suhner AG

Self-Adjusting Insulation Stripper

Article-No. 9 EAN-

The cutting edges at the steel clamping jaws (1) firmly restrain the insulated cable and avoid skidding. The stripping blades (2) cut to the correct depth and remove the insulation cleanly without any manual adjustment.

AWG 24-10

g 180

왘 compact standard tool at a favourable price for all current cable cross-sections and insulating materials 왘 for single, multiple and fine stranded cables of 0.2 up to 6.0 mm2 with standard insulation 왘 adjusts automatically to the respective cable cross-section, which prevents damage to the conductor 왘 high operation comfort thanks to handy shape and low weight 왘 narrow head style for use in confined areas 왘 with wire cutter for copper an aluminium wires up to 2.5 mm2 왘 with adjustable length stop from 6.0 - 18.0 mm for constant stripping length during repetitive work 왘 easily exchangeable blades 왘 body made of tough, fibreglass reinforced plastic with ergonomic soft plastic gripping zone in the handle

Wire cutter up to 2.5 mm2

Stripping in confined areas

21


12

12 Mini Stripping Tool 왘 for stripping thin copper conductors of 0.25 - 0.8 mm dia. 왘 precise stripping because of the tool’s stepwise adjustment to the conductor's diameter 왘 with wire cutter 왘 adjustable length stop from 4.0 - 15.0 mm

12 80 100 SB Article-No. 9 EANLength mm

9 Stripping capacities

왘 with locking device 왘 shock-resistant plastic body



Code 4003773-

12 80 100 SB 043119

ø mm 0.25 - 0.8

12

12 Wire Stripper

AWG 30 - 20

g 50

for Fibre Optics 왘 to remove primary and secondary coating of fibre optics 왘 burnished head, handles coated with soft plastic

Fibre optics primary coating secondary coating (Conductor insulation) KEVLAR® fibres

12 82 130 SB

Sheath

Article-No. 9 EANLength mm

9 Stripping capacities



Code 4003773-

12 82 130 SB 050094

ø mm primary coating 0.125, secondary coating 0.25

12

12 Stripping Tool

g 55

KEVLAR® is a registered Trademark of E. I. du Pont de Nemours and Company

for Fibre Optics 왘 to remove primary coating of fibre optics 0.125 mm dia. 왘 blade dia. 0.18 mm, hole for cable feeding 0.30 mm dia. 왘 adjustable length stop 왘 shock-resistant plastic body

12 85 100 SB

Article-No. 9 EANLength mm



Code 4003773-

12 85 100 SB 043126

22

9 Stripping capacities ø mm to remove primary coating of fibre optics 0.125 mm dia.

g 40

Removes precisely the primary coating from fibre optics


13

13 Electricians’ Pliers 왘 the ideal plier for cable work 왘 for gripping and bending wire 왘 for cutting soft, medium and hard wire 왘 precision cutting edges additionally induction hardened, cutting edge hardness approx. 60 HRC 왘 with precision stripping holes 왘 for crimping end sleeves (ferrules) 왘 high grade special tool steel, oil-hardened and tempered

13 01 160

Model 13 01 614: 왘 for AWG 10/12/14

13 02 160

Gripping

Article-No. 9 EANLength Code mm/Zoll 400377313 01 160 010210 13 01 614 040231 13 02 160 010470

9 Head

polished polished polished

Cutting

Stripping

9 Handles

9 Stripping capacities mm2 AWG 0.5-0.75/1.5/2.5 10/12/14 0.5-0.75/1.5/2.5

plastic coated plastic coated with two-colour dual component handles

13

Crimping

 g 110 110 150

13 Universal Plier for Data Cable, STP 왘 for cutting the whole cable, the single conductor, the shield and the plastic core 왘 steel point at the joint for longitudinal scratching of the shield foil 왘 prismatic blades below the joint for dismantling the cables 왘 special tool steel, oil-hardened

13 72 160 SB

Article-No. 9 EANLength mm

9 Head

9 Handles



Code 4003773-

13 72 160 SB 052319

burnished

with two-colour dual component handles

g 80

Smooth and clean dismantling of data cables

23


14

14 Diagonal Insulation Strippers 왘 the essential plier for electrical installation work 왘 precision stripping holes for single (solid) conductors of 1.5 and 2.5 mm2 왘 induction hardened precision blades for soft wire up to 4.0 mm dia., cutting edge hardness approx. 60 HRC 왘 Vanadium electric steel, oil-hardened and tempered

14 22 160

14 26 160 Article-No. 9 EANLength mm

9 Head

9 Handles

9 Stripping capacities

Code 4003773-

14 22 160

034988

polished

14 26 160

040279

chrome plated

with two-colour dual component handles insulated with two-colour dual component handles VDE-tested

15

15 Coated-Wire Stripping Tweezer

15 11 120

Article-No. 9 EANLength mm

15 11 120

9 Handles

plastic laminated handles

015550 021551 021568 021575 021582

15 Article-No. 9 EAN-

24

g 205

1.5 + 2.5

15 + 13

210 Multi-functional: cutting and stripping

왘 for stripping off varnished insulation on copper wires 왘 blades for other wire diameters available as spare parts 왘 tweezer body made of spring steel 

9 Style

ø mm 0.6 for wires: 0.5 0.6 0.8 1.0

g 35

Precisely milled blades for clean stripping

Dismantling and Cable Knives see pages 131 - 133

with opening spring 왘 for stripping thin wires 왘 accurate boring to match diameter of wire, precise stripping prism, non-adjustable 왘 with opening spring 왘 special tool steel, oil-hardened and tempered

15 61 160

15 51 160 15 61 160 15 81 160

AWG 15 +13

9 Stripping capacities

4003773-

15 Insulation Strippers

Length mm

mm2 1.5 + 2.5

Code

spare blades

15 19 005 006 008 010



9 Head

9 Handles

9 Stripping capacities



Code 4003773-

015567 014843 015574

polished polished polished

plastic coated plastic coated plastic coated

ø mm 0.5 0.6 0.8

g 110 110 110


16

16 Dismantling Tools

16 20 16 SB

16 20 165 SB

Article-No. 9 EANLength mm

16 20 16 SB 16 20 165 SB 16 20 28 SB 16 29 165

9 Handles

왘 for stripping all common round cables 왘 self-cocking holding lever 왘 with adjusting screw for cutting depth adaptation 왘 turnable blade for circular and longitudinal cutting 왘 spare blade inside the handle 왘 impact resistant plastic body made of wear-resistant polyamide 왘 secure grip due to soft component material on handle and holding lever to avoid slipping

9 Stripping capacities

Model 16 20 16 SB: 왘 for cables from 4.0 up to 16.0 mm dia. Model 16 20 165 SB 왘 with knife and hook blade inclusive protective cap 왘 for cables from 8.0 up to 28.0 mm dia. Model 16 20 28 SB: 왘 for cables from 8.0 up to 28.0 mm dia.



Code 4003773-

060451 043133 060468 043140

shock-resistant plastic body shock-resistant plastic body shock-resistant plastic body spare blade

16

ø mm 4.0 - 16.0 8.0 - 28.0 8.0 - 28.0

ø Inch ?/?? - ? ?/? 5/16 - 1 1/8 5/16 - 1 1/8

g 80 100 80

Self-turning drag blade for comfortable dismantling

16 Dismantling Tool

16 30 135 SB

Article-No. 9 EANLength mm

9 Handles

왘 for dismantling round PVC, rubber, silicone, PTFE cables from 6.0 - 29.0 mm dia. 왘 self-cocking holding lever 왘 with knurled nut for cutting depth adjustment 왘 changing from circular to longitudinal cutting by turning the tool body 왘 spiral cutting for longer stripping areas 왘 shock-resistant plastic body 왘 exchangeable blade 9 Stripping capacities



Code 4003773-

16 30 135 SB 026907 16 39 135 027317

shock-resistant plastic body spare blade

ø mm 6.0 - 29.0

ø Inch g 15/64 - 1 9/64 115

Adjustable cutting depth for precise dismantling

25


16

16 Dismantling Tool 왘 for dismantling round cables exceeding 25.0 mm dia. 왘 removes all kinds of insulation layers 왘 suitable for longitudinal and circular cutting 왘 cutting depth can be adjusted up to 5 mm 왘 replaceable blade (both sides can be used)

16 40 150

Article-No. 9 EANLength mm

16 40 150 16 49 150

9 Handles

9 Stripping capacities

왘 tool body made of fibreglass reinforced polyamide



Code 4003773-

026709 026716

fibreglass reinforced polyamide spare blade

ø mm ø Inch g for round cables over 25.0 1.0 210 Adjustable cutting depth

Setting the tool for longitudinal cut

16

Longitudinal cut

Turning the tool for circular cut

Circular cut

16 Coax-Stripping Tool

16 60 05 SB

Article-No. 9 EAN-

왘 for stripping Coax-cables (RG 58, RG 59 and RG 62) 왘 for stripping outer sheath, shield and dielectricum in one operating cycle 왘 with three built-in blades 왘 the cutting depth of each blade can be adjusted individually by means of a hexagonal Key (Allen Key) 왘 the blade spacing remains constant 왘 tool body made of plastic

9 Stripping capacities

Code 4003773-

16 60 05 SB 044888

26

Cabel RG 58, RG 59 and RG 62

Length mm 105

3 stripping steps in one operation

 g 65

Dismantling of a Coax-cable in three steps


16

16 Coax-Stripping Tool 왘 for dismantling and stripping all common Coax-cables between 4.8 - 7.5 mm dia. (e. g. for TV- and satellite antenna), also suitable for PVC round cable 3 x 0.75 mm2 왘 with linear scale 5.0 - 20.0 mm 왘 double shell, folding back stripping tool 왘 with opening spring and locking device 왘 tool body made of fibreglass reinforced polyamide

16 60 100 SB

Article-No. 9 EANLength mm

ø mm ø Inch 4.8 - 7.5 5/32 - 19/64 round cables 3 x 0.75 mm2

4003773-

16

16 Stripping Tool

Article-No. 9 EAN-

g 35

왘 for dismantling UTP + STP data cable between 5.0 and 15.0 mm dia. 왘 double shell, folding back stripping tool 왘 with opening spring and locking device 왘 practical clip for safe transport and fastening to the working clothes 왘 tool body made of fibreglass reinforced polyamide

for Data Cable

16 65 125 SB

Stripping the conductor of a Coax-cable



9 Stripping capacities

Code ø mm 5.0 - 15.0 UTP + STP

4003773-

16 65 125 SB 043157

16 16 80 125 SB

16 85 125 SB Article-No. 9 EAN-

ø Inch 13/64 - 19/32

g 65

왘 for dismantling and stripping all common round and damp-proof installation cables between 8.0 - 13.0 mm dia. (e. g. 3 x 1.5 mm2 up to 5 x 2.5 mm2) 왘 also for use in conduit and distribution boxes 왘 double shell, folding back stripping tool 왘 with opening spring and locking lever 왘 practical clip for safe transport and fastening to working clothes 왘 tool body made of fibreglass reinforced polyamide

16 Universal Stripping Tools

Length mm



9 Stripping capacities

Code

16 60 100 SB 040811

Length mm

Dismantling a Coax-cable 4.8 – 7.5 mm Ø

Stripping of UTP/STP data cables between 5.0 – 15.0 mm dia.

Model 16 85 125 SB: 왘 with additional blade for longitudinal cuts 왘 telescopic blade inside 왘 stripping device for cross-sections 0.2 - 0.3 - 0.8 1.5 - 2.5 - 4.0 mm2



9 Stripping capacities

Code 4003773-

16 80 125 SB 040828 16 85 125 SB 060444

Ø mm round cables 8.0 - 13.0 (3 x 1.5 mm2 up to 5 x 2.5 mm2)

Ø Inch 5/16 - 33/64

mm2

g 65

0.2/0.3/0.8/1.5/2.5/4.0

65

Stripping of round cables between 8.0 – 13.0 mm dia.

27


20

20 Flat Nose Pliers DIN ISO 5745

왘 short, flat jaws 왘 serrated gripping surfaces 왘 special tool steel, oil-hardened and tempered

20 01 160

20 02 160

20 05 160

20 06 160

Article-No. 9 EANLength mm

20 01 125 140 160 180 200 20 02 140 160 20 05 140 160 20 06 160

9 Head

9 Handles

Code 4003773-

014447 014454 015017 015666 015673 043386 035008 042464 042457 033783

polished

polished chrome plated chrome plated

plastic coated

with two-colour dual component handles with two-colour dual component handles insulated with two-colour dual component handles VDE-tested



9 Dimensions L3

W3

T1

mm

mm

mm

27.0 28.0 30.0 35.0 38.0 28.0 30.0 28.0 30.0 30.0

14.5 15.5 17.0 19.0 21.0 15.5 17.0 15.5 17.0 17.0

8.0 9.5 9.5 10.0 12.0 9.5 9.5 9.5 9.5 9.5

g 80 110 140 190 275 145 170 145 170 175

L3 T1 W3

29


22

22 Round Nose Pliers DIN ISO 5745

왘 for forming wire loops 왘 precision ground, short, round jaws 왘 smooth tips 왘 special tool steel, oil-hardened and tempered

22 01 160

22 02 160

22 05 160

22 06 160

Article-No. 9 EANLength mm

9 Handles

Code 4003773-

22 01 125 140 160 180 22 02 140 160 22 05 140 160 22 06 160

014461 013013 015024 015819 043430 023173 042891 042907 033790

22 07 160

015901

30

9 Head

polished

polished plated chrome plated chrome plated

plastic coated

with two-colour dual component handles dual component handles insulated with two-colour dual component handles VDE-tested plastic dipped insulated VDE-tested



9 Dimensions L3 mm 27.0 28.0 30.0 35.0 28.0 30.0 28.0 30.0 30.0

W3 mm 14.5 16.5 18.0 21.0 16.5 18.0 16.5 18.0 18.0

30.0

18.0

D1 2.0 2.5 3.0 3.5 2.5 3.0 2.5 3.0 3.0

T1 mm 8.0 9.5 9.5 10.5 9.5 9.5 9.5 9.5 9.5

3.0

9.5 205

ø mm

g 70 100 140 180 135 165 135 165 170

Ø D1

L3 T1 W3


19

19 Jewellers Pliers,

Round Nose Pliers 왘 for fine wire and jewellery work 왘 ideal for cutting and bending work, e.g. in electronics 왘 for forming wire loops 왘 precision ground round jaws with fine, pointed tips 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 60 HRC 왘 Vanadin steel, oil-hardened and tempered

19 01 130

Ø 1,0

2,0

32 8,0

Article-No. 9 EANLength mm

19 01 130 19 03 130

9 Head

g 70 70

4003773-

014478 014348

polished chrome plated

23

plastic coated plastic coated

with cutting edges, Precision Mechanics Plier 왘 suitable for gripping and cutting work in precision mechanics 왘 long, tapering jaws 왘 serrated gripping surfaces 왘 with cutting edges for soft wire 2.5 mm dia. and medium hard wire 1.6 mm dia. 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 60 HRC 왘 high grade special tool steel, oil-hardened and tempered

23 01 140

Article-No. 9 EAN-

23 01 140

13,5

Code

23 Flat Nose Plier

Length mm



9 Handles

9 Head

9 Handles



4,0

3,0

35 7,0 12,5

Code 4003773-

015918

polished

plastic coated

g 65

31


25

25 Chain Nose Side Cutting Pliers,

Radio Pliers

DIN ISO 5745

25 01 160

Style 0: straight jaws

왘 suitable for gripping and cutting work in precision mechanics 왘 pointed, half-round jaws 왘 serrated gripping surfaces 왘 with cutting edges for medium hard and hard wire 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 61 HRC 왘 high grade special tool steel, oil-hardened and tempered

25 02 160 Style 0: straight jaws

25 06 160 W4

T2

Style 0: straight jaws

L3 T1 W3

25 26 160 Style 2: 40° bent jaws Article-No. 9 EAN- 9 Style 9 Head Length Code mm 400377325 01 125 015932 140 013082 160 013099 25 02 140 023159 160 023166 25 03 125 015956 160 014492 25 05 140 035015 160 022817 25 06 160 033806

25 21 160 25 25 160

015994 016007

25 26 160

052111

polished

plastic coated

polished

with two-colour dual component handles plastic coated

0

chrome plated chrome plated chrome plated

2

polished chrome plated

chrome plated

40°

32

9 Handles

with two-colour dual component handles insulated with two-colour dual component handles VDE-tested plastic coated with two-colour dual component handles

insulated with two-colour dual component handles VDE-tested

9 Cutting capacities



9 Dimensions

mm 2.2 2.5 2.5 2.5 2.5 2.2 2.5 2.5 2.5 2.5

mm 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6

L3 mm 27.0 42.0 50.0 42.0 50.0 27.0 50.0 42.0 50.0 50.0

W3 mm 13.0 15.0 16.5 15.0 16.5 13.0 16.5 15.0 16.5 16.5

T1 mm 7.0 8.0 9.5 8.0 9.5 7.0 9.5 8.0 9.5 9.5

W4 mm 2.5 2.5 3.0 2.5 3.0 2.5 3.0 2.5 3.0 3.0

T2 mm g 1.8 70 2.0 90 2.5 115 2.0 110 2.5 145 1.8 70 2.5 115 2.0 110 2.5 145 2.5 150

2.5 2.5

1.6 1.6

50.0 50.0

16.5 9.5 16.5 9.5

3.0 3.0

2.5 2.5

115 145

2.5

1.6

50.0

16.5 9.5

3.0

2.5

150


26

26 Snipe Nose Side Cutting Pliers,

Stork Beak Pliers

DIN ISO 5745

26 12 200 Style 1: straight jaws

왘 high loadable, elastic precision points 왘 half-round, long jaws 왘 serrated gripping surfaces 왘 with cutting edges for medium hard wire max. dia. 3.2 mm and hard wire max. dia. 2.2 mm 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 61 HRC 왘 Vanadium steel, oil-hardened and tempered

KNIPEX Snipe Nose Side Cutting Pliers (Stork Beak Pliers) are forged from Vanadium steel and carefully hardened. The slim precision tips withstand high demands, particulary bending loads.

26 15 200 Style 1: straight jaws

High loadable elastic precision tips

26 22 200 3

2.5

Style 2: 40° bent jaws

23

73

9.5

26 26 200

17.5

Style 2: 40° bent jaws Article-No. 9 EANLength mm

9 Style

9 Head

9 Handles



Code 4003773-

26 11 200 26 12 200

013105 023142

26 13 200 26 15 200

016038 035022

chrome plated chrome plated

26 16 200

022831

chrome plated

26 17 200

016069

chrome plated

26 21 200 26 22 200

013112 023135

26 23 200 26 25 200

016076 035039

chrome plated chrome plated

26 26 200

022855

chrome plated

26 27 200

016090

1

2

40°

polished polished

polished polished

chrome plated

plastic coated with two-colour dual component handles plastic coated with two-colour dual component handles insulated with two-colour dual component handles VDE-tested plastic dipped insulated VDE-tested plastic coated with two-colour dual component handles plastic coated with two-colour dual component handles insulated with two-colour dual componentsleeves VDE-tested plastic dipped insulated VDE-tested

g 170 200 170 200 205

225 170 200 170 200 205

225

33


27

27 Telephone Plier

with center cutter 왘 grips and separates single wires in cable trees 왘 with center cutter for soft wire 왘 half-round jaws 왘 serrated gripping surfaces 왘 Chrome Vanadium electric steel, oil-hardened and tempered

27 01 160

2

3

47 9.5

Article-No. 9 EANLength mm

27 01 160

9 Head



9 Handles

16.5

Code g 120

4003773-

016106

polished

28

plastic coated

28 Assembly Pliers 왘 specially suitable for gripping adjusting and assembly work with a higher prehensile power 왘 serrated gripping surfaces 왘 special tool steel, oil-hardened and tempered

28 01 200 Style 0: 왘 flat, wide jaws

Style 0: flat, wide jaws

Style 2: 왘 half-round jaws

28 21 200 Style 2: half-round jaws T2

Article-No. 9 EAN- 9 Style 9 Head Length Code mm 400377328 01 200 013020

9 Handles

W4



9 Dimensions L3

W3

T1

W4

T2

mm

mm

mm

mm

mm

0

polished

plastic coated

33.0 13.5

10.5 4.0

g 10.5 200

plastic coated

33.0 13.5

10.5 4.0

10.5 200

2

chrome plated polished

plastic coated

34.0 13.5

10.5 3.0

3.0 190

L3 T1 W3

28 03 200

016144

28 21 200

028246

34


29

29 Telephone Pliers

without side cutter DIN ISO 5745

왘 gripping surfaces cross cut 왘 Chrome Vanadium electric steel, oil-hardened and tempered Style 1: 왘 flat, wide jaws

29 11 160

Style 2: 왘 half-round jaws 왘 extra slim, fine tips; also suitable for soldering work

Style 1: flat, wide jaws

29 25 160 Style 2: half-round jaws Article-No. 9 EAN- 9 Style 9 Head Length Code mm 400377329 11 160 016175

29 21 160

1

9 Handles



9 Dimensions L3

W3

T1

W4

T2

mm

mm

mm

mm

mm

polished

plastic coated

55.0 14.0

8.0

2.5

g 8.5 110

polished

plastic coated

54.0 14.0

9.0

2.0

2.0 120

chrome plated

with two-colour dual component handles

54.0 14.0

9.0

2.0

2.0 145

T2

W4

L3 T1

016199

W3

2 29 25 160

043478

31

31 Grab Pliers,

Needle Nose Pliers 왘 precision pliers for very exact assembly, bending and adjusting work 왘 with extra long jaws: length of jaws 55.0 mm 왘 smooth ground gripping surfaces 왘 edges carefully deburred 왘 Chrome Vanadium electric steel, oil-hardened and tempered

31 11 160 Style 1: straight jaws

Style 1: 왘 straight jaws Style 2: 왘 45° bent jaws

31 25 160 Style 2: 45° bent jaws

T2

Article-No. 9 EAN- 9 Style 9 Head Length Code mm 400377331 11 160 016441 31 15 160 016465

31 21 160 31 25 160

013075 016489

1

2 45°

polished chrome plated polished chrome plated

9 Handles

plastic coated with two-colour dual component handles plastic coated with two-colour dual component handles

W4



9 Dimensions L3

W3

T1

W4

T2

mm

mm

mm

mm

mm

55.0 15.0 7.5 55.0 15.0 7.5

2.0 2.0

g 2.5 100 2.5 120

55.0 15.0 7.5 55.0 15.0 7.5

2.0 2.0

2.5 100 2.5 120

L3 T1 W3

35


30

30 Long Nose Pliers,

without side cutter DIN ISO 5745

왘 heavy duty and wear resisting 왘 different jaw styles 왘 Chrome Vanadium electric steel, oil-hardened and tempered Style 1: 왘 long, trapezoidal jaws 왘 serrated gripping surfaces

30 11 160 Style 1: long, trapezoidal jaws serrated gripping surfaces

Style 2: 왘 long, half-round jaws 왘 serrated gripping surfaces

30 25 160 Style 2: long, half-round jaws serrated gripping surfaces

Style 3: 왘 long, round jaws 왘 smooth gripping surfaces

30 36 160 Style 3: long, round jaws smooth gripping surfaces Article-No. 9 EAN- 9 Style 9 Head Length Code mm 400377330 11 140 013037 160 013044 190 013051 30 13 140 016298 160 016304 30 15 140 042914 160 035046 190 001881 30 16 160 001904

30 21 140 160 190 30 23 140 30 25 140 160 190 30 31 140 160 30 33 140 160 30 35 140 160 30 36 160

36

016328 016335 016366 016373 001980 035060 043515 016397 013006 016427 016434 043102 035084 002123

1

2

3

polished

9 Handles

plastic coated

chrome plated chrome plated

plastic coated

chrome plated polished

insulated with two-colour dual component handles VDE-tested plastic coated

chr. plated chrome plated

plastic coated with two-colour dual component handles

polished

plastic coated

chrome plated chrome plated chrome plated

plastic coated

with two-colour dual component handles

with two-colour dual component handles insulated with two-colour dual component handles VDE-tested



9 Dimensions L3

W3

T1

W4

T2

mm

mm

mm

mm

mm

42.0 46.5 50.0 42.0 46.5 42.0 46.5 50.0 46.5

15.0 16.5 18.5 15.0 16.5 15.0 16.5 18.5 16.5

8.0 9.5 8.0 8.0 9.5 8.0 9.5 8.0 9.5

2.5 3.0 3.0 2.5 3.0 2.5 3.0 3.0 3.0

4.0 5.0 7.0 4.0 5.0 4.0 5.0 7.0 5.0

g 90 120 140 90 120 110 150 175 155

42.0 50.0 50.0 42.0 42.0 50.0 50.0 37.5 41.0 37.5 41.0 37.5 41.0 41.0

15.0 16.5 18.5 15.0 15.0 16.5 18.5 15.0 16.5 15.0 16.5 15.0 16.5 16.5

8.0 9.5 8.0 8.0 8.0 9.5 8.0 8.0 9.5 8.0 9.5 8.0 9.5 9.5

2.5 3.0 3.0 2.5 2.5 3.0 3.0 4.0 5.0 4.0 5.0 4.0 5.0 5.0

2.0 2.5 2.4 2.0 2.0 2.5 2.4 2.0 2.5 2.0 2.5 2.0 2.5 2.5

95 125 145 95 115 155 180 85 110 85 110 105 140 145

T2

W4

L3 T1 W3


32

32 Relay Adjusting Pliers DIN 5235

32 11 135 Style 1: flat, concave and pointed jaws

왘 for gripping components and wires of the smallest diameters and for bending contact and relay springs 왘 polished gripping surfaces 왘 edges carefully deburred 왘 Chrome Vanadium electric steel, oil-hardened and tempered Style 1: 왘 flat, concave and pointed jaws Style 2: 왘 flat, wide jaws

32 21 135

Style 3: 왘 40° bent, flat, concave and trapezoidal jaws

Style 2: flat, wide jaws

32 31 135 Style 3: 40° bent, flat, concave and trapezoidal jaws T2

Article-No. 9 EAN- 9 Style 9 Head Length Code mm 400377332 11 135 016496 32 13 135 016519 32 21 135 016533 32 23 135 016557 32 31 135 016588

1 2 3

9 Handles

polished plastic coated chrome plated polished plastic coated chrome plated polished plastic coated

W4



9 Dimensions L3

W3

T1

W4

T2

mm

mm

mm

mm

mm

34.0 34.0 34.0 34.0 32.0

12.5 12.5 12.5 12.5 12.5

7.0 7.0 7.0 7.0 7.0

1.4 1.4 1.4 1.4 1.4

1.5 1.5 3.5 3.5 3.5

L3 g 75 75 75 75 75

T1 W3

40°

33

33 Duckbill Pliers 왘 duckbill shaped jaws 9 mm wide at the tip and tapering to 1.5 mm thickness 왘 smooth gripping surfaces 왘 Chrome Vanadium electric steel, oil-hardened and tempered

33 01 160

T2

W4

L3

Article-No. 9 EANLength mm

33 01 160 33 03 160

9 Head

9 Handles

Code

L3

4003773-

016663 016670

polished chr. plated

plastic coated plastic coated



9 Dimensions W3

T1

W4

mm mm mm mm 55.0 15.0 7.5 3.0 55.0 15.0 7.5 3.0

T1 W3

T2

mm g 9.0 110 9.0 110

37


35

35 Electronics Pliers DIN ISO 9655 왘 precision pliers for ultra fine 왘 왘 왘 왘 왘

35 12 115

Style 1: flat, wide jaws

assembly work, e. g. in electronics and fine mechanics for gripping, holding and bending precision box joint smooth ground gripping surfaces edges carefully deburred low-friction double spring for gentle and even opening the polish or mirror polish (only finish 2) together with a fine film of oil offer the best possible rust protection - no circuit faults caused by peeling chrome from plated tools special tool steel, oil-hardened and tempered

In the design of KNIPEX Electronics Pliers for gripping and cutting ergonomic criteria have been given particular attention. The result is a comfortable and user friendly adaption of the plier to the human hand.

35 22 115 E

F

Style 2: half-round jaws B D A

35 42 115

35 52 145

Style 3: round, pointed jaws

Style 4: 45° bent, half-round jaws

Style 5: long, trapezoidal jaws

E

F

35 32 115

B D

35 62 145

35 72 145

35 82 145

Style 6: half-round, long jaws

Style 7: round, long jaws

Style 8: 45° bent, half-round, long jaws

Article-No. 9 EANLength mm

Code

9 Style

9 Head

all pliers with

016694 035107 016724 035114 016762 035121 040736

35 52 145

039389

35 62 145

039556

35 72 145

043607

35 82 145

039396

7

D

E

F

mm

mm

mm

9.5 9.5 9.5 9.5 9.5 9.5 9.5

6.5 6.5 6.5 6.5 6.5 6.5 6.5

2.0 2.0 2.0 2.0 2.0 2.0 2.0

4.0 4.0 1.5 1.5 1.0 1.0 1.5

g 60 75 55 70 50 60 75

long jaws

mirror polished

with two-colour dual component handles

40.0

12.0 7.5

1.5

4.0

105

long jaws

mirror polished

with two-colour dual component handles

40.0

12.0 7.5

2.5

1.5

95

long jaws

mirror polished

with two-colour dual component handles

40.0

12.0 7.5

2.5

1.3

90

long jaws

mirror polished

with two-colour dual component handles

35.0

12.0 7.5

2.5

1.0

95

33

6

A mm

22.5 22.5 22.5 22.5 22.5 22.5 22.5

22

5

B mm

plastic coated with two-colour dual component handles plastic coated with two-colour dual component handles plastic coated with two-colour dual component handles with two-colour dual component handles

11

4 4



9 Dimensions

polished mirror polished polished mirror polished polished mirror polished mirror polished

4003773-

35 11 115 35 12 115 35 21 115 35 22 115 35 31 115 35 32 115 35 42 115

45° 45

8 45°

38

9 Handles

A


35

35 Electronics Pliers ESD 왘 precision pliers for ultra fine assembly work, e. g. in electronics and fine mechanics 왘 for gripping, holding and bending 왘 electrically discharging version – dissipative 왘 precision box joint 왘 smooth ground gripping surfaces 왘 edges carefully deburred 왘 low-friction double spring - for gentle and even opening 왘 the polish together with a fine film of oil offer the best possible rust protection - no circuit faults caused by peeling chrome from plated tools 왘 with two-colour dual component handles black/grey 왘 special tool steel, oil-hardened and tempered

35 12 115 ESD Style 1: flat, flat wide jaws

35 22 115 ESD Style 2: half-round jaws

In the design of KNIPEX Electronics Pliers for gripping and cutting ergonomic criteria have been given particular attention. The result is a comfortable and user friendly adaption of the plier to the human hand.

ESD When using pliers on components endangered by electrostatic discharge (ESDS - electro static discharge sensitive devices) relevant regulations and standards (e. g. IEC TR 61 340-5, DIN EN 61 340-5, SP Method 2472) require a controlled discharge of electric energy through the handles of such pliers. The KNIPEX Electronics Pliers in ESD version discharge the electrostatic energy correspondingly slowly and controlled to protect endangered components.

35 32 115 ESD Style 3: round, pointed jaws

F

E

35 42 115 ESD

B

B D

Style 4: 45° bent, half-round jaws

Article-No.

