Quattrobi 2012 part 2 by e27.com.ua

MACROQUADRO

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

Light sources Macroquadro uses one to four very low voltage halogen lamps (100 W max G53), depending on the types of luminaires. VERY LOW VOLTAGE HALOGEN LAMPS 12V HMG (HALOSPOT111) - G53

max 100W

Structural features Installation: recessed Luminaire housing: steel sheet Louver: sand-blasted tempered glass Light sources: very low voltage halogen lamps Finishing: white, grey Protection class: IP 40 Insulation class: Accessories: electronic transformers, louvers Power supply: 12V very low voltage

Macroquadro simplifies lamp replacement and maintenance operations thanks to the special hook system with supporting springs which can be detached without using any tools.

This connection accessory allows to use CDM-R111 discharge lamps.

333

Recessed luminaire adjustable on one axis for very low voltage halogen lamps (12V). Power supply: separate power supply: 12V. Ballast not included.

HMG (HALOSPOT111) 100W max - 12V - G53 Colour: 01 - 18 IP 40 Kg 1.00

Size (mm) 60°

108

1331

DESCRIPTION

163

CODE

163 F

152

g 152

30°

112

HMG (HALOSPOT111) 100W max - 12V - G53 Colour: 01 - 18 IP 40 Kg 0.9

163

1330

217 F

152

g 203

60°

108

HMG (HALOSPOT111) 2 x 100W max - 12V - G53 Colour: 01 - 18 IP 40 Kg 1.80

163

1332

300 F

152

g 286

60°

108

HMG (HALOSPOT111) 3 x 100W max - 12V - G53 Colour: 01 - 18 IP 40 Kg 2.20

163

1333

437 F

152

g 423

60°

108

HMG (HALOSPOT111) 4 x 100W max - 12V - G53 Colour: 01 - 18 IP 40 Kg 2.60

163

1334

574 F

152

g 560

01 white 18 grey NOTE

334

Recessed luminaire adjustable on one axis for very low voltage halogen lamps (12V). Power supply: separate power supply: 12V. Ballast not included.

MACROQUADRO

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

HMG (HALOSPOT111) 4 x 100W max - 12V - G53 Colour: 01 - 18 IP 40 Kg 2.50

Size (mm) 60째

60째

108

1335

DESCRIPTION

300

CODE

300

284 284

70W Electronic transformer A=110 - B=50 - C=35

417

105W Electronic transformer A=110 - B=50 - C=35

418

200W Electronic transformer A=225 - B=55 - C=45

660

Satin glass louver For code 1331

661

Satin glass louver For code 1332

662

Satin glass louver For code 1333

663

Satin glass louver For code 1334

664

Satin glass louver For code 1335

799

Lamp frame for installation of CDM-R111 discharge lamps

416

Size (mm)

ACCESSORIES

01 white 18 grey NOTE

335

MICROQUADRO

These medium-sized recessed luminaires â&#x20AC;&#x201C; half-way between Macroquadro and the Minimicro â&#x20AC;&#x201C; are the ideal solution for installation in small spaces and low false-ceilings requiring a discreet and efficient design.

Highest lighting performance also in small spaces and where very small-sized spotlights are requested. Microquadro meets all discretion and functional needs. It uses very low voltage halogen lamps mounted into a structure that ensure adjustability up to 30Â° vertically, depending on the luminaire models. Microquadro provides one to three optical assemblies, recessed from the luminaire outer profile to eliminate annoying glare. Two finishing colours are available: white or grey.

Structural features Installation: recessed Luminaire housing: steel sheet Light sources: very low voltage halogen lamps (12V) Standard finishing: white, grey Accessories: sand-blasted tempered glass louver, recessed frame, kit for mains voltage lamps Protection class: IP43 Insulation class: Power supply: 12V very low voltage

336

MICROQUADRO

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

Technical specifications The Microquadro mainframe is completely made of UVstabilised epoxy polyester steel sheet. Quick-hook springs allow to mount the light sources quickly and easily, whether they are very low voltage halogen lamps or mains voltage lamps. Using the latter requires a special accessory. Microquadro accessories include the electric transformer and sand-blasted tempered glass front louver and galvanised sheet recessed frame for code 1310 and 1312 (square model and type with fixed optical component respectively). The recessed frame is a metal box, purposely created for ceiling mounting, which is placed in the base concrete casting and builds the luminaire housing.

Light sources This recessed luminaire uses one to three very low voltage halogen lamps - 50 W max GU5.3 - depending on the types. VERY LOW VOLTAGE HALOGEN LAMPS 12V HRGI - 12V - GU5.3

max 50W

Recessed box for installation of luminaires into concrete ceilings and walls.

With up to three optical assemblies, small dimensions and low depth (from 90 to 110 mm), Microquadro can be installed and adjusted easily and provide high visual comfort.

