13E No.
Item
Explanation
Confirmation method
Increase in idling speed Idle up control reproduced by means of dummy signal (air conditioner operation). (Can be executed with vehicle speed [Service data] 7C: Air conditioner SW 1 of zero and with transmission in neutral.)
B6 Air Conditioner SW 1
Idle up cancel condition reproduced by means of dummy sig- Idling speed low idle nal (idle up cancel). (Can be executed with vehicle speed of [Service data] zero and with transmission in neutral.) 7B: Idle Up Cancel SW
B8 Idle Up Cancel SW
B9 Fuel Leak Check
Rail pressure increased on constant slope (Can be executed Check that no fuel leaks with vehicle speed of zero and transmission in neutral and di- from fuel system. agnosis switch open.)
BB Injector Test 1
Injector magnetic valve (No. 1 cylinder) not activated (Can be Engine RPM should executed with engine speed not exceeding 1,500 rpm and no decrease errors and transmission in neutral and vehicle speed of zero.)
BC Injector Test 2
Injector magnetic valve (No. 2 cylinder) not activated (Can be Engine RPM should executed with engine speed not exceeding 1,500 rpm and no decrease errors and transmission in neutral and vehicle speed of zero.)
BD Injector Test 3
Injector magnetic valve (No. 3 cylinder) not activated (Can be Engine RPM should executed with engine speed not exceeding 1,500 rpm and no decrease errors and transmission in neutral and vehicle speed of zero.)
BE Injector Test 4
Injector magnetic valve (No. 4 cylinder) not activated (Can be Engine RPM should executed with engine speed not exceeding 1,500 rpm and no decrease errors and transmission in neutral and vehicle speed of zero.)
13E-39