9 EAN-

Length mm

35 12 115 ESD 35 22 115 ESD 35 32 115 ESD 35 42 115 ESD

E

F

Code

9 Style

9 Head

9 Handles

all pliers with

4003773-

024835 024842 024859 024866

11 2 3 2 4

45°

D A

A

mirror polished mirror polished mirror polished mirror polished

with two-colour dual component handles with two-colour dual component handles with two-colour dual component handles with two-colour dual component handles



9 Dimensions B

A

D

E

F

mm

mm

mm

mm

mm

22.5 22.5 22.5 22.5

9.5 9.5 9.5 9.5

6.5 6.5 6.5 6.5

2.0 2.0 2.0 2.0

4.0 1.5 1.0 1.5

g 75 70 60 75

39


36

36 Electronics Mounting Pliers

36 12 130

Model 36 12 130: to bend wire in shape for the distance to the plate

36 22 125

Model 36 22 125: to bend and cut wire at 1.6 mm length below the plate

왘 precision pliers for ultra fine assembly work, e. g. in electronics and fine mechanics 왘 for bending and cutting wire ends 왘 precision box joint 왘 smooth ground gripping surfaces 왘 edges carefully deburred 왘 low-friction double spring for gentle and even opening 왘 the mirror polish together with a fine film of oil offer the best possible rust protection - no circuit faults caused by peeling chrome from plated tools 왘 special tool steel, oil-hardened and tempered

W1

T2

Model 36 32 125: to crunch and cut wire at 1.6 mm length below the plate

36 32 125

L3 T1 W

T2

L3

Model 36 42 125: to cut wire at 1.3 mm length below the plate

36 42 125 SB

Article-No. 9 EANLength mm

9 Head

9 Handles

9 Style to

Code 4003773-

36 12 130 016861 36 22 125 046967 36 32 125 016885 36 42 125 SB 016892

mirror polished

with two-colour dual component handles

bend wire shape cut at 1.6 mm and bend wire cut at 1.6 mm and crunch wire cut wire, distance 1.3 mm

T1 W



9 Dimensions L3 mm 23.0 18.0 18.0 18.0

W mm 12.0 11.5 11.5 11.5

T1 mm 7.5 7.5 7.5 7.5

W1 mm 5.5 7.0 7.0 –

T2 mm 6.0 2.6 4.0 4.0

mm g – 80 1.2 90 1.0 90 1.2 100

41


37

37 Relay Adjusting Pliers

for precision mechanics DIN ISO 9655

37 11 125 Style 1: flat, wide jaws

왘 precision pliers for ultra fine assembly work, e. g. in electronics and fine mechanics 왘 for gripping, holding, bending and adjusting 왘 tips precision ground 왘 smooth gripping surfaces 왘 edges carefully deburred 왘 lap joint 왘 Chrome Vanadium electric steel, oil-hardened and tempered

37 21 125 Style 2: flat, concave and pointed jaws

37 31 125 Style 3: half-round jaws

37 41 125 Style 4: round, pointed jaws to bend wire loops

Article-No. 9 EAN- 9 Style 9 Head Length Code mm 400377337 11 125 014287 37 13 125 016922 37 21 125 014294 37 23 125 016946 37 31 125 014300 37 33 125 016960 37 41 125 014317 37 43 125 016977

42

1

2 3 4

polished chr. plated polished chr. plated polished chr. plated polished chr. plated

9 Handles

plastic coated plastic coated plastic coated plastic coated plastic coated plastic coated plastic coated plastic coated

F



9 Dimensions B

A

D

E

F

mm

mm

mm

mm

mm

27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0

12.5 12.5 12.5 12.5 12.5 12.5 14.5 14.5

7.0 7.0 7.0 7.0 7.0 7.0 8.0 8.0

2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0

5.5 5.5 2.0 2.0 1.6 1.6 1.0 1.0

g 70 70 75 75 65 65 75 75

E

B D A


38

38 Mechanics' Pliers DIN ISO 5745

왘 high bending strength of the plier jaws/tips 왘 Vanadium electric steel, oil-hardened and tempered

38 11 200 Style 1: straight, half-round jaws

38 15 200

Style 1: straight, half-round jaws

38 71 200 Angled jaws for easy access to confined areas

Style 7: 70° bent, half-round jaws, suitable for pulling split pins. For gripping tasks in confined areas

38 21 200 Style 2: 40° bent, half-round jaws

38 31 200

38 41 190

38 91 200

Style 3: cranked, half-round jaws

Style 4: flat, wide jaws

Style 9: 45° bent, half-round, long jaws, also suitable for gripping spark plugs and round components (spark plug cover "grabber")

Article-No. 9 EAN- 9 Style 9 Head Length Code mm 400377338 11 200 016991 38 13 200 017035 38 15 200 039594

1

38 21 200 38 25 200

017066 043669

2

38 31 200 38 35 200

017110 017134

3

38 41 190 017141 38 45 190 043676

4

38 71 200

7

40°

017202

9 Handles

polished chr. plated chrome plated polished chrome plated polished chrome plated polished chrome plated polished

plastic coated plastic coated with two-colour dual component handles plastic coated with two-colour dual component handles plastic coated with two-colour dual component handles plastic coated with two-colour dual component handles plastic coated

polished chrome plated

plastic coated with two-colour dual component handles

Especially shaped jaws for easy gripping of spark plugs



9 Dimensions L3

W3

T1

W4

T2

mm

mm

mm

mm

mm

73.0 17.5 9.5 73.0 17.5 9.5 73.0 17.5 9.5

3.0 3.0 3.0

g 2.5 180 2.5 180 2.5 210

73.0 17.5 9.5 73.0 17.5 9.5

3.0 3.0

2.5 175 2.5 205

73.0 17.5 9.5 73.0 17.5 9.5

3.0 3.0

2.5 175 2.5 205

50.0 18.0 8.0 50.0 18.0 8.0

2.0 2.0

8.0 140 8.0 175

73.0 17.5 9.5

3.0

2.0 175

73.0 17.5 9.5 73.0 17.5 9.5

– –

2.5 180 2.5 210

T2

W4

L3 T1 W3

70°

38 91 200 38 95 200

017219 017233

9 45°

43


40

40 Universal Grip Pliers 왘 holds round, section and flat material securely 왘 heavy duty model 왘 with adjustment screw and release lever 왘 one-hand operation 왘 high clamping pressure due to toggle lever action

왘 plier body: high strength special grade steel 왘 inserted jaws made from Chrome Vanadium steel, drop forged

40 04 250 Article-No. 9 EANLength mm

40 04 180 250

9 Head

9 Handles



9 Clamping width

Code 4003773-

022190 002710

nickel plated nickel plated

nickel plated nickel plated

41

mm

mm

mm

8 - 35 8 - 35

25 30

6 - 26 8 - 30

g 325 530

41 Grip Pliers

왘 holds round, section and flat material securely 왘 heavy duty model 왘 with adjustment screw and release lever 왘 one-hand operation 왘 high clamping pressure due to toogle lever action

왘 plier body: high strength special grade steel 왘 inserted jaws made from Chrome Vanadium steel, drop forged

41 04 250 Style 0: jaws for round workpieces, with wire cutter

41 14 250 Style 1: jaws with double prism for round, section and flat material

Example 41 14 250

41 24 225

41 34 165

Style 2: straight jaws for flat material

Style 3: Long-Nose Grip Plier, narrow, long jaws

Article-No. 9 EANLength mm

41 04 180 250 300 41 14 250 41 24 225 41 34 165 44

9 Style

9 Head

9 Handles



9 Clamping width

Code 4003773-

002741 002758 022183 023470 023487 047858

mm

0

nickel plated

nickel plated

1 2 3

nickel plated nickel plated nickel plated

nickel plated nickel plated nickel plated

8 - 30 8 - 40 10 - 65 36 42 6.5 - 30

mm

20 20 30 36 16 10

mm

6 - 24 8 - 30 10 - 34 13 - 36 0 - 24 6 - 24

g 360 530 930 560 505 200


42

42 Welding Grip Pliers 왘 for gripping and clamping round, section and flat material 왘 heavy duty model 왘 with adjustment screw and release lever

왘 one-hand operation 왘 high clamping pressure due to toogle lever action 왘 plier body: high strength spring steel

Model 42 14 280: 왘 heat resistant crucible cast steel jaws 왘 section or flat material items lying side by side are held securely during welding 왘 also for section material with vertical webs up to 25 mm height

42 14 280 0-25 mm

Secure fixing of metal section material for welding

Model 42 24 280: 왘 heat resistant crucible cast steel jaws 왘 round or tubular material items lying centrally side by side are held securely during welding

42 24 280

Model 42 34 280: 왘 gripping jaws of Chrome Vanadium steel, drop forged 왘 clamps cumbersome workpieces and sections with high webs up to 40 mm

42 34 280 0-40 mm

Article-No. 9 EANLength mm

42 14 280 42 24 280 42 34 280

9 Head

9 Handles

9 Clamping width



Code 4003773-

022206 022213 022220

nickel plated nickel plated nickel plated

nickel plated nickel plated nickel plated

mm

mm

30 - 65 10 - 85 -

51 90

g 915 860 700

45


45

45 Special Retaining Ring Pliers

(shafts) 왘 for fitting horseshoe-shaped spring retaining rings and circlips without grip holes 왘 for shaft retaining devices 왘 with opening spring 왘 forged 왘 Chrome Vanadium steel, oil-hardened and tempered

Model 45 10 170: 왘 for retaining rings with a minimum ring split gap of 3.6 mm

45 10 170 3.6 mm

Model 45 21 200: 왘 angled jaws with centering hole 왘 for retaining rings according to standard from 12.0 mm dia., e. g. for securing drive shaft in the gearbox of a motor vehicle 왘 minimum ring split gap of the rings 2.2 mm

45 21 200 2.2 mm

Article-No. 9 EANLength mm

45 10 170 45 21 200

9 Style

9 Head



9 Handles

Code g 155 190

4003773-

017370 031208

burnished burnished

46

46 External Circlip Pliers

burnished plastic coated

45 21 200: Tips with center holes for secure fit of the retaining ring

for fitting Grip Rings (shafts) 왘 for fitting grip rings on shafts from 1.5 - 30 mm dia. 왘 with opening spring 왘 solid style, forged 왘 non-slip, solid tips 왘 Chrome Vanadium electric steel, oil-hardened and tempered

46 11 G0

Model 46 11 G0: 왘 for rings of 1.5 - 4.0 mm dia., with adjustable stop screw to prevent overstretching

46 11 G2

Article-No. 9 EANSize

9 Style

9 Head

9 Handles

Code 4003773-

46 11 G0 G1 G2 G3 G4

9 Size of shaft

047896 031062 031079 031086 031093

polished

plastic coated

mm 1.5 4 5 14 20 -

4 7 13 18 30

 Length mm g 140 80 140 80 140 80 140 80 180 140

47


44

44 Internal Circlip Pliers

(bore holes)

DIN 5256 C (straight) DIN 5256 D (bent)

왘 for fitting internal circlips in bore holes from 8 - 400 mm dia. 왘 solid style, forged 왘 non-slip, solid tips 왘 Chrome Vanadium electric steel, oil-hardened and tempered

44 11 J2 Style 1: straight tips

Easy fitting of internal circlips

44 21 J21 Style 2: bent tips

Models 44 10 and 44 20: 왘 for rings from 122 - 400 mm dia. 왘 with locking device, can be released 왘 with replaceable tips made of tempered steel 왘 black powder coated

44 10 J6

Article-No. 9 EAN- 9 Style Size

9 Head

9 Handles

4003773-

44 11 J0 J1 J2 J3 J4 44 10 J5 J6 44 19 J5 J6 44 13 J0 J1 J2 J3 J4 44 21 J01 J11 J21 J31 J41 44 20 J51 J61 44 29 J51 J61 44 23 J01 J11 J21 J31 J41 48

017240 013570 013587 013594 013600 024910 024927 024934 024941 017264 017271 017288 017295 017301 017318 013617 013624 013631 013648 024958 024965 024972 024989 017325 017332 017349 017356 017363

1

polished

plastic coated

black powder coated

straight

2

spare tips spare tips chrome plated

polished

plastic-coated

plastic coated

black powder coated spare tips spare tips chrome plated

plastic coated



9 Size of bore

Code mm 8 - 13 12 - 25 19 - 60 40 - 100 85 - 140 122 - 300 252 - 400

Length mm g 140 90 140 90 180 140 225 200 320 465 570 1710 580 1730

8 12 19 40 85 8 12 19 40 85 122 252

- 13 - 25 - 60 - 100 - 140 - 13 - 25 - 60 - 100 - 140 - 300 - 400

140 140 180 225 320 130 130 170 215 300 590 600

90 90 140 200 465 90 90 140 205 480 1980 1990

8 12 19 40 85

- 13 - 25 - 60 - 100 - 140

130 130 170 215 300

90 90 140 205 480

!

Loosen tight circlips before removing these.

Only use circlip pliers for the specified diameter range. We recommend wearing safety goggles when working with these pliers.


46

46 External Circlip Pliers (shafts) DIN 5254 A (straight) DIN 5254 B (bent)

왘 for fitting external circlips on shafts from 3 - 400 mm dia. 왘 solid style, forged 왘 non-slip, solid tips 왘 Chrome Vanadium electricsteel, oil-hardened and tempered

46 11 A2 Style 1: straight tips Easy fitting of external circlips

46 21 A21 Style 2: bent tips Models 46 10 and 46 20: 왘 for rings from 122 - 400 mm dia. 왘 with locking device, can be released 왘 without opening spring 왘 with replaceable tips made of tempered steel 왘 black powder coated

46 10 A5 Article-No. 9 EAN- 9 Style Size

9 Head

9 Handles

4003773-

46 11 A0 A1 A2 A3 A4 46 10 A5 A6 46 19 A5 A6 46 13 A0 A1 A2 A3 A4 46 21 A01 A11 A21 A31 A41 46 20 A51 A61 46 29 A51 A61 46 23 A01 A11 A21 A31 A41

013655 013662 013679 013686 013693 024996 025009 024316 025016 017417 017424 017431 017455 017462 013709 013716 013723 013730 013747 025023 025030 025047 025054 017509 017516 017523 017530 017479

1

polished

plastic coated

black powder coated

straight

2

spare tips spare tips chrome plated

polished

plastic coated

plastic coated

black powder coated spare tips spare tips chrome plated

plastic coated



9 Size of shaft

Code ø mm 3 - 10 10 - 25 19 - 60 40 - 100 85 - 140 122 - 300 252 - 400

Length mm g 140 85 140 85 180 140 210 215 320 530 560 2020 570 2030

3 10 19 40 85 3 10 19 40 85 122 252

- 10 - 25 - 60 - 100 - 140 - 10 - 25 - 60 - 100 - 140 - 300 - 400

140 140 180 210 320 125 125 170 200 300 570 580

85 85 140 215 530 85 85 135 215 515 1810 1820

3 10 19 40 85

- 10 - 25 - 60 - 100 - 140

125 125 170 200 300

85 85 135 215 515

!

Loosen tight circlips before removing these.

Only use circlip pliers for the specified diameter range. We recommend wearing safety goggles when working with these pliers.

49


48

48 Precision Internal Circlip Pliers

(bore holes)

DIN 5256 C (straight) DIN 5256 D (bent)

48 11 J2 Style 1: straight tips

48 21 J21 Style 2: bent tips

Sturdy, inserted tips: made from high density drawn spring wire

Article-No. 9 EAN- 9 Style Size

Circlips are held securely: large contact faces and the position of the tips make it difficult for the circlip to bounce off

9 Head

9 Handles

왘 for fitting circlips on bore holes, range of application from 8 - 140 mm dia. 왘 inserted tips of high density drawn spring wire 왘 heavy duty under continuous use; up to 10 times longer service life 왘 precise, smoothly-operating screw joint 왘 forged 왘 large contact faces on the tips: no distortion of circlips, easy fitting 왘 slim head style allows use in confined areas 왘 handles with non-slip plastic coating 왘 Chrome Vanadium electric steel

Slim head style: allows use in confined areas

9 Size of bore

Code

Screw joint: high precision and optimum drive

 Length

ø mm 8 - 13

mm 140

g 100

048527

12 - 25

140

100

J2

048534

19 - 60

180

180

J3

048541

40 - 100

225

260

J4

048558

straight

85 - 140

320

580

48 21 J01

048619

2

8 - 13

130

100

J11

048633

12 - 25

130

100

J21

048640

19 - 60

165

180

J31

048657

40 - 100

210

260

J41

048664

85 - 140

305

580

4003773-

48 11 J0

048510

J1

50

1

grey atramentized

grey atramentized

with non-slip plastic coating

with non-slip plastic coating

The new KNIPEX Precision Circlip Pliers meet highest requirements. Positive locked high density spring wire tips offer 10 times longer sevice life compared with conventional circlip pliers and high stability when loosening tight circlips. Circlips are held securely thanks to the large contact faces of the tips.

!

Loosen tight circlips before removing these.

Only use circlip pliers for the specified diameter range. We recommend wearing safety goggles when working with these pliers.


49

49 Precision External Circlip Pliers

DIN 5254 A (straight) DIN 5254 B (bent)

49 11 A2 Style 1: straight tips

49 21 A21 Style 2: bent tips

Spring inside the joint: the spring is protected inside the precision screw joint. It does not hinder work and can’t get dirty or lost

Article-No. 9 EAN- 9 Style Size

(shafts)

KNIPEX Precision Circlip Pliers: fit circlips without distortion; easy and quick assembling

9 Head

9 Handles

왘 for fitting circlips on shafts, range of application from 3 - 140 mm dia. 왘 inserted tips of high density drawn spring wire 왘 heavy duty under continuous use; up to 10 times longer service life 왘 precise, smoothly-operating screw joint 왘 forged 왘 large contact faces on the tips: no distortion of circlips, easy fitting 왘 slim head style allows use in confined areas 왘 protected captive spring in the joint 왘 handles with non-slip plastic coating 왘 Chrome Vanadium electric steel

Conventional Circlip Pliers: distortion of the circlip when being fitted is possible

4003773-

ø mm 3 - 10

Length mm g 140 100

49 11 A0

048718

A1

048725

10 - 25

140

100

A2

048732

19 - 60

180

180

A3

048749

40 - 100

225

260

A4

048756

85 - 140

320

595

3 - 10

130

100

048824

10 - 25

130

100

A21 048831

19 - 60

165

180

A31 048848

40 - 100

210

260

A41 048855

85 - 140

305

595

49 21 A01 048817 A11

1

grey atramentized

with non-slip plastic coating

straight

2

grey atramentized

with non-slip plastic coating

Heavy duty tips: optimum stability when loosening tight circlips



9 Size of shaft

Code

The new KNIPEX Precision Circlip Pliers meet highest requirements. Positive locked high density spring wire tips offer 10 times longer sevice life compared with conventional circlip pliers and high stability when loosening tight circlips. Circlips are held securely thanks to the large contact faces of the tips. The large contact areas as well as the position of the tips ensure fitting without distorsion and make it difficult for the circlip to bounce off. The opening spring is protected inside the screw joint.

!

Loosen tight circlips before removing these.

Only use circlip pliers for the specified diameter range. We recommend wearing safety goggles when working with these pliers.

51


50

50 Carpenters' Pincers DIN ISO 9243

왘 for heaviest duty 왘 specially favoured by craftsmen due to precision workmanship 왘 extreme wear resistance and good balance 왘 special tool steel, oil-hardened and tempered

50 00 210

50 01 225 Bestell-Nr. 9 EANArticle-No. Length Länge mm

50 00 130 160 180 210 225 250 300 50 01 130 160 180 210 225 250 300

Kopf 9 Head



Griffe 9 Handles

Code 4003773-

014423 013129 013136 013143 013150 013167 015710 015789 015802 016021 016052 016083 016267 016915

poliert polished

black schwarz atramentized atramentiert

poliert polished

plastic mit Kunststoff coated überzogen

51

51 Carpenters' Pincer

g 125 210 310 400 420 580 880 140 225 325 415 435 600 900

with striking face DIN ISO 9243

왘 with striking face for driving in nails 왘 special tool steel, oil-hardened and tempered

51 01 210 Bestell-Nr. 9 EANArticle-No. Length Länge mm

51 01 210

52

Kopf 9 Head

Griffe 9 Handles



Code 4003773-

014065

poliert polished

plastic mit Kunststoff coated überzogen

g 425

Multi-functional: driving in and pulling nails


55

55 Farriers' Pincer,

Hamburg pattern DIN 5173

왘 the ideal plier for the farrier 왘 with small head and reversing groove 왘 also suitable for dismantling work in vehicle body workshops

왘 cutting edge hardness approx. 55 HRC 왘 special tool steel, oil-hardened and tempered

55 00 300 Article-No. 9 EANLength mm

55 00 300

9 Head

9 Handles

9 Head width



Code 4003773-

014072

polished

black atramentized

56

56 Farriers' Pincer,

mm 20

g 785

Vienna pattern 왘 with wide head 왘 cutting edge hardness approx. 55 HRC 왘 special tool steel, oil-hardened and tempered

Model 55 00 300 Dismantling work in car body construction

56 00 325 Article-No. 9 EANLength mm

56 00 325

9 Head

9 Handles

9 Head width

4003773-

017592

polished

black atramentized

57

57 Unsoling Pincer

mm 33

Article-No. 9 EAN-

57 00 360

9 Head

g 1020

for horse shoeing 왘 for the farrier 왘 also suitable for dismantling work in vehicle body workshops 왘 also for dismantling work on timber and metal 왘 special tool steel, oil-hardened and tempered

57 00 360

Length mm



Code

9 Handles

9 Head width



Code 4003773-

017622

polished

58

black atramentized

58 Potters' Pincers,

mm 30.5

g 1160

Brick Pincers 왘 for pottery work 왘 with wire cutter for soft wire 왘 special tool steel, oil-hardened and tempered

Model 58 10 225: 왘 head width 10 mm Model 58 30 225: 왘 head width 20 mm

58 10 225 Article-No. 9 EANLength mm

58 10 225 58 30 225

9 Head

9 Handles

9 Head width



Code 4003773-

017646 014331

polished polished

black atramentized black atramentized

mm 10 20

g 345 350

53


99

99 Concretors' Nippers,

Tower Pincers / Steel Fixers Nippers DIN ISO 9242

99 00 280

왘 to twist and cut wire in one operation: fast, reliable and economical 왘 unobtained precision and long service life make these the most widely purchased concretors' nippers in the world 왘 special tool steel, oil-hardened and tempered

Model 99 00 220 K12: 왘 with 12 mm head, particularly suitable for tile paving work

99 01 220 Article-No.

9 EAN-

Length mm

9 Head



9 Handles

Code g 235 320 400 405 510 250 340 425 485 555 320

4003773-

99 00 200 220 250 280 300 99 01 200 220 250 280 300 99 00 220 K12

014393 013273 013280 014096 014409 021452 021469 021483 021490 014416 027812

polished

black atramentized

polished

plastic coated

polished

black atramentized

99

99 High Leverage Concretors' Nippers, DIN ISO 9242

99 14 300

99 10 300

high lever transmission

왘 to twist and cut thicker wire in one operation: fast, reliable and economical 왘 very slim shape for tying submerged positioned steel rods 왘 cutting capacity: binding wire up to max. 4.5 mm dia. 왘 particularly high cutting capacity with minimum effort due to optimum transmission ratio 왘 high damping of the cutting stroke after cutting the binding wire, which reduces strain on tendons and muscles 왘 special tool steel, oil-hardened and tempered

KNIPEX High Leverage Concretors' Nippers offer substantially higher cutting performance as well as a damping of the cutting stroke after cutting the binding wire - two valuable ergonomical advantages for the user.

Requires 27% less effort. Cutting a binding wire of 3.0 mm dia. with a High Leverage Concretors' Nipper requires handforce of only 300 N (30.0 kp) instead of 412 N (41.2 kp) with a common Concretors' Nipper of the same length.

99 11 300 Article-No. 9 EANLength mm

99 10 300 99 11 300 99 14 300

9 Head

9 Head width

9 Handles

9 Capacitiy



Code 4003773-

022398 023210 028116

mm polished 25 polished 25 nickel plated 25

black atramentized plastic coated nickel plated

ø mm 4.5 4.5 4.5

g 475 510 475

Quick and comfortable twisting and cutting of binding wire

55


61

61 Bolt End Cutting Nipper 왘 better handling, greater capacity and lower handforce required compared to conventional bolt end cutting nippers 왘 with cutting edges for soft, hard and piano wire 왘 particularly high cutting capacity with minimum effort due to optimum transmission ratio 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC 왘 forged 왘 Vanadium electric steel, oil-hardened and tempered

61 01 200

KNIPEX Bolt End Cutting Nippers are clearly lighter in weight and more comfortable in use than conventional Bolt End Cutting Nippers — nevertheless they offer a higher cutting performance.

Four advantages compared with conventional Lever Action End Cutting Nippers of the same size

왘 high cutting performance: e.g. piano wire up to 3.0 mm dia. Particularly efficient for fence construction

Flush cutting of bolts, nails, etc.

Article-No. 9 EAN- 9 Head

9 Handles

Length Code mm 400377361 01 200 026723 polished

9 Cutting capacities



ø mm ø mm ø mm ø mm g 1.0-6.0 4.0 3.5 3.0 max. 460

plastic coated

62

왘 easier cutting: thanks to high leverage

High cutting performance: also for piano wire

왘 handy: compact design, reduced weight 왘 smooth operation, less friction: single joint instead of toggle lever technique

62 Electronics Oblique Cutting Nipper DIN ISO 9654

62 12 120

Article-No. 9 EAN- 9 Style 9 Head Länge Code mm 400377362 12 120 048008

9 Handles

왘 with cutting edges for soft and medium hard wire 왘 without bevel, for flush cutting 왘 cutting edge hardness approx. 58 HRC 왘 low-friction double spring for gentle and even opening 왘 precision box joint 왘 the polish together with a fine film of oil offer the best possible rust protection - no circuit faults caused by peeling chrome from plated tools 9 Cutting capacities

왘 special tool steel, oil-hardened and tempered

17 15°

11 10

 7.5

polished

with two-colour dual component handles

ø mm 0.3-1.0

ø mm 0.7

g 90

57


64

C

A

64 Electronics End Cutting Nippers DIN ISO 9654

64 01 115 Style 0: End Cutter, with bevel

64 02 115 Style 0: End Cutter, with bevel

64 12 115

64 52 115

Style 1: End Cutter, with small bevel

Style 5: Oblique End Cutter, short head, without bevel, for flush cutting, α = 27°

왘 precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics 왘 precision box joint 왘 low-friction double spring for gentle and even opening 왘 the polish or mirror polish (only finish 2) together with a fine film of oil offer the best possible rust protection - no circuit faults caused by peeling chrome from plated tools 왘 cutting edge hardness at least 56 HRC 왘 special tool steel, oil-hardened and tempered

B D

64 12 115 C B D

A

64 22 115 A

C

B

64 22 115 64 22 115

64 62 120

Style 2: End Cutter, mini-blade with small bevel

Style 6: Oblique End Cutter, mini-blade with small bevel, α = 65°

D

64 62 120

differently shaped jaws and miniblades for flush cutting in confined areas

C

64 32/42/52 115 C

64 32 120

64 72 120

Style 3: Oblique End Cutter, short head, with small bevel, α = 15°

Style 7: Oblique End Cutter, mini-blade with small bevel, head with recess, α = 35°

B

B D

A

D A

64 42 115 Style 4: Oblique End Cutter, short head, with small bevel, α = 27° Article-No. 9 EAN- 9 Style Length Code all pliers with mm 400377364 01 115 017745 0 64 02 115 035343

64 11 115 64 12 115 64 22 115 64 32 120 64 42 115 64 52 115 64 62 120 64 72 120 58

017769 040743 017806 017820 017844 040439 046998 017882

1 2 3 4 5 6 7

64 72 120 9 Head

polished mirror polished polished mirror polished

64 72 120

9 Handles

plastic coated with two-colour dual component handles plastic coated with two-colour dual component handles

64 62 120 9 Dimensions B A

9 Cutting capacities  D

C

mm 6.0 6.0

mm 11.0 11.0

mm 7.5 7.5

mm 16.0 16.0

ø mm 2.0 2.0

ø mm 1.0 1.0

ø mm g 0.6 80 0.6 90

6.0 6.0 20.0 10.0 10.3 10.0 18.5 19.5

11.0 11.0 10.0 11.0 10.0 10.0 9.5 12.0

7.0 7.0 6.0 7.0 7.0 7.0 6.0 7.0

16.0 16.0 3.0 17.0 12.0 12.0 5.0 5.0

1.4 2.0 0.8 1.5 1.5 1.3 0.6 1.5

0.8 0.8 1.0 1.0 -

0.5 0.5 0.5 -

80 90 70 90 70 70 70 90


64

64 Electronics End Cutting Nippers ESD DIN ISO 9654

64 12 115 ESD Style 1: End Cutter, with small bevel

64 32 120 ESD

64 62 120 ESD

Style 3: Oblique End Cutter, with small bevel, α = 15°

Style 6: Oblique End Cutter, mini-blade with small bevel, α = 65°

Article-No.

9 Head

Length mm

9 EAN- 9 Style Code

9 Handles

9 Dimensions B A

all pliers with

mm 6.0 10.0 18.5

4003773-

64 12 115 ESD 024323 1 64 32 120 ESD 025078 3 64 62 120 ESD 025085 6

mirror polished

67

ESD

왘 precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics 왘 electrically discharging version - dissipative 왘 precision box joint 왘 low-friction double spring for gentle and even opening 왘 the mirror polish together with a fine film of oil offer the best possible rust protection - no circuit faults caused by peeling chrome from plated tools 왘 cutting edge hardness at least 56 HRC 왘 with two-colour dual component handles, black/grey 왘 special tool steel, oil-hardened and tempered

with two-colour dual component handles

mm 11.0 11.0 9.5

When using pliers on components endangered by electrostatic discharge (ESDS - electro static discharge sensitive devices) relevant regulations and standards (e. g. IEC TR 61 340-5, DIN EN 61 340-5, SP Method 2472) require a controlled discharge of electric energy through the handles of such pliers. The KNIPEX Electronics Pliers in ESD version discharge the electrostatic energy correspondingly slowly and under control to protect endangered components.

9 Cutting capacities  D

C

mm 7.0 7.0 6.0

mm 16.0 17.0 5.0

ø mm 2.0 1.5 0.6

ø mm 0.8 1.0 -

ø mm 0.5 0.5 -

g 90 90 70

67 High Leverage End Cutting Nippers DIN ISO 5748

67 01 200

왘 with cutting edges for soft, hard and piano wire 왘 high cutting capacity with little effort due to optimum coordination of cutting edge angle and transmission ratio 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC 왘 Chrome Vanadium electric steel, oil-hardened and tempered

67 05 200 Article-No. 9 EANLength Code mm 400377367 01 140 013761 160 013778 200 013785 67 05 140 017929 160 017936 200 017943

9 Head

9 Handles

polished

plastic coated

chrome plated

with two-colour dual component handles



9 Cutting capacities ø mm 4.0 4.0 4.0 4.0 4.0 4.0

ø mm 3.1 3.4 4.2 3.1 3.4 4.2

ø mm 2.0 2.5 3.0 2.0 2.5 3.0

ø mm 1.5 2.0 2.5 1.5 2.0 2.5

Induction hardened precision blades also suitable for piano wire

g 145 240 330 180 275 375

59


68

68 End Cutting Nippers DIN ISO 5748

68 01 200

Article-No. 9 EANLength Code mm 400377368 01 160 013792 180 013808 200 013815

9 Head

polished

9 Handles

plastic coated

69

왘 with cutting edges for soft and hard wire 왘 also suitable for twisting and cutting binding wire 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 61 HRC 왘 high grade special tool steel, oil-hardened and tempered

9 Cutting capacities



ø mm ø mm ø mm 4.0 2.8 2.3 4.0 3.2 2.5 4.0 3.5 2.8

g 195 275 335

Also suitable for wire netting in reinforced concrete construction

69 Mechanics End Cutting Nippers DIN ISO 5748

69 01 130

왘 with cutting edges for soft, hard and piano wire; also suitable for thin copper wires 왘 lap joint 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC 왘 Chrome Vanadium electric steel, oil-hardened and tempered

20

Article-No. 9 EAN-

9 Head

polished

69 03 130

chrome plated

60

7.5



9 Cutting capacities

10

Length Code mm 400377369 01 130 017974 018001

9 Handles

plastic coated

ø mm ø mm ø mm ø mm 0.4-2.0 1.3 1.0 0.75

g 115

plastic coated

0.4-2.0 1.3

115

1.0

0.75

16


70

70 Diagonal Cutters DIN ISO 5749

70 01 160

70 02 160

왘 the indispensable diagonal cutter for all-round use 왘 high quality material and precise workmanship for long service life 왘 precision cutting edges for soft and hard wire 왘 clean cutting at cutting edge tips; also in case of thin copper wires 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 62 HRC 왘 narrow head style for use in confined areas 왘 Vanadium electric steel, oil-hardened and tempered

The cutting edges of KNIPEX Diagonal Cutters – made of Vanadium steel – have a long service life, are machined highly precise and are very sharp – for a clean cut of soft and hard wires.

Style 0: 왘 with bevel Style 1: 왘 with bevel 왘 with opening spring

70 05 160

Style 2: 왘 with small bevel

70 06 160

Article-No. 9 EAN- 9 Style 9 Head Length Code mm 400377370 01 110 014324 125 013402 140 013419 160 013426 180 018070 70 02 125 034025 140 023098 160 034032 180 034049 70 04 140 018100 70 05 125 039501 140 039488 160 039600 180 043706 70 06 125 018124 140 040293 160 021995 180 033813 70 07 160 018155 180 018179 70 11 110 018193 70 15 110 029649

70 26 160

018223

0

1

2

9 Handles

polished

plastic coated

polished

with two-colour dual component handles

chr. plated chrome plated

chrome plated with two-colour dual component handles

chrome plated

insulated with two-colour dual component handles

chrome plated polished chrome plated chrome plated

VDE-tested plastic dipped insulated VDE-tested plastic coated with two-colour dual component handles insulated with two-colour dual component handles

9 Cutting capacities



ø mm ø mm ø mm 3.0 2.0 1.2 3.0 2.3 1.5 4.0 2.5 1.8 4.0 2.8 2.0 4.0 3.0 2.5 3.0 2.3 1.5 4.0 2.5 1.8 4.0 2.8 2.0 4.0 3.0 2.5 4.0 2.5 1.8 3.0 2.3 1.5 4.0 2.5 1.8 4.0 2.8 2.0 4.0 3.0 2.5 3.0 2.3 1.5 4.0 2.5 1.8 4.0 2.8 2.0 4.0 3.0 2.5 4.0 2.8 2.0 4.0 3.0 2.5 3.0 2.0 1.2 3.0 2.0 1.2

g 80 90 125 175 200 115 155 205 250 105 115 155 205 250 120 160 210 255 240 285 80 105

4.0

VDE-tested

210

Cuts fine wires cleanly over the complete length of the blades

Slim head style and precise cut at blade tips: Advantageous when working in confined areas

61


71

71 KNIPEX-”CoBolt”,

Compact Bolt Cutters (Lever Action Center Cutters) 왘 with precision blades for soft, hard and piano wire 왘 cuts material like bolts, nails, rivets, etc. up to 5.2 mm dia. 왘 exceptional cutting performance with minimum effort because of new lever action design 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC 왘 forged 왘 Chrome Vanadium electric steel, oil-hardened and tempered

patented

71 01 200

71 02 200

Model 71 31 200: 왘 the recess in the blade allows easier cutting of thicker wires, e. g. for false ceilings

71 11 200

The KNIPEX Compact Bolt Cutter is a "clever muscle man". The newly designed lever action mechanism guarantees an extremely favourable lever ratio with low friction. The cutting performance is 20 times higher than the handforce applied.

Requires 61% less effort. Cutting a piano wire of 2.0 mm dia. with the KNIPEX-"CoBolt" requires handforce of 192 N (19.2 kp) instead of 499 N (49.9 kp) with a High Leverage Diagonal Cutter of the same length.