Flush mounting of Microquadro luminaires.

2 1

337

Adjustable or fixed recessed luminaire for very low voltage halogen lamps (12V). Separate power supply: 12V. Ballast not included.

1310

DESCRIPTION HRGI - 50W max - 12V - GU5.3 Colour: 01 - 18 IP 43 Kg 0.19

Size (mm) 15° 15°

CODE

83 F

75 75

HRGI - 50W max - 12V - GU5.3 Colour: 01 - 18 IP 43 Kg 0.29

30°

1311

128 x 83 F

115

1312

HRGI - 2 x 50W max - 12V - GU5.3 Colour: 01 - 18 IP 43 Kg 0.32

110

143 x 83 F

130 75

HRGI - 2 x 50W max - 12V - GU5.3 Colour: 01 - 18 IP 43 Kg 0.32

30°

110

1313

154 x 83 F

151 75

HRGI - 2 x 50W max - 12V - GU5.3 Colour: 01 - 18 IP 43 Kg 0.35

30°

15° 15°

110

1314

164 x 83 F

151 75

01 white 18 grey NOTE

338

Adjustable or fixed recessed luminaire for very low voltage halogen lamps (12V). Separate power supply: 12V. Ballast not included.

MICROQUADRO

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

1315

DESCRIPTION HRGI - 3 x 50W max - 12V - GU5.3 Colour: 01 - 18 IP 43 Kg 0.49

Size (mm) 15째 15째

30째

110

CODE

245 x 83 F

232 75

417

105W Electronic transformer A=110 - B=50 - C=35

418

200W Electronic transformer A=225 - B=55 - C=45

850

Recessed frame For code 1310 A=212 - B=100 - C=115 - D=74

851

Recessed frame For code 1311 A=154 - B=110 - C=125 - D=210

852

Recessed frame For code 1312 A=170 - B=110 - C=125 - D=210

853

Recessed frame For code 1313 A=180 - B=110 - C=125 - D=210

794

Connection kit HMG - 50W max - GZ10 250V max

70W Electronic transformer A=110 - B=50 - C=35

B C

416

Size (mm)

ACCESSORIES

Using the kit 794, the product becomes a class II luminaire

793

Connection kit MR -35W - GX10

01 white 18 grey NOTE

339

Adjustable or fixed recessed luminaire for very low voltage halogen lamps (12V). Without outer profile. Separate power supply: 12V. Ballast not included.

MICROQUADRO

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

1310 R

DESCRIPTION

Size (mm)

HRGI - 50W max - 12V - GU5.3 Colour: 01 IP 43 Kg 0.19

115

CODE

80 F

82 82

HRGI - 50W max - 12V - GU5.3 Colour: 01 IP 43 Kg 0.32

115

1311 R

80 F

117 120

HRGI - 2 x 50W max - 12V - GU5.3 Colour: 01 IP 43 Kg 0.32

115

1312 R

80 F

150

152 82

416

70W Electronic transformer A=110 - B=50 - C=35

417

105W Electronic transformer A=110 - B=50 - C=35

794

Connection kit HMG - 50W max - GZ10 250V max

Size (mm)

ACCESSORIES

Using the kit 794, the product becomes a class II luminaire

793

Connection kit MR -35W - GX10

01 white NOTE

340

MINIMICRO

As a small recessed luminaire for very low voltage halogen lamps, Minimicro is the perfect solution for all installations requiring small dimensions and excellent lighting comfort.

The Minimicro line is the ideal completion to the Quattrobi recessed luminaire offering, with even smaller systems – recessed depth is only 60 mm – able to meet all applications, including existing ones, and maintain the visual and aesthetic appearance of the environment. Despite its very small size, performance is excellent: its essential line is combined with the greatest lighting comfort, because the optical assemblies are in a rear position compared to false-ceiling surface and standard flush-mounted systems in the lamp housing, thus providing an excellent shielding of optical components.

Technical specifications These small recessed luminaires are totally made of UVstabilised epoxy-polyester steel sheet. They come in three types: - square, with outer frame of 66 x 66 mm and one lamp; - rectangular, with outer frame of 66 x 92 mm and one 30°-inclined lamp; - rectangular, with outer frame of 66 x 116 mm and two lamps.

Optical components and light sources Minimicro accommodates single or multiple optical assemblies, set in a way to guarantee high shielding of the optical components. The light sources are very low voltage halogen lamps, 20 or 35 W, with GU4 fitting. VERY LOW VOLTAGE HALOGEN LAMPS 12V HRGI - 12V - GU4 - Ø 35 mm HRGI - 12V - GU4 - Ø 35 mm

20W 35W

Structural features Installation: recessed Luminaire housing: coated steel sheet Light sources: very low voltage halogen lamps (12V) Standard finishing: white, grey Protection class: IP43 Insulation class: III Power supply: 12V very low voltage

342

Fixed recessed luminaire for very low voltage halogen lamps (12V). Separate power supply: 12V. Ballast not included.

