FLYWHEEL
Disassembly sequence 1 Plate <Manual transmission> Wear plate <Automatic transmission> 2 Bearing <Manual transmission> Drive plate <Automatic transmission>
3 Mitsubishi 4M50 Flywheel Ring gear 4 Flywheel assembly
*a::
Crankshaft Locating pin
Assembly sequence Follow the disassembly sequence in reverse.
Service standards (Unit: mm {in.}) Location
4
Maintenance item Flywheel assembly <Manual transmission>
Standard value
Limit
Friction surface runout (when fitted)
–
0.2 {0.0079}
Friction surface height
19.5 {0.77}
18.5 {0.73}
0.05 {0.0020} or less
0.2 {0.0079}
Friction surface distortion
Remedy
Rectify or replace
Tightening torque (Unit: N·m {lbf·ft, kgf·m}) Mark
Parts to be tightened
Tightening torque
Remarks
Bolt (flywheel assembly installation)
39 {44, 6.0} + 40°
Wet
Bolt (flywheel assembly installation)
118 {87, 12} + 90°
Wet
Lubricant and/or sealant Mark
Points of application Bolt threads
11-62
Specified lubricant and/or sealant
Quantity
Engine oil
As required