Cylinder Block, Liners, Pistons and Rods
Remove Pistons and Connecting Rods
10 3
1. Remove cylinder head, oil pan and oil pump.
–UN–16JUN98
2. Install large flat washers (A) with 1/2-13 UNC cap screws (B) to hold cylinder liners down.
CD30552
3. Decarbonize cylinder liners.
–UN–04MAY98 CD30554
CD30553
–UN–19MAY98
CD,CTM125,048 –19–01DEC97–1/3
4. Mark rods, pistons and caps to insure correct assembly in same location.
6. Remove connecting rod and piston assembly through the cylinder liner.
5. Remove rod cap screws and caps (A).
CD,CTM125,048 –19–01DEC97–2/3
7. Remove and discard piston pin snap rings.
RG7464
–UN–23NOV97
8. Press piston pin out of bore and separate piston and rod.
CD,CTM125,048 –19–01DEC97–3/3
CTM125 (22MAR06)
10-3
POWERTECH 2.9 L Diesel Engines 032306
PN=75