MINIMICRO

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

Size (mm)

HRGI - 35W max - 12V - GU4 Colour: 01 - 18 IP 43

1300

DESCRIPTION

CODE

63 63

HRGI - 35W max - 12V - GU4 Colour: 01 - 18 IP 43

1301

63 77

HRGI - 2 x 35W max - 12V - GU4 Colour: 01 - 18 IP 43

1302

63 100 116

ACCESSORIES Recessed frame For code 1300 A=212 - B=84 - C=99 - D=65

B C

854

01 white 18 grey NOTE

343

DOWNSPOT

Small-sized fixed and adjustable recessed luminaires combine the latest technology with a focus on details, i.e. special finishing and colours, to provide decorative solutions which play the main role in space setting.

346

Downspot decorative recessed luminaires are designed for use of mains voltage and very low voltage (12V) halogen lamps. This wide and complete range includes fixed and adjustable luminaires (with 30째 and 45째 orientation), which are extremely functional and easy to install, suitable for diffuse and accent lighting. The various types include: round-shaped luminaires with different diameters (63 to 129 mm, based on the models) or square luminaires with different dimensions. Some types feature adjustable semi-recessed spotlights, while others can be equipped with satin and coloured (white, pink, green, blue, amber, light blue) diffusers with a highly decorative impact. A large number of finishing is available in white, black, golden, chrome and grey.

DOWNSPOT

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

Technical specifications Downspot recessed luminaires can be in die-cast aluminium, epoxy polyester aluminium, coated pressed steel, glass and thermoplastic materials, depending on the versions. Light sources include (Class I) mains voltage and (Class III) very low voltage halogen lamps. Electromechanical and electronic toroidal transformers are optional.

Structural features Installation: recessed Luminaire housing: coated die-cast aluminium, coated aluminium, glass and thermoplastic material Light sources: mains voltage and very low voltage (12V) halogen lamps Finishing: white, black, golden, chrome, grey Protection class: IP43 Insulation class: I Power supply: 250V max, 12V

Light sources This luminaire family uses mains voltage halogen lamps (40 W E14, 50 W GZ10, 60 W E27, 75 W GZ10) or very low voltage halogen lamps (35 W 12V GU4, 50 W 12V GU5.3).

347

Die-cast aluminium recessed spotlights for mains voltage halogen lamps.

DOWNSPOT

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

1000

DESCRIPTION Fixed IRR - R50 - 40W max - E14 250V max Colour: 01 - 02 - 11 - 14 Kg 0.12

Size (mm)

105

CODE

Ø97

1001

Fixed HSGI - 50W max - GZ10 250V max Colour: 01 - 02 - 11 - 14 Kg 0.15

Ø70

105

Ø97

1010

Fixed IRR - R63 - 60W max - E27 250V max Colour: 01 - 02 - 11 - 14 Kg 0.15

Ø70

120

Ø105

1011

Fixed HSGI - 75W max - GZ10 250V max Colour: 01 - 02 - 11 - 14 Kg 0.19

Ø85

120

Ø105 F

Ø85

01 white 02 black 11 golden 14 chrome NOTE

348

Die-cast aluminium recessed spotlights for very low voltage halogen lamps.

1020

DESCRIPTION Adjustable - 30° vertically HRGI - 50W max - 12V - GU5.3 Colour: 01 - 02 IP 43 Kg 0.16 F

Size (mm) 30°

CODE

g Ø129

GZ10 connection lamp kit GY6.35 connection lamp kit

1030

Adjustable - 30° vertically HRGI - 50W max - 12V - GU5.3 Colour: 01 - 02 IP 43 Kg 0.27

794 795

GZ10 connection lamp kit GY6.35 connection lamp kit

1035

Adjustable - 30° vertically HRGI - 50W max - 12V - GU5.3 Colour: 01 - 02 IP 43 Kg 0.20 F

30°

Ø128 Ø115

15°

105

Ø115

794 795

g Ø128

794 795

GZ10 connection lamp kit GY6.35 connection lamp kit

Ø115

01 white 02 black NOTE

350

Die-cast aluminium recessed spotlights for very low voltage halogen lamps.