Model 71 11 200: with opening spring and stirrup lock Article-No. 9 EAN- 9 Style 9 Head Length Code mm 400377371 01 200 010067

0

9 Handles

atramentized

plastic coated

atramentized

71 02 200

047056

71 11 200

022312

1

atramentized

with two-colour dual component handles plastic coated

71 31 200

030805

3

atramentized

plastic coated



9 Cutting capacities ø mm ø mm ø mm ø mm 6.0 5.2 4.0 3.6

g 340

6.0

5.2

4.0

3.6

380

6.0

5.2

4.0

3.6

350

6.0

5.2

4.0

3.6

340 71 31 200: The recess near the joint keeps thicker wires to be cut in a secure position, ensuring optimum application of cutting performance

72

72 Diagonal Cutter

for fibre optics (Glass Fibre Cable) 왘 specially developed for cutting glass fibre cable (fibre optics) 왘 cutting face flush ground 왘 cutting edges additionally induction hardened 왘 with opening spring 왘 Vanadium electric steel, oil-hardened and tempered

72 51 160

Article-No. 9 EANLength mm

72 51 160 62

9 Head

9 Handles



Code 4003773-

028031

polished

plastic coated

g 170


72

72 Diagonal Cutters

for plastics and lead 왘 cutting face flush ground 왘 non-bevelled, for flush cutting sprues off plastic components or soft materials such as lead 왘 with opening spring 왘 Vanadium electric steel, oil-hardened and tempered

72 01 160

72 11 160 Style 1: 45° angled blades

72 21 160 Style 2: 85° angled blades Article-No. 9 EANLength mm

72 01 140 160 180 72 02 125 72 11 160

Code

9 Style

9 Head



9 Handles

all pliers with

0

polished

plastic coated

1

polished polished

with two-colour dual component handles plastic coated

g 115 170 200 95 150

polished

plastic coated

160

4003773-

018247 013389 028482 044215 018261

45° 72 21 160

026914

12 85°

74

74 Center Cutter 왘 with forged-on axle for heaviest duty 왘 with precision cutting edges for soft, hard and piano wire 왘 cuts hard, thick wires with less effort than other diagonal cutters of the same length 왘 centric precision cutting edges 왘 high cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle, transmission ratio and ergonomic handle shape

74 91 250

왘 cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC 왘 Chrome Vanadium electric steel, oil-hardened and tempered

fixed, forged-on axle

Article-No. 9 EANLength Code mm 400377374 91 250 013396

9 Head

polished

9 Handles

plastic coated

9 Cutting capacities ø mm ø mm ø mm ø mm 5.0 5.0 3.8 3.5

 g 395

The cutting edges are in the center of the cutter head

63


74

74 High Leverage Diagonal Cutters DIN ISO 5749

74 01 200

74 02 180

74 06 200

왘 with forged-on axle for heaviest duty 왘 suitable for all types of wire including piano wire 왘 high cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle, transmission ratio and ergonomic handle shape 왘 precision cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC 왘 the 250-mm-long diagonal cutter is suitable for copper conductors up to 16 mm2 and aluminium conductors up to 35 mm2 왘 Chrome Vanadium electric steel, oil-hardened and tempered Style 2: 왘 12° angled head for flush cutting, providing space of approx. 70 mm for gripping

fixed, forged-on axle

The choice of material (Chrome Vanadium), lever ratio and cutting edge angle mean that KNIPEX High Leverage Diagonal Cutters are particularly designed for the cutting of hard wires. Fixed, forged-on axle for work under continuous stress.

Requires 21% less effort. Cutting a medium hard wire of 2.5 mm dia. with a High Leverage Diagonal Cutter (length 160 mm) requires an handforce of only 293 N (29.3 kp) instead of 370 N (37.0 kp) with a common Diagonal Cutter of the same length.

5 70 mm

74 21 200 Article-No. 9 EAN- 9 Style 9 Head Length Code mm 400377374 01 140 013433 160 013440 180 013457 200 013464 250 013471 74 02 140 042419 160 023081 180 023074 200 040309 250 042402 74 04 160 005070 74 05 140 039617 160 022961 180 022978 200 035367 250 039754 74 06 160 040705 180 022985 200 033820 250 041955 74 07 200 018414 250 018421 74 12 180 060192 1

74 21 160 74 21 200 74 22 200

64

polished

polished

9 Handles

plastic coated

with two-colour dual component handles

chr. plated chrome plated

chrome plated with two-colour dual component handles

chrome plated

insulated with two-colour dual component handles

chrome plated polished

034322 2 polished 034636 12° polished 051831 polished

VDE-tested plastic dipped insulated VDE-tested with two-colour dual component handles plastic coated plastic coated with two-colour dual component handles

9 Cutting capacities



ø mm 3.1 3.4 3.8 4.2 4.6 3.1 3.4 3.8 4.2 4.6 3.4 3.1 3.4 3.8 4.2 4.6 3.4 3.8 4.2 4.6 4.2 4.6 3.8

ø mm 2.0 2.5 2.7 3.0 3.5 2.0 2.5 2.7 3.0 3.5 2.5 2.0 2.5 2.7 3.0 3.5 2.5 2.7 3.0 3.5 3.0 3.5 2.7

ø mm 1.5 2.0 2.2 2.5 3.0 1.5 2.0 2.2 2.5 3.0 2.0 1.5 2.0 2.2 2.5 3.0 2.0 2.2 2.5 3.0 2.5 3.0 2.2

g 130 180 220 260 390 160 210 255 300 420 165 160 210 255 300 420 215 260 305 440 340 475 255

3.4 4.2 4.2

2.5 3.0 3.0

2.0 2.5 2.5

180 260 300

74 12 180

Style 1: 왘 with opening spring; to be activated if required

Induction hardened precision blades also suitable for piano wire


75

75 Electronics Diagonal Cutters,

slim pattern

DIN ISO 9654

75 02 125

Style 0: 왘 with bevel

75 12 125

Style 1: 왘 with bevel and lead catcher (can be unscrewed), no uncontrolled loss of cut wire ends

Style 2: 왘 with small bevel

Style 5: 왘 particularly narrow head, with bevel

Style 3: 왘 with small bevel and lead catcher (can be unscrewed), no uncontrolled loss of cut wire ends

75 52 125 Article-No. 9 EAN- 9 Style Length Code mm 400377375 02 125 040491 75 12 125 040514 75 22 125 040538 75 32 125 040552 75 52 125 040576

왘 precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics 왘 with precision cutting edges for soft and hard wire, also suitable for thin piano wire 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC 왘 low-friction double spring for gentle and even opening 왘 high grade special tool steel, oil-hardened and tempered

9 Head

9 Handles

9 Cutting capacities

KNIPEX Electronics Diagonal Cutters are suitable for work in confined areas due to their slim head. Their precise cutting edges can also cut thin piano wire.

6.5

10.5



14.0

all pliers

0 1 2 3 5

burnished with plastic handles

76

ø mm 0.2-1.3 0.2-1.3 0.2-1.3 0.2-1.3 0.2-1.0

ø mm ø mm ø mm 1.0 0.6 0.4 1.0 0.6 0.4 1.0 0.4 0.4 1.0 0.4 0.4 0.6 0.5 0.3

g 80 80 80 90 85

76 Electro-Mechanics' Diagonal Cutters DIN ISO 5749 왘 with precision cutting edges for soft, hard and piano wire; also suitable for thin copper wire 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 63 HRC 왘 lap joint 왘 Vanadium electric steel, oil-hardened and tempered

76 01 125

Style 1: 왘 with bevel 왘 low-friction double spring for gentle and even opening Style 2: 왘 without bevel for flush cutting of soft wires 왘 low-friction double spring for gentle and even opening Style 8: 왘 particulary tapered head with small bevel for work in confined areas (cable harnesses, multiple strand wires)

Style 0: 왘 with bevel

76 05 125

9.0

Article-No. 9 EAN- 9 Style Length mm 400377376 01 125 018490 76 03 125 018506 76 05 125 005315 76 12 125 048015 76 22 125 048022 76 81 125 018544

9 Head

9 Handles

9 Cutting capacities

 16.0

Code

0

1 2 8

polished chr. pl. chr. pl. polished polished polished

plastic coated plastic coated with two-colour dual component handles plastic coated

ø mm 0.4-2.5 0.4-2.5 0.4-2.5 0.4-2.5 0.4-2.5 0.4-1.3

ø mm ø mm ø mm 1.8 1.0 0.6 1.8 1.0 0.6 1.8 1.0 0.6 1.8 1.0 0.6 1.0 0.6 -

14.5

g 90 90 115 110 110 90

65


77

77 Electronics Diagonal Cutters DIN ISO 9654

77 01 115 round head, with bevel

77 02 115

왘 precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics 왘 precision box joint 왘 low-friction double spring for gentle and even opening 왘 the polish or mirror polish (only finish 2) together with a fine film of oil offer the best possible rust protection - no circuit faults caused by peeling chrome from plated tools 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 62 HRC 왘 special tool steel, oil-hardened and tempered Models 77 22 115, 77 42 115, 77 42 130 and 77 52 115: 왘 cutting edges hardness approx. 57 HRC

round head, with small bevel

Models 77 21 115: 왘 pointed head, without bevel

77 32 115 pointed head, with small bevel

77 42 115 pointed head, without bevel

77 52 115 pointed, flat head, with small bevel

Models 77 21 130: 왘 round head, without bevel

77 12 115 round head, with bevel and lead catcher - no uncontrolled loss of cut wire ends

77 72 115 pointed mini-head, with small bevel D

A

B

77 12 115

77 22 115 round head, without bevel Article-No. 9 EAN- 9 Style Length Code mm 400377377 01 115 018568 130 018575 77 02 115 039334 130 039341 77 11 115 018629 77 12 115 043768 77 21 115 018650 130 018667 77 22 115 043782 130 040446 77 32 115 044307 77 42 115 039761 130 018773 77 52 115 040750 77 72 115 040958

66

9 Head

9 Handles

all pliers with 0

1 2

polished

plastic coated

mirror polished

with two-colour dual component handles plastic coated two-colour dual component handles with two-colour dual component handles with two-colour dual component handles two-colour dual component handles with two-colour dual component handles two-colour dual component handles two-colour dual component handles

polished mirror polished mirror polished mirror polished

3 4

mirror polished mirror polished

5 7

mirror polished mirror polished

9 Dimensions B A mm 14.0 18.0 14.0 18.0 14.0 14.0 14.0 18.0 14.0 18.0 14.0 14.0 18.0 14.0 10.5

mm 11.0 15.0 11.0 15.0 11.0 11.0 11.0 15.0 11.0 15.0 11.0 11.0 15.0 11.0 9.5



9 Cutting capacities D mm 7.5 9.5 7.5 9.5 7.5 7.5 7.5 9.5 7.5 9.5 7.5 7.5 9.5 7.5 6.5

ø mm 0.3-1.6 0.3-2.0 0.3-1.6 0.3-2.0 0.3-1.6 0.3-1.6 0.3-1.3 0.3-1.6 0.3-1.3 0.3-2.0 0.3-1.3 0.3-1.3 0.3-1.6 0.3-1.0 0.3-0.8

ø mm 1.2 1.5 1.2 1.5 1.2 1.2 1.0 1.3 1.0 1.5 1.2 1.0 1.3 0.8 -

ø mm 0.5 0.8 0.5 0.8 0.5 0.5 0.5 0.5 0.5 -

g 70 110 80 125 70 80 70 115 85 120 80 85 125 80 70


77

77 Electronics Diagonal Cutters ESD DIN ISO 9654

77 02 115 ESD round head, with small bevel

77 12 115 ESD round head, with bevel and lead catcher - no uncontrolled loss of cut wire ends

왘 precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics 왘 electrically discharging version - dissipative 왘 precision box joint 왘 low-friction double spring for gentle and even opening 왘 the mirror polish together with a fine film of oil offer the best possible rust protection - no circuit faults caused by peeling chrome from plated tools 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 62 HRC 왘 with two-colour dual component handles, black/grey 왘 special tool steel, oil-hardened and tempered Models 77 22 115 ESD, 77 42 115 ESD and 77 52 115 ESD: 왘 cutting edges hardness approx. 57 HRC

ESD When using pliers on components endangered by electrostatic discharge (ESDS - electro static discharge sensitive devices) relevant regulations and standards (e. g. IEC TR 61 340-5, DIN EN 61 340-5, SP Method 2472) require a controlled discharge of electric energy through the handles of such pliers. The KNIPEX Electronics Pliers in ESD version discharge the electrostatic energy correspondingly slowly and under control to protect endangered components.

D

A

77 12 115 B

77 22 115 ESD round head, without bevel

77 32 115 ESD

77 42 115 ESD

77 52 115 ESD

77 72 115 ESD

pointed head, with small bevel

pointed head, without bevel

pointed, flat head, with small bevel

pointed mini-head, with small bevel

Article-No. Length mm

77 02 115 ESD 77 12 115 ESD 77 22 115 ESD 77 32 115 ESD 77 42 115 ESD 77 52 115 ESD 77 72 115 ESD

9 EAN- 9 Style Code

9 Head

9 Handles

all pliers with

4003773-

025092 025108 025115 025122 031901 025139 024330

0 1 2 3 4 5 7

rund rund rund spitz spitz spitz mini spitz

mirror polished

with two-colour dual component handles

9 Dimensions B mm 14.0 14.0 14.0 14.0 14.0 14.0 10.5

A mm 11.0 11.0 11.0 11.0 11.0 11.5 9.5

9 Cutting capacities D mm 7.5 7.5 7.5 7.5 7.5 7.5 6.5

ø mm 0.3-1.6 0.3-1.6 0.3-1.3 0.3-1.3 0.3-1.3 0.3-1.0 0.3-0.8

ø mm ø mm 1.2 0.5 1.2 0.5 1.0 1.2 0.5 1.0 0.8 0.5 -

 g 80 75 85 80 85 80 70

67


78

78 Electronics Super-Knips DIN ISO 9654

78 03 125

78 13 125

왘 precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics 왘 precision-ground cutting edges without bevel for flush cutting 왘 precision shaped tips also cut close sitting wire from 0.2 mm dia. 왘 joint with stainless steel rivet 왘 extremely smooth movement for minimum operator fatigue 왘 with opening spring and restricted opening

KNIPEX Super-Knips have precision ground cutting edges for clean, flush cutting. The very smooth joint and the opening spring provide high operation comfort.

Style 0; 1; 2: 왘 INOX - stainless steel 왘 cutting edge hardness approx. 54 HRC

78 23 125

Style 2: 왘 with 60° angled blades Style 3; 4; 6; 7: 왘 special tool steel

Angled blades for clean cut also in confined areas

Style 3; 4: 왘 cutting edge hardness approx. 60 HRC

78 31 125

B D Style 1; 4; 7: 왘 with lead catcher - no uncontrolled loss of cut wire ends

78 41 125

A

Style 6; 7: 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC

78 71 125

60°

B D A

78 61 125

Article-No. 9 EAN- 9 Style Length Code all pliers with mm 400377378 03 125 035381 0 78 13 125 035398 1 78 23 125 043096 2 60° 78 31 125 039778 3 78 41 125 040767 4 6 78 61 125 035404 5 7 78 71 125 043799 6

68

Modell 78 61 125: 왘 also suitable for cutting glass fibre cables (fibre optics)

9 Head

INOX INOX INOX burnished burnished burnished burnished

9 Handles

with two-colour dual component handles

9 Dimensions B mm 9.0 9.0 5.5 9.0 9.0 9.0 9.0

A mm 13.5 13.5 13.5 12.5 12.5 13.5 13.5

9 Cutting capacities D mm 7.5 7.5 7.5 7.5 7.5 7.5 7.5

ø mm 0.2-1.6 0.2-1.6 0.2-1.0 0.2-1.0 0.2-1.0 0.2-1.6 0.2-1.6

ø mm ø mm 1.0 1.0 0.6 1.2 0.6 1.2 0.6

 g 45 50 45 50 50 45 50


78

78 Electronics Super-Knips ESD DIN ISO 9654

78 03 125 ESD

78 13 125 ESD

왘 precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics 왘 electrically discharging version - dissipative 왘 precision-ground cutting edges without bevel for flush cutting 왘 precision shaped tips also cut close sitting wire from 0.2 mm dia. 왘 joint with stainless steel rivet 왘 extremely smooth movement for minimum operator fatigue 왘 with opening spring and restricted opening 왘 with two-colour dual component handles black/green Style 0; 1: 왘 INOX - stainless steel 왘 cutting edge hardness approx. 54 HRC Style 1; 7: 왘 with lead catcher - no uncontrolled loss of cut wire ends

78 61 125 ESD

Style 6; 7: 왘 cutting edges separately induction hardened, cutting edge hardness approx. 64 HRC 왘 special tool steel

Length mm

78 03 125 ESD 78 13 125 ESD 78 61 125 ESD 78 71 125 ESD

9 EAN- 9 Style Code

9 Head

9 Handles

all pliers with

4003773-

025146 025153 025184 025191

0 1 6 7

1 7

INOX INOX burnished burnished

with two-colour dual component handles

ESD When using pliers on components endangered by electrostatic discharge (ESDS - electro static discharge sensitive devices) relevant regulations and standards (e. g. IEC TR 61 340-5, DIN EN 61 340-5, SP Method 2472) require a controlled discharge of electric energy through the handles of such pliers. The KNIPEX Electronics Pliers in ESD version discharge the electrostatic energy correspondingly slowly and under control to protect endangered components.

78 71 125 ESD

Article-No.

KNIPEX Super-Knips have precision ground cutting edges for clean, flush cutting. The very smooth joint and the opening spring provide high operation comfort.

9 Dimensions B mm 9.0 9.0 9.0 9.0

A mm 13.5 13.5 13.5 13.5

D mm 7.5 7.5 7.5 7.5

9 Cutting capacities



ø mm 0.2-1.6 0.2-1.6 0.2-1.6 0.2-1.6

g 45 45 45 50

ø mm ø mm 1.0 1.0 1.2 0.6 1.2 0.6

B D A

69


81

81 Pipe Gripping Pliers 왘 ideal for tightening and releasing plastic pipe joints, round union nuts, etc. from 25 up to 65 mm dia. 왘 with serrated gripping jaws 왘 4-position adjustable slip joint 왘 Chrome Vanadium electric steel, oil-hardened and tempered

81 03 230

Model 81 13 230: 왘 with plastic jaws for careful installation up to 60 mm dia.

81 13 230

Bestell-Nr. Length mm

81 03 230 81 13 230 81 19 230

9 EAN-

9 Head

9 Handles

9 Working capacities



Code ø mm 25-65 25-60

4003773-

018957 050124 050124

chr. plated plastic coated chr. plated plastic coated 2 sets of plastic jaws for 81 13 230

82

g 290 295

Easy tightening and releasing of plastic pipe joints

82 Angle Nose Battery Plier 왘 for nuts and screws up to max. 14 mm width across flats 왘 serrated gripping surfaces 왘 Chrome Vanadium electric steel, oil-hardened and tempered

82 51 200 Article-No. 9 EANLength mm

82 51 200

9 Head



9 Handles

Code g 215

4003773-

015079

polished

plastic coated

84

84 Cycle Pliers 왘 for very narrow screw connections 왘 special tool steel, oil-hardened and tempered Model 84 11 200: 왘 straight head

84 11 200 Article-No. 9 EANLength mm

Model 84 21 200: 왘 20° angled head

9 Style

9 Head 9 Handles

Code 051923

84 21 200

051930

1

9 Recess



polished plastic coated

mm 3.5

ø mm 6 /10

g 170

polished plastic coated

3.5

6 /10

170

4003773-

84 11 200

9 Head thickness

straight

2 20°

20° Angled head for work in confined areas

71


83

83 Pipe Wrenches 90° DIN 5234

geprüfte Sicherheit

83 10 015 Article-No. 9 EAN-

Inch

4003773-

014188 014195 014201 022329 022336

1 1 1/2 2 3 4

왘 red powder coated, jaws bright ground 왘 forged 왘 Chrome Vanadium steel, oil-hardened and tempered



9 Capacity

Code

83 10 010 83 10 015 83 10 020 83 10 030 83 10 040

왘 Swedish pattern 왘 90° angled jaws 왘 jaws with offset teeth in opposite direction 왘 teeth additionally induction hardened 왘 T-beam handle design 왘 captive adjusting nut

Working capacity mm 0 - 42 0 - 60 0 - 70 10 - 105 10 - 130

83

Length mm 310 420 560 650 750

g 785 1425 2590 3450 4910

83 Pipe Wrenches 45° DIN 5234

geprüfte Sicherheit

왘 Swedish pattern 왘 45° angled jaws 왘 jaws with offset teeth in opposite direction 왘 teeth additionally induction hardened 왘 T-beam handle design

왘 captive adjusting nut 왘 red powder coated, jaws bright ground 왘 forged 왘 Chrome Vanadium steel, oil-hardened and tempered

83 20 015 Article-No. 9 EANCode Inch

4003773-

83 20 010 83 20 015 83 20 020

014218 014225 014232



9 Capacity

1 1 1/2 2

Working capacity mm 0 - 42 0 - 60 0 - 70

83

Length mm g 320 810 430 1490 570 2820

83 Pipe Wrenches S-Type DIN 5234

geprüfte Sicherheit

83 30 015 Article-No. 9 EAN-

Inch

4003773-

83 30 005 83 30 010 83 30 015 83 30 020 83 30 030 72

025221 014249 014256 014263 014164



9 Capacity

Code 1/2 1 1 1/2 2 3

왘 slim, S-type jaw design, 45° angled jaws 왘 jaws with offset teeth in opposite direction 왘 teeth additionally induction hardened 왘 three-point gripping on pipes, self-locking

Working capacity mm 0 - 35 0 - 42 0 - 60 10 - 70 10 - 120

Length mm g 245 500 320 870 420 1570 540 2540 680 4295

왘 T-beam handle design 왘 captive adjusting nut 왘 red powder coated, jaws bright ground 왘 forged 왘 Chrome Vanadium steel, oil-hardened and tempered


87

87 KNIPEX-"Cobra" XL / XXL,

Pipe Wrenches and Water Pump Pliers

patented

“Cobra XXL” - Water Pump Plier and Pipe Wrench in one tool. The optimized jaw design grips nuts and pipes up to 4 1/2“ with a weight and size of a 2“ Pipe Wrench. Besides the tremendous capacity this heavy duty plier is adjustable quickly, securely and firmly directly on the workpiece.

87 01 560

87 01 400

왘 Pipe Wrench and Water Pump Plier in one tool 왘 self-locking on pipes and nuts: no slipping on the workpiece; low handforce required 왘 fast and firm adjustment directly on the workpiece

왘 왘 왘 왘 왘

no unintentional shifting non-slip joint fine adjustment optimum lever action can be used as a wrench in a lot of situations

왘 gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: low wear and secure gripping 왘 Chrome Vanadium electric steel, oil-hardened and tempered

Model 87 01 400: 왘 capacity of jaws for pipes up to 3 1/2" at a total length of a 1 1/2" Pipe Wrench 왘 20% less weight than a 1 1/2“ Pipe Wrench 왘 27 adjustment positions Model 87 01 560: 왘 capacity of jaws for pipes up to 4 1/2" at a total length of a 2" Pipe Wrench 왘 40% less weight than comparable Pipe Wrenches 왘 20 adjustment positions

Fine adjustment by pushing a button: quick and comfortable

Optimized shape of jaws for gripping pipes and nuts

Fast and firm adjustment directly on the workpiece

Article-No. 9 EANLenth mm

87 01 400 87 01 560

9 Head

9 Handles

Code

Self-locking on pipes and nuts. No slipping on the workpiece and less handforce required

9 Working capacities for pipes for nuts Inch

4003773-

005636 044321

87 01 560: Jaw-capacity for pipes up to 4 1/2“ at a weight and length of a 2“ Pipe Wrench

polished

plastic coated

3 1/2 4 1/2

95 120



mm (across flats) g 1190 2760

For the complete ”Cobra“Range from 150 - 560 mm see page 75

73


86

86 Plier Wrenches,

Plier and Wrench in a single tool 왘 excellent for gripping, holding, pressing and bending workpieces 왘 for careful installation of finished-surface components 왘 zero backlash jaw surface pressure prevents damage to edges of sensitive components 왘 fast adjustment directly on the workpiece by pushing a button 왘 no unintentional shift of the gripping jaws and no slipping of the joint 왘 replaces a complete set of spanners 왘 parallel jaws allow infinitely variable gripping of all widths to the specified maximum size 왘 the action of the jaws allows screwed connections to be tightened and released quickly using the ratchet principle 왘 lever transmission greater than 10 - 1 for strong gripping power 왘 also for tile breaking

patented

86 03 180

86 05 250

86 03 300 35/46/60 mm

The patented Plier Wrench is a multi functional fastening, gripping and holding tool with fast adjustment pushing a button. The high lever ratio, parallel jaws without profile and infinitely variable adjustment guarantee a secure and smooth gripping of the workpiece free from any backlash.

Working on plated fittings without damage of the surface

Compressive strain areas when force is applied on the Plier Wrench 86 03 250 and a conventional open end wrench

Works using the ratchet principle

Fast adjustment by pushing a button

Article-No. 9 EAN-

9 Handles

Length mm

86 03 180 250 300 86 05 180 250

9 Head

Code 4003773-

028260 022084 040224 047162 047841

nickel plated

plastic coated

nickel plated

with two-colour dual component handles

Plier Wrench: zero backlash under pressure

< compressive < strain

+

Conventional open end wrench: edge pressure causes surface damage



9 Working Capacities Inch 1 3/8 1 3/4 2 3/8 1 3/8 1 3/4

-

mm to 35 to 46 to 60 to 35 to 46

g 260 540 725 280 570

86 03 300: enormous pressure and a capacity up to 60 mm/ 2 3/8" allows application even on large size nuts

74


87

87 KNIPEX-"Cobra",

the HiTech Water Pump Pliers

patented

DIN ISO 8976

87 01 150

87 01 180

87 01 250

87 01 300

87 02 250

왘 fast adjustment directly on the workpiece: fast and comfortable handling 왘 fine adjustment: ensures optimum adjustment to differently sized workpieces and user-friendly handle position; 8701150: 11 adjustment positions 8701180: 11 adjustment positions 8701250: 11 adjustment positions 8701300: 14 adjustment positions 8701400: 27 adjustment positions 8701560: 20 adjustment positions 왘 secure catching of the hinge bolt: no unintentional shifting 왘 box-joint design: high stability because of double guide 왘 self-locking on pipes and nuts: no slipping on the workpiece and low handforce required 왘 gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: low wear and secure gripping

KNIPEX-"Cobra" - the HiTech Water Pump Pliers. No more time-consuming test-adjusting of the correct opening size. Just position the upper jaw to the workpiece, push button and move close the lower jaw, ingeniously simple. 왘 one-hand adjustment 왘 guard prevents operators' fingers being pinched 왘 favourable lever action: optimum transmission of force 왘 Chrome Vanadium electric steel, oil-hardened and tempered Model 87 01 150: 왘 Mini-”Cobra”, length only 150 mm

87 05 250

Self-locking on pipes and nuts. No slipping on the workpiece and less handforce required

Article-No. 9 EANLength mm

87 01 150 180 250 300 400 560 87 02 180 250 300 87 03 180 250 300 87 05 250 300

9 Head

9 Handles

Code

9 Capacities for pipes

4003773-

060116 013297 013303 014157 005636 044321 042396 040316 029144 005667 005674 014119 005681 014126

Fine adjustment by pushing a button: quick and comfortable

 for nuts mm (across flats)

Inch

polished

with non-slip plastic coating

polished

plastic coated

polished

with two-colour dual component handles with non-slip plastic coating

chrome plated chrome plated

with two-colour dual component handles

1 1/4 1 1/4 1 1/2 2 3 1/2 4 1/2 1 1/4 1 1/2 2 1 1/4 1 1/2 2 1 1/2 2

Fast and firm adjustment directly on the workpiece

30 30 36 46 95 120 30 36 46 30 36 46 36 46

g 135 170 300 545 1190 2760 185 320 580 170 300 545 320 580

Gripping surfaces with special hardened teeth for secure gripping of differently shaped workpieces

KNIPEX-”Cobra XL / XXL“ see also page 73 75


87

87 KNIPEX-”Cobra..matic”, patented

Water Pump Pliers for one-hand operation DIN ISO 8976

왘 the proved "Cobra" with automatic adjustment 왘 the plier can be opened and adjusted directly at the workpiece with one hand

87 11 250 Article-No. 9 EANLength mm

87 11 180 250 87 19 180 250

9 Head

9 Handles

9 Capacities for pipes

Code

Inch

4003773-

026921 022107 026938 022640

 for nuts

polished

with non-slip plastic coating

1 1/4 1 1/2

mm (across flats) 30 36

g 170 300

왘 the "Cobra..matic" closes when pushing a button 왘 the integrated spring of the automatic adjustment is shielded in the handles 왘 gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: low wear and secure gripping 왘 Chrome Vanadium electric steel, oil-hardened and tempered

spare spring

87

87 Multiple Slip Joint Spanner patented

87 41 250

Multiple Slip Joint Spanner Working on tight nuts as the second spanner for with rounded edges tightening locknuts

Fine adjustment by pushing a button: fast and comfortable

왘 for hexagonal screws and nuts width across flats 10 - 32 mm (7/16" - 1 1/4"); self-locking in the range of 17 - 32 mm (11/16" - 1 1/4"); no slip on workpieces; less effort required 왘 replaces a complete set of spanners 왘 perfect fitting grip on bolt heads and nuts with metric or imperial sizes; no rounding of gripping surfaces 왘 the plier-type gripping movement of the jaws allows threaded connections to be tightened and released quickly using the ratchet principle 왘 ideal for tightening locknuts 왘 secure and tight grabbing of bolt heads with rounded edges, rusted nuts or heavily coated workpieces 왘 secure catch of the hinge bolt: no unintentional shifting 왘 box-joint design: high stability because of double guide 왘 guard prevents operators' fingers being pinched 왘 ergonomic handle design with non-slip plastic coating for comfortable grip particularly with large and tight nuts

Self-locking: no slip on workpieces; less effort required

Article-No. 9 EANLength mm

87 41 250

76

9 Head

9 Handles



9 Capacities

Code 4003773-

054566

polished

with non-slip plastic coating

mm 10-32

Inch 7/16“-1 1/4“

g 315

The new KNIPEX Multiple Slip Joint Spanner is a combination tool that offers the convenience of the comfortable push-button adjustment on the workpiece and the function of an adjustable spanner. Zero backlash pressure of the jaws avoids slipping on the threaded connection or a rounding effect on the edges. Even rounded edges and heavily coated workpieces that do not offer a convenient gripping surface to conventional wrenches, can be loosened with the exceptionally powerful gripping jaws of the Multiple Slip Joint Spanner. 왘 one-hand fine adjustment by pushing a button with 15 adjustment positions directly on the workpiece for perfect grip on different sized workpieces and a favourable position of the hand 왘 Chrome Vanadium steel, oil-hardened and tempered


88

88 KNIPEX-"Alligator",

Water Pump Pliers DIN ISO 8976

88 01 180

88 01 250

왘 box-joint design: high stability because of double guide 왘 self-locking on pipes and nuts: no slipping on the workpiece; low handforce required 왘 guard prevents operators' fingers being pinched 왘 favourable lever action: optimum transmission of force 왘 gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: low wear and secure gripping 왘 Chrome Vanadium electric steel, oil-hardened and tempered

88 02 250

88 06 250 Self-locking on pipes and nuts. No slipping on the workpiece and less handforce required

88 07 250 Optimized shape of jaws for gripping pipes and nuts

Article-No. 9 EANLength mm

9 Head

9 Handles

Code

9 Capacities for pipes

 for nuts

1 1/2 1 1/4 1 1/2 2 1 1/4 1 1/2 2 1 1/4 1 1/2 2 1 1/4 1 1/2 2 1 1/2

Inch 36 30 36 46 30 36 46 30 36 46 30 36 46 36

mm (across flats) g 300 185 315 505 215 355 555 185 315 505 215 355 555 370

1 1/2 2

36 46

415 635

4003773-

88 00 250 88 01 180 250 300 88 02 180 250 300 88 03 180 250 300 88 05 180 250 300 88 06 250

019176 034445 013341 013358 044222 019282 029151 042860 005742 019312 060130 035497 042389 039303

polished polished

red lacquered with non-slip plastic coating

polished

with two-colour dual component handles

chrome plated

with non-slip plastic coating

chrome plated

with two-colour dual component handles

chrome plated

88 07 250 300

019343 022350

chrome plated

insulated with two-colours dual component handles , VDE-tested plastic dipped insulated , VDE-tested

77


89

89 Water Pump Pliers

with groove joint DIN ISO 8976

89 01 250

89 05 250 Article-No. 9 EANLength mm

89 01 200 250 89 03 200 250 89 04 250 89 05 200 250

9 Head

9 Handles

9 Capacities for pipes

Code polished

plastic coated

chrome plated chr. plated chrome plated

plastic coated chrome plated with two-colour dual component handles

90

90 Small Water Pump Pliers

1 1/4 1 5/16 1 1/4 1 5/16 1 5/16 1 1/4 1 5/16

Length mm

DIN ISO 8976

90 01 125 90 03 125

78

9 Head

9 Handles

Code

 for nuts

Ø mm

polished chr. plated

plastic coated plastic coated

g 230 335 230 335 325 260 380

왘 easy, convenient engagement in 4 different positions 왘 non-slip joint 왘 all strain removed from the joint screw, hence no wear on pivot 왘 forged from Chrome Vanadium electric steel, oil-hardened and tempered

9 Capacities for pipes

4003773-

013310 019374

mm (across flats) 30 36 30 36 36 30 36

with groove joint

90 03 125

Article-No. 9 EAN-

 for nuts

Inch

4003773-

013327 013334 019367 015086 005841 039310 043836

왘 easy, convenient engagement in 5 different positions due to milled swivel 왘 non-slip joint 왘 can be used as a wrench in a lot of situations 왘 all strain removed from the joint screw, hence no wear on pivot 왘 guard prevents operators' fingers being pinched 왘 gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC for tool length 250 mm: low wear for secure grip 왘 Chrome Vanadium electric

17 17

mm (across flats) 14 14

g 100 100

steel, oil-hardened and tempered Model 89 .. 250: 왘 self-locking on pipes and nuts: no slipping on the workpiece and low handforce required


90

90 Pipe Cutter

for composite pipes and protective tubes 왘 for cutting composite pipes with a diameter of 12.0 25.0 mm and for cutting flexible protective tubes with a diameter of 18.0 – 35.0 mm without damaging the pipe inside 왘 easily exchangeable blades 왘 a calibration arbor can be fitted, for example for Geberit composite pipes with 11.5 and 15.0 mm dia. 왘 high strength special grade steel, oil-hardened and tempered

90 25 20

Protective tube: to be cut with the front blades

Clean cut of protective tubes 18 – 35 mm dia.

