|
|
|
roller 64™ dimensions
roller 64 brackets
Universal bracket design One-piece bracket for simple installation - Same bracket for left and right side of roller tube - Same bracket for ceiling, wall, and jamb mount • Roller tube installs with simple, spring-loaded design
System dimensions
•
The roller 64 system utilizes a 1.67 in. (42 mm) roller tube to operate up to 64 sq. ft. (5.95 sq. m) of fabric.*
|
roller 64™ fascia and pockets
roller 64 blackout
Standard end cap Provide a clean look for a system installed without fascia or top box. Available in white.
Blackout configuration Lutron® offers side channels in a width of 2.5 in. or 3.5 in. (64 or 89 mm) to facilitate blackout conditions. K
A
K
Fascia roller 64 can be installed with a top/back cover and fascia for a clean, minimal look. Square and curved fascia and pockets are available in white, black, bronze, and anodized aluminum.
B
Front view
Side view
Square fascia Round fascia top back cover top back cover
M
L
Front view
M
Dimensions
D
3.5 in. (89 mm)
E
1 in. (25 mm)
Top view
Dual-mount roller system Install two fabric panels over the same window with this compact bracket system.
F
M 2.5 in. (64 mm) 3.5 in. (89 mm)
glass Fascia end caps
J G
M
M
D C
I
Dimensions
Lutron-provided pocket dimensions roller 64 will never require more than 3.5 in. height x 3.5 in. depth (89 mm x 89 mm) for installation.
0.75 in. (19 mm) symmetrical, minimum 18.5 in. (470 mm) minimum 3.0 in. (76 mm) maximum 0.26 in. (7 mm) minimum 2.17 in. (55 mm) 1.67 in. (42 mm)
Sill angle
Dimensions 6.0 in. (152 mm)
* Maximum allowable shade size may vary based on fabric selection. Contact customer service or use SCT for actual shade dimensions based on fabric type.
The sill angle completes the blackout by stopping light leaks below the shade.
Sill
K
Side view
7.0 in. (178 mm) 3.9 in. (99 mm)
|
Fabric
glass
6.25 in. (159 mm)
14 Lutron
Optional side channel
K K
1 in. (25 mm)
Mx2 H
Install side channels backto-back at wide center mullions.
ceiling glass
|
Lutron 15