DOWNSPOT

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

1060

DESCRIPTION Adjustable - 30° vertically HRGI - 50W max - 12V - GU5.3 Colour: 01 - 02 - 11 - 14 - 18 IP 43 Kg 0.16 F

Size (mm) 30°

CODE

g 96

GZ10 connection lamp kit GY6.35 connection lamp kit

1070

Fixed HRGI - 50W max - 12V - GU5.3 Colour: 01 - 02 - 11 - 14 IP 43 Kg 0.11

GZ10 connection lamp kit GY6.35 connection lamp kit

1080

Fixed HRGI - 50W max - 12V - GU5.3 Colour: 01 - 02 - 11 - 14 - 18 IP 43 Kg 0.10

794 795

GZ10 connection lamp kit GY6.35 connection lamp kit

1090

Adjustable - 30° vertically HRGI - 50W max - 12V - GU5.3 Colour: 01 - 02 - 11 - 14 - 18 IP 43 Kg 0.14 F

Ø72 30°

794 795

GZ10 connection lamp kit GY6.35 connection lamp kit

1050

Adjustable - 45° vertically HRGI - 50W max - 12V - GU5.3 Colour: 01 - 02 - 11 - 14 IP 43 Kg 0.17 F

Ø82

Ø72

794 795

Ø95 Ø80

794 795

g Ø106

794 795

GZ10 connection lamp kit GY6.35 connection lamp kit

Ø95

01 white 02 black 11 golden 14 chrome 18 grey NOTE

351

Die-cast aluminium recessed spotlights for very low voltage halogen lamps.

1125

DESCRIPTION Fixed HRGI - 35W max - 12V - GU4 Colour: 01 - 02 - 11 - 14 - 18 IP 43 Kg 0.15

Size (mm)

CODE

Ø56

1120

GZ10 connection lamp kit GY6.35 connection lamp kit

1130

Adjustable - 45° vertically HRGI - 50W max - 12V - GU5.3 Colour: 01 - 02 - 11 - 14 - 18 IP 43 Kg 0.18

794 795

Ø60

794 795

Ø66

Fixed HRGI - 50W max - 12V - GU5.3 Colour: 01 - 02 - 11 - 14 - 18 IP 43 Kg 0.16 F

45°

Adjustable - 45° vertically HRGI - 35W max - 12V - GU4 Colour: 01 - 02 - 11 - 14 - 18 IP 43 Kg 0.16

Ø50

1135

Ø78 Ø67 45°

GZ10 connection lamp kit GY6.35 connection lamp kit

Ø83 Ø80

01 white 02 black 11 golden 14 chrome 18 grey NOTE

352

Recessed spotlights in die-cast aluminium, thermoplastic material and pressed steel for very low voltage halogen lamps.

DOWNSPOT

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

1140

DESCRIPTION Fixed HSG - 10W max - 12V - G4 Colour: 01 - 02 - 11 - 14 IP 43 Kg 0.01

Size (mm)

CODE

g Ø25

1160

Fixed - Thermoplastic material HSG - 20W max - 12V - G4 Colour: 01 - 02 - 11 - 14 IP 43 Kg 0.16

Adjustable 90° vertically HSG - 20W max - 12V - G4 Colour: 01 - 02 - 11 - 14 IP 43 Kg 0.17

Ø52

Ø42

1150

Ø35

Ø67 Ø56

01 white 02 black 11 golden 14 chrome NOTE

353

Satin glass recessed spotlights for very low voltage halogen lamps.

1180

DESCRIPTION Fixed HSG - 20W max - 12V - G4 Colour: AZ, BI, RO, VE, BL IP 43 Kg 0.50

Size (mm)

CODE

Ø64

Fixed HRGI - 50W max - 12V - GU5.3 Colour: AM, BI, BL IP 43 Kg 0.60 F

794

GZ10 connection lamp kit

1220

Fixed HSG - 50W max - 12V - GY6.35 Colour: AM, AZ, BI, RO, VE IP 43 Kg 0.14

Ø112 Ø78

1190

Ø48

34 Ø80

g Ø63

AM amber AZ light blue BI white BL blue RO pink VE green NOTE

354

Complementary accessories: drilling kit, ballasts and transformers.

DOWNSPOT

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

Power supply 70W Electronic transformer A=110 - B=50 - C=35

417

105W Electronic transformer A=110 - B=50 - C=35

418

200W Electronic transformer A=225 - B=55 - C=45

990

416

Size (mm)

DESCRIPTION

CODE

Drilling kit Circular cutter for recessed spotlights Ø 56 mm to Ø 254 mm drills

355

SPOT TRACK

These small decorative spotlights are suitable for illuminating objects and details in museums and exhibition areas where efficient but discreet solutions are requested.

358

Technical specifications With different lengths, Spot Track spotlights are high-bay systems which can be directly mounted in the ceiling - using a base with jack - or on electrical powered tracks for very low halogen lamps. These luminaires consist of a supporting stem in coated steel, attached to the lighting elements with glass and aluminium diffusers. The system includes an electrical powered track to create different configurations using the various accessories: flexible and linear joints, L joints, ceiling and wall connections, high-bay and base systems, 150 and 250VA electronic transformers. The track is made of extruded aluminium; electrical wires are contained in an extruded PVC sheath situated inside the track. The wire section supports max load of 25A (about 300 W).

