2-Jaw Wedge Type Through-hole Power Chuck (With Adaptor)
Unit:mm
ORDER NO.
Dim Through-Hole (mm) Plunger Stroke (mm) Jaw Stroke (mm) Max. Draw Bar Pull Force (kgf) Max. Gripping Force (kgf) Max. Speed (r.p.m.) Weight (kgs) Matching Cylinder Max. Operating Pressure (kgt/ cm2) Matching Soft Jaw Matching Hard Jaw CODE NO.
NT205 Ø33 10 5.4 1189 2447 7000 5.9 M1036
NT206 Ø45 12 5.5 1479 3875 6000 13 M1246
NT208 Ø52 16 7.4 2294 5710 4800 22.1 M1552
NT210 Ø75 19 8.8 2906 7546 4200 33.2 M1875
NT212 Ø91 23 10.6 3739 9789 3300 61.9 M2091
NT215 Ø117.5 23 10.6 4793 12236 2500 115 M2511
19.5
18.9
17.3
18.4
18.4
15.3
VHC05 HJ05 5002-250
VHC06 HJ06 5002-251
VHC08 HJ08 5002-252
VHC10 HJ10 5002-253
VHC12 HJ12 5002-254
VHC15 HJ15 5002-255
NT205 135 60 110 20 82.55 4 23 10 33 3-M10 2 45 26.5 23.8 19.75 7.75 1 -9 12 15.5 M40x1.5 14
NT206 169 81 140 19 104.78 5 32 12 45 6-M10 2 60 32 29.25 22.75 9.25 11 -1 20 16 M55x2 20
NT208 210 91 170 20.5 133.35 5 37 14 52 6-M12 2 66 38.7 35 29.75 14.75 14.5 -1.5 30 20 M60x2 25
NT210 254 100 220 25 171.45 5 42 16 75 6-M16 2 94 51 46.6 33.75 14.25 8.5 -10.5 45 22 M85x2 30
NT212 304 110 220 28 171.45 6 52 21 91 6-M16 2 108 61.3 56 45.75 15.75 8 -15 50 23 M100x2 30
NT215 381 133 300 43 235 6 62 24 117.5 6-M20 5 139 82 76.7 46.75 13.75 7 -16 60 30 M130x2 43
DIMENSIONS Dim A B C (H6) D E M G H J K L F N max. N min. O max. O min. P max. P min. S T U max. W
Unit:mm
ORDER NO.
LATHE MACHINE ACCESSORIES
E24
POWER CHUCK
All sliding surfaces are hardened and ground for accurate actual running and long service repeatability. Lubrication nipple in each base jaw. Base jaw: 1.5mmx60º serrtion. Mounting: $GDSWRU PRXQWLQJ WR ¿W ZLWK ',1 ,62 %6 $6$ % W\SH $ VSLQGOHV