Composite pipe: to be cut with the rear cutter

Article-No. 9 EAN-

9 Head

9 Handles

Code

composite pipes protective pipes Length ø mm ø mm mm 12 - 25 18 - 35 210

4003773-

90 25 20

046004

90 29 01 90 29 02 90 29 15

031932 031949 031956

galvanized

with two-colour dual component handles spare blade for composite pipes spare blades for protective tubes calibration arbor for Geberit pipes, 11.5 and 15.0 mm dia.

90

90 Pipe Cutter

g 325 Composite pipes of 12 – 25 mm dia. are cut cleanly and without deformation

for composite and plastic pipes

patented

왘 for cutting thick walled plastic and composite pipes of 26.0 - 40.0 mm dia. 왘 cuts pipes according to the ratchet principle in several strokes 왘 moveable pipe support positions pipes of various diameters correctly for a rectangular cut 왘 easily exchangeable blades 왘 high strength special grade steel, oil-hardened and tempered

90 25 40

Article-No. 9 EAN-



9 Cutting capacities

9 Head

9 Handles

Code 4003773-

90 25 40

045182

galvanized

90 29 40

045199

spare blade

with two-colour dual component handles



9 Cutting capacities ø mm 26 – 40

Length mm 210

g 465

Cutter for Plastic Pipes 94 10 185 see page 89 79


90

90 Punch Lock Riveters

90 41 340

90 42 250 Article-No. 9 EAN- 9 Head Length Code mm 400377390 41 340 028055 90 42 250 047865 90 49 340 028079 90 49 340 M 028497

9 Handles

burnished plastic coated burnished with plastic handles spare punch for 90 41 340 spare die for 90 41 340

9 Capacity



mm

g 900 690

max 1.2 (2 x 0.6)

90

90 Sheet Metal Nibbler

왘 for producing solid connections of all metal section sheets used in partition walls and false ceilings 왘 for U- and C-shaped sections with max 1.2 mm metal (2 x 0.6 mm) 왘 minimum handforce required due to optimum lever transmission

왘 high strength special grade steel, oil-hardened and tempered

Setting the plier for connection of two metal section sheets

The punching tool is pressed through the metal section sheets

The sheet projections are bent

Completed sheet connection

왘 for cutting iron, copper or aluminium plate up to max. 1.2 mm thickness, plastic up to max. 2.0 mm thickness 왘 materials are cut without deformation 왘 clean cut edges - no additional work needed on the cut profile

왘 with chip breaker 왘 easy handling 왘 high strength special steel, particularly stressed parts oil-hardened and tempered

90 55 280: Notching and chip breaking in one operation

Notching without chip breaking

Model 90 41 340: 왘 for two-hand operation Model 90 42 250: 왘 for one-hand operation

90 55 280

Article-No. 9 EANLength mm

90 55 280 90 59 280 80

9 Head

9 Handles



Code 4003773-

026730 027355

nickel plated spare blade

with plastic handles

g 560


90

90 Notching Pliers 왘 special plier for notching out recesses in plastic ledges and casing boxes for electric and sanitary installation 왘 notches can be enlarged by initial and final cut 왘 clean cut edges - no additional work needed on the cut profile 왘 high cutting performance with little handforce due to optimum lever transmission 왘 easy handling 왘 with opening spring and restricted opening 왘 head burnished, handles with plastic handles 왘 cutter head: special tool steel, oil-hardened and tempered

patented

90 61 20

29

32 16

90 61 16

The KNIPEX Notching Plier produces the most common notches in plastic ledges and cable ducts in a simple, fast and clean way. No time-consuming sawing out or nibbling and no additional work required.

20

90 61 20

Article.-No. 9 EAN-

9 Head

9 Handles



9 Capacity

Code

90 61 16

051947

burnished

with plastic handles

16 x 32 mm

Length mm 250

90 61 20

051954

burnished

with plastic handles

20 x 29 mm

250

4003773-

90

g 405 415

Easy notching thanks to high leverage

Clean cut profile requires no additional work

90 Revolving Punch Plier

90 70 220

Article.-No. 9 EANLength mm

90 70 220

9 Finish

왘 for punching holes in leather, textiles and plastic material 왘 with six interchangeable punches: 2.0/2.5/3.0/3.5/4.0/5.0 mm dia. 왘 with opening spring and locking lever 왘 powder-coated for reliable protection against rust 왘 punched and stamped from high-strength sheet steel



Code 4003773-

019411

powder-coated

g 265 Interchangeable punches

81


91

91 Tile Nibbling Pincer,

Parrot Beak Pincer 왘 predrilled holes in tiles can be enlarged and edges formed by nibbling 왘 high grade special tool steel, oil-hardened and tempered

91 00 200 Article-No. 9 EANLength mm

91 00 200

9 Head



9 Handles

Code g 165

4003773-

013754

polished

black atramentized

91

91 Tile Breaking Pincer

왘 for breaking tiles to a scored line 왘 moveable, self-aligning jaw, rubberlined to protect the tile 왘 special tool steel

91 11 190

Article-No. 9 EANLength mm

91 11 190

9 Head



9 Handles

Code g 335

4003773-

019459

black lacquered

plastic coated

91

91 Glass Breaking Pincer 왘 for breaking glass to a scored line 왘 special tool steel, oil-hardened and tempered

91 30 180

Article-No. 9 EANLength mm

91 30 180

82

9 Head

9 Handles

9 Jaw width



Code 4003773-

015093

polished

black atramentized

mm 24.0

g 265


91

91 Glass Nibbling Pincers 왘 for breaking off narrow strips of glass to a scored line 왘 for finishing off glass edges to required profile 왘 special tool steel, oil-hardened and tempered

Model 91 71 160: 왘 narrow version, with opening spring

91 51 160

Article-No. 9 EANLength mm

91 51 160 91 71 160

9 Style

9 Head

9 Handles

9 Jaw width



Code 4003773-

014355 019565

polished polished

plastic coated plastic coated

91

mm 9.5 4

g 155 145

91 Flat Nose Grozing Plier 왘 with soft gripping jaws 왘 for trimming glass edges, e. g. when making leaded glass windows 왘 special tool steel

91 61 160

Article-No. 9 EANLength mm

91 61 160

9 Head

9 Handles

9 Jaw width



Code 4003773-

019527

polished

plastic coated

mm 9.5

g 145

83


92

92 Precision Tweezers for Electronics

Precision Tweezers,

왘 왘 왘 왘

pointed shape

for fine mounting work straight pattern smooth gripping surfaces particularly slim tips

Model 92 22 04: 왘 non-reflective mattfinished 왘 gripping surfaces mattfinished for optimum grip 왘 Chrome nickel steel: stainless, anti-magnetic (18/10), not temperable, very popular electronics quality

92 22 04

92 22 06

92 22 07

92 23 05

92 24 01

Model 92 22 06: 왘 non-reflective mattfinished 왘 gripping surfaces mattfinished for optimum grip 왘 Chrome nickel steel: stainless, anti-magnetic (18/10), not temperable, very popular electronics quality

Model 92 22 07: 왘 non-reflective mattfinished 왘 stainless, anti-magnetic and acid-proof Model 92 23 05: 왘 TITANIUM 왘 electrically conductive 왘 lightweight 왘 non-reflective mattfinished 왘 stainless, anti-magnetic and acid-proof Model 92 24 01: 왘 mirror finish nickel plated and polished

Precision Tweezers, needle-pointed shape 왘 왘 왘 왘 왘

Model 92 22 12: 왘 straight pattern

for ultra fine mounting work extra fine tips smooth gripping surfaces stainless, anti-magnetic non-reflective mattfinished

Model 92 22 13: 왘 American shape, solid 왘 straight pattern 왘 stainless, anti-magnetic and acid-proof

Model 92 34 28: 왘 bent tips

92 22 12

92 22 13

Model 92 32 29: 왘 sickel-shaped tips 왘 Chrome nickel steel: stainless, anti-magnetic (18/10), not temperable, very popular electronics quality 왘 gripping surfaces mattfinished for optimum grip

92 34 28

92 32 29

Precision Tweezers, with dowel pin, pointed shape 왘 universally applicable 왘 narrow tips

왘 gripping surfaces with fine transverse serration 왘 chequered handles

Model 92 24 34: 왘 straight pattern 왘 nickel plated

92 22 35

92 24 34

92 34 36

84

Model 92 22 35: 왘 straight pattern 왘 non-reflective mattfinished 왘 stainless, anti-magnetic and acid-proof

Model 92 34 36: 왘 bent tips 왘 nickel plated Model 92 34 37: 왘 bent tips 왘 black non-reflective lacquered

92 34 37

Data Table see page 87


Precision Tweezers, blunt shape 왘 왘 왘 왘

universally applicable straight pattern wide, round tips chequered handles

92 44 42

92 64 43

92 64 44

92 70 46

92 72 45

Precision Tweezer, rectangular blunt

92 84 18

Model 92 44 42: 왘 jewellers´ tweezer 왘 round tips, approx. 2 mm wide 왘 gripping jaws with fine crosswise serration (cross cut) 왘 nickel plated

Model 92 70 46: 왘 round tips, approx. 3.5 mm wide 왘 gripping surfaces with fine transverse serration 왘 black non-reflective lacquered

Model 92 64 43: 왘 round tips, approx. 3.0 mm wide 왘 gripping surfaces with fine transverse serration 왘 nickel plated

Model 92 72 45: 왘 round tips, approx. 3.5 mm wide 왘 serrated gripping surfaces 왘 non-reflective mattfinished 왘 stainless, anti-magnetic and acid-proof

Model 92 64 44: 왘 round tips, approx. 3.5 mm wide 왘 gripping surfaces with fine transverse serration 왘 nickel plated

왘 mounting tweezer 왘 rectangular tips, approx. 0.9 mm wide 왘 gripping surfaces with fine transverse serration 왘 nickel plated

Precision Tweezer, round slim shape 왘 round tips, approx. 2 mm wide 왘 smooth gripping surfaces 왘 stainless, anti-magnetic and acid-proof

92 52 23

Precision Tweezers, for mounting work 왘 smooth gripping surfaces 왘 non-reflective mattfinished

Modell 92 02 53: 왘 for SMD-technology* 왘 angled tips, width approx. 1 mm 왘 gripping surfaces mattfinished for optimum grip 왘 Chrome nickel steel: stainless, anti-magnetic (18/10), not temperable, very popular electronics quality

92 02 53

92 02 54

92 12 52

92 02 55 * SMD-technology: technique for soldering surface mounted components on printed circuit boards without using holes.

Model 92 02 54: 왘 for SMD-technology* 왘 angled tips, width approx. 1 mm 왘 gripping jaws 3.5 mm wide, for cylindrical components of 0.6 mm dia. 왘 gripping surfaces mattfinished for optimum grip

왘 Chrome nickel steel: stainless, anti-magnetic (18/10), not temperable, very popular electronics quality Model 92 02 55: 왘 gripping jaws 3.5 mm wide, for cylindrical components of 0.8 mm dia. 왘 chequered handles 왘 stainless, anti-magnetic and acid-proof Model 92 12 52: 왘 bent tips 왘 extra strong tips 왘 stainless, anti-magnetic 85


92

92 Precision Tweezers for Electronics

Precision Tweezers ESD

92 08 78 ESD

92 08 79 ESD

92 38 75 ESD

92 28 69 ESD

92 58 74 ESD

92 28 70 ESD

92 78 77 ESD

92 28 71 ESD

92 88 73 ESD

왘 Chrome nickel steel: stainless, anti-magnetic (18/10), not temperable, very popular electronics quality 왘 ESD coating: non-reflective black, with a surface resistance of approx. 10^5 Ohm 왘 tips non-reflective brushed 왘 gripping surfaces mattfinished for optimum grip

Model 92 28 71 ESD: 왘 needle-pointed tips 왘 straight pattern 왘 smooth gripping surfaces

Model 92 08 78 ESD: 왘 for SMD-technology 왘 bent tips 왘 smooth gripping surfaces

Model 92 38 75 ESD: 왘 sickel-shaped tips 왘 smooth gripping surfaces

Model 92 08 79 ESD: 왘 shaped to grip horizontal cylindrical components of 1.0 mm dia. 왘 smooth gripping surfaces 왘 chequered handles Model 92 28 69 ESD: 왘 straight pattern 왘 strong tip 왘 smooth gripping surfaces

92 28 72 ESD

Model 92 28 70 ESD: 왘 straight pattern 왘 fine tip 왘 smooth gripping surfaces

Model 92 28 72 ESD: 왘 American shape, solid 왘 long tips 왘 straight pattern 왘 smooth gripping surfaces

Model 92 58 74 ESD: 왘 round tips, approx. 2 mm wide 왘 straight pattern 왘 smooth gripping surfaces Model 92 78 77 ESD: 왘 round tips, approx. 3.5 mm wide 왘 straight pattern 왘 serrated gripping surfaces 왘 chequered handles Model 92 88 73 ESD: 왘 rectangular tips, approx. 0.9 mm wide 왘 gripping surfaces with fine transverse serration

Precision Tweezers, insulated 왘 tested according IEC 60900 : 2004 왘 plastic dipped insulated 왘 nickel plated

Model 92 27 61: 왘 for ultra fine mounting work 왘 extra fine tips 왘 straight pattern 왘 gripping surfaces mattfinished for optimum grip

92 27 61

92 27 62

Model 92 27 62: 왘 straight pattern 왘 gripping surfaces with fine transverse serration

Model 92 37 64: 왘 bent tips 왘 gripping surfaces with fine transverse serration Model 92 67 63: 왘 straight pattern 왘 serrated gripping surfaces

92 67 63

92 37 64 * SMD-technology: technique for soldering surface mounted components on printed circuit boards without using holes.

86


Plastic Tweezer 왘 solid plastic tweezer 왘 trapezoidal tips, approx. 3.5 mm wide 왘 serrated gripping surfaces

왘 chequered handles 왘 heat resistant up to approx. 130° C

왘 universally applicable 왘 for efficient clamping 왘 nickel plated

Model 92 95 89: 왘 narrow tips 왘 straight pattern 왘 gripping surfaces with fine transverse serration 왘 handles with plastic attachement

92 69 84

Cross-Over Tweezers

92 94 91

92 95 89

Bestell-Nr.

92 95 90

9 EAN-

Model 92 94 91: 왘 trapezoidal tips 왘 straight pattern 왘 gripping surfaces with fine transverse serration 왘 chequered handles

4003773-

92 02 53 92 02 54 92 02 55 92 08 78 ESD 92 08 79 ESD 92 12 52 92 22 04 92 22 06 92 22 07 92 22 12 92 22 13 92 22 35 92 23 05 92 24 01 92 24 34 92 27 61 92 27 62 92 28 69 ESD 92 28 70 ESD 92 28 71 ESD 92 28 72 ESD 92 32 29 92 34 28 92 34 36 92 34 37 92 37 64 92 38 75 ESD 92 44 42 92 52 23 92 58 74 ESD 92 64 43 92 64 44 92 67 63 92 69 84 92 70 46 92 72 45 92 78 77 ESD 92 84 18 92 88 73 ESD 92 94 91 92 95 89 92 95 90

054603 054610 054627 054634 054641 054658 054665 054672 054689 054696 054702 054719 054726 054733 054740 054757 054764 054771 054788 054795 054801 054818 054825 054832 054849 054856 054863 054887 054894 054900 054917 054924 054931 054948 055075 054962 054979 054986 054993 055006 055013 055020



9 Ausführung

Code stainless, anti-magnetic stainless, anti-magnetic stainless, anti-magnetic, acid-proof stainless, anti-magnetic, ESD electrically dissipative stainless, anti-magnetic, ESD electrically dissipative stainless, anti-magnetic stainless, anti-magnetic stainless, anti-magnetic stainless, anti-magnetic, acid-proof stainless, anti-magnetic stainless, anti-magnetic, acid-proof stainless, anti-magnetic, acid-proof stainless, Titanium, anti-magnetic, acid-proof nickel plated nickel plated insulated and tested according to IEC 60900:2004 insulated and tested according to IEC 60900:2004 stainless, anti-magnetic, ESD electrically dissipative stainless, anti-magnetic, ESD electrically dissipative stainless, anti-magnetic, ESD electrically dissipative stainless, anti-magnetic, ESD electrically dissipative stainless, anti-magnetic stainless, anti-magnetic nickel plated black coated insulated and tested according to IEC 60900:2004 stainless, anti-magnetic, ESD electrically dissipative nickel plated stainless, anti-magnetic, acid-proof stainless, anti-magnetic, ESD electrically dissipative nickel plated nickel plated insulated and tested according to IEC 60900:2004 plastic black coated stainless, anti-magnetic, acid-proof stainless, anti-magnetic, ESD electrically dissipative nickel plated stainless, anti-magnetic, ESD electrically dissipative nickel plated nickel plated nickel plated

Länge mm 120 120 115 120 120 120 130 120 115 105 135 155 120 120 155 130 150 130 110 110 135 120 105 155 155 150 120 140 120 120 120 145 145 130 145 145 145 125 130 160 160 160

Model 92 95 90: 왘 narrow tips 왘 bent tips 왘 gripping surfaces with fine transverse serration 왘 handles with plastic attachement

15 15 15 20 15 20 20 15 15 20 20 25 10 15 20 30 35 20 15 15 20 20 10 25 25 35 15 20 15 20 15 25 40 5 25 30 30 20 20 35 30 30

87


94

94 Cutter for Plastic Pipes,

for the Electrical Installation 왘 for clean cutting of plastic pipes (e.g. plastic clad pipes) with 6 - 35 mm dia. 왘 not suitable for cutting cables 왘 blade is replaceable and can be retracted in any position 왘 low force requirement due to special blade geometry and optimum transmission 왘 minimum operator fatigue due to ergonomic handle design and ratchet blade feed in stages 왘 die-cast aluminium body, red lacquered

94 10 185

Ø 6-35 mm

Article-No. 9 EANLength mm

94 10 185 94 19 185

9 Capacity



ø mm 6.0 - 35.0

g 560 50

왘 blade made of tool steel, oil-hardened and tempered

Code 4003773-

047025 047032

spare blade for 94 10 185

94

94 Cutter for Ribbon Cables 왘 for crushing-free cutting of ribbon cable up to 56 mm width 왘 exchangeable cutting base with fence angle for rectangular cuts 왘 replaceable, conventional trapezoidal blade 왘 with opening spring and locking device 왘 handles and blade mounting made of high-strength special grade steel

94 15 215

Article-No. 9 EANLength mm

94 15 215 94 19 215

9 Head

9 Handles

9 Blade length



Code 4003773-

046011 046219

chrome plated spare blade

plastic coated

56 mm

g 345 50

89


94

94 Mitre Shears

for plastic and rubber sections 왘 for crushing-free cutting of plastic, rubber and soft timber section; also for ribbon cable up to 56 mm width 왘 exchangeable cutting base with fence angle for 45°-cuts and markings for 60°-, 75°and 90°- cuts 왘 replaceable, conventional trapezoidal blade 왘 with opening spring and locking device 왘 handles and blade mounting made of high-strength special grade steel

94 35 215

Article-No. 9 EANLength mm

94 35 215 94 19 215

9 Head

9 Handles



9 Blade Length

Code g 400 50

4003773-

046028 046219

chrome plated spare blade

95

95 Vinyl Shears,

plastic coated

56 mm

also for cable ducts 왘 special lever transmission 왘 new, very effective blade geometry 왘 head burnished, with twocolour dual component handles

patented

Model 95 02 10: 왘 for plastic material up to approx. 6.0 mm thickness (e.g. PE with 63 Shore)

95 02 10

High cutting performance for vinyl plates up to 6.0 mm thickness

Model 95 02 21: 왘 for cutting and shortening cable ducts, also for plastic material up to 4.0 mm thickness

95 02 21 Article-No. 9 EAN-

9 Cutting capacities

4003773-

95 02 10 95 02 21

90

047872 052128

mm 4.0 - 6.0 max. 4.0



9 Blade length

Code mm 60 110

Length mm 225 275

g 460 535

Blade length 110 mm for cutting wide cable ducts


95

95 Shears for KEVLAR® Fibres 왘 only for cutting fibres of KEVLAR® in optical fibre cables, not recommended for other materials 왘 precision grinding with serration prevents the fibres from slipping and guarantees a clean cut 왘 riveted precision joint, for low-friction movement and smooth and even cutting of the thin KEVLAR® fibres 왘 hard-chrome plated, ground surface 왘 user-friendly plastic handles 왘 body of shears oil-hardened and tempered

95 03 160 SB

Article-No. 9 EANLength mm

9 Head

9 Handles



Code 4003773-

95 03 160 SB 043362

chrome plated

plastic coated

95

g 80

Precision ground with fine toothing for clean, non-slip (nonskid) cut

95 Combination Shears 왘 combination shears for cutting cardboard, plastics, aluminium, brass and copper foils 왘 not suitable for steel wire or iron sheets 왘 precision ground, hardened blades 왘 with opening spring and locking device 왘 with guard 왘 adjustable screw joint 왘 blades made of stainless steel 왘 oil-hardened and tempered

95 05 140

Model 95 05 185: 왘 angled shape - for easy execution of long cuttings 왘 ergonomically shaped plastic handles

95 05 185

95 05 190

Article-No. 9 EANLength mm

95 05 140 165 190

9 Head

9 Handles



Code

g

4003773-

019589 060277 019602

bright polished

with plastic handles

50 110 120

KEVLAR® is a registered Trademark of E. I. du Pont de Nemours and Company

91


95

95 Cable Shear 왘 not suitable for steel wire and hard drawn copper conductors 왘 precision ground, hardened blades 왘 no crushing, slight deformation of the cable only 왘 with guard 왘 adjustable screw joint

95 05 165

95 06 230

Article-No. 9 EANLength mm

95 05 165 95 06 230

9 Head

9 Handles



9 Cutting Capacity

Code 4003773-

019596 006305

bright polished bright polished

with plastic handles plastic insulated VDE-tested

95

ø mm 10 16

mm2 24 50

AWG 3 1

g 115 275

Model 95 05 165: 왘 cable shears for universal use; cuts cables up to 10 mm dia. / 24 mm2 왘 with opening spring and locking lever 왘 blades made of stainless steel 왘 oil-hardened and tempered Model 95 06 230: 왘 for copper conductors single wire up to 16 mm2, multiple wire up to 50 mm2, fine strand up to 70 mm2 and aluminium conductors multiple wire up to 70 mm2 왘 easy cutting with one-hand operation due to high transmission ratio 왘 stainless - special grade - steel, oil hardened and tempered 왘 VDE tested according to DIN EN/IEC 60900

95 Cable Shears 왘 for cutting copper and aluminium cables, single and multiple wire 왘 not suitable for steel wire and hard drawn copper conductors 왘 precision ground, hardened blades 왘 clean and smooth cut without crushing and deformation 왘 easy cutting with one-hand operation 왘 with guard 왘 adjustable screw joint, self-locking 왘 forged 왘 Vanadium steel, oil-hardned and tempered

95 11 165

95 12 165

Model 95 11/12 165: 왘 universal use for dismantling and stripping

Cut performed with a Diagonal Cutter: high effort required, inaccurate cut, considerable deforming and crushing of the cable

95 16 165

Article-No. 9 EANLength mm

9 Head



9 Cutting capacity

Code 4003773-

95 11 165 95 12 165

029175 029182

burnished burnished

95 16 165

039648

chrome plated

92

9 Handles

plastic coated with two-colour dual component handles insulated with two-colour dual component handles VDE-tested

ø mm 15 15

mm2 50 50

AWG 1/0 1/0

g 210 245

15

50

1/0

255

Cut effected with a Cable Shear: easy, clean cut without any deformation of the cable


95

95 Cable Shears

with twin cutting edge 왘 for cutting copper and aluminium cables, single and multiple wire 왘 not suitable for steel wire and hard drawn copper conductors 왘 precision ground, hardened blades 왘 clean and smooth cut without crushing and deformation 왘 easy cutting with one-hand operation 왘 initial and final cut (upper and lower blade) allows cables of up to 20 mm dia. to be cut 왘 low handforce required due to favourable lever ratio and new blade geometry 왘 with guard 왘 adjustable screw joint, self-locking 왘 forged 왘 special tool steel, oil-hardened and tempered

patented

95 11 200

95 12 200

95 16 200

Article-No. 9 EANLength mm

9 Head

9 Handles

KNIPEX Cable Shears with twin cutting edge are designed for cutting cables up to 20 mm dia.. Even in case of large cable cross sections handles are always in a favourable position due to initial and final cut.



9 Cutting capacity

Code 4003773-

95 11 200 95 12 200

026754 047834

burnished burnished

95 16 200

026761

chrome plated

95 17 200

026952

chrome plated

plastic coated with two-colour dual component handles insulated with two-colour dual component handles VDE- tested plastic dipped insulated VDE- tested

ø mm 20 20

mm2 70 70

AWG 2/0 2/0

g 295 345

20

70

2/0

345

20

70

2/0

380

Initial cut Final cut

Initial cut: using the upper cutting edge, an ergonomic handle opening is guaranteed even in case of large cable diameters

Final cut: if higher handforce is required, an additional cut can be done with the cutting edge profile near the joint. Initial cut with the upper cutting edge – final cut with the lower cutting edge

93


95

95 Cable Shears 왘 for cutting copper and aluminium cables, single and multiple wire 왘 not suitable for steel wire and wire ropes 왘 precision ground, hardened blades 왘 clean and smooth cut without crushing and deformation 왘 low handforce required due to favourable lever ratio and new blade geometry 왘 short design, length only 500 mm 왘 low weight 왘 with guard 왘 adjustable screw joint 왘 cutter head forged from Vanadium steel, oil-hardened and tempered 왘 handles made of high resistant aluminium pipes

95 11 500

The Cable Shears in compact and low weight construction (up to 1,000 g less in weight than comparable cable shears) for cable diameters up to 27 mm. Easy and clean cut due to high lever transmission and optimum blade geometry.

Requires 32% less effort Cutting a multiple wire cable 5 x 50 mm2 with these high transmission KNIPEX Cable Shears (length 500 mm) requires handforce of only 560 N (56.0 kp) instead of 830 N (83.0 kp) with Cable Shears 95 21 600 (length 600 mm).

Large cutting capacity: max. 27 mm dia./150 mm2

Article-No. 9 EANLength mm

95 11 500 95 17 500

9 Head

9 Handles



9 Cutting capacity

Code 4003773-

026778 026785

polished polished

with plastic handles plastic dipped insulated VDE-tested

95

ø mm 27 27

mm2 150 150

AWG 5/0 5/0

g 1090 1360

95 Cable Shears 왘 for cutting copper and aluminium cables, single and multiple wire 왘 not suitable for steel wire and wire ropes 왘 precision ground, hardened blades 왘 clean and smooth cut without crushing and deformation 왘 favourable transmission ratio due to double lever

95 21 600

Article-No. 9 EANLength mm

9 Handles

4003773-

95 21 600 95 27 600

025252 021797

95 29 600

021803

94

9 Head



9 Cutting capacity

Code polished polished

with plastic handles plastic dipped insulated VDE-tested spare cutter head

ø mm 27 27

mm2 150 150

AWG 5/0 5/0

g 2055 2300 365

왘 왘 왘 왘

with guard adjustable screw joint replaceable, forged cutter head cutter head made of special tool steel, oil-hardened and tempered


95

95 Cable Cutters,

Ratchet Action 왘 for cutting copper and aluminium cables, single and multiple wire 왘 not suitable for steel wire and wire ropes 왘 precision ground, hardened blades 왘 clean and smooth cut without crushing and deformation 왘 one-hand operation using ratchet principle 왘 little handforce required due to optimum transmission ratio 왘 two-stage ratchet drive for easy cutting 왘 simple handling as a result of low weight and compact design - can be used even in confined areas 왘 with guard 왘 special grade tool steel

patented

95 31 250

95 36 250

Cutting thicker cables usually requires a high handforce. KNIPEX Ratchet Cable Cutters facilitate this work by means of a two-stage ratchet drive and a handle with support (model 95 31). The cable cutter can be rested on a solid ground so that additional body weight can be applied to lower arm musculature fatigue.

Model 95 31: 왘 fixed handle with support area for putting down the plier when cutting Models 95 31/36 280: 왘 suitable for aluminium sector cable up to 4 x 150 mm2

95 31 280

Article-No. 9 EANLength mm

9 Head

9 Handles

9 Cutting capacity



Code 4003773-

95 31 250 280 95 36 250 280

043935 043942 026884 026891

95 39 250 95 39 280

022244 025283

lacquered

with two-colour dual component handles lacquered insulated with two-colour dual component handles VDE-tested spare moving blade spare moving blade

95 31 280: large cutting capacity: maximum 52 mm dia. / 380 mm2

ø mm 32 52 32 52

mm2 240 380 240 380

MCM 500 750 500 750

g 575 750 560 735 130 260

Ratchet principle and two-stage ratchet drive for easier cutting.

95


95

95 Cable Cutters,

Ratchet Action 왘 for cutting copper and aluminium cables, single and multiple wire - also with hard rubber or plastic sheath 왘 not suitable for steel wire and wire ropes 왘 also suitable for cables with iron sheath reinforcement 왘 precision ground, hardened blades 왘 clean and smooth cut without crushing and deformation 왘 little handforce required for cutting due to optimum transmission ratio 왘 high cutting capacity due to two-hand operation and ratchet action

95 31 720

Article-No. 9 EANLength mm

95 31 720 870 95 39 720 870

9 Head

9 Handles



9 Cutting capacity

Code 4003773-

025269 025276 025290 025306

lacquered

powder coated, with plastic handles spare moving blade

95

ø mm 60 100

mm2 740 960

MCM 1400 1900

g 5370 7090 595 1340

95 Wire Rope Cutter 왘 for medium hard wire up to 6 mm dia., e.g. Bowden cords, but also for cables and steel rods 왘 with opening spring and locking device 왘 cutting edges additionally induction hardened 왘 special blade geometry prevents the wire rope fanning out

95 61 190

Fe Article-No. 9 EANLength mm

95 61 190

96

왘 the blade can be opened in any cutting position 왘 suitable for working in confined areas 왘 blades made of special tool steel, oil-hardened and tempered 왘 handles made of steel tubing

9 Head

9 Handles

9 Cutting capacities Fe

Code 4003773-

019640



polished

plastic coated

mm2 10

ø mm 6

ø mm 4

g 315

95 31 870: Large cutting capacity: maximum 100 mm dia. / 960 mm2


95

95 Wire Rope and Cable Cutters 왘 for wire ropes and steel rods, copper and aluminium cables 왘 suitable for cutting overhead cables with strain relief wire 왘 angular cutting blades allow cutting of single rope wire 왘 optimum transmission ratio for high cutting performance 왘 low weight 왘 replaceable cutter head 왘 high-strength aluminium handles

95 71 600

왘 cutter head made of special grade tool steel, oil-hardened and tempered Model 95 81 600: 왘 with reinforced cutter head for higher performance, also cuts piano wire

Fe Article-No. 9 EANLength mm

9 Head

9 Handles

9 Cutting capacities



Fe

Code 4003773-

95 71 445 600 95 77 600

014522 014539 025313

polished

95 79 445 600 95 81 600 95 89 600

025320 025337 025344 025351

polished with plastic handles spare cutter head

polished

with plastic handles

plastic dipped insulated VDE-tested spare cutter head

mm2 95 150 150

ø mm 10 14 14

ø mm 7 9 9

AWG g 3/0 1100 5/0 1750 5/0 2250

150

16

10

5/0 2280

97


Do visit our website particularly for crimping details: www.crimping.info


97

97 Crimp Grip Pliers 왘 for solder-free electrical connections 왘 quick release lever 왘 high contact pressure with minimum handforce using toggle lever transmission 왘 reproducible crimping quality with high tensile strength because of zero point lock 왘 adjustable crimping pressure 왘 high strength special grade steel

97 00 215 A

Model 97 00 215 D: 왘 crimps conductor and insulation in one single operation

Article-No. 9 EANLength mm

9 Head

9 Handles

9 Range of Application



9 Capacity

Code 4003773-

97 00 215 A 006497

burnished

burnished

97 00 215 B 006503

burnished

nickel plated

97 00 215 D 006527

burnished

burnished

mm2 insulated terminals 0.5 - 6.0 and plug connectors non-insulated open 0.5 - 6.0 plug-type connectors (6.3 mm) insulated terminals 0.5 - 6.0 and plug connectors

97

AWG 20 -10

g 530

20 -10

525

20 -10

525

97 Crimping Pliers 왘 for cutting cables, stripping wire and crimping insulated and non-insulated terminals, connectors and plug type connectors 왘 with threaded holes for cutting copper and brass screws threaded M 2.6; 3.0; 3.5; 4.0 and 5.0 mm 왘 high strength special grade steel

97 21 215

Article-No. 9 EANLength mm

97 21 215

9 Head

9 Handles

9 Range of Application



9 Capacity

Code 4003773-

019688

burnished

97 21 215 B 019695

burnished

97 21 215 C 019701

burnished

with plastic handles with plastic handles with plastic handles

mm2 insulated terminals 0.75 - 6.0 and plug connectors non-insulated open 0.5 - 2.5 plug-type connectors (6.3 mm) non-insulated 0.5 - 6.0 terminals and plug connectors

AWG 18 -10

g 235

20 -13

240

20 -10

225

www.crimping.info

99


97

97 Crimping Plier 왘 for cutting cables, stripping wire and crimping insulated and non-insulated terminals and connectors 왘 with threaded holes for cutting copper and brass screws threaded M 2.6; 3.0; 3.5; 4.0 and 5.0 mm 왘 high strength special grade steel

97 32 225

Article-No. 9 EANLength mm

97 32 225

9 Head

9 Handles

9 Range of Application



9 Capacity

Code 4003773-

019718

burnished

with plastic handles

insulated terminals and plug connectors non-insulated terminals and plug connectors

97

mm2 0.5 - 6.0

AWG 20 -10

0.5 - 2.5

20 -13

g 240

97 Insertion Tool for LSA-Plus and identical 왘 tool for putting on boards, sockets and fields 왘 pushing down and cutting in one operation 왘 for UTP and STP cables, conductor 0.4 - 0.8 mm dia. 왘 with integrated pulling hook and release blade 왘 plastic body

97 40 10

Insertion tool to connect without having to strip

Article-No. 9 EAN-

9 Body

Putting down and cutting the cable in one operation

9 Range of Application

Code 4003773-

97 40 10

100

044895

plastic

www.crimping.info

UTP- and STP-cables, LSA-Plus and identical



9 Capacity ø mm 0.4 - 0.8

Length mm 175

g 95


97

97 Lever Action Crimping Pliers

for shielded Western Plugs 왘 for crimping shielded Western Plugs 왘 for solder-free electrical connections 왘 all operations are made in one single connector position 왘 almost parallel crimping performance 왘 repetitive, high crimping quality due to precision dies and integral lock (self-releasing mechanism) 왘 these tools have been set precisely (calibrated) in the factory 왘 optimum transmission of force due to lever action for fatigue-reduced operation 왘 ergonomically designed handles 왘 all stressed parts are made of special steel, oil-hardened and tempered 왘 head burnished; with plastic handles

97 43 74 Molex

KNIPEX Lever Action Crimping Pliers are coordinated to the special requirements for crimping Western Plugs of AMP and Molex. Particularly user friendly: all crimping steps are carried out in a single operating cycle.

97 43 78 AMP

Article-No. 9 EAN-



9 Range of Application

Code

Length

4003773-

mm

g

215

1145

215

1145

97 43 74

043294

97 43 78

047698

shielded Molex connectors shielded AMP connectors EMT

www.crimping.info

101


97

97 Crimp System Pliers

with exchangeable crimp profiles

97 43 200 with crimp profile 97 49 06

Model 97 43 200: 왘 Crimp System Plier 97 43 200 with service tools (hexagonal key, open jaw wrench, screws and nuts) in a plastic case. Foam insert with recesses for crimp profiles and locators. Model 97 43 05/06: 왘 with fixed crimp profile; in cardboard packaging

왘 for solder-free electrical connections 왘 almost parallel crimping performance 왘 repetitive, high crimping quality due to precision dies and integral lock (self-releasing mechanism) 왘 these tools have been set precisely (calibrated) in the factory 왘 optimum transmission of force due to lever action for fatigue-reduced operation 왘 ergonomically designed handles 왘 wide range of different crimp profiles for nearly all common crimp connections (see Art. No. 97 49..) 왘 further special profiles on request 왘 different locators for precise positioning of the connectors 왘 all stressed parts are made of special steel, oil-hardened and tempered 왘 head burnished; with plastic handles

97 43 200

Article-No. 9 EAN-

9 Range of applications



9 Capacity

Code 4003773-

97 43 200

030812

see crimp die profile table

97 43 05

031031

97 43 06

031048

Crimp System Plier for non-insulated open plug-type connectors Crimp System Plier for insulated terminals and plug connectors

Crimp System Plier 97 43 200 with crimp profile 97 49 30 for noninsulated butt connectors

102

www.crimping.info

Crimp System Plier 97 43 200 with crimp profile 97 49 35 for spark plug connectors

mm2

AWG

Length mm g 200 970

0.5 - 6.0

20 -10

200

615

0.5 - 6.0

20 -10

200

615

Crimp System Plier 97 43 200 with crimp profile 97 49 24 for D-Sub plugs

Nearly all common crimp connections can be realized with the KNIPEX Crimp System Plier simply by exchanging the crimping dies. This comfort represants hand crimping technology at the state-of-the-art and optimum crimping results.

Crimp System Plier 97 43 200 with crimp profile 97 49 61 and locator 97 49 90 for turned contacts with different pin diameters, swivelling


97

97 Crimp Profiles and Locators Crimp die profil 0 Article-No. 0

0 EAN-Code 0

for Crimp System Pliers

0 Applications 0

0 Capacity 0

4003773-

0 0



AWG

g

27-13 20-10 20-10

50 55 55

7/5

50

97 49 04 97 49 05 97 49 06

030850 030867 030836

non-insulated open plug-type connectors 2.8 + 4.8 mm 0.1 - 2.5 mm2 non-insulated open plug-type connectors 4.8 + 6.3 mm 0.5 - 6.0 mm22 insulated terminals and plug connectors 0.5 - 6.0 mm2

97 49 16

040675

insulated terminals and plug connectors

10 / 16 mm2

97 49 08 97 49 09 97 49 19

030874 030881 030898

end sleeves (ferrules) end sleeves (ferrules) end sleeves (ferrules)

0.5 - 6.0 mm2 10 / 16 / 25 mm2 35 / 50 mm2

20-10 7/5/3 2/0

55 55 65

97 49 13 97 49 23 97 49 15

030843 052135 046164 045212

97 49 24

030911

0.5 - 10 mm2 20-7 16 + 25 mm2 5+3 1.25 - 2.5 mm2 16-10 3 - 4 / 4 - 6 mm2 12-10 Ø 9.6 / SW 8.4 + 8.1 mm; Ø 7.8 / SW 7.0 mm 0.03 - 0.56 mm2 32-20

55 55 55

97 49 20

non-insulated terminals and plug connectors non-insulated terminals and plug connectors lug connectors and non-insulated plug connectors 4.8 + 6.3 mm F-connectors for TV and satellite connectors D-Sub-plugs

97 49 30

030904

non-insulated butt connectors

1.5 - 10 mm2

55

97 49 35

034315

spark plug connectors + distributors

97 49 40 97 49 50 97 49 44

030959 030966 041443

Coax connectors Coax connectors/Car phone rolled contacts

RG 58,59,62,71,223 RG 58,174,188,316 0.14 - 1.5 mm2

26-15

60 60 50

97 49 54

041450

modular plugs

0.5 - 2.5 mm2

20-13

55

97 49 60 97 49 61 97 49 64

030928 045137 044055

turned contacts (HTS + Harting) turned contacts (Harting) ABS connectors

0.14 - 4.0 mm2 1.5/2.5/4.0/6.0 mm2 – 2.5 / – 6.0 mm2

26-11 15/13/12/10 – 13 / – 10

55 55 60

97 49 70

030942

unshielded Western plugs

97 49 74

044062

unshielded Molex plugs

4/6/8-poles RJ 10, 11, 12, 45 8-poles RJ 12 / RJ 45

97 49 76

047513

shielded Stewart plugs

97 49 81

042778

97 49 82

042792

97 49 83

044079

97 49 84

042792

97 49 87

043331

97 49 90

031017

Harting connectors for fibre optics Telegärtner connectors for fibre optics ST-, SC- + STSC/K-plugs for fibre optics Harting/Suhner connectors for fibre optics MIC connectors for fibre optics Locator for 97 49 60 (HTS + Harting)

97 49 91 97 49 93 97 49 94

045144 047926 030997

Locator for 97 49 61 (Harting) Locator for 97 49 24 (D-Sub-plugs) Locator for 97 49 04

70 70 20

97 49 95

031000

Locator for 97 49 05

20

15-7

55 45

55

60 55 50

SW 3.0 / Ø 3.5; SW 4.95 / Ø 6.0; SW 6.5 / Ø 7.5 SW 3.25 / Ø 3.6; SW 3.65 / Ø 4.0; SW 4.52 / Ø 5.4 SW 3.65 / Ø 4.1; SW 4.2 / Ø 4.6; SW 5.0 / Ø 6.0 SW 3.8 / Ø 4.5; SW 4.3 / Ø 5.2; SW 4.95 / Ø 6.0 SW 8.7 / Ø 9.5

55 55 55 55 50 70

up to 250 different die profiles available; special profiles on request www.crimping.info

103


97

97 Crimping Plier

for Scotchlok Connectors, with side cutter 왘 for crimping plastic-insulated telecommunication or signal cables using the U-contact principle in single Scotchlok connectors 왘 no stripping necessary, U-shaped elements make the connection 왘 cutting edges additionally induction hardened 왘 with opening spring

97 50 01

Article-No. 9 EAN-

9 Style 9 Head 9 Handles

9 Range of Application

9 Capacity

Code ø mm 0.4 - 1.1

4003773-

97 50 01

028239

polished plastic coated

97

97 Crimping Plier

Scotchlok single

왘 Vanadium steel, oil-hardened and tempered U-contact

conductor insulation

 Length mm g 155 135

for Western Plugs 왘 for cutting and stripping unshielded ribbon telephone cables 왘 for crimping 4-pole Western plugs type RJ 10 (7.65 mm wide) 왘 head burnished, with plastic handles

97 51 04

Cut cables 4-poles

Article-No. 9 EAN-

9 Range of Application



9 Capacity

Code 4003773-

97 51 04 97 59 06

028048 029700

Western plugs RJ 10 (4-poles) 7.65 mm 4 spare blades for 97 51 04 / 10 / 12

97

97 Crimping Plier

Crimp Western plugs

왘 professional tool for cutting and stripping unshielded ribbon telephone cables 왘 for crimping 6- and 8-pole Western plugs type RJ 11/12 (9.65 mm width) and type RJ 45 (11.68 mm width) 왘 exact crimping process due to parallel crimping 왘 repetitive, high crimping quality due to integral lock (self-releasing mechanism)

왘 optimum transmisson of force due to lever action for fatigue-reduced operation 왘 with length cutter and dismantling knife for ribbon cables 6 and 12 mm length 왘 with additional stripping device for round cables 왘 head burnished, with twocolour dual component handles

8-poles

Article-No. 9 EAN-

9 Range of Application

9 Capacity

Code 4003773-

97 51 10

043171

Western plugs

97 59 06

029700

4 spare blades for 97 51 04 / 10 / 12

104

Strip cables

for Western Plugs

97 51 10

6-poles

Length mm g 190 230

www.crimping.info

RJ 11/12 (6-poles) 9.65 mm; RJ 45 (8-poles) 11.68 mm

 Length mm g 190 300

Precise, clean crimping


97

97 Crimping Plier

for Western Plugs 왘 professional tool for cutting and stripping unshielded ribbon telephone cables 왘 for crimping 4-, 6- and 8-pole Western plugs type RJ 10 (7.65 mm width), type RJ 11/12 (9.65 mm width) and type RJ 45 (11.68 mm width) 왘 exact crimping process due to parallel crimping 왘 repetitive, high crimping quality due to integral lock (self-releasing mechanism)

97 51 12

4-poles

6-poles

왘 optimum transmisson of force due to lever action for fatigue-reduced operation 왘 with length cutter and dismantling knife for ribbon cables 6 and 12 mm length 왘 head burnished, with twocolour dual component handles

8-poles

Article-No. 9 EAN-

9 Range of Application



9 Capacity

Code 4003773-

97 51 12

043188

Western plugs

97 59 06

029700

4 spare blades for 97 51 04 / 10 / 12

RJ 10, (4-poles) 7.65 mm RJ 11/12 (6-poles) 9.65 mm RJ 45 (8-poles) 11.68 mm

97

97 Four-Mandrel Crimping Pliers

Crimping Plier with cutting and dismantling device

for turned contacts 왘 for crimping turned contacts 왘 for solder-free electrical connections 왘 four-mandrel crimping for exact crimping performance 왘 mandrel gauge to check the basic setting 왘 locator for positioning the contacts 왘 repetitive, high crimping quality due to integral lock (self-releasing mechanism) 왘 these tools have been set precisely (calibrated) in the factory 왘 optimum transmisson of force due to lever action for fatigue-reduced operation 왘 high operation comfort thanks to handy shape 왘 all stressed parts are made of special steel, oil-hardened and tempered

97 52 64

97 52 65

Article-No. 9 EAN-

Length mm g 200 530

9 Range of Application

Model 97 52 64: 왘 pressure adjustment depending on the conductor's diameter by means of adjusting wheel in 4 different positions 왘 nickel plated head, two-colour dual component handles Model 97 52 65: 왘 fine adjustment of pressure depending on the conductor's diameter by means of adjusting wheel 왘 nickel plated head, plastic handles



9 Capacity

Code AWG 28 - 13

Length mm g 180 370

97 52 63

050148

turned contacts

mm2 0.08 - 2.5

97 52 64

041481

turned contacts

0.08 - 2.5

28 - 13

180

415

97 52 65

045236

turned contacts (Harting)

0.14 - 6.0

26 - 10

230

680

4003773-

Model 97 52 63: 왘 fine adjustment of pressure depending on the conductor's diameter by means of adjusting wheel 왘 nickel plated head, two-colour dual component handles

Four-mandrel squeezing for exact crimping performance

www.crimping.info

105


97

97 Lever Action Crimping Pliers,

also for two-hand operation 왘 new generation of lever action crimping pliers 왘 for solder-free electrical connections 왘 the new lever transmission reduces the handforce up to 30% compared with regular crimping pliers 왘 repetitive, standard conforming high crimping quality due to precision dies and integral lock (self-releasing mechanism) 왘 these tools have been set precisely (calibrated) in the factory 왘 two-hand operation for easy crimping of large conductor diameters 왘 easy handling as a result of well balanced centre of gravity, angled head and ergnomically shaped handles 왘 all stressed parts are made of special steel, oil-hardened and tempered 왘 head burnished, non-slip plastic coated handles

97 52 03

97 52 04

With the new generation of Crimping Pliers even large conductor cross sections that normally require a high handforce can be crimped easily. The new lever transmission reduces the necessary handforce up to 30% compared with regular crimping pliers.

First step: move the handle with two fingers only until both jaws touch the connector to be crimped

97 52 06

97 52 09

Article-No. 9 EAN-

9 Range of Application

97 52 10



9 Capacity

Code 4003773-

97 52 03

025443

97 52 13 97 52 23 97 52 04

048084 052159 025450

97 52 05 97 52 06

025467 025474

97 52 08 97 52 09 97 52 19 97 52 10

025481 025498 052142 023678

97 49 94 97 49 95 106

030997 031000

www.crimping.info

non-insulated terminals and plug connectors

non-insulated, open plug-type connectors insulated terminals and plug connectors end sleeves (ferrules) COAX-, BNC- and TNC- connectors, RG 58 RG 59/62/71/223 locator for Art.-No. 97 52 04 locator for Art.-No. 97 52 05

mm2 AWG 4.0 - 10.0 11 - 7

Length mm g 250 565

0.5 - 10.0 20 - 7 16 + 25 5+3 0.1 - 2.5 27 - 13

250 250 250

565

0.5 - 6.0 0.5 - 6.0

20 - 10 20 - 10

250 250

570 560

0.5 - 6.0 10/16/25 35 + 50

20-10 7/5/3 2+0

250 250 250 250

575 570 575 575

Second step: now use the whole hand for further crimping procedure

570

20 20

Third step: when greater handforce is required, such as e. g. when crimping insulated connectors 6.0 mm2, two hand operation is possible by the longer handles


97

97 Crimping Pliers “PreciForce“ 왘 for solder-free electrical connections 왘 repetitives, high crimping quality due to precision dies and integral lock (self-releasing mechanism) 왘 these tools have been set precisely (calibrated) in the factory 왘 high transmission of force thanks to lever action for fatigue-reduced working

97 52 36

Article-No. 9 EAN-

9 Range of Application



9 Capacity

Code 4003773-

97 52 30

051855

97 52 33

051862

97 52 34 97 52 35

051879 051886

97 52 36

051893

97 52 38

051909

97 52 50

051916

97 49 94 97 49 95

030947 031000

non-insulated butt connectors non-insulated terminals and plug connectors non-insulated open plug-type connectors 2.8+4.8 mm / 2.8+6.3 mm insulated terminals and connectors end sleeves (ferrules) COAX-BNCconnectors RG 58, 174, 188, 316 locator for 97 52 34 locator for 97 52 35

97

mm2 AWG 1.5 - 10.0 15 - 7

Length mm g 220 490

0.5 - 10.0 20 - 7

220

490

0.1 - 2.5 0.5 - 6.0

27 - 13 20 - 10

220 220

490 490

0.5 - 6.0

20 - 10

220

490

0.5 - 6.0

20 - 10

220

490

220

490

The new Crimping Pliers provide an amazingly high leverage despite the compact size and very good handling particularly favourable for larger crimp cross sections.

왘 good handling thanks to favourable handle position, low weight, short design and ergonomically shaped handles 왘 all stressed parts are made of special steel, oil-hardened and tempered 왘 head burnished, with twocolour dual component handles

97 Lever Action Crimping Pliers 왘 for solder-free electrical connections 왘 repetitives, high crimping quality due to precision dies and integral lock (self-releasing mechanism) 왘 these tools have been set precisely (calibrated) in the factory 왘 high transmission of force thanks to lever action for fatigue-reduced working

97 52 14

Article-No. 9 EAN-

9 Range of Application



9 Capacity

Code 4003773-

97 52 14

026808

97 52 20

026853

97 59 14

026974

mm2 0.10 - 1.5

non-insulated open plug-type connectors 2.8+4.8 mm COAX- BNC- and TNC- connectors SW 1.72 mm for conductors, shield 5,4 mm for RG 58, shield 6,48 mm for RG 59/62/71/223 locator for 97 52 14

AWG 27 - 15

Length mm g 195 375

195

왘 good handling due to 20° angled head, low weight and short design 왘 all stressed parts are made of special steel, oil-hardened and tempered Model 97 52 14: 왘 available as accessory: locator for non-insulated plug connectors

375

20

www.crimping.info

107


97

97 Self-Adjusting Crimping Pliers

for End Sleeves (ferrules) 왘 for crimping end sleeves (ferrules) according to DIN 46228 parts 1 + 4 왘 for solder-free electrical connections 왘 lateral loading of the end sleeves (ferrules) into the tool 왘 simple handling as a result of self-adjustment to the size of the end sleeve (ferrule) 왘 repetitive, high crimping quality due to integral lock (self-releasing mechanism) 왘 these tools have been set precisely (calibrated) in the factory 왘 optimum transmisson of force due to lever action for fatigue-reduced operation 왘 high operation comfort thanks to handy shape and low weight 왘 all stressed parts are made of special steel, oil-hardened and tempered

with lateral access, patented

97 53 04 square crimp 0.08 - 10.0 mm2

97 53 14

The Self-Adjusting Crimping Plier for end sleeves (ferrules) adjusts automatically to the connector size desired in one profile. This means comfortable, reliable and fast crimping.

Model 97 53 04: 왘 square crimping for optimum contact areas in the clamp connection Model 97 53 14: 왘 heaxagonal crimping for optimum positioning in confined areas

hexagonal crimp 0.08 - 6.0 mm2

Article-No. 9 EAN-

9 Range of Application



9 Capacity

Code 4003773-

97 53 04

028017

97 53 05

028277

will be replaced by Art.-No. 97 53 04

97 53 14

041474

end sleeves (ferrules) end sleeves (ferrules) end sleeves (ferrules)

mm2 0.08 - 10

AWG 28 - 7

Length mm g 180 380

0.75 - 10

18 - 7

180

400

0.08 - 6.0

28 - 10

180

400

Square-crimped end sleeves (ferrules) ensure good contact zones regardless of the position in the terminal connector

The section shows clearly that the square crimping produces a better contact than the trapezoidal crimping. The hexagonal crimping comes close to the space saving round shape and guarantees optimum contact in narrow round terminal connectors, in contrast to square crimping of the same cross-section

108

www.crimping.info


97

97 Self-Adjusting Crimping Pliers

for End Sleeves (ferrules) 왘 for crimping end sleeves (ferrules) according to DIN 46228 parts 1 + 4 왘 for solder-free electrical connections 왘 front loading of the end sleeves (ferrules) into the tool 왘 simple handling as a result of self-adjustment to the size of the end sleeve (ferrule) 왘 with square crimping for optimum contact areas in the clamp connection 왘 repetitive, high crimping quality due to integral lock (self-releasing mechanism) 왘 these tools have been set precisely (calibrated) in the factory 왘 optimum transmisson of force due to lever action for fatigue-reduced operation 왘 high operation comfort thanks to handy shape and low weight 왘 all stressed parts are made of special steel, oil-hardened and tempered

with front loading, patented

97 53 08 square crimp 0,08 - 10,0 mm2

97 53 09

square crimp

The Self-Adjusting Crimping Plier for end sleeves (ferrules) with front and lateral loading allows secure and comfortable working even in confined areas.

Model 97 53 08: 왘 crimping from 0.08 - 10.0 mm2 in one profile 왘 end sleeves (ferrules) up to 2.5 mm2 can also be loaded parallely from the side Model 97 53 09: 왘 crimping from 0.08 - 10.0 and 16.0 mm2 in one profile 왘 with selector lever for setting the crimping area either to 0.08 - 10 mm2 or 16 mm2

0,08-10,0 +16 mm2

Article-No. 9 EAN-

9 Range of Application



9 Capacity

Code 4003773-

97 53 08

040187

97 53 09

044550

Front loading of end sleeves (ferrules) e. g. in switchboards

end sleeves (ferrules) end sleeves (ferrules)

97 53 08: Lateral loading of end sleeves (ferrules) e. g. in confined areas

mm2 0.08 - 10.0

AWG 28 - 7

Length mm g 190 475

0.08 - 10.0 +16 28 - 7+5 190 475

Square crimping for optimum contact zones

www.crimping.info

109


97

97 Parallel Crimping Plier,

for Micro Plugs 왘 parallel crimping performance to satisfy the particularly high standards of small connectors 왘 for solder-free electrical connections 왘 repetitive, high crimping quality due to precision dies and integral lock (self-releasing mechanism) 왘 fixed locator for D-Sub micro plugs for an exact positioning of connector and cable

97 54 24

Article-No. 9 EAN-

9 Head

9 Handles



9 Range of Application 9 Capacity

Code

Length

4003773-

97 54 24

019787

왘 these tools have been set precisely (calibrated) in the factory 왘 optimum transmission of force due to toggle lever for fatigue-reduced operation 왘 crimping pliers for other mini plucs as e. g. HD 22, Modu IV, Micro Timer, MQS, .. on request 왘 all stressed parts are made of special steel, oil-hardened and tempered

polished

with two-colour turned contacts dual component handles

97

mm2 0.03-0.56

AWG

32-20

190

g 265

97 Crimping Pliers for End Sleeves (ferrules) 왘 for crimping end sleeves (ferrules) according DIN 46228 parts 1 + 4 in an area of application from 0.25 up to 2.5 mm2 왘 crimping in marked halfround dies for secure connections between the sleeve and the conductor 왘 Vanadium steel, oil-hardened and tempered

97 62 145 A

Article-No. 9 EANLength mm

9 Style

9 Head



9 Handles 9 Range of Application 9 Capacity

Code 4003773-

97 61 145 A 024149

polished

97 61 145 F

027218

polished

97 62 145 A 060154

polished

plastic coated plastic coated two-colour dual component

end sleeves (ferrules) end sleeves (ferrules) end sleeves (ferrules)

97

mm2 0.25 - 2.5

AWG

23 - 13

g 140

0.25 - 2.5

23 - 13

140

0.25 - 2.5

23 - 13

165

97 Crimping Pliers for End Sleeves (ferrules) 왘 for crimping end sleeves (ferrules) according DIN 46228 parts 1 + 4 from 0.25 to 16 mm2 왘 crimping in marked halfround dies for secure connections between the sleeve and the conductor

97 72 180

Article-No. 9 EANLength mm

9 Head

9 Range of Application

4003773-

97 71 180

019787

polished

97 72 180

060195

polished

110

9 Handles



9 Capacity

Code

www.crimping.info

plastic coated two-colour dual component

end sleeves (ferrules) end sleeves (ferrules)

mm2 0.25-16.0

AWG

23-5

g 265

0.25-16.0

23-5

305

왘 9 extremely deep troughs with conical side faces 왘 special tool steel, oil-hardened and tempered


97

97 Crimping Plier for End Sleeves (ferrules) with front loading 왘 for crimping end sleeves (ferrules) according DIN 46228 parts 1 + 4 from 0.5 to 6.0 mm2 왘 ideal for work in confined areas, e.g. in narrow and deep switch boxes 왘 special tool steel, oil-hardened and tempered

97 81 180

Article-No. 9 EANLength mm

97 81 180

9 Head

9 Handles

9 Range of Application



9 Capacity

Code 4003773-

019794

polished

plastic coated

end sleeves (ferrules)

mm2 0.5 - 6.0

AWG 20 - 10

g 240

front view

97

97 Crimp Assortments with Plier 왘 in a sturdy metal box 왘 with an assortment of standard cable connectors Model 97 90 00: 왘 with Crimp Grip Plier 97 00 215 A Model 97 90 01: 왘 with Crimping Plier 97 32 225

Connectors see page 113

97 90 00 Article-No. 9 EAN-

9 Crimping Plier

9 25 Terminals each



Code 4003773-

97 90 00 97 90 01

025375 025382

No. 97 00 215 A No. 97 32 225

style and description as per Article-No. 97 99 - 01/02/04/07/09/14/16/ 17/20/21/34/35/37/38

g 2165 1995

www.crimping.info

111


97

97 Assortments of End Sleeves (ferrules) with Plier 왘 in a sturdy metal box 왘 with an assortment of end sleeves (ferrules) with/without collar

Model 97 90 05: 왘 end sleeves (ferrules) without collar 왘 with Crimping Plier for End Sleeves 97 71 180

Model 97 90 06: 왘 end sleeves (ferrules) with collar 왘 with Crimping Plier for End Sleeves 97 71 180

97 90 06 Article-No. 9 EAN-

9 Crimping Plier

Code

mm2 0.5/0.75/ 1.0 / 1.5 / 2.5

4003773-

97 90 05 97 90 06

025535 025542



9 200 end 9 150 end 9 50 end sleeves each sleeves each sleeves each

No. 97 71 180

mm2 4.0/6.0

mm2 10.0/16.0

g 1610 1730

Model 97 90 07: 왘 end sleeves (ferrules) without collar 왘 with Crimping Plier for End Sleeves 97 61 145 F Model 97 90 08: 왘 end sleeves (ferrules) with collar 왘 with Crimping Plier for End Sleeves 97 61 145 F Model 97 90 09: 왘 end sleeves (ferrules) with collar 왘 with Crimping Plier for End Sleeves 97 53 04

97 90 09

Model 97 90 10: 왘 end sleeves (ferrules) with collar 왘 with Crimping Plier for End Sleeves 97 53 04 and Insulation Stripper 12 40 200

97 90 10

97 90 12

Article-No. 9 EANCode

9 Crimping Plier

4003773-

97 90 07

026877

No. 97 61 145 F

97 90 08 97 90 09 97 90 10

026990 028574 046202

No. 97 61 145 F No. 97 53 04 No. 12 40 200 No. 97 53 04 No. 12 40 200 No. 97 53 08

97 90 12

112

Model 97 90 12: 왘 end sleeves (ferrules) with collar 왘 with Crimping Plier for End Sleeves 97 53 08 and Insulation Stripper 12 40 200

www.crimping.info

91000 end 9 300 end 9 200 end 9 150 end 9 100 end sleeves each sleeves each sleeves each sleeves each sleeves each mm2 0.75/1.0/ 1.5/2.5 -

mm2 -

mm2 -

0.75/1.0/1.5 2.5 0.75/1.5 2.5 0.75/1.0/ 1.5/2.5 0.75/1.0/ 1.5/2.5



mm2 -

mm2 -

g 1110

4.0 -

4.0/6.0

1005 1225 1495

-

4.0/6.0

1590


Style

Female Sockets

Male Connectors Round Sockets Round Pin Plugs Flat Pin Accessory Distributors Cable Connectors, eye type

Cable Connectors, forked

Round Pattern Cable Connectors Insulated Butt Connectors Two-Way-Sockets Accessory Distributors End Sleeves (ferrules)

End Sleeves (ferrules) with collar

Non-insulated Plug Connectors

0 Article-No. 0

0 EAN-Code 0

0 wide x 0 thick mm2

97 99 01 97 99 02 97 99 03 97 99 04 97 99 05 97 99 06 97 99 07 97 99 08 97 99 09 97 99 10 97 99 11 97 99 12 97 99 13 97 99 14 97 99 15 97 99 16 97 99 17 97 99 18 97 99 19 97 99 20 97 99 21 97 99 22 97 99 23 97 99 24 97 99 25 97 99 26 97 99 27 97 99 28 97 99 29 97 99 30 97 99 31 97 99 32 97 99 33 97 99 34 97 99 35 97 99 36 97 99 37

4003773025559 025566 025573 025580 025597 025603 025610 025627 025634 025641 025658 025665 025672 025689 025696 025702 025719 025726 025733 025740 025757 025764 025771 025788 025795 025801 025818 025825 025832 025849 025856 025863 025870 025887 025894 025900 025917

– – – – – – 6.3 x 0.8

97 99 38

025924

6.3 x 0.8

97 99 40 97 99 41 97 99 42 97 99 43 97 99 44 97 99 45 97 99 46 97 99 47 97 99 48 97 99 49 97 99 70 97 99 71 97 99 72 97 99 73 97 99 74 97 99 75 97 99 76 97 99 77 97 99 78 97 99 79 97 99 92 97 99 93 97 99 95 97 99 96

025931 025948 025955 025962 025979 025986 025993 026006 026013 026020 024248 024255 024262 024279 024286 026037 026044 026051 026068 026075 031123 031130 031147 031151

6.3 x 0.8 6.3 x 0.8 6.3 x 0.8 8.0 x 0.8 6.3 x 0.8 6.3 x 0.8 – – – – 6.3 x 0.8 6.3 x 0.8

0 plug 0 ø mm

0 cable 2 0 mm

– – – – – – 4.0 5.0 4.0 5.0 – – 3.0* 4.0* 5.0* 4.0* 5.0* 6.0* 8.0* 5.0* 6.0* 8.0* 10.0* 3.0* 4.0* 5.0* 4.0* 5.0* 5.0* 6.0* – – – – – – –

0.5-1.0 1.5-2.5 4.0-6.0 1.5-2.5 0.5-1.0 1.5-2.5 0.5-1.0 1.5-2.5 0.5-1.0 1.5-2.5 0.5-1.0 1.5-2.5 0.5-1.0 0.5-1.0 0.5-1.0 1.5-2.5 1.5-2.5 1.5-2.5 1.5-2.5 4.0-6.0 4.0-6.0 4.0-6.0 4.0-6.0 0.5-1.0 0.5-1.0 0.5-1.0 1.5-2.5 1.5-2.5 4.0-6.0 4.0-6.0 0.5-1.0 1.5-2.5 4.0-6.0 0.5-1.0 1.5-2.5 4.0-6.0 –

– Length mm 6.0 6.0 6.0 7.0 7.0 9.0 10,0 12.0 12.0 18.0 8.0 8.0 8.0 8.0 8.0 10.0 12.0 12.0 12.0 16.0

– 0.5 0.75 1.0 1.5 2.5 4.0 6.0 10.0 16.0 25.0 0.5 0.75 1.0 1.5 2.5 4.0 6.0 10.0 16.0 25.0 2.8-1.5 4.8-1.5 6.3-1.5 6.3-2.5

0 AWG 0 20-17 15-13 11-10 15-13 20-17 15-13 20-17 15-13 20-17 15-13 20-17 15-13 20-17 20-17 20-17 15-13 15-13 15-13 15-13 11-10 11-10 11-10 11-10 20-17 20-17 20-17 15-13 15-13 11-10 11-10 20-17 15-13 11-10 20-17 15-13 11-10

0 colour

0 0

red blue yellow blue red blue red blue red blue red blue red red red blue blue blue blue yellow yellow yellow yellow red red red blue blue yellow yellow red blue yellow red blue yellow

75 50 25 50 75 75 25 25 75 50 25 25 100 100 100 100 50 50 50 25 25 25 25 100 100 75 75 50 25 25 100 100 25 50 25 25 25 50

20 18 17 15 13 11 10 7 5 3 20 18 17 15 13 11 10 7 5 3 15 15 15 13

white grey red black blue grey yellow red blue yellow

200 200 200 200 200 150 150 50 50 50 200 200 200 200 200 150 150 50 50 50 150 150 100 100

* Ø for screws

www.crimping.info

113


Testing electrical insulation After submersion in water for 24 hours, the tools are tested with AC 10,000 V for 3 minutes including measuring of the leakage current. The reading of the leakage current must stay below the limits defined in the standards.

Testing low temperature impact strength The tools are cooled down to – 25°C. The insulation material must retain the toughness necessary to ensure that it does not break when hit or knocked.

Testing dielectric strength Each KNIPEX insulated tool has been tested individually. This individual testing is done with a test voltage of AC 10,000 volts. This test load, which is 10 times as high as the maximum permitted voltage during work, inspires the user to trust a reliable insulation when live working. Testing the adhesion of the insulating coating The adhesion of the insulation coating is tested after storage for 168 hours at 70°C. In case of pliers a tensile load of 500 N is applied. The insulating material must remain firmly bonded to the basic tool.

Testing burning behaviour KNIPEX uses only flame-resistant and self-extinguishing plastics for insulation.

Testing indentation resistance The insulation heated to 70°C must prove under standardised test conditions that the warm plastic has sufficient mechanical strength to resist expected loads.


Insulated tools KNIPEX insulated tools – safety tested, one by one When working on electrical installations, the safest is to disconnect these systems from the energy supply first. Only a skilled and qualified electrician may work on live installations and then only in conformance with the relevant industrial safety standards, in Germany, e.g. VDE 0105, and international standards, e.g. EN 50110 or IEC 60364. He must also use special tools which have been specifically produced and tested for this kind of work.

Handle Insulation (Finish 6) KNIPEX pliers with the two-colour dual component handle insulation meet the requirements of VDE 0682 part 201 and corresponding international standards (e.g. EN 60900 or IEC 60900). This claim is confirmed by the VDE/GS mark awarded by an obligatorily neutral inspection office.

KNIPEX insulated tools are made of high-quality materials, which have been manufactured and tested in conformance with the regulations of national and international standards. If the descripted methods for live working, e.g. DIN VDE 0105, EN 50110, IEC 60364, are observed, these tools offer the best possible protection when it is necessary to work live up to AC 1000 V (alternating current) and DC 1500 V (direct current). Since 1987 the IEC 60900 has specified worldwide requirements for tools for live working. EN 60900 made these mandatory for the EU countries since 1st Aug. 1995. Tests on tools which bear the special mark include subjecting them to 10,000 volts to test their dielectric strength. This gives the user a level of safety which is at least 10 times the limit when working live.

The and marks identify KNIPEX insulated tools as being suitable for live working. The standard also specified shows the requirements against which this can be verified. The manufacturer name KNIPEX on the insulation indicates that we accept responsibility for the correctness of these information. This is important because the purchase of insulated tools is a matter of trust.

IEC 60900 DIN EN 60900

The slip guard is designed to prevent any spark-over from the non-insulated working head to the hand.

Dipped Insulation (Finish 7) KNIPEX pliers with dipped insulation meet all requirements set by the VDE standard and corresponding international standards (e.g. IEC 60900 and DIN EN 60900). They bear the VDE/GS mark. Because of their shape, tools such as open end wrenches, box wrenches, socket wrenches, ratchets, etc., are insulated by coating with plastics in a dipping process. To offer a complete range of safety tools in a similar design, KNIPEX insulated pliers are also availabe in a dipped insulated version.

The observation of these requirements is monitored not only by the KNIPEX quality assurance team but also e.g. by VDE (Association of German Electricians). Sample tests, manufacturing inspections and stock control by the neutral VDE inspection office.

The firmly bonded double dipped insulation is made of insulating material which is free of harmful substances and more than 1 mm thick at each point.

Extra thick insulation at the ends of the handle. This prevents cracks following an impact.

Always follow the statutory regulations and obey the SAFETY INSTRUCTIONS given below: 왘 Always transport your safety tool in a manner that prevents any damage to the insulation. 왘 Check before every use wether the insulation is damaged and discard any defective tools found. 왘 Always keep your safety tools clean and dry. 왘 Wear protective goggles when working with cutting nippers or working overhead. 왘 Make sure the working area is clean and orderly when you are working live.

왘 Wear protective clothing and use safety equipment (e.g. safety gloves, insulating matts, protective handles), – especially in confined working areas. 왘 Use the right tool size. This prevents the tool slipping on the work piece and unintentional contact with non-insulated parts. 왘 Make sure that loose parts and cut-off ends of cables do not fall onto live parts.

115


01

01 Combination Pliers,

Chrome Vanadium DIN ISO 5746 IEC 60900 DIN EN 60900

01 06 190

Article-No. 9 EANLength mm

9 Head

9 Handles

9 Cutting capacities



Code 4003773-

01 06 160

040729

190

040415

chrome plated chrome plated

insulated with two-colour dual component handles VDE-tested

02

ø mm ø mm ø mm mm2 2.0 1.5 10.0 16.0

g 210

2.5

300

2.0

13.0 25.0

왘 for heaviest duty 왘 with gripping zones for flat and round material, suitable for versatile use 왘 with cutting edges for soft, hard and piano wire 왘 long cutting edges for thicker cables 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC 왘 particularly wear resistant gripping jaws; hardness of the gripping jaws approx. 53 HRC 왘 Chrome Vanadium electric steel, oil-hardened and tempered

02 High Leverage Combination Pliers DIN ISO 5746 IEC 60900 DIN EN 60900 왘 for heaviest duty 왘 35% saving in power due to new, improved lever action 왘 with gripping zones for flat and round material, suitable for versatile use 왘 with cutting edges for soft, hard and piano wire 왘 long cutting edges for thicker cables 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC 왘 high grade special tool steel, oil-hardened and tempered

02 06 200

02 07 225

Article-No. 9 EANLength mm

02 06 180 200 225 02 07 200 225 116

9 Head

9 Handles

9 Cutting Capacities



Code 4003773-

010012 010029 010036 022299 022305

chrome plated chrome plated

insulated with two-colour dual component handles VDE-tested plastic dipped insulated VDE-tested

ø mm 2.5 2.8 3.0 2.8 3.0

ø mm 2.0 2.2 2.5 2.2 2.5

ø mm mm2 11.5 16.0 13.0 25.0 14.0 25.0 13.0 25.0 14.0 25.0

g 240 335 405 385 490

KNIPEX High Leverage Combination Pliers with optimum position of the joint facilitate cutting as well as powerful gripping, bending and pulling.

Requires 35 % less effort Cutting a hard wire of 2.0 mm dia. with a High Leverage Combination Plier of 180 mm length requires handforce of only 318 N (31.8 kp) instead of 486 N (48.6 kp) with a common Combination Plier of same length.


03

03 Combination Pliers 왘 with gripping zones for flat and round material, suitable for versatile use 왘 with cutting edges for soft and hard wire 왘 long cutting edges for thicker cables 왘 cutting edges additionally induction hardened, cutting edge hardness approx. ca. 60 HRC 왘 special tool steel, oil-hardened and tempered

DIN ISO 5746 IEC 60900 DIN EN 60900

03 06 180

03 07 200

Article-No. 9 EANLength mm

03 06 160 180 200 03 07 160 180 200 250

9 Head

9 Handles

9 Cutting Capacities



Code 4003773-

021902 021926 033776 015307 015314 015321 015345

chrome plated chrome plated

insulated with two-colour dual component handles VDE-tested plastic dipped insulated VDE-tested

11

ø mm 3.1 3.4 3.8 3.1 3.4 3.8 3.8

ø mm 2.0 2.2 2.5 2.0 2.2 2.5 2.5

ø mm mm2 10.0 16.0 12.0 16.0 13.0 16.0 10.0 16.0 12.0 16.0 13.0 16.0 15.0 25.0

g 220 265 335 265 305 380 610

11 Wire Strippers 왘 for single, multiple and fine strand conductors with plastic or rubber insulation max. 5.0 mm dia. or resp. 10.0 mm2 cable cross section 왘 easy adjustment to the required diameter of the solid or stranded wire with knurled screw and lock nut 왘 special tool steel, oil-hardened and tempered

IEC 60900 DIN EN 60900

11 06 160

Style 0: 왘 with opening spring Style 1: 왘 without opening spring

11 07 160

Article-No. 9 EANLength mm

9 Style

9 Head

9 Handles

Code 4003773-

11 06 160

021933

0

chrome plated

11 07 160

015499

1

11 17 160

015505

1

chrome plated chrome plated

insulated with two-colour dual component handles VDE-tested plastic dipped insulated VDE-tested plastic dipped insulated VDE-tested

9 Stripping capacities



ø mm mm2 AWG g 5.0 10.0 7.0 165

5.0

10.0 7.0

195

5.0

10.0 7.0

195

117


14

14 Diagonal Insulation Stripper IEC 60900 DIN EN 60900 왘 the essential plier for electrical installation work 왘 precision stripping holes for single (solid) conductors of 1.5 and 2.5 mm2

14 26 160

Article-No. 9 EANLength mm

14 26 160

왘 induction hardened precision blades for soft wire up to 4.0 mm dia., cutting edge hardness approx. 60 HRC 왘 high grade special tool steel, oil-hardened and tempered

9 Head

9 Handles

9 Cutting capacities



Code 4003773-

040279

chrome

insulated with two-colour dual component handles VDE-tested

20

mm2 1.5 + 2.5

AWG 15 + 13

g 210 Multi-functional: cutting and stripping

20 Flat Nose Pliers 왘 short, flat jaws 왘 serrated gripping surfaces 왘 special tool steel, oil-hardened and tempered

DIN ISO 5745 IEC 60900 DIN EN 60900

20 06 160 L3

T1

Article-No. 9 EANLength mm

20 06 160

118

9 Head

9 Handles



9 Dimensions

Code

L3

W3

T1

4003773-

mm

mm

mm

30.0

17.0

9.5

033783

chrome plated

insulated with two-colour dual component handles VDE-tested

g 175

W3


22

22 Round Nose Pliers 왘 for forming wire loops 왘 precision ground, short, round jaws 왘 smooth tips 왘 special tool steel, oil-hardened and tempered

DIN ISO 5745 IEC 60900 DIN EN 60900

22 06 160

22 07 160

Ø D1

Article-No. 9 EANLength mm

9 Head

9 Handles

4003773-

22 06 160

033790

chrome plated

22 07 160

015901

chrome plated

insulated with two-colour dual component handles VDE-tested plastic dipped insulation VDE-tested

25



9 Dimensions

Code

25 Chain Nose Side Cutting Pliers,

L3 mm 30.0

W3 mm 18.0

D1 ø mm 3.0

g 170

30.0

18.0

3.0

205

W3

Radio Pliers 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 61 HRC 왘 high grade special tool steel, oil-hardened and tempered

DIN ISO 5745

IEC 60900 DIN EN 60900 왘 suitable for gripping and cutting work in electronics 왘 pointed, half-round jaws 왘 serrated gripping surfaces 왘 with cutting edges for medium hard wire max. dia. 2.5 mm and hard wire max. dia. 1.6 mm

25 06 160

L3

T2

W4

L3 T1 W3

25 26 160

Article-No. 9 EAN- 9 Style 9 Head Length Code mm 400377325 06 160 033806

0

chrome plated

25 26 160

2

chrome plated

052111

40°

9 Handles

insulated with two-colour dual component handles VDE-tested insulated with two-colour dual component handles VDE-tested

9 Cutting capacities



9 Dimensions

mm 2.5

mm 1.6

L3 mm 50.0

W3 T1 W4 T2 mm mm mm mm g 16.5 9.5 3.0 2.5 150

2.5

1.6

50.0

16.5 9.5

3.0

2.5

150

119


26

26 Snipe Nose Side Cutting Pliers,

Stork Beak Pliers

DIN ISO 5745

26 16 200 왘 high loadable, elastic precision points 왘 half-round, long jaws 왘 serrated gripping surfaces 왘 with cutting edges for medium hard wire max. dia. 3.2 mm and hard wire max. dia. 2.2 mm 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 61 HRC 왘 Vanadium steel, oil-hardned and tempered

Style 1: straight jaws

26 27 200 Style 2: 40° bent jaws

Article-No. 9 EAN-

9 Head



9 Handles

3

Code g 205

4003773-

26 16 200

022831

26 17 200

016069

26 26 200

022855

2

chrome plated

26 27 200

016090

40°

chrome plated

1

chrome plated chrome plated

30

30 Long Nose Pliers

insulated with two-colour dual component handles VDE-tested plastic dipped insulated VDE-tested insulated with two-colour dual component handles VDE-tested plastic dipped insulated VDE-tested

23

Length mm

9 Style

KNIPEX Snipe Nose Side Cutting Pliers (Stork Beak Pliers) are forged from Vanadium steel and are carefully hardened. The slim precision tips withstand high demands, particulary bending loads.

2.5

IEC 60900 DIN EN 60900

73

225 9.5

205 17.5

225

without side cutter DIN ISO 5745

왘 heavy duty and wear resisting 왘 different jaw styles 왘 Chrome Vanadium electric steel, oil-hardened and tempered

IEC 60900 DIN EN 60900

30 16 160

Style 1: 왘 long, trapezoidal jaws 왘 serrated gripping surfaces

Style 1: long, trapezoidal jaws

Style 3: 왘 long, round jaws 왘 smooth gripping surfaces

30 36 160 Style 3: long, round jaws

T2

Article-No. 9 EAN- 9 Style 9 Head Length Code mm 400377330 16 160 001904

30 36 160

120

002123

1

chrome plated

3

chrome plated

9 Handles

insulated with two-colour dual component handles VDE-tested insulated with two-colour dual component handles VDE-tested

W1



9 Dimensions L3

W3

T1

W4

T2

mm

mm

mm

mm

mm

46.5 16.5 9.5

3.0

g 5.0 155

L3 T1 W3

41.0 16.5 9.5

5.0

2.5 145


70

70 Diagonal Cutters DIN ISO 5749 IEC 60900 DIN EN 60900

왘 the indispensable diagonal cutter for all-round use 왘 high quality material and precise workmanship for long service life 왘 precision cutting edges for soft and hard wire 왘 clean cutting at cutting edge tips, also in case of thin copper wires 왘 cutting edges additionally induction hardened, cutting edge hardness approx. 62 HRC

70 06 160

70 07 160

Article-No. 9 EAN- 9 Style 9 Head Length Code mm 400377370 06 125 018124 140 040293 160 021995 180 033813 70 07 160 018155 180 018179 70 26 160 018223

0

2

9 Handles

chrome plated

insulated with two-colour dual component handles

verchromt

VDE-tested plastic-dipped

chrome plated

VDE-tested insulated with two-colour dual component handles

74

9 Cutting capacities



ø mm ø mm ø mm 3.0 2.3 1.5 4.0 2.5 1.8 4.0 2.8 2.0 4.0 3.0 2.5 4.0 2.8 2.0 4.0 3.0 2.5 4.0 VDE-tested

g 120 160 210 255 240 285 210

The cutting edges of KNIPEX Diagonal Cutters – made of Vanadium steel – have a long service life, are treated highly precise and are very sharp - for a clean cut of soft and hard wires. 왘 narrow head style for use in confined areas 왘 Vanadium electric steel, oil-hardened and tempered Style 0: 왘 with bevel Style 2: 왘 with small bevel

Slim head style and precise cut at blade tips: Advantageous when working in confined areas

74 High Leverage Diagonal Cutters DIN ISO 5749 IEC 60900 DIN EN 60900 왘 with forged-on axle for heaviest duty 왘 suitable for all types of wire including piano wire 왘 high cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle, transmission ratio and ergonomic handle shape 왘 precision cutting edges additionally inductionhardened, cutting edge

74 06 200 fixed, forged-on axle

74 07 200 Article-No. 9 EAN- 9 Head Length Code mm 400377374 06 160 040705 180 022985 200 033820 250 041955 74 07 200 018414 250 018421

9 Handles

chrome plated

insulated with two-colour dual component handles

chrome plated

VDE-tested plastic dipped insulated VDE-tested

9 Cutting capacities ø mm 3.4 3.8 4.2 4.6 4.2 4.6

ø mm 2.5 2.7 3.0 3.5 3.0 3.5

ø mm 2.0 2.2 2.5 3.0 2.5 3.0

 g 215 260 305 440 340 475

The choice of material (Chrome Vanadium), lever ration and cutting edge angle mean that KNIPEX - High Leverage Diagonal Cutters are particularly designed for the cutting of hard wires. Fixed, forged-on articulated axle for work under continuous stress.

hardness approx. 64 HRC 왘 the 250-mm-long diagonal cutter is suitable for copper conductors up to 16 mm2 and aluminium conductors up to 35 mm2 왘 Chrome Vanadium electric steel, oil-hardened and tempered

121


88

88 KNIPEX-"Alligator"

Water Pump Pliers 왘 box-joint design: high stability because of double guide 왘 self-locking on pipes and nuts: no slipping on the workpiece; low handforce required 왘 guard prevents operators' fingers being pinched 왘 favourable lever action: optimum transmission of force 왘 gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: low wear and secure gripping 왘 Chrome Vanadium electric steel, oil-hardened and tempered

DIN ISO 8976 IEC 60900 DIN EN 60900

88 06 250

88 07 250

Article-No. 9 EANLength mm

9 Head

9 Handles

Code

9 Capacities for pipes

 for nuts

1 1/2

Inch 36

g 370

1 1/2 2

36 46

415 635

4003773-

88 06 250

039303

chrome plated

88 07 250 300

019343 022350

chrome plated

insulated with two-colour dual component handles VDE-tested plastic dipped insulated VDE-tested

92

mm (across flats)

92 Precision Tweezers IEC 60900 DIN EN 60900 왘 tested according IEC 60900: 2004 왘 plastic dipped insulated 왘 nickel plated

92 27 61

92 27 62

92 67 63

4003773-

92 27 61 92 27 62 92 37 64 92 67 63 122

054757 054764 054856 054931



9 Finish

Code plastic dipped insulated IEC 60900: 2004

Model 92 27 62: 왘 straight pattern 왘 gripping surfaces with fine transverse serration Model 92 37 64: 왘 bent tips 왘 gripping surfaces with fine transverse serration

92 37 64 Article-No. 9 EAN-

Model 92 27 61: 왘 for ultra fine mounting work 왘 extra fine tips 왘 straight pattern 왘 gripping surfaces mattfinished for optimum grip

Length mm 130 150 150 145

g 30 35 35 40

Model 92 67 63: 왘 straight pattern 왘 serrated gripping surfaces


95

95 Cable Shears IEC 60900 DIN EN 60900 왘 for cuting copper conductors single wire up to 16 mm2, multiple wire up to 50 mm2, fine strand up to 70 mm2 and aluminium conductors multiple wire up to 70 mm2 왘 not suitable for steel wire and hard drawn copper conductors

95 06 230

Article-No. 9 EANLength mm

95 06 230

9 Head

9 Handles



9 Cutting capacity

Code ø mm 16

4003773-

006305

bright polished

plastic insulated

mm2 50

AWG 1

g 275

VDE-tested

95

95 Cable Shears IEC 60900 DIN EN 60900 왘 for cutting copper and aluminium cables, single and multiple wire 왘 not suitable for steel wire and hard drawn copper conductors 왘 precision ground, hardened blades

95 16 165

Article-No. 9 EANLength mm

95 16 165

왘 precision ground, hardened blades 왘 easy cutting with one-hand operation due to high transmission ratio 왘 no crushing, slight deformation of the cable only 왘 with guard 왘 adjustable screw joint 왘 stainless – special grade – steel, oil-hardened and tempered

9 Head

9 Handles

왘 clean and smooth cut without crushing and deformation 왘 easy cutting with one-hand operation 왘 with guard 왘 adjustable screw joint, self-locking 왘 forged 왘 Vanadium steel, oil-hardned and tempered



9 Cutting capacity

Code 4003773-

039648

chrome plated

insulated with two-colour dual component handles VDE-tested

Cut performed with a Diagonal Cutter: high effort required, inaccurate cut, considerable deforming and crushing of the cable

ø mm 15

mm2 50

AWG 1/0

g 255

Cut performed with a Cable Shear: easy, clean cut without any deformation of the cable

123


95

95 Cable Shears

with twin cutting edge

patented

IEC 60900 DIN EN 60900

95 16 200

왘 for cutting copper and aluminium cables, single and multiple wire 왘 not suitable for steel wire and hard drawn copper conductors 왘 precision ground, hardened blades 왘 clean and smooth cut without crushing and deformation 왘 easy cutting with one-hand operation 왘 initial and final cut (upper and lower blade) allows cables of up to 20 mm dia. to be cut

95 17 200

Article-No. 9 EANLength mm

9 Head

9 Handles

KNIPEX Cable Shears with twin cutting edge are designed for cutting cables up to 20 mm dia. Even in case of large cable cross sections handles are always in a favourable position due to initial and final cut. 왘 low handforce required due to favourable lever ratio and new blade geometry 왘 with guard 왘 adjustable screw joint, self-locking 왘 forged 왘 special tool steel, oil-hardened and tempered



9 Cutting capacity

Code 4003773-

95 16 200

026761

chrome plated

95 17 200

026952

chrome plated

insulated with two-colour dual component handles VDE- tested plastic dipped insulated VDE- tested

95

ø mm 20

mm2 70

AWG 2/0

g 345

20

70

2/0

380

95 Cable Shears IEC 60900 DIN EN 60900

95 17 500

왘 for cutting copper and aluminium cables, single and multiple wire 왘 not suitable for steel wire and wire ropes 왘 precision ground, hardened blades 왘 clean and smooth cut without crushing and deformation 왘 adjustable screw joint 왘 with guard

Model 95 17 500: 왘 low handforce required due to favourable lever ratio and new blade geometry 왘 short design, length only 500 mm 왘 low weight 왘 cutter head forged from Vanadium steel, oil-hardened and tempered 왘 handles made of high resistant aluminium pipes



Model 95 27 600: 왘 favourable transmission ratio due to double lever 왘 replaceable, forged cutter head 왘 cutter head made of special tool steel, oil-hardened and tempered

95 27 600

Article-No. 9 EANLength mm

95 17 500 95 27 600 95 29 600 124

9 Head

9 Handles

9 Cutting capacity

Code 4003773-

026785 021797 021803

polished plastic dipped insulated polished VDE-tested spare cutter for 95 27 600

ø mm 27 27

mm2 150 150

AWG 5/0 5/0

g 1360 2300 365


95

95 Cable Cutters

Ratchet Action

patented

IEC 60900 DIN EN 60900 왘 for cutting copper and aluminium cables, single and multiple wire 왘 not suitable for steel wire and wire ropes 왘 precision ground, hardened blades 왘 clean and smooth cut without crushing and deformation 왘 one-hand operation using ratchet principle 왘 little handforce required due to optimum transmission ratio

95 36 280

Article-No. 9 EANLength mm

9 Head

9 Handles

9 Cutting capacities

왘 two-stage ratchet drive for easy cutting 왘 simple handling as a result of low weight and compact design - can be used even in confined areas 왘 with guard 왘 special grade tool steel

Model 95 36 280: 왘 suitable for aluminium sector cable up to 4 x 150 mm2



Code 4003773-

95 36 250 280

026884 026891

95 39 250 95 39 280

022244 025283

lacquered

insulated with two-colour dual component handles VDE-tested spare moving blade spare moving blade

ø mm 32 52

mm2 240 380

MCM 500 750

g 560 735 130 260

Ratchet principle and two-stage ratchet drive for easier cutting.

95

95 Wire Rope and Cable Cutter IEC 60900 DIN EN 60900 왘 for wire ropes and steel rods, copper and aluminium cables 왘 suitable for cutting overhead cables with strain relief wire 왘 angular cutting blades allow cutting of single rope wire 왘 optimum transmission ratio for high cutting performance

95 77 600

Fe

Article-No. 9 EANLength mm

9 Head

9 Handles

9 Cutting capacities

4003773-

025313

95 79 445

025320



Fe

Code

95 77 600

왘 low weight 왘 replaceable cutter head 왘 high-strength aluminium handles 왘 cutter head made of special grade tool steel, oil-hardened and tempered

polished

plastic dipped insulated VDE-tested spare cutter head

mm2 150

ø mm 14

ø mm AWG g 9 5/0 2250

125


98

98 Open End Wrenches IEC 60900 DIN EN 60900

98 00 14

Open End Wrenches Imperial sizes

Article- 0 Width across 0 EANNo. 0 flats S 0 Code mm

98 00

07 08 09 10 11 12 13 14 15 16 17 18 19 22 24 27

왘 jaw 15° angled 왘 basic tool chrome plated 왘 forged from Chrome Vanadium steel 왘 tested according to DIN EN/IEC 60900

DIN 7446

4003773019824 019831 019848 019893 019909 019923 019930 019947 019954 019961 019978 019985 019992 020004 020011 020028

0 Length 0 l max* mm 105 105 105 105 120 125 130 135 145 155 155 160 165 190 210 215

0 Head width 0 b max* mm 20.0 22.0 24.0 27.0 30.0 32.0 34.0 35.0 37.0 38.0 42.0 44.0 47.0 52.0 56.0 63.0

0 Head Hickness  0 a max* mm 4.0 4.0 4.0 5.0 5.5 5.5 6.5 6.5 7.0 7.0 8.0 8.0 9.0 9.0 9.0 9.0

g 30 30 35 40 60 60 65 80 85 110 110 140 150 200 280 310

ArticleNo.

0 EAN0 Code

98 00 1/4” 98 00 5/16” 98 00 3/8” 98 00 7/16” 98 00 1/2” 98 00 9/16” 98 00 5/8” 98 00 3/4”

0 Width across 0 flats

4003773019886 020073 020042 020097 019879 020110 020080 020035

INCH 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4

0 Length 0 INCH 4. 1/4 4. 1/4 4. 1/4 4. 3/4 5. 1/2 6 6. 1/2 7

* complies with the non-insulated basic tool

98

98 Box Wrenches 왘 cranked 왘 basic tool chrome plated 왘 forged from Chrome Vanadium steel 왘 tested according to DIN EN/IEC 60900

DIN 7447 IEC 60900 DIN EN 60900

98 01 14 Article- 0 Width across 0 EANNo. 0 flats S 0 Code mm

98 01

126

4003773020134 020141 020158 020196 020202 020226 020233 020240 020257 020264 020271 020288 020295 020301 020318

0 Length 0 l max* mm 150 155 165 160 180 190 185 195 215 200 205 210 225 225 265

0 Head width 0 b max* mm 12.0 14.0 15.5 17.0 18.5 18.5 21.5 23.0 24.0 26.0 27.0 29.0 30.0 35.0 38.0

07 08 09 10 11 12 13 14 15 16 17 18 19 22 24 * complies with the non-insulated basic tool

0 Head Hickness 0 a max* mm 7 7 8 9 10 10 11 12 12 12 13 13 14 15 16

0 Depth of crank 0 h max* mm 18 19 19 20 21 23 23 24 24 26 26 28 28 30 30

 g 50 50 75 80 90 130 120 150 165 190 185 235 250 265 355


98

DIN 7445

98 Nut Drivers

S d

IEC 60900 DIN EN 60900

98 03 10

Article- 0 Width 0 EANNo. 0 across flats 0 Code 98 03

S mm 05.5 06 07 08 09

0 Length 0 Blade 0 0 length

4003773- mm

026082 026099 026105 024095 026112

220 220 230 230 230

0 Handle 0 Head 0 length 0 dia.

mm 130 130 130 130 130

mm 90 90 100 100 100



ø mm 11 12 14 15 16

98

g 80 80 115 115 120

Article- 0 Width 0 EANNo. 0 across flats 0 Code 98 03

S mm 10 11 12 13

with fixed T-Handle S d

0 Length 0 Blade 0 0 length

4003773- mm

026129 026136 026143 026150

230 245 245 245

0 Handle 0 Head 0 length 0 dia.

mm 130 130 130 130

mm 100 115 115 115

ø mm 17 19 20 21

 g 120 170 170 175

왘 special tool steel, oil-hardened and tempered 왘 VDE tested according to DIN EN/IEC 60900

DIN 7440

98 T-Socket Wrenches

왘 handle design prevents rolling 왘 ergonomically designed safety handle for optimum transmission of force 왘 Chrome Vanadium steel 왘 VDE tested according to DIN EN/IEC 60900

IEC 60900 DIN EN 60900

98 04 13

Article- 0 Width 0 EANNo. across flats 0 0 Code 98 04

S mm 10 13 17 19

0 Length 0 Handle 0 0 width

4003773026167 026198 026211 020424

mm 200 200 200 200

mm 155 155 155 155

98

0 Head 0 dia.



ø mm 19,5 23,5 28,5 31,0

g 350 375 450 570

Article- 0 Width 0 EANNo. across flats 0 0 Code 98 05

S mm 13 17 19

DIN 7439

98 Screwdrivers for hexagon socket screws

IEC 60900 DIN EN 60900

S

98 13 40

Article- 0 Width 0 EAN- 0 Length 0 Blade No. 0 across flats 0 Code 0 0 length S mm 4003773- mm mm 98 13 2.5 026334 170 80 3.0 026341 170 80 4.0 026358 170 80

98

98 Screwdrivers

0 Length of 0 Handle 0 non-insulated 0 length blade mm mm  9 10 10

90 90 90

40 40 50

IEC 60900 DIN EN 60900

S

4003773026273 026297 026303

mm 300 300 300

mm 155 155 155

0 Head 0 dia.



ø mm 23,5 28,5 31,0

g 435 580 750

왘 handle design prevents rolling 왘 ergonomically designed safety handle for optimum transmission of force 왘 Chrome Vanadium steel, oil-hardened and tempered 왘 VDE tested according to DIN EN/IEC 60900

Article- 0 Width 0 EAN- 0 Length 0 Blade No. 0 across flats 0 Code 0 0 length S mm 4003773- mm mm 98 13 5.0 026365 180 80 6.0 026372 205 105

with T-Handle

for hexagon socket screws

0 Length 0 Handle 0 0 width

0 Length of 0 Handle 0 non-insulated 0 length blade mm mm  11 12

100 100

70 85

왘 special tool steel, oil-hardened and tempered 왘 tested according to DIN EN/IEC 60900

98 15 08

Article- 0 Width 0 EANNo. 0 across flats 0 Code 98 14

S mm 05 06 08

0 Length 0 Length of non- 0 T-Handle  0 0 insulated blade ±2 0 width

4003773- mm

020431 020448 020455

120 120 120

mm 9 10 11

mm 90 90 90

g 195 200 270

Article- 0 Width 0 EANNo. 0 across flats 0 Code 98 15

S mm 05 06 08

0 Length 0 Length of non- 0 T-Handle  0 0 insulated blade ±2 0 width

4003773- mm

020479 020486 020493

250 250 250

mm 9 10 11

mm 90 90 90

g 325 330 440

127


98

98 Screwdrivers for slotted screws

IEC 60900 DIN EN 60900

98 20 55

Article- 0 Blade No. 0 width mm

98 20

98 21

2.8 3.5 4.0 5.5 6.5 8.0 10.0 4.5

왘 handle design prevents rolling 왘 ergonomically designed safety handle for optimum transmission of force 왘 Chrome Vanadium steel, oil-hardened and tempered 왘 VDE tested according to DIN EN/IEC 60900

DIN 7437

0 EAN0 Code 4003773024200 024217 026402 024224 026419 024231 026396 026426

0 Blade 0 thickness mm 0.6 0.6 0.8 1.0 1.2 1.2 1.6 1.0

0 Length 0 mm 160 185 185 220 255 295 320 270

98

0 Blade 0 length mm 80 105 105 130 155 180 205 180

0 Length of non- 0 Handle 0 insulated blade 0 length mm 14 14 14 14 14 14 14 14

mm 80 80 80 90 100 115 115 90

 g 25 30 30 65 100 160 225 60

98 Screwdrivers for cross recessed Phillips® screws

IEC 60900 DIN EN 60900

98 24 03

Article- 0 Size No. 0 No.

98 24

00 01 02 03 04

왘 handle design prevents rolling 왘 ergonomically designed safety handle for optimum transmission of force 왘 Chrome Vanadium steel, oil-hardened and tempered 왘 VDE tested according to DIN EN/IEC 60900

DIN 7438

0 EAN0 Code 4003773026433 026440 026457 026464 026471

0 Length 0 mm 145 175 205 270 320

0 Blade 0 length mm 65 85 105 155 205

98

0 Length of non- 0 Handle 0 insulated blade 0 length mm 17 17 17 17 17

mm 80 90 100 115 115



Phillips® is a registered Trademark of Phillips Screw Company

g 40 40 50 70 85

98 Screwdrivers for cross recessed Pozidriv® screws

IEC 60900 DIN EN 60900

98 25 03

Article- 0 Size No. 0 No.

98 25

128

01 02 03

왘 handle design prevents rolling 왘 ergonomically designed safety handle for optimum transmission of force 왘 Chrome Vanadium steel, oil-hardened and tempered 왘 VDE tested according to DIN EN/IEC 60900

DIN 7438

0 EAN0 Code 4003773031260 031277 031284

0 Length 0 mm 170 200 265

0 Blade 0 length mm 80 100 150

0 Length of non- 0 Handle 0 insulated blade 0 length mm 17 17 17

mm 90 100 115

 g 48 78 150

Pozidriv® is a registered Trademark of Ind. Serv. Ltd.


98

98 T-Handle Drives with driving square 1/2”

왘 for use with sockets 왘 basic tool chrome plated 왘 for quick, easy and secure locking of attached sockets 왘 special tool steel 왘 square oil-hardened and tempered 왘 tested according to EN/IEC 60900

DIN 7436 EN/IEC 60900: 2004

98 40

Article-No. 9 EAN-

9 Handle length

98 40

4003773-

mm

026501

165

98



9 Square drive

Code

Length mm 200

1 " 2

g 590

98 Reversible Ratchets with driving square 3/8” or 1/2”

왘 for use with sockets 왘 reversible for clockwise and anti-clockwise directions 왘 extremely smooth action 왘 for quick, easy and secure locking of attached sockets 왘 Chrome Vanadium steel 왘 tested according to EN/IEC 60900

DIN 7449 EN/IEC 60900: 2004

98 31 Article-No. 9 EAN-

Length mm 190 265

4003773-

98 31 98 41

3 " 8

026495 026518

98



9 Square drive

Code

1 " 2

g 325 600

98 Extension Bars with internal and driving square 3/8” or 1/2”

왘 for use with sockets 왘 with internal and external square 왘 forged 왘 for quick, easy and secure locking of attached sockets 왘 Chrome Vanadium steel 왘 tested according to EN/IEC 60900

DIN 7434 EN/IEC 60900: 2004

98 35 125

98 35 250 Article-No. 9 EANLength Code mm 400377398 35 125 020530 250 020547 98 45 125 020813 250 020820

9 Square drive

3 " 8

3 " 8

1 " 2

1 " 2

 g 140 260 210 430

129


98

98 Hexagon Sockets

with internal square 3/8” or 1/2” for hexagon screws

왘 for metric and imperial hexagonal head screws 왘 basic tool chrome plated 왘 Chrome Vanadium steel 왘 tested according to EN/IEC 60900

DIN 7448 EN/IEC 60900: 2004

98 37 17

S d

Hexagon Sockets imperial sizes

Article- 0 Width across 0 EANNo. 0 flats S 0 Code mm

98 37

98 47

10 11 12 13 14 17 19 10 11 12 13 14 16 17 18 19 22 24 27

0 dia of effective 0 tool side d max.

4003773020578 020585 020608 020615 020622 020639 020646 020882 020899 020912 020929 020943 027287 020967 027294 020974 020981 020998 021001



0 Square 0 drive

ø mm 18.7 20.0 21.7 22.5 23.7 27.5 30.0 19.5 20.7 23.0 23.2 24.5 26.9 28.2 29.0 30.7 34.5 37.0 41.0

g 30 30 45 35 40 60 75 60 60 60 65 65 70 70 80 100 125 155 180

3 " 8

1 " 2

98

ArticleNo.

0 EAN0 Code

0 Width across 0 flats

4003773020684 020677 020707 020554 020721 020691 020660 020875 021094 021063 020905 021018 021087 020868

98 37 5/16” 98 37 3/8” 98 37 7/16” 98 37 1/2” 98 37 9/16” 98 37 5/8” 98 37 3/4” 98 47 1/2” 98 47 9/16” 98 47 5/8” 98 47 11/16” 98 47 3/4” 98 47 7/8” 98 47 1”

INCH 5/16 3/8 7/16 1/2 9/16 5/8 3/4 1/2 9/16 5/8 11/16 3/4 7/8 1

0 Square drive 0

3 " 8

1 " 2

98 Screwdriver Socket Wrenches 왘 for metric internal hexagonal head screws 왘 basic tool chrome plated 왘 tested according to EN/IEC 60900

with internal square 3/8” or 1/2” for hexagon screws EN/IEC 60900: 2004

98 39 06

S

Article- 0 Width across No. 0 flats S mm

98 39 98 49

130

05 06 05 06 08

0 EAN0 Code 4003773020776 020783 021155 021162 021179

0 Length 0 mm 75 75 75 75 75

0 Length of non0 Square ± insulated blade 2 0 0 drive mm 9 10 9 10 11

3 " 8

1 " 2

 g 55 60 90 90 90


98

98 Reversible Ratchet with driving square 1/2”

DIN 7449 EN/IEC 60900: 2004

98 42

Article-No. 9 EAN-

Length mm 265

4003773-

98 42



9 Square drive

Code 1 " 2

026525

g 600

98

왘 reversible for clockwise and anti-clockwise directions 왘 easy and secure locking of attached sockets due to screw lock 왘 Chrome Vanadium steel 왘 tested according to EN/IEC 60900

98 Torque Wrench with driving square 1/2”, reversible EN/IEC 60900: 2004

98 43 Article-No. 0 EAN0

0 Range of 0 application

Code 4003773-

98 43

026532

8-54 Nm



0 Square 0 drive

1 " 2

Length mm 310

g 900

98

왘 reversible for clockwise and anti-clockwise directions 왘 transparent insulated scale range 8 - 54 Nm 왘 lockable torque adjustment 왘 easy and secure locking of attached sockets due to screw lock 왘 calibration certificate included

왘 Chrome Vanadium steel 왘 tested according to EN/IEC 60900

98 Cable Knife IEC 60900: 2004 DIN EN 60900

98 52

Article-No. 9 EANCode 4003773-

98 52

022541



9 Blade length mm 50

Length mm 180

g 70

with protective cap

왘 solid, fixed straight blade 왘 blade oil-hardened and tempered 왘 ergonomically shaped safety handle 왘 transparent protective cap 왘 VDE tested according to DIN EN/IEC 60900 131


98

98 Dismantling Knife IEC 60900 DIN EN 60900

98 53 03

Article-No. 9 EAN-

9 Blade length

4003773-

98 53 03

026549

mm 28



9 Radius

Code mm 7

왘 solid, fixed hook blade 왘 blade oil-hardened and tempered 왘 ergonomically shaped safety handle 왘 transparent protective cap 왘 VDE tested according to DIN EN/IEC 60900

Length mm 155

g 70

98

with protective cap

98 Dismantling Knife IEC 60900 DIN EN 60900

98 53 13 Article-No. 9 EAN-

9 Blade length

4003773-

98 53 13

026556

mm 50



9 Radius

Code mm 40

Length mm 180

g 70

98

왘 narrow, fixed hook blade, sickle shaped 왘 suitable for sector cables 왘 blade oil-hardened and tempered 왘 ergonomically shaped safety handle 왘 transparent protective cap 왘 VDE tested according to DIN EN/IEC 60900

with protective cap

98 Cable Knife IEC 60900 DIN EN 60900

98 54

Article-No. 9 EAN4003773-

98 54

026563



9 Blade length

Code mm 50

Length mm 180

g 75

98

왘 solid, fixed straight blade 왘 blade oil-hardened and tempered 왘 back of the blade plastic coated to avoid short circuit 왘 ergonomically shaped safety handle 왘 transparent protective cap 왘 VDE tested according to DIN EN/IEC 60900

with protective cap

98 Dismantling Knife IEC 60900 DIN EN 60900

98 55 Article-No. 9 EANCode 4003773-

98 55 132

022558



9 Blade length mm 38

Length mm 155

g 90

with protective cap

왘 solid, fixed hook blade, sickel shaped 왘 with guide shoe at the blade point 왘 no damage of the conductor insulation 왘 blade made of stainless steel, vacuum hardened 왘 ergonomically shaped safety handle 왘 transparent protective cap 왘 VDE tested according to DIN EN/IEC 60900


98

98 Cable Knife IEC 60900 DIN EN 60900

98 56 Article-No. 9 EAN4003773-

98 56 98 56 09

026570 030829



9 Blade length

Code mm 50 spare blade

98

98 Voltage Tester

Length mm 185

g 65

왘 solid, fixed straight blade 왘 replaceable specially ground blade 왘 blade made of stainless steel 왘 with hinged blade guard, integrated in the handle, captive

왘 back of the blade plastic coated to avoid short circuit 왘 ergonomically shaped safety handle 왘 VDE tested according to DIN EN/IEC 60900

with load application

DUSPOL® compact

IEC / EN 61243-3 DIN VDE 0682-401

98 60 04

Article-No. 9 EAN-

9 Length



Code 4003773-

98 60 04

051961

mm 1400

g 185

98

왘 LED display shows direct and alternating current levels 12, 24, 50, 120, 230, 400 and 750 V 왘 polarity test with direct voltage 왘 identifying the phase conductor against the protective conductor (PE) in alternating voltage 왘 load application to suppress inductive and capacitive voltage at ls ) 200 mA

왘 VDE tested according to DIN EN/IEC 61243-3

DUSPOL® is a registered Trademark of Benning, Elektrotechnik + Elektronik GmbH & Co. KG

98 Insulating Flat Nose Plier from plastic

IEC 60900: 1995 DIN EN 60900: 1997

98 62 200 Article-No. 9 EANLength mm

98 62 200



Code 4003773-

021186

왘 especially for meter assembly and meter blocking 왘 fully insulating to avoid short circuits 왘 fibreglass reinforced plastics 왘 tested according to DIN EN 60900: 1997 IEC 60900: 1995

g 90

133


98

98 Insulating Plastic Clamp

Article-No. 9 EAN4003773-

021193

mm 15

98

Length mm 150

4003773-

021209 021216 021223

conical

1000 V VDE 0680/1 

9 Conductor key

Code

98 65 01 98 65 02 98 65 03

g 65

98 64 02

98 Plastic Slip-On Caps,

Article-No. 9 EAN-

1 2 3

왘 fibreglass reinforced plastics 왘 tested for 1000 V



9 Clamping capacity

Code

98 64 02

1000 V VDE 0680/1

왘 for holding insulating mats in place 왘 with integrated spring 왘 fully insulating to avoid short circuits

Length mm 80 80 80

98

g 7 7 7

왘 for protection against bare live cable ends (max. 10 mm dia.) 왘 plastic 왘 tested for 1000 V

98 65 01

98 Self-Clamping Slip-On Caps

Article-No. 9 EAN4003773-

021230 021247 021261



9 Inside dia.

Code

98 65 10 98 65 20 98 65 30

1000 V VDE 0680/1

mm 10 20 30

98

Length mm 80 100 110

g 10 30 40

왘 for protection against bare live cable ends 왘 plastic 왘 tested for 1000 V

98 65 30

왘 for protection when working live or close to live parts 왘 classification: 0 왘 tested according to DIN EN/IEC 60903

98 65 40

98 Electricans` Gloves

Article-No. 9 EAN-

DIN EN 60903/IEC 60903

9 Size



9 10

g 270 280

Code 4003773-

98 65 40 98 65 41 134

021285 021292


98

98 Insulating Mats from rubber

Article-No. 9 EAN-

4003773- mm

026600 026617



9 Dimensions

Code

98 67 05 98 67 10

VDE 0680/1

1000 V

500 x 500 1000 x 1000

왘 for protection when working live or close to live parts 왘 tested according to VDE 0680/1

Thickness mm 1.6 1.6

98

g 460 1940

98 67 05

98 Junior Hacksaw IEC 60900 DIN EN 60900

Article-No. 9 EAN-

Length mm 150

4003773-

98 90



9 saw blade

Code 028321

Length mm 240

왘 saw blade for metal and wood with 25 teeth per inch, exchangeable 왘 tested according to DIN EN/IEC 60900

g 170

98 90

98

98 Compact Tool Case,

17 parts

with safety tools

Article- 0 EANNo. 0 Code

IEC 60900 DIN EN 60900

0 Contents: 0 Article 0 Article-No. 0

왘 shock-resistant plastic case 왘 containing a range of conventional KNIPEX safety tools, tested according to DIN EN/IEC 60900

Length/Size

4003773-

98 99 11 026624

03 07 200 70 07 160 98 20 35 98 20 40 98 20 55 98 24 00 98 42 98 45 125 98 45 250 98 47 10 98 47 11 98 47 12 98 47 13 98 47 14 98 47 17 98 47 19 98 52

Combination Plier Diagonal Cutter Screwdriver, for slotted screws Screwdriver, for slotted screws Screwdriver, for slotted screws Screwdriver, Phillips Reversible Ratchet Extension Bar Extension Bar Hexagon Socket 1 " 2 Hexagon Socket Drive Hexagon Socket Hexagon Socket Hexagon Socket Hexagon Socket Hexagon Socket Cable Knife

200mm 160mm 3.5mm 4.0mm 5.5mm Gr. 0 265mm 125mm 250mm SW 10mm SW 11mm SW 12mm SW 13mm SW 14mm SW 17mm SW 19mm 180mm

98 99 11 135


98

98 Standard Tool Case,

26 parts

with safety tools

Article- 0 EANNo. 0 Code

IEC 60900 DIN EN 60900

0 Contents 0 Description 0 Article-No. 0

왘 shock-resistant plastic case 왘 containing a range of conventional KNIPEX safety tools, tested according to DIN EN/IEC 60900

Length/Size

4003773-

98 99 12 026631

03 07 200 70 07 160 98 00 10 98 00 11 98 00 12 98 00 13 98 00 14 98 00 17 98 00 19 98 20 28 98 20 35 98 20 40 98 20 55 98 24 00 98 24 01 98 24 02 98 40 98 47 10 98 47 11 98 47 12 98 47 13 98 47 14 98 47 17 98 47 19 98 52 98 53 03

Combination Plier Diagonal Cutter Open End Wrench Open End Wrench Open End Wrench Open End Wrench Open End Wrench Open End Wrench Open End Wrench Screwdriver, for slotted screws Screwdriver, for slotted screws Screwdriver, for slotted screws Screwdriver, for slotted screws Screwdriver, Phillips Screwdriver, Phillips Screwdriver, Phillips T-Handle Drive Hexagon Socket 1 " 2 Hexagon Socket Drive Hexagon Socket Hexagon Socket Hexagon Socket Hexagon Socket Hexagon Socket Cable Knife Dismantling Knife

200mm 160mm SW 10mm SW 11mm SW 12mm SW 13mm SW 14mm SW 17mm SW 19mm 2.8mm 3.5mm 4.0mm 5.5mm 00 01 02 200mm SW 10mm SW 11mm SW 12mm SW 13mm SW 14mm SW 17mm SW 19mm 180mm 155mm

98 98 Tool Roll,

98 99 12

15 parts

with safety tools

ArticleNo.

0 EAN0 Code

0 Contents 0 Article-No.

IEC 60900 DIN EN 60900

0 Description 0

Length/Size

4003773-

98 99 13

026648

03 07 200 11 17 160 26 17 200 70 07 160 95 06 230 98 00 10 98 00 13 98 00 14 98 00 17 98 00 19 98 20 28 98 20 40 98 20 55 98 20 65 98 52

136

Combination Plier Wire Stripper Snipe Nose Side Cutting Plier Diagonal Cutter Cabel Shears Open End Wrench Open End Wrench Open End Wrench Open End Wrench Open End Wrench Screwdriver Screwdriver Screwdriver Screwdriver Cable Knife

200 mm 160 mm 200 mm 160 mm 230 mm SW 10 mm SW 13 mm SW 14 mm SW 17 mm SW 19 mm 2.8 mm 4.0 mm 5.5 mm 6.5 mm 180 mm

98 99 13

왘 containing a range of conventional KNIPEX safety tools, tested according to DIN EN/IEC 60900 왘 hard-wearing polyester fabric 왘 with practical, adjustable quick-release fastener


98

98 Universal Tool Case BIG TWIN,

46 parts

with safety tools

Article- 0 EANNo. 0 Code

IEC 60900 DIN EN 60900

0 Contents 0 Article 0 Article-No. 0

Length/Size

4003773-

98 99 14 026655

03 07 200 11 17 160 70 07 160 88 07 250 95 17 200 98 00 10 98 00 13 98 00 14 98 00 17 98 00 19 98 00 22 98 01 10 98 01 13 98 01 14 98 01 17 98 01 19 98 01 22 98 20 28 98 20 40 98 20 55 98 20 65 98 40 98 42 98 45 125 98 45 250 98 47 10 98 47 11 98 47 12 98 47 13 98 47 14 98 47 17 98 47 19 98 47 22 98 47 24 98 52 98 53 03 98 64 02 98 65 40 98 67 05

Combination Plier 200mm Wire Stripper 160mm Diagonal Cutting Nipper 160mm Water Pump Plier ”Alligator“ 250mm Cable Shear 200mm Open End Wrench SW 10mm Open End Wrench SW 13mm Open End Wrench SW 14mm Open End Wrench SW 17mm Open End Wrench SW 19mm Open End Wrench SW 22mm Box Wrench SW 10mm Box Wrench SW 13mm Box Wrench SW 14mm Box Wrench SW 17mm Box Wrench SW 19mm Box Wrench SW 22mm Screwdriver, for slotted screws 2.8mm Screwdriver, for slotted screws 4.0mm Screwdriver, for slotted screws 5.5mm Screwdriver, for slotted screws 6.5mm T-Handle Drive 165mm Reversible Ratchet 265mm Extension Bar 125mm Extension Bar 250mm Hexagon Socket SW 10mm Hexagon Socket SW 11mm 1 " 2 Hexagon Socket SW 12mm Drive Hexagon Socket SW 13mm Hexagon Socket SW 14mm Hexagon Socket SW 17mm Hexagon Socket SW 19mm Hexagon Socket SW 22mm Hexagon Socket SW 24mm Cable Knife 180mm Dismantling Knife 155mm 6 Insulating Plastic Clamps 150mm 1 Pair Electricans’ Gloves Size 9 3 Insulating Mats 500 x 500 x 1.6mm

왘 containing a range of conventional KNIPEX safety tools as well as insulating mats, clamps and gloves, tested according to DIN EN/IEC 60900 왘 heavy duty ABS material, red 왘 circular aluminium frame with D-shape rings to fix a belt; with integral, sturdy center board with push-in compartments on both sides

왘 can be opened on one or both sides; bottom tray and cover can be opened independently 왘 stands securely in any opening position due to lid-holders on both sides, that register in a position of 45° and 90° 왘 3-digit-lock, 2 tilting locks fixing the bottom tray, 2 turnbuckles fixing the lid 왘 removable document compartment and tools board in the lid; can be equipped on one side 왘 30 kg maximum load 왘 ext. dimensions ( W x H x D): 560 x 220 x 410 mm int. dimensions (W x H x D): 445 x (105 + 105) x 350 mm height of base tray 58 mm

98 99 14

Model 99 Concretor’s Nippers see Page 55 137


00 11

00 11 02/03 Control Cabinet Keys for all standard cabinets and shut-off systems

왘 for control cabinets and shutoff systems in the supply of gas, water and electricity 왘 for technical installations in buildings, e. g. air conditioning and ventilation systems, shut-off valves, mains switch-boards, etc. 왘 square 6 + 8 mm 왘 triangular 9 mm

왘 two-way key bit 9 mm dia. 왘 with bit insert: slot 1.0 x 7 mm and cross recess PH 2 왘 with adapter for 1/4" bits on securing chain 왘 zinc die-casting Model 00 11 02: 왘 short execution, total length 44 mm

00 11 03 Article-No. 9 EAN-



9 Capacity

Code 4003773-

00 11 02 00 11 03

048947 041658

mm 6/8 5/6/8

mm 9 9

00 11

Ø mm

9 9

Length mm 44 76

g 50 80

Model 00 11 03: 왘 long execution, total length 76 mm 왘 additional square of 5 mm

00 11 04 Profi Key for all standard shut-off systems

왘 key for heating, airconditioning, sanitary and building engineering, e. g. for door and window handles or for air bleeding heaters 왘 square 5/7/8 mm 왘 triangular 10 mm 왘 conical square

왘 with bit insert: slot 1.0 x 7 mm and cross recess PH 2 왘 with adapter for 1/4" bits on securing chain 왘 total length: 90 mm 왘 zinc die-casting

00 11 04 Article-No. 9 EAN-



9 Capacity

Code 4003773-

00 11 04

048954

mm 5/7/8

mm 10

0019

mm 4-10

Length mm 90

g 75

00 19 Display Panel

왘 for 12 x 3 pliers 왘 empty, without pliers and hooks 왘 assortment on request 왘 when ordering do always ask for hooks (12 x 00 19 33) and product detail labels 왘 material: sheet steel, white powder coated, with coloured label

00 19 00 LE Article-No. 9 EAN-

9 Content

Code 4003773-

00 19 00 LE 034483

empty

9 9 Width mm 480

9 9 Height mm 640

 g 3,400

139


0019 00 19 Sales Displays

왘 for 6, 12 or 24 pliers 왘 small size, mimum space required on the point of sales 왘 with explanatory header 왘 variable assortment on request 왘 when ordering 00 19 14 - 19 do always ask for product specific header (see table) 왘 material: solid cardboard, printed

200

200

200 200

Model 00 19 23: 왘 attractive counter display with 24 pliers 왘 pliers with two-colour dual component handles

360 200 110

110

00 19 19

9 Article

C320 00033 C320 00044

86 03 180 86 03 250 87 01 250 26 22 200 74 02 160 87 02 250 for 86 03 for 87 01

6 6 12 each 8 units

mm 110 110 110 230

mm 200 200 200 310

mm 200 200 360 260



header available in D, GB, F, E, NL, S, I header available in D, GB, F, E, NL, S, I

4003773-

00 19 20 00 19 20 T 00 19 21 T

140

024637 0231192 027461

A superior tool for gripping, holding and bending workpieces up to 35/46 mm across flats. Parallel action smooth jaws for the gentle assembly of fittings. Fast push button adjustment on the workpiece. The cam action on the gripping jaws allows fast working without adjusting the tool.

PUSH·BUT

Pipe grip and spanner in one. 1 max. 30 mm / 15/4" = 87 01 180 36 mm / 1 /8" = 87 01 250

Push-button-action for fast adjustment directly on the workpiece. Selfgripping on pipes and nuts, non-slip during use. Handguard prevents handles from pinching and knuckle busting.

Art.-No. 87 01 180 = Length 180 mm / 7” Art.-No. 87 01 250 = Length 250 mm / 10”

Art.-No. 86 03 180 = length 180 mm / 7” Art.-No. 86 03 250 = length 250 mm / 10”

C320 00044

Model 00 19 20: 왘 for testing the self-locking function of the "Alligator" and "Cobra"water pump pliers 왘 steady stand, high stability 왘 without pliers Model 00 19 20 T: 왘 for testing the self-locking function of the "Alligator" and "Cobra"water pump pliers 왘 collapsible for space saving transport 왘 without plier

00 19 20 T

Code

C320 00033

0019 Article-No. 9 EAN-

3 outstanding features which save time and money!

86 03 180 = max. 35 mm / 13/8" 86 03 250 = max. 46 mm / 13/4"

g 1,820 3,610 3,990 6,695

”Cobra” Water Pump Plier

Plier Wrench PUSH·BUT

00 19 Test Supports

00 19 20

KNIPEX Quality - Made in Germany

KNIPEX Quality - Made in Germany

N·ACTION

029625 027362 013365 050377

9 9 Depth

TO

4003773-

00 19 14 00 19 17 00 19 19 00 19 23

9 9 Height

N·ACTION

Code

9 9 Width

TO

9 9 Units

C 320 00044GB

Article-No. 9 EAN-

C 320 00033GB

00 19 17

Model 00 19 39: 왘 hook for sales displays see page 146

00 19 21 T 9 9 Width mm 230 148 85

9 9 Height mm 165 225 85

9 9 Depth mm 310 135 150

 g

1,350 750 720

Model 00 19 21 T: 왘 for testing the ratchet principle of Plier Wrenches and multiple Slip Joint Spanner 왘 can be fixed on the wall 왘 without plier


0019 00 19 Sales Display

415 mm

왘 for 5 x 6 pliers 왘 small size, mimum space required on the point of sales 왘 with informative header and slide-in strip for product detail labels 왘 assortment on request 왘 when ordering, do always ask for product detail header (see table) and product detail labels 왘 without pliers 왘 material: steel wire, silver powder coated

KNIPEX Quality – Made in Germany

C320 00110

C320 00110, general programme KNIPEX Quality – Made in Germany

C320 00187

00 19 24

C320 00187, Comfort

Article-No. 9 EAN-

9 Header

Code

9 9 Height

mm 325

4003773-

00 19 24 029656 C320 00110 C320 00187 C320 00242

9 9 Width

mm 415



9 9 Depth

KNIPEX Quality – Made in Germany

1000 V

mm 190

g

DIN EN 60 900 IEC 60 900

780

general programme Comfort, for pliers with two-colour dual component sleeves VDE insulated pliers C320 00242

0019

C320 00242, VDE

00 19 Sales Display

KNIPEX Quality – Made in Germany

KNIPEX Quality – Made in Germany

Ø 12 - 25 mm (J1) Ø 19 - 60 mm (J2)

400 mm

C320 00132

C320 00132, general programme

Ø 10 - 25 mm (A1) Ø 19 - 60 mm (A2)

C320 00231

C320 00231, Precision Circlip Pliers 48/49

KNIPEX Quality – Made in Germany

00 19 25

C320 00187

C320 00176, Comfort

Article-No. 9 EANCode 4003773-

00 19 25 014027 C320 00132 C320 00176 C320 00231

9 Header

9 9 Width

9 9 Height

mm 490

mm 400

9 9 Depth mm 310

 g

3,800

왘 for 8 x 7 pliers 왘 solid style; can be fixed on tool bar systems, also suitable as counter display 왘 with informative header and slide-in strip 왘 assortment on request 왘 when ordering, do always ask for product detail header (see table) 왘 without pliers 왘 material: sheet steel/ steel wire, silver powder coated

general programme Comfort, for pliers with two-colour dual component handles Precision Circlip Pliers 48/49

141


0019 00 19 Rotary Sales Stand 왘 for 16 x 3 pliers 왘 attractive, compact rotary construction for the counter 왘 with 16 hooks 00 19 33 왘 assortment on request

Article-No. 9 EANCode 4003773-

00 19 28

032083

왘 when ordering, do always ask for product detail labels 왘 without pliers 왘 material: sheet steel/ steel wire, white powder coated

9 9 Ø mm 400



9 9 Height mm 610

g 5,050

00 19 28

0019 00 19 Sales Display

for ”Cobra“ Water Pump Pliers

왘 attractive sales display for presentation of the complete ”Cobra“-family 왘 suitable for assembly to tool bar systems 왘 equipped with base for counter sale 왘 with integrated brochure holder for ”Cobra“ leaflets 왘 with transparent label holders 왘 please do always request leaflets and labels 왘 includes 3 ”Cobras“ each 87 01 180/250/300/400/560 왘 Material: solid steel wire, powder coated, silver Model 00 19 29 LE: 왘 without pliers

00 19 29 Article-No. 9 EANCode

9 Contents Article

4003773-

00 19 29 00 19 29 LE 142

052340

3 pliers each 87 01 180/250 87 01 300/400/560 without pliers

9 9 Width mm 610

9 9 Height mm 445

9 9 Depth mm 250

 g 17,000


0019 00 19 Sales Display 왘 for 3 x 6 pliers 왘 solid style; can be fixed on tool bar systems, also suitable as counter display 왘 with informative header and slide-in strip 왘 assortment on request 왘 when ordering, do always aks for product detail header (see table) 왘 without pliers Article-No. 9 EAN4003773-

C320 00 264 C320 00 275 C320 00 286 C320 00 297 C320 00 308 C320 00 319 C320 00 330 C320 00 352 C320 00 363

054450 054467

Model 00 19 34 4: 왘 for finish of pliers 2; 5; 6

9 Description

Code

00 19 34 3 00 19 34 4

Model 00 19 34 3: 왘 for finish of pliers 0; 1; 3; 4

 9 9 9 9 Width 9 Height 9 Depth

mm mm for finish 0; 1; 3; 4 240 320 for finish 2; 5; 6 240 320 High Leverage Pliers Precision Circlip Pliers 48/49 Concretors` Nippers ”Cobra“/Plier Wrench Insulated Pliers, VDE Stripping and Crimping Pliers general programme Slip Joint Spanner Self-Adjusting Insulation Strippers

mm g 310 2,110 310 2,110

00 19 34 3

C320 00264

C320 00275

C320 00286

C320 00297

C320 00308

C320 0319

C320 00330

C320 00352

C320 00363

00 19 34 4 143


0019

00 19 Tool Bar (Pegboard) and Accessories

L130 00209

L130 00198

2200 mm

Blister packaging

Carded Packaging: 왘 user friendly presentation 왘 space saving and informative 왘 possibility of testing the plier 왘 material: solid and firm Clip, reinforced cardboard

1000 mm

Model 00 19 30: 왘 for the promotional, extensive presentation 왘 completely with supports, 5 peg boards, shelf and illuminated transparent advertising facia 왘 can be equipped either with self-service packaging plier holders and/or sales displays Article-No. 9 EAN-

왘 with power cable and 230 V plug 왘 material: sheet steel / steel tubing, silver powder coated

9 Description

Code 4003773-

00 19 30 00 19 30 2 00 19 30 3 00 19 30 6 00 19 30 66 00 19 30 7 L130 00209 L130 00198 144

024644 046783 052524 034506 055211 034810

tool bar with illuminated facia illuminated facia tool bar without illuminated facia self-adhesive plastic label tool bar without illuminated facia advertising facia VDE-guidance label Comfort-guidance label

Model 00 19 30 3: 왘 without illuminated facia Model 00 19 30 66: 왘 tool bar 660 mm width, without illuminated facia 왘 with magnetic advertising facia

9 9 Width

9 9 Height

mm 1000 1000 1000 1300 660 1300 980 980

mm 2200 200 2200 200 2200 200 100 100

9 9 Depth mm 500 400 500



g 68,050 11,450 56,600

500

00 19 30 66


Model 00 19 30 2: 왘 illuminated facia for tool bar systems 왘 solid aluminium frame with transparent plastic advertising facia, power cable and 230 V plug / series plug

2200 mm

Model 00 19 30 6: 왘 self-adhesive plastic label 왘 suitable for 1,000 and 1,300 mm wide promotional surfaces

Model 00 19 30 7 왘 advertising facia made of 0.5 mm sturdy plastic 왘 suitable for 1,000 and 1,300 mm wide promotional surfaces

0019 00 19 Show-Cabinets 왘 with two glass sliding doors, lockable 왘 illumination unit with plug for series connection 왘 with power cable and 230 V plug 왘 material: aluminium section, silver colour

Model 00 19 30 VIT: 왘 hanging show-cabinet for assembly to tool bar systems 왘 with shelf, top cover and transparent advertising facia 왘 easy to assemble collapsible frame construction Article-No.

9 EANCode 4003773-

00 19 30 VIT 024644 00 19 30 VIT1 046783 00 19 30 VIT2 034506

for Product Presentation 2200 mm

Model 00 19 30 VIT1: 왘 basic show-cabinet for assembly to tool bar systems 왘 with top cover and transparent advertising facia Model 00 19 30 VIT2: 왘 unit show-cabinet for assembly to tool bar systems, for extension of basic show-cabinet 00 19 30 VIT1 왘 with top cover and transparent advertising facia

9 Description

9 9 9 9 Width 9 Height 9 Depth

mm hanging show-cabinet 1000 basic show-cabinet 1000 unit show-cabinet 1000

mm 1200 2070 2070

mm 300 470 470

00 19 30 VIT

00 19 30 VIT 1

00 19 30 VIT 2 145


00 19 00 19 Hooks

00 19 31

Model 00 19 31: 왘 160 mm length 왘 for 6 pliers, with faceplate for label 왘 when ordering, do always ask for product detail labels

for tool bar systems

Model 00 19 33: 왘 90 mm length 왘 for 3 pliers, with with faceplate for label 왘 when ordering, do always ask for product detail labels

00 19 35 1 / 00 19 35 3

Model 00 19 33 2: 왘 200 mm length 왘 heavy duty for mounting pipe wrenches, etc. 왘 with pivoting clamping device for easy tastening and release

00 19 39

Model 00 19 35 1/3: 왘 200 mm length 왘 for holding self-service packs with Euro standard perforations 왘 with pivoting clamping device for easy tastening and release

00 19 33

00 19 33 2

00 19 35 2

Article-No. 9 EAN-

9 9 Hole spacing

Code 4003773-

00 19 31 00 19 33 00 19 33 2 00 19 35 1 00 19 35 2 00 19 35 3 00 19 39

014874 014881 042112 045168 028284 051787 034827

for 6 pliers for 3 pliers for large size water pump pliers, pipe wrenches, etc. for self-service packs for brochures and carded tools for self-service packs for sales displays 00 19 14 - 00 19 19

Article-No. 9 EANCode 4003773-

00 19 36 146

024682

mm 30 30 30 25 30 30 variable

9 9 Depth mm 160 90 200 200 50 200 200

 g

90 70 145 100 10 100 320

Model 00 19 39: 왘 suspension device for sales displays 00 19 14; 00 19 17 for presentation on tool bar systems 왘 material: steel wire, silver powder coated

0019 00 19 Brochure Holder

Model 00 19 35 2: 왘 50 mm length 왘 for holding self-service carded packs and brochures with Euro standard perforations

for tool bar systems 왘 for approx. 250 pcs. A4-size leaflets 왘 material: steel wire, silver powder coated

9 9 Width mm 230

9 9 Height mm 290

9 9 Depth mm 90

 g

255

00 19 36


0019 00 19 Plier Racks

왘 for the space saving presentation of pliers on tool bar systems 왘 with slide-in strip for product labels 왘 when ordering, do always ask for product detail labels 왘 material: sheet steel/ wire, silver powder coated

for tool bar systems

Model 00 19 32: 왘 for 3 x 6 pliers Model 00 19 34: 왘 for 5 x 6 pliers Model 00 19 34 1: 왘 for 5 x 6 carded pliers 왘 for the space saving presentation of pliers on tool bar systems 왘 with header sign

00 19 34

Model 00 19 34 2: 왘 for 15 x 6 pliers

00 19 34 1

Article-No. 9 EAN-

9 9 Width

Code 4003773-

00 19 32 00 19 34 00 19 34 1 00 19 34 2

024651 024668 051824 024668

for 3 x 6 pliers for 5 x 6 pliers for 5 x 6 pliers (carded) for 15 x 6 pliers

mm 195 325 480 995

9 9 Height mm 98 98 200 145

9 9 Depth mm 175 175 225 215

 g

380 620 1,000 1,960

00 19 34 2 147


0019 00 19 Tool Roll, 11 parts

왘 for telecommunications and electrical engineers 왘 contains 8 pliers and 3 scewdrivers 왘 pliers with chrome plated heads and two-colour dual component handles

Article-No. 9 EANCode

9 Contents Article

왘 screwdrivers VDE tested according to DIN/IEC 60900 왘 material: soft, hard wearing plastic

00 19 41

9 9 Units

4003773-

00 19 41

024729

03 05 160 11 15 160 25 05 160 30 15 160 30 35 160 31 15 160 67 05 140 70 05 140 98 20 28 98 20 40 98 24 01

Combination Plier Wire Stripper Chain Nose Side Cutting Plier Long Nose Plier, flat-wide Long Nose Plier, round Needle Noser Plier, straight High Leverage End Cutting Nipper Diagonal Cutter Screwdriver, width of blade 2.8 mm Screwdriver, width of blade 4.0 mm Cross Slot Screwdriver, Size 1 (Phillips)

00 19

왘 for telecommunications and electrical engineers 왘 practical compartments for pliers, screwdrivers and tape rule 왘 with snap hooks and holder for insulation tape 왘 material: hard wearing, strong butt leather

00 19 Tool Pouch

Article-No. 9 EAN-

1 1 1 1 1 1 1 1 1 1 1



9 Arrangement

Code 4003773-

00 19 48

024767

00 19 48

g

5 pockets

350

00 19 00 19 Circlip Pliers Sets, 4 parts

왘 tool roll equipped with 4 common Circlip Pliers for internal and external circlips 왘 hard-wearing polyester fabric 왘 with practical, adjustable quick-release fastener

Article-No. 9 EANCode

9 Contents Article

9 9Ø

4003773-

00 19 56

030973

00 19 57

050056

148

44 11 J2 44 21 J21 46 11 A2 46 21 A21 48 11 J1 48 11 J2 49 11 A1 49 11 A2

straight bent straight bent straight straight straight straight

mm 19 - 60 19 - 60 19 - 60 19 - 60 12 - 25 19 - 60 10 - 25 19 - 60

Model 00 19 57: 왘 contains 4 common Precision Circlip Pliers for highest requirements

00 19 56 Circlip Pliers 9 9 Units 1 1 1 1 1 1 1 1

00 19 57 Precision Circlip Pliers


00 20

00 20 Precision Circlip Pliers Set, 4 parts sturdy plastic packaging

Articla-No. 9 EANCode

왘 attractive sales packaging with Euro standard perforation 왘 contains 4 common Precision Circlip Pliers for highest requirements 왘 sturdy plastic packaging, also suitable for storage of the pliers

9 Contents Article

9 9Ø mm 12 - 25 19 - 60 10 - 25 19 - 60

4003773-

00 20 03 SB 030973

00 19 56

48 11 J1 48 11 J2 49 11 A1 49 11 A2

9 9 Units 1 1 1 1

00 20

00 20 03 SB

00 20 Pliers Sets

220 mm

295 mm

Modell 00 20 10: 왘 pliers with polished heads and plastic coated handles

Article-No. 9 EAN-

Modell 00 20 11: 왘 pliers with two-colour dual component handles

9 Description

Code

9 Contents Article

4003773-

Modell 00 20 12: 왘 all pliers VDE-tested according , to DIN EN 60900 pliers finish 6

Modell 00 20 13: 왘 all tools VDE-tested according , to DIN EN 60900 pliers finish 6



왘 attractive sales packaging with Euro standard perforation 왘 material: sturdy cardboard packaging, printed

g

00 20 10

010388

Power Pack

00 20 11

012405

Assembly Pack

00 20 12

012412

Safety Pack

00 20 13

043287

VDE Tool Set

02 01 180 74 01 160 87 01 250 03 02 180 26 12 200 70 02 160 03 06 180 26 16 200 70 06 160 26 16 200 70 06 160 WERA 160i 0.6 x 3.5 x 100 WERA 160i 1.0 x 5.5 x 125 WERA 162i PH2 x 100

440

750

800

885

149


00 20 00 20 Electronics Pliers Sets for working on electronic components

00 20 17

00 20 16 왘 7 parts, contains 6 electronics pliers and one precision tweezer 왘 case made of hard wearing plastic, pliers are held by elastic band, with zip fastener

왘 6 parts, contains 6 ESD electronics pliers, electrically discharging version 왘 case made of hard wearing plastic, pliers are held by elastic band, with zip fastener

00 20 18 ESD 왘 8 parts, contains 2 electronics pliers and 6 electronics scewdrivers, ESD electrically discharging version 왘 practical storage box, shockresistant plastic, with foam insert

00 20 18 왘 8 parts, contains 2 electronics pliers and 6 electronics screwdrivers 왘 practical storage box, shockresistant plastic, with foam insert

Article-No. 9 EANCode

9 Contents Article

9 Description

4003773-

00 20 16

022619

00 20 17

031222

00 20 18

033073

00 20 18 ESD 051848

150

 g

35 12 115 | 35 22 115 | 35 32 115 | 64 32 120 | Electronics Pliers Case 77 02 115 | 77 42 115 | 92 34 36 35 12 115 ESD | 35 22 115 ESD | 35 42 115 ESD | ESD-Pliers Case 64 32 120 ESD | 77 02 115 ESD | 77 32 115 ESD 35 22 115 | 77 02 115 | Electronics Box Screwdriver 0.4 x 2.5/0.5 x 3/0.6 x 3.5/0.8 x 4.0 mm - PH 0/PH 1 35 22 115 ESD | 77 02 115 ESD | ESD-Electronics Box Screwdriver ESD 0.4 x 2.5/0.5 x 3/0.6 x 3.5/0.8 x 4.0 mm - PH 0/PH 1

610 590 450 450


00 20 00 20 Tool Box, 4 parts

왘 all pliers VDE tested according DIN/IEC 60900 finish 6 왘 high quality, versatile, shock-resistant plastic case (Model 00 21 15 LE) 왘 foam insert with honeycomb structure for variable equipment 왘 other assortment on request

with VDE tools

00 20 15

Article-No. 9 EANCode

9 Contents Article



03 06 180 11 06 160 26 16 200 70 06 160

1,500

4003773-

00 20 15

024804

g

00 21 00 21 Tool Box, 7 parts

왘 all pliers except Water Pump Pliers VDE tested according DIN/IEC 60900 왘 high quality, versatile, shock-resistant plastic case (Model 00 21 15 LE) 왘 foam insert with honeycomb structure for variable equipment 왘 other assortment on request

for electrical contractors

Model 00 21 15 LE: 왘 without tools 왘 external dimensions (WxHxD): 327x65x275 mm

00 21 15 Article-No. 9 EANCode

9 Contents Article

4003773-

00 21 15

00 21 15 LE

042853

 g

03 06 180 26 16 200 70 06 160 88 03 180 WERA 0.4 x 2.5 WERA 0.8 x 4.0 WERA PH1 empty

1,500

532

151


00 21 00 21 Tool Bag, 24 parts

왘 contains 24 brand name quality tools, partly VDE tested according to DIN EN/IEC 60900, 1000 V 왘 comfortable case of hardwearing leather, with front bag, adjustable retaining loops and belt 왘 with galvanised steel base tray 왘 edges of the tool case reinforced with aluminium 왘 internal dimensions (W x H x D): 420 x 250 x 160 mm

for electrical contractors, Top Model

00 21 01 TL

ArticleNo.

0 EAN0 Code

0 Contents 0 Contents 0 Article-No. 0 Description

0 Manu0 facturer

0 Nominal 0 size

g 6560

4003773-

00 21 01 TL 032694 03 06 180 25 06 160 70 06 160 11 06 160 98 52 SB 160i

Combination Plier Chain Nose Side Cutting Plier Diagonal Cutter Wire Stripper Cable knife Safety Screwdriver for slotted screws

KNIPEX KNIPEX KNIPEX KNIPEX KNIPEX WERA

162i

Safety Screwdriver for Phillips screws Cable Knife with hook blade Junior Hack Saw Screwdriver for slotted screws Voltage Tester Fitters Hammer Chisel Hammer Water Brush Painter’s Knife Metre Rule (inch rule) Electrician’s Chisel Bolster Chisel Plaster Duct

WERA

IEC 60900 DIN EN 60900

16 20 165 98 90 S 334 247 101 30490800 75040-015 75075-040 71510-000 3612521 3403001 7165/50

152



KNIPEX KNIPEX WERA WERA Treff PICARD PICARD PICARD PICARD RENNSTEIG RENNSTEIG

180 mm 160 mm 160 mm 160 mm 180 mm 2.5 x 80 mm 3.5 x 100 mm 5.5 x 125 mm 6.5 x 150 mm PH 1/80 mm PH 2/100 mm 165 mm 130 mm 6.0 x 125 mm 6.5 x 150 mm 3.5 x 100 mm 300 g 800 g 40 mm 40 mm 2m 250 x 10 mm 300 mm 125 x 90 mm


00 21 00 21 Tool Bag, 24 parts

왘 contains 24 brand name quality tools, partly VDE tested according to DIN EN/IEC 60900, 1000 V 왘 tool bag with side walls and bottom tray made of impact and moisture resistant double wall HDPE material 왘 front, rear and lid made of calf leather, black 왘 semi-fold-out front with adjustable loops and exterior document compartment 왘 front additionally reinforced with aluminium brackets 왘 internal dimensions (W x H x D): 420 x 250 x 160 mm

apprentices tool bag for electrical contractors

Model 00 21 02 LE: 왘 without tools

00 21 02 SL

ArticleNo.

0 EAN0 Code

0 Contents 0 Contents 0 Article-No. 0 Description

0 Manu0 facturer

0 Nominal 0 size

g 6.960

4003773-

00 21 02 SL 032687

IEC 60900 DIN EN 60900

03 05 180 25 05 160 70 05 160 11 05 160 16 20 165 98 90 S 98 52 SB 660i

Combination plier Chain Nose Side Cutting Plier Diagonal Cutter Wire Stripper Cable Knife with hook blade Junior Hack Saw Cable Knife Safety Screwdriver for slotted screws

KNIPEX KNIPEX KNIPEX KNIPEX KNIPEX KNIPEX KNIPEX WERA

662i

Safety Screwdriver for Phillips screws Safety Screwdriver for Pozidriv screws Voltage Tester Fitters Hammer Mallet Water Brush Painter’s Knife Carpenter’s Pencil Electrician’s Chisel Bolster Chisel Plaster Duct

WERA

665i

00 21 02 LE 057499



247 0000 101 0000 401 75040-015 75075-040 71501-024 3612521 3402501 7165/50 empty

WERA WERA PICARD PICARD PICARD PICARD PICARD RENNSTEIG RENNSTEIG

180 mm 160 mm 160 mm 160 mm 165 mm 130 mm 180 mm 2.5 x 80 mm 3.5 x 100 mm 5.5 x 125 mm 6.5 x 150 mm PH 1/80 mm PH 2/100 mm PZ 1/80 mm PZ 2/100 mm 3.5 x 100 mm 300 g 1000 g 40 mm 40 mm 24 cm 250 x 10 mm 250 mm 125 x 90 mm 2.600

153


00 21 00 21 Tool Case “Elektro”,

20 parts 왘 with 20 brand name tools, partly VDE tested according to DIN EN/IEC 60900 왘 comfortable presentation with bottom tray (height 58 mm), cover plate, document compartment and lid holder 왘 hard-wearing execution of ABS material, with circular double aluminium frame, register hinges, 2 tilting locks 왘 strong, ergonomic handle 왘 20 kg maximum load 왘 cover and tool plate made of Con-Pearl® material 왘 internal dimension (W x H x D): 465 x 170 x 310 mm Model 00 21 20 LE: 왘 without tools

00 21 20

ArticleNo.

0 EAN0 Code

0 Contents 0 Description 0 Article-No. 0

0 Manu0 facturer

0 Nominal 0 size

00 21 20

051084

IEC 60900 DIN EN 60900

IEC 60900 DIN EN 60900

03 06 180 26 16 200 26 26 200 70 06 160 74 06 200 95 16 200 98 56 12 40 200 16 80 125 SB 86 03 180 87 03 250 160i

162i 165i 247

00 21 20 LE 044567

154

 g 7750

4003773-

empty

Combination Plier Snipe Nose Side Cutting Plier Snipe Nose Side Cutting Plier, bent Diagonal Cutter High Leverage Diagonal Cutter Cable Shear Cable Knife Self-Adjusting Insulation Strippers Universal Stripping tool Plier Wrench ”Cobra“ Water Pump Plier Screwdriver for slotted screws for slotted screws for slotted screws for slotted screws for Phillips screws for Phillips screws for Pozidriv screws for Pozidriv screws Voltage Tester

KNIPEX KNIPEX KNIPEX KNIPEX KNIPEX KNIPEX KNIPEX KNIPEX KNIPEX KNIPEX KNIPEX

180 mm 200 mm 200 mm 160 mm 200 mm 200 mm 185 mm 200 mm 125 mm 180 mm 250 mm

WERA WERA WERA WERA WERA WERA WERA WERA WERA

2.5 x 0.4 mm 4.0 x 0.8 mm 5.5 x 1.0 mm 6.5 x 1.2 mm PH 1 x 80 mm PH 2 x 100 mm PZ 1 x 80 mm PZ 2 x 100 mm 3 x 70 mm 3600


00 21 00 21 Tool Case for the E-CHECK®, 23 parts

왘 contains 23 brand name tools 왘 hard-wearing ABS hard-shell construction with aluminium frame and surrounding 왘 document compartment and pen holding straps 왘 1 removable tool plate, with elastic loops on both sides 왘 1 cover plate with elastic loops and tool protection cloth 왘 large base tray with variable seperations (e. g. for measuring and testing devices) internal dimensions: 420 x 320 x 85 mm 왘 sturdy metal locks and 3-digitlock 왘 ergonomical handle 왘 feet on two sides 왘 colour: silver / aluminium look

00 21 30

ArticleNo.

0 EAN0 Code

0 Contents 0 Contents 0 Article-No. 0 Tools

0 Nominal 0 size

 g 6560

4003773-

00 21 30

0 Manu0 facturer

051084 03 06 180 26 16 200 26 26 200 70 06 125 70 06 160 98 56 92 27 62 160i

Combination Plier KNIPEX 180 mm Snipe Nose Side Cutting Plier KNIPEX 200 mm Snipe Nose Side Cutting Plier, bent KNIPEX 200 mm Diagonal Cutter KNIPEX 125 mm Diagonal Cutter KNIPEX 160 mm IEC 60900 Cable Knife, with protecting cap KNIPEX 180 mm DIN EN 60900 Precision Tweezer KNIPEX 150 mm Screwdriver for slotted screws WERA 2.5 x 80 mm for slotted screws WERA 3.5 x 100 mm for slotted screws WERA 4.0 x 100 mm for slotted screws WERA 5.5 x 125 mm for slotted screws WERA 6.5 x 150 mm for slotted screws WERA 8.0 x 175 mm 162i for Phillips screws WERA PH 0 x 80 mm for Phillips screws WERA PH 1 x 80 mm for Phillips screws WERA PH 2 x 100 mm 165i for Pozidriv screws WERA PZ 1 x 80 mm for Pozidriv screws WERA PZ 2 x 100 mm 16 80 125 SB Universal Stripping Tool KNIPEX 125 mm 12 40 200 Self-Adjusting Insulation Stripper KNIPEX 200 mm 86 03 180 Plier Wrench KNIPEX 180 mm 87 03 250 ”Cobra“ Water Pump Plier KNIPEX 250 mm 00 11 03 Control Cabinet Key KNIPEX 76 mm All rights reserved for technical alterations. Testing and measuring devices as well as the Laptop are not included in delivery

The spacious base tray is suitable for holding measuring and testing devices or a Laptop

155


Article-No. 00 11 02 00 11 03 00 11 04 00 19 00 LE 00 19 14 00 19 17 00 19 19 00 19 20 00 19 20 T 00 19 21 T 00 19 23 00 19 24 00 19 25 00 19 28 00 19 29 00 19 30 00 19 30 2 00 19 30 3 00 19 30 6 00 19 30 66 00 19 30 7 00 19 30 VIT 00 19 30 VIT 1 00 19 30 VIT 2 00 19 31 00 19 32 00 19 33 00 19 33 2 00 19 34 00 19 34 1 00 19 34 2 00 19 34 3 00 19 34 4 00 19 35 1 00 19 35 2 00 19 35 3 00 19 36 00 19 39 00 19 41 00 19 48 00 19 56 00 19 57 00 20 03 SB 00 20 10 00 20 11 00 20 12 00 20 13 00 20 15 00 20 16 00 20 17 00 20 18 00 20 18 ESD 00 21 01 TL 00 21 02 SL 00 21 15 00 21 15 LE 00 21 20 00 21 20 LE 00 21 30 01 06 160 01 06 190 02 01 180 02 01 200 02 01 225 02 02 180 02 02 200 02 02 225 02 05 180 02 05 200 02 05 225 02 06 180 02 06 200 02 06 225 02 07 200 02 07 225 03 00 180 03 00 200 03 00 250 03 01 140 03 01 160

156

Page

Article-No.

139 139 139 139 140 140 140 140 140 140 140 141 141 142 142 144 145 144 145 144 144 145 145 145 146 147 146 146 147 147 147 143 143 146 146 146 146 146 148 148 148 148 149 149 149 149 149 151 150 150 150 150 152 153 151 151 154 154 155 13 13 14 14 14 14 14 14 14 14 14 14 14 14 14 14 15 15 15 15 15

03 01 180 03 01 200 03 01 250 03 02 160 03 02 180 03 02 200 03 05 140 03 05 160 03 05 180 03 05 200 03 06 160 03 06 180 03 06 200 03 07 160 03 07 180 03 07 200 03 07 250 08 05 110 08 15 110 11 01 160 11 02 160 11 05 160 11 06 160 11 07 160 11 12 160 11 15 160 11 17 160 11 92 140 12 11 180 12 12 02 12 12 06 12 12 10 12 19 02 12 19 06 12 19 10 12 19 180 12 21 180 12 29 180 12 40 200 12 42 195 12 62 180 12 49 01 12 49 02 12 49 03 12 49 21 12 49 22 12 49 23 12 69 21 12 50 200 12 59 01 12 59 02 12 60 135 12 69 135 12 80 100 SB 12 82 130 SB 12 85 100 SB 13 01 160 13 01 6 14 13 02 160 13 72 160 SB 14 22 160 14 26 160 15 11 120 15 19 005 15 19 006 15 19 008 15 19 010 15 51 160 15 61 160 15 81 160 16 20 16 SB 16 20 165 SB 16 20 28 SB 16 29 165 16 30 135 SB 16 39 135 16 40 150 16 49 150 16 60 05 SB 16 60 100 SB

Page 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 13 13 17 17 17 17 17 17 17 17 18 18 19 19 19 19 19 19 18 18 18 20 21 21 20 20 20 21 21 21 21 20 20 20 20 20 22 22 22 23 23 23 23 24 24 24 24 24 24 24 24 24 24 25 25 25 25 25 25 26 26 26 27

Article-No. 16 65 125 SB 16 80 125 SB 16 85 125 SB 19 01 130 19 03 130 20 01 125 20 01 140 20 01 160 20 01 180 20 01 200 20 02 140 20 02 160 20 05 140 20 05 160 20 06 160 20 07 160 22 01 125 22 01 140 22 01 160 22 01 180 22 02 140 22 02 160 22 05 125 22 05 140 22 05 160 22 06 160 22 07 160 23 01 140 25 01 125 25 01 140 25 01 160 25 02 140 25 02 160 25 03 125 25 03 140 25 03 160 25 05 140 25 05 160 25 06 160 25 21 160 25 25 160 25 26 160 26 11 200 26 12 200 26 13 200 26 15 200 26 16 200 26 17 200 26 21 200 26 22 200 26 23 200 26 25 200 26 26 200 26 27 200 27 01 160 28 01 200 28 03 200 28 21 200 29 11 160 29 21 160 29 25 160 30 11 140 30 11 160 30 11 190 30 13 140 30 13 160 30 15 140 30 15 160 30 15 190 30 16 160 30 21 140 30 21 160 30 21 190 30 23 140 30 25 140 30 25 160 30 25 190 30 31 140 30 31 160 30 33 140

Page 27 27 27 31 31 29 29 29 29 29 29 29 29 29 29 29 30 30 30 30 30 30 30 30 30 30 30 31 32 32 32 32 32 32 32 32 32 32 32 32 32 32 33 33 33 33 33 33 33 33 33 33 33 33 34 34 34 34 35 35 35 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36

Article-No. 30 33 160 30 35 140 30 35 160 30 36 160 31 11 160 31 15 160 31 21 160 31 25 160 32 11 135 32 13 135 32 21 135 32 23 135 32 31 135 33 01 160 33 03 160 35 11 115 35 12 115 35 12 115 ESD 35 21 115 35 22 115 35 22 115 ESD 35 31 115 35 32 115 35 32 115 ESD 35 42 115 35 42 115 ESD 35 52 145 35 62 145 35 72 145 35 82 145 36 12 130 36 22 125 36 32 125 36 42 125 SB 37 11 125 37 13 125 37 21 125 37 23 125 37 31 125 37 33 125 37 41 125 37 43 125 38 11 200 38 13 200 38 15 200 38 21 200 38 25 200 38 31 200 38 35 200 38 41 190 38 45 190 38 61 190 38 71 200 38 91 200 38 95 200 40 04 180 40 04 250 41 04 180 41 04 250 41 04 300 41 14 250 41 24 225 41 34 165 42 14 280 42 24 280 42 34 280 44 10 J5 44 10 J6 44 11 J0 44 11 J1 44 11 J2 44 11 J3 44 11 J4 44 13 J0 44 13 J1 44 13 J2 44 13 J3 44 13 J4 44 19 J5 44 19 J6

Page 36 36 36 36 35 35 35 35 37 37 37 37 37 37 37 38 38 39 38 38 39 38 38 39 38 39 38 38 38 38 41 41 41 41 42 42 42 42 42 42 42 42 43 43 43 43 43 43 43 43 43 43 43 43 43 44 44 44 44 44 44 44 44 45 45 45 48 48 48 48 48 48 48 48 48 48 48 48 48 48

Article-No. 44 20 J51 44 20 J61 44 21 J01 44 21 J11 44 21 J21 44 21 J31 44 21 J41 44 23 J01 44 23 J11 44 23 J21 44 23 J31 44 23 J41 44 29 J51 44 29 J61 45 10 170 45 21 200 46 10 A5 46 10 A6 46 11 A0 46 11 A1 46 11 A2 46 11 A3 46 11 A4 46 11 G0 46 11 G1 46 11 G2 46 11 G3 46 11 G4 46 13 A0 46 13 A1 46 13 A2 46 13 A3 46 13 A4 46 19 A5 46 19 A6 46 20 A51 46 20 A61 46 21 A01 46 21 A11 46 21 A21 46 21 A31 46 21 A41 46 23 A01 46 23 A11 46 23 A21 46 23 A31 46 23 A41 46 29 A51 46 29 A61 48 11 J0 48 11 J1 48 11 J2 48 11 J3 48 11 J4 48 21 J01 48 21 J11 48 21 J21 48 21 J31 48 21 J41 49 11 A0 49 11 A1 49 11 A2 49 11 A3 49 11 A4 49 21 A01 49 21 A11 49 21 A21 49 21 A31 49 21 A41 50 00 130 50 00 160 50 00 180 50 00 210 50 00 225 50 00 250 50 00 300 50 01 130 50 01 160 50 01 180 50 01 210

Page 48 48 48 48 48 48 48 48 48 48 48 48 48 48 47 47 49 49 49 49 49 49 49 47 47 47 47 47 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 50 50 50 50 50 50 50 50 50 50 51 51 51 51 51 51 51 51 51 51 52 52 52 52 52 52 52 52 52 52 52

Article-No. 50 01 225 50 01 250 50 01 300 51 01 210 55 00 300 56 00 325 57 00 360 58 10 225 58 30 225 61 01 200 62 12 120 64 01 115 64 02 115 64 11 115 64 12 115 64 12 115 ESD 64 22 115 64 32 120 64 32 120 ESD 64 42 115 64 52 115 64 62 120 64 62 120 ESD 64 72 120 67 01 140 67 01 160 67 01 200 67 05 140 67 05 160 67 05 200 68 01 160 68 01 180 68 01 200 69 01 130 69 03 130 69 05 130 70 01 110 70 01 125 70 01 140 70 01 160 70 01 180 70 02 125 70 02 140 70 02 160 70 02 180 70 04 140 70 05 125 70 05 140 70 05 160 70 05 180 70 06 125 70 06 140 70 06 160 70 06 180 70 07 160 70 07 180 70 11 110 70 15 110 70 26 160 71 01 200 71 02 200 71 11 200 71 31 200 72 01 140 72 01 160 72 01 180 72 02 125 72 11 160 72 21 160 72 51 160 74 01 140 74 01 160 74 01 180 74 01 200 74 01 250 74 02 140 74 02 160 74 02 180 74 02 200 74 02 250

Page 52 52 52 52 53 53 53 53 53 57 57 58 58 58 58 59 58 58 59 58 58 58 59 58 59 59 59 59 59 59 60 60 60 60 60 60 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 62 62 62 62 63 63 63 63 63 63 62 64 64 64 64 64 64 64 64 64 64

Article-No. 74 04 160 74 04 180 74 04 250 74 05 140 74 05 160 74 05 180 74 05 200 74 05 250 74 06 160 74 06 180 74 06 200 74 06 250 74 07 200 74 07 250 74 12 180 74 21 160 74 21 200 74 22 200 74 91 250 75 02 125 75 12 125 75 22 125 75 32 125 75 52 125 76 01 125 76 03 125 76 05 125 76 12 125 76 22 125 76 81 125 77 01 115 77 01 130 77 02 115 77 02 115 ESD 77 02 130 77 11 115 77 12 115 77 12 115 ESD 77 21 115 77 21 130 77 22 115 77 22 115 ESD 77 22 130 77 22 130 ESD 77 32 115 77 32 115 ESD 77 42 115 77 42 115 ESD 77 42 130 77 52 115 77 52 115 ESD 77 72 115 77 72 115 ESD 78 03 125 78 03 125 ESD 78 13 125 78 13 125 ESD 78 23 125 78 31 125 78 41 125 78 61 125 78 61 125 ESD 78 71 125 78 71 125 ESD 81 03 230 81 13 230 81 19 230 82 51 200 83 10 010 83 10 015 83 10 020 83 10 030 83 10 040 83 20 010 83 20 015 83 20 020 83 30 005 83 30 010 83 30 015 83 30 020

Page 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 63 65 65 65 65 65 65 65 65 65 65 65 66 66 66 67 66 66 66 67 66 66 66 67 66 67 66 67 66 67 66 66 67 66 67 68 69 68 69 68 68 68 68 69 68 69 71 71 71 71 72 72 72 72 72 72 72 72 72 72 72 72


Article-No. 83 30 030 84 11 200 84 21 200 86 03 180 86 03 250 86 03 300 86 05 180 86 05 250 87 01 150 87 01 180 87 01 250 87 01 300 87 01 400 87 01 560 87 02 180 87 02 250 87 02 300 87 03 180 87 03 250 87 03 300 87 05 250 87 05 300 87 11 180 87 11 250 87 19 250 87 19 300 87 41 250 88 00 250 88 01 180 88 01 250 88 01 300 88 02 180 88 02 250 88 02 300 88 03 180 88 03 250 88 03 300 88 05 180 88 05 250 88 05 300 88 06 250 88 07 250 88 07 300 89 01 200 89 01 250 89 03 200 89 03 250 89 04 250 89 05 200 89 05 250 90 01 125 90 03 125 90 25 20 90 29 01 90 29 02 90 29 15 90 25 40 90 29 40 90 41 340 90 42 250 90 49 340 90 49 340 M 90 55 280 90 59 280 90 63 16 90 63 20 90 70 220 91 00 200 91 11 190 91 30 180 91 51 160 91 61 160 91 71 160 92 02 53 92 02 54 92 02 55 92 08 78 ESD 92 08 79 ESD 92 12 52 92 22 04

Page 72 71 71 74 74 74 74 74 75 75 75 75 73 73 75 75 75 75 75 75 75 75 76 76 76 76 76 77 77 77 77 77 77 77 77 77 77 77 77 77 77 77 77 78 78 78 78 78 78 78 78 78 79 79 79 79 79 79 80 80 80 80 80 80 81 81 81 82 82 82 83 83 83 85 85 85 86 86 85 84

Article-No. 92 22 06 92 22 07 92 22 12 92 22 13 92 22 35 92 23 05 92 24 01 92 24 34 92 27 61 92 27 62 92 28 69 ESD 92 28 70 ESD 92 28 71 ESD 92 28 72 ESD 92 32 29 92 34 28 92 34 36 92 34 37 92 37 64 92 38 75 ESD 92 44 42 92 52 23 92 58 74 ESD 92 64 43 92 64 44 92 67 63 92 69 84 92 70 46 92 72 45 92 78 77 ESD 92 84 18 92 88 73 ESD 92 94 91 92 95 89 92 95 90 94 10 185 94 19 185 94 15 215 94 19 215 94 35 215 94 19 215 95 02 10 95 02 21 95 03 160 SB 95 05 140 95 05 165 95 05 185 95 05 190 95 06 230 95 11 165 95 11 200 95 11 500 95 12 165 95 12 200 95 16 165 95 16 200 95 17 200 95 17 500 95 21 600 95 27 600 95 29 600 95 31 250 95 31 280 95 31 720 95 31 870 95 36 250 95 36 280 95 39 250 95 39 280 95 39 720 95 39 870 95 61 190 95 71 445 95 71 600 95 77 600 95 79 445 95 79 600 95 81 600 95 89 600 97 00 215 A

Page

Article-No.

Page

Article-No.

Page

Article-No.

Page

Article-No.

Page

84 84 84 84 84 84 84 84 86 86 86 86 86 86 84 84 84 84 86 86 85 85 86 85 85 86 87 85 85 86 85 86 87 87 87 89 89 89 89 90 90 90 90 91 91 92 91 91 92 92 93 94 92 93 92 93 93 94 94 94 94 95 95 96 96 95 95 95 95 96 96 96 97 97 97 97 97 97 97 99

97 00 215 B 97 00 215 D 97 21 215 97 21 215 B 97 21 215 C 97 32 225 97 40 10 97 43 05 97 43 06 97 43 72 97 43 74 97 43 78 97 43 200 97 49 04 97 49 05 97 49 06 97 49 08 97 49 09 97 49 13 97 49 15 97 49 16 97 49 19 97 49 20 97 49 24 97 49 30 97 49 35 97 49 40 97 49 44 97 49 50 97 49 54 97 49 60 97 49 61 97 49 64 97 49 70 97 49 74 97 49 76 97 49 81 97 49 82 97 49 83 97 49 84 97 49 87 97 49 90 97 49 91 97 49 93 97 49 94 97 49 95 97 50 01 97 51 04 97 51 10 97 51 12 97 52 03 97 52 13 97 52 04 97 52 05 97 52 06 97 52 08 97 52 09 97 52 10 97 52 12 97 52 13 97 52 14 97 52 19 97 52 20 97 52 24 97 52 30 97 52 33 97 52 35 97 52 36 97 52 38 97 52 39 97 52 50 97 52 63 97 52 64 97 52 65 97 53 04 97 53 05 97 53 08 97 53 09 97 53 14 97 59 06

99 99 99 99 99 100 100 102 102 101 101 101 100 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 104 104 104 105 106 106 106 106 106 106 106 106 107 106 107 106 107 107 107 107 107 107 107 107 107 105 105 105 108 108 108 108 108 104

97 54 24 97 61 145 A 97 61 145 F 97 62 145 97 71 180 97 72 180 97 81 180 97 90 00 97 90 01 97 90 05 97 90 06 97 90 07 97 90 08 97 90 09 97 90 10 97 90 12 97 99 01 97 99 02 97 99 03 97 99 04 97 99 05 97 99 06 97 99 07 97 99 08 97 99 09 97 99 10 97 99 11 97 99 12 97 99 13 97 99 14 97 99 15 97 99 16 97 99 17 97 99 18 97 99 19 97 99 20 97 99 21 97 99 22 97 99 23 97 99 24 97 99 25 97 99 26 97 99 27 97 99 28 97 99 29 97 99 30 97 99 31 97 99 32 97 99 33 97 99 34 97 99 35 97 99 36 97 99 37 97 99 38 97 99 40 97 99 41 97 99 42 97 99 43 97 99 44 97 99 45 97 99 46 97 99 47 97 99 48 97 99 49 97 99 70 97 99 71 97 99 72 97 99 73 97 99 74 97 99 75 97 99 76 97 99 77 97 99 78 97 99 79 97 99 92 97 99 93 97 99 95 97 99 96 98 00 07 98 00 08

110 110 110 110 110 110 111 111 111 112 112 112 112 112 112 112 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 126 126

98 00 09 98 00 10 98 00 11 98 00 12 98 00 13 98 00 14 98 00 15 98 00 16 98 00 17 98 00 18 98 00 19 98 00 22 98 00 24 98 00 27 98 00 1/4 98 00 5/16 98 00 3/8" 98 00 7/16" 98 00 1/2" 98 00 9/16" 98 00 5/8" 98 00 3/4" 98 01 07 98 01 08 98 01 09 98 01 10 98 01 13 98 01 14 98 01 16 98 01 17 98 01 18 98 01 19 98 01 22 98 01 24 98 03 055 98 03 06 98 03 07 98 03 08 98 03 09 98 03 10 98 03 11 98 03 12 98 03 13 98 04 10 98 04 13 98 04 14 98 04 17 98 04 19 98 05 13 98 05 17 98 05 19 98 13 25 98 13 30 98 13 40

126 126 126 126 126 126 126 126 126 126 126 126 126 126 126 126 126 126 126 126 126 126 126 126 126 126 126 126 126 126 126 126 126 126 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127

98 13 50 98 13 60 98 14 05 98 14 06 98 14 08 98 15 05 98 15 06 98 15 08 98 20 28 98 20 35 98 20 40 98 20 55 98 20 65 98 20 80 98 20 10 98 21 45 98 24 00 98 24 01 98 24 02 98 24 03 98 24 04 98 25 01 98 25 02 98 25 03 98 31 98 35 125 98 35 250 98 37 10 98 37 11 98 37 13 98 37 14 98 37 17 98 37 19 98 37 5/16" 98 37 3/8" 98 37 7/16" 98 37 1/2" 98 37 9/16" 98 37 5/8" 98 37 3/4" 98 39 05 98 39 06 98 40 98 41 98 42 98 43 98 45 125 98 45 250 98 47 10 98 47 11 98 47 12 98 47 13 98 47 14 98 47 16

127 127 127 127 127 127 127 127 128 128 128 128 128 128 128 128 128 128 128 128 128 128 128 128 129 129 129 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 129 129 131 131 129 129 130 130 130 130 130 130

Article-No. 98 47 17 98 47 18 98 47 19 98 47 22 98 47 24 98 47 27 98 47 30 98 47 32 98 47 1/2" 98 47 9/16" 98 47 3/4" 98 47 15/16" 98 49 05 98 49 06 98 49 08 98 52 98 53 03 98 53 13 98 54 98 55 98 56 98 56 09 98 60 04 98 62 200 98 64 02 98 65 01 98 65 02 98 65 03 98 65 10 98 65 20 98 65 30 98 65 40 98 65 41 98 67 05 98 67 10 98 90 98 99 11 98 99 12 98 99 13 98 99 14 99 00 200 99 00 220 99 00 250 99 00 280 99 00 300 99 01 200 99 01 220 99 01 250 99 01 280 99 01 300 99 00 220 K12 99 10 300 99 11 300 99 14 300

Unauthorized use or copying the contents of the catalogue is not permitted. All rights are reserved for alteration of models and technical alterations. Illustrations, dimensions and weights are only approximate. All rights are reserved for mistakes and misprint. Printed in the Federal Republic of Germany KNIPEX-Werk 2005

Page 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 131 132 132 132 132 133 133 133 133 134 134 134 134 134 134 134 134 134 135 135 135 135 136 136 137 55 55 55 55 55 55 55 55 55 55 55 55 55 55


KNIPEX-Werk C. Gustav Putsch KG P. O. Box 12 04 05 D-42334 Wuppertal Oberkamper StraĂ&#x;e 13 D-42349 Wuppertal Phone: +49(0)2 02 / 47 94 -0 Fax: +49(0)2 02 / 47 50 58 Fax Export: +49(0)2 02 / 47 74 94

L100 01518/02/07.05/30.000/GB

Internet: www.knipex.de www.knipex.com E-Mail: info@knipex.de


http://www.expokom.sk/fileadmin/katalogy/KNIPEX-Catalogue_en