SPOT TRACK

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

Light sources Spot Track luminaires use very low voltage halogen lamps (35 W 12V GU4, 50 W 12V GU5.3).

Structural features Installation: electrical powered track, base Luminaire housing: coated steel stem, die-cast aluminium or glass housing Light sources: very low voltage halogen lamps (-12V) Finishing: white, black, grey, chrome Protection class: IP20 Insulation class: Power supply: 12V

359

High-bay luminaire for very low voltage halogen lamps. Jack or electrical powered track installation. Extruded aluminium structure.

CODE 5717

5732

5762

5817

5832

Jack - length 150 mm HRGI - 50W max - 12V - GU5.3 Colour: 01 - 14 - 18 Kg 0.06

Jack - length 300 mm HRGI - 50W max - 12V - GU5.3 Colour: 01 - 14 - 18 Kg 0.10

Jack - length 600 mm HRGI - 50W max - 12V - GU5.3 Colour: 01 - 14 - 18 Kg 0.10

Electrical powered track fitting - length 150 mm HRGI - 50W max - 12V - GU5.3 Colour: 01 - 14 - 18 Kg 0.07

Electrical powered track fitting - length 300 mm HRGI - 50W max - 12V - GU5.3 Colour: 01 - 14 - 18 Kg 0.11

Electrical powered track fitting - length 600 mm HRGI - 50W max - 12V - GU5.3 Colour: 01 - 14 - 18 Kg 0.16

5862

DESCRIPTION

Ă&#x2DC;55

Fitting configuration

Fitting Jack Size (mm)

01 white 14 chrome 18 grey NOTE

360

Fitting On track

High-bay luminaire for very low voltage halogen lamps. Jack or electrical powered track installation. Aluminium structure.

SPOT TRACK

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

5718

5733

5763

5818

5833

5863

DESCRIPTION Jack - length 150 mm HRGI - 35W max - 12V - GU4 Colour: 01 - 14 - 18 Kg 0.06 Jack - length 300 mm HRGI - 35W max - 12V - GU4 Colour: 01 - 14 - 18 Kg 0.10 Jack - length 600 mm HRGI - 35W max - 12V - GU4 Colour: 01 - 14 - 18 Kg 0.15 Electrical powered track fitting - length 150 mm HRGI - 35W max - 12V - GU4 Colour: 01 - 14 - 18 Kg 0.07 Electrical powered track fitting - length 300 mm HRGI - 35W max - 12V - GU4 Colour: 01 - 14 - 18 Kg 0.11 Electrical powered track fitting - length 600 mm HRGI - 35W max - 12V - GU4 Colour: 01 - 14 - 18 Kg 0.16

CODE

Ă&#x2DC;40

Fitting configuration

Fitting Jack

Fitting On track

Size (mm)

01 white 14 chrome 18 grey NOTE

361

High-bay luminaire for very low voltage halogen lamps. Jack or electrical powered track installation. Coated aluminium and satin glass structure.

CODE 5726

5738

5768

5826

5838

Jack - length 150 mm HRGI - 50W max - 12V - GU5.3 Colour: 01 - 14 - 18 Kg 0.06

Jack - length 300 mm HRGI - 50W max - 12V - GU5.3 Colour: 01 - 14 - 18 Kg 0.10

Jack - length 600 HRGI - 50W max - 12V - GU5.3 Colour: 01 - 14 - 18 Kg 0.10

Electrical powered track fitting – length 150 mm HRGI - 50W max - 12V - GU5.3 Colour: 01 - 14 - 18 Kg 0.07

Electrical powered track fitting – length 300 mm HRGI - 50W max - 12V - GU5.3 Colour: 01 - 14 - 18 Kg 0.11

Electrical powered track fitting – length 600 mm HRGI - 50W max - 12V - GU5.3 Colour: 01 - 14 - 18 Kg 0.16

5868

DESCRIPTION

Ø55

Fitting configuration

Fitting Jack Size (mm)

01 white 14 chrome 18 grey NOTE

362

Fitting On track

High-bay luminaire for very low voltage halogen lamps. Jack or electrical powered track installation. Coated aluminium and satin glass structure.

SPOT TRACK

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

5727

5739

5769

5827

5839

5869

DESCRIPTION Jack - length 150 mm HRGI - 35W max - 12V - GU4 Colour: 01 - 14 - 18 Kg 0.06 Jack - length 300 mm HRGI - 35W max - 12V - GU4.3 Colour: 01 - 14 - 18 Kg 0.10 Jack – length 600 mm HRGI - 35W max - 12V - GU4 Colour: 01 - 14 - 18 Kg 0.15 Electrical powered track fitting – length 150 mm HRGI - 35W max - 12V - GU4 Colour: 01 - 14 - 18 Kg 0.07 Electrical powered track fitting – length 300 mm HRGI - 35W max - 12V - GU4 Colour: 01 - 14 - 18 Kg 0.11 Electrical powered track fitting – length 600 mm HRGI - 35W max - 12V - GU4 Colour: 01 - 14 - 18 Kg 0.16

CODE

Ø40

Fitting configuration

Fitting Jack

Fitting On track

Size (mm)

01 white 14 chrome 18 grey NOTE

363

Electrical powered track 12V. Extruded aluminium structure.

CODE 771

772

DESCRIPTION Lenght 1 m Colour: 01 - 02 - 14 - 18 Kg 0.46

100 cm.

Lenght 2 m Colour: 01 - 02 - 14 - 18 Kg 0.90

200 cm.

DESIGN FEATURES

Wire section 2 x 6 mm2. Total load 25A equal to 300W

24 Size (mm)

01 white 02 black 14 chrome 18 grey NOTE

364

Complementary accessories.

SPOT TRACK

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

CODE

DESCRIPTION

776

Left power supply connection Colour: 01 - 02

777

Central power supply connection Colour: 01 - 02

778

Flexible joint Colour: 01 - 02

779

L-joint Colour: 01 - 02

780

Linear joint with contacts Colour: 01 - 02

781

Linear joint without contacts Colour: 01 - 02

782

Track end cover Colour: 01 - 02

783

Track covering 1 m Colour: 01 - 02

784

Set of two ceiling and wall connections

785

High-bay installation with ceiling rose Length: 2 m Colour: 01 - 02

788

Electronic transformer 150VA Colour: 01 - 02

789

Electronic transformer 250VA Colour: 01 - 02

796

Recessed base for spotlights with jack Recessed hole diameter 60 mm - Colour: 01 - 02 - 14 - 18

798

Transformer’s base for spotlights with jack Colour: 01 - 02 - 18

Size (mm)

43 776

777

58 58

270 778

779

780

781

1000 782

783

784

785

43 55 224

175 788

789

100 55 162

Ø60 796

798

01 white 02 black 14 chrome 18 grey NOTE

365

CUBO80

Cubo80, a ceiling-mounted luminaire with an essential design, was created as a special application solution but soon developed as a successful product, thanks to its efficient performance, simple appearance and excellent functionality.

366

Technical specifications Cubo80 is defined by simple and geometric shapes: a parallelepiped with length of 80 x 80 mm and heights of 80, 125 and 300 mm, a cylinder with diameter of 80 mm and height of 80 mm. Each luminaire is composed of two structural elements â&#x20AC;&#x201C; inside and covering the housing. The first accommodates the electrical connections and is made of coated steel sheet. Fixed to the ceiling, it serves as the frame to which the light source â&#x20AC;&#x201C; a mains voltage halogen lamp or a fluorescent lamp with GX53 fitting â&#x20AC;&#x201C; is hooked. The frame and lamp are recessed to the outer profile of the covering, so as to avoid glare problems. The outer body is made of epoxy polyester diamond draw aluminium. The two housings are joined through the two side springs mounted on the inner frame and attached to the inner walls of the outer structure. After securing the frame to the ceiling, the outer structure is inserted from the bottom and hooked to the springs inside the frame. To remove it, simply pull downwards. This construction makes maintenance and access to the luminaire easier.

CUBO80

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

Optical components and light sources Cubo80 accommodates a mains voltage halogen lamp, max 50W, with GU10 fitting. 6W - GX53 fluorescent lamps with built-in ballast. MAINS VOLTAGE HALOGEN LAMPS HSGI - GU10

max 50W

MAINS VOLTAGE FLUORESCENT LAMPS GX53

GX53 - LED Smd

LED

Structural features Installation: ceiling, wall Lamp frame: coated steel sheet Outer frame: coated extruded aluminium Light sources: mains voltage halogen lamp Standard finishing: white, grey, chromium-plated Protection class: IP40 Insulation class: I Power supply: 250V max

Cubo80 installation and maintenance are easier because it is composed of two elements tightly fixed together thanks to the internal springs and that can be easily detached by pulling the outer part.

Types with LED sources.

367

Fixed ceiling and wall mounted luminaire for mains voltage halogen lamps.

HSGI - 50W max - GU10 250V max Colour: 01 - 14 - 18 IP 40

Size (mm)

1350

DESCRIPTION

115

CODE

80 double emission HSGI - 50W max - GU10 250V max Colour: 01 - 14 - 18 IP 40

300

1354

ACCESSORIES 797

High-bay fixing system complete with ceiling rose and rigid stem (length 1200 mm)

01 white 14 chromium-plated 18 grey NOTE

368

Fixed ceiling-mounted luminaire for fluorescent and LED lamps, with built-in ballast.

CUBO80

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

1352

DESCRIPTION

Size (mm)

MICRO-LYNX F - 6W - GX53 MICRO-LYNX LED satin - 1,5W - GX53 230V - 50Hz Colour: 01 - 14 - 18 IP 40

g 80

CODE

White

Red

MICRO-LYNX F - 6W - GX53 MICRO-LYNX LED satin - 1,5W - GX53 230V - 50Hz Colour: 01 - 14 - 18 IP 40

White

1356

Blue

Red

ACCESSORIES 797

High-bay fixing system complete with ceiling rose and rigid stem (length 1200 mm)

01 white 14 chromium-plated 18 grey NOTE

369

QUADRO42

It is suitable for installations in very large and public spaces like offices, halls, commercial areas and selling facilities where constant artificial light is required and light sources should not alter existing chromatic values. Quadro 42 is equipped with compact fluorescent lamps. The electronic ballast is fully integrated in the luminaire design, providing simple installation and giving the luminaire a compact profile that easily integrates with all contexts. The recessed luminaire can be enhanced with a range of accessories including: dark light optical component, decoration rings in white or coloured satin tempered glass and diffusers in tempered glass or opal polycarbonate.

An adjustable bracket allows to install the luminaire into 1 to 45 mm false-ceilings.

372

Technical specifications Quadro 42 structure is made of self-extinguishing thermoplastic material, with vacuum metalised polycarbonate optical components, with anti-scratch treatment and high specularity. Multi faceted optical components improve the quality of light emission and the performance of 26 and 42W compact fluorescent lamps. Installation is quick and simple using the sliding brackets which secure the recessed luminaire in 1 to 45 mm false-ceilings. Moreover, the locking system attaching the luminaire and ballast provides easy and safe electrical connection. Quadro 42 can be installed also in the emergency mode.

Optical components and light sources Quadro 42 has vacuum metalised polycarbonate optical components (V0-UL-94, incandescent wire test at 960째 GWT), with anti-scratch treatment and high specularity. They improve both quality of light and lamp performance. This luminaire uses compact fluorescent lamps (2 x 26 WG24q-3 e 2 x 42 W GX24q-4)

FLUORESCENT LAMPS FSQH (T/E) - G24q-3

2 x 26W

FSMH (T/E) - GX24q-4

2 x 42W

QUADRO42

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

Structural features Installation: recessed Luminaire housing: self-extinguishing thermoplastic material Optical components: high specularity metalised polycarbonate Light sources: compact fluorescent lamps Finishing: white, grey Accessories: dark light optical component, decoration rings in white or coloured satin tempered glass and diffusers in tempered glass or opal polycarbonate, anti-glare shields. Protection class: IP23 Insulation class: I Power supply: 230V - 50Hz

The optical assembly can be taken out for easier installation and maintenance operations of these recessed luminaires.

373

Fixed recessed mounting luminaire for compact fluorescent lamps. It comes complete with ballast.

QUADRO42

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

7442 EL

DESCRIPTION Electronic ballast FSQH (T/E) - 2 x 26W - G24q-3 230V - 50Hz Colour: 01 - 18 IP 23 Kg 2.00

7442 EM

Emergency electronic ballast FSQH (T/E) - 2 x 26W - G24q-3 230V - 50Hz Colour: 01 - 18 IP 23 Kg 2.50

7444 EL

Electronic ballast FSMH (T/E) - 2 x 42W - GX24q-4 230V - 50Hz Colour: 01 - 18 IP 23 Kg 2.00

7444 EM

84 g

Emergency electronic ballast FSMH (T/E) - 2 x 42W - GX24q-4 230V - 50Hz Colour: 01 - 18 IP 23 Kg 2.50

ACCESSORIES

7442 EL - 7444 EL

Dark light optical component Opal louver Sand-blasted glass louver White glass louver with central hole Blue glass louver with central hole Glass louver with central hole

579 578 554 559 564 568

460

171

CODE

310

280 280

7442 EM - 7444 EM 554

564

578

559

568

460

197

579

310 280

PHOTOMETRIC CURVES 84

η =69%

Size (mm) H(m) D1(m) D2(M) Lux Lux 64°+30 42°+37 (med) (max)

FSQ 42W GX24q-4

2.1

1.6 999 2246

4.2

3.3 250 561

6.4

4.9

111 250

8.5

6.6

62 140

10.6 8.2

01 white 18 grey NOTE

374

280

QUADRO26 Smaller than type 42, the side of Quadro 26 recessed luminaire is 212 mm long. Unlike standard recessed luminaires, this lighting system has a square profile and reflector: the new faceted optical components with high specularity allow to control light distribution and luminance and to provide higher quality of light. This luminaire best suits public, working, commercial and exhibition areas where the lamps used – in this case compact fluorescent 13, 18 and 26 W lamps – are longlasting and reduce power consumption cost. Flexibility is enhanced by the available accessories: white or coloured satinated decoration rings, glass or opal polycarbonate diffusers, and anti-glare shields which ensure excellent shielding of light sources to

Technical specifications Quadro 26 is characterised by a self-extinguishing thermoplastic frame, complete with a vacuum metalised polycarbonate reflector with anti-scratch treatment. Installation is easy and does not require any tools: the recessed luminaire is locked by springs to false-ceilings with different depth. Moreover, the locking system attaching the luminaire and ballast provides easy and safe electrical connection. Quadro 26 is available with electromechanical, PF-corrected, electronical and emergency electronical ballasts.

avoid annoying glare problems.

Optical components and light sources Quadro 42 has faceted vacuum metalised polycarbonate optical components (VO-UL-94, incandescent wire test at 960° - GWT), with anti-scratch treatment. Compact fluorescent lamps (2 x 13W G24q-1, 18W G24q-2 and 26W G24q-3). FLUORESCENT LAMPS FSQH (TC-D) - G24q-1 FSQH (TC-D) - G24q-2 FSQH (TC-D) - G24q-3

Quadro 26, unlike other recessed luminaires, features a square reflector and profile. Distribution control is optimised by the high specularity optical component

376

13W 18W 26W

QUADRO26

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

Structural features Installation: recessed Luminaire housing: self-extinguishing thermoplastic material Optical component: high specularity metalised polycarbonate Light sources: compact fluorescent lamps Finishing: white Accessories: decoration rings in white or coloured satin glass, glass or opal polycarbonate diffusers, anti-glare shields, and reflectors Protection class: IP23/IP43 Insulation class: II Power supply: 230V - 50Hz

377

Fixed recessed mounting luminaire for compact fluorescent lamps. It comes complete with ballast.

QUADRO26

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

CODE 7430 EL

DESCRIPTION Electromechanical ballast FSQH (TC-D) - 2 x 13W - G24q-1 230V - 50Hz Colour: 01 IP 23 Kg 1.30

7431 EL

Electromechanical ballast FSQH (TC-D) - 2 x 18W - G24q-2

7431 EM

Emergency electronic ballast FSQH (TC-D) - 2 x 18W - G24q-2

230V - 50Hz Colour: 01 IP 23 Kg 1.30 7432 EL

Electromechanical ballast FSQH (TC-D) - 2 x 26W - G24q-3

7432 EM

Emergency electronic ballast FSQH (TC-D) - 2 x 26W - G24q-3 230V - 50Hz Colour: 01 IP 23 Kg 1.70

ACCESSORIES 553 558 563 569 574 577

Sand-blasted glass louver (IP43) White glass louver with central hole Blue glass louver with central hole Bent glass louver with central hole Anti-glare shields Opal louver (IP43)

553

563

260

577

145

208x128 - h58

212 558

574

569

192 192 Size (mm)

01 white NOTE

378

OPTIMAL

The technical solutions used to design and develop the Optimal recessed luminaire allowed to create a product which combines high lighting performance, long life, and easy installation and maintenance. This very light luminaire can be mounted into falseceilings of different types and depth in a simple and quick way, without using any tools thanks to its adjustable springs. The locking system attaching the luminaire and ballast provides easy and safe electrical connection. The wide range of accessories provide different and custom solutions, including decoration rings in white or coloured satin glass, glass and opal polycarbonate diffusers, and anti-glare shields.

380

Technical specifications Optimal is a recessed luminaire which ensures low consumption costs using compact fluorescent lamps and built-in ballast. The structure is made of selfextinguishing thermoplastic material. The reflector is made of vacuum metalised polycarbonate, with high specularity and performance anti-scratch treatment. This family of recessed luminaires includes electromechanical, PF-corrected electromechanical and emergency electronic ballasts.

OPTIMAL

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

Optical components and light sources Vacuum metalised polycarbonate optical components (V0-UL-94, incandescent wire test at 960째 - GWT), with anti-scratch treatment, high specularity and performance. The luminaires use compact fluorescent lamps (13, 18, 26W, G24q-1/2/3, GX24q-2/3). FLUORESCENT LAMPS FSQH (TC-D) - G24q-1 FSQH (TC-D) - G24q-2 FSQH (TC-D) - G24q-3 FSMH (T) - GX24q-2 FSMH (T) - GX24q-3

13W 18W 26W 18W 26W

Structural features Installation: recessed Luminaire housing: self-extinguishing thermoplastic material Optical component: metalised polycarbonate Light sources: compact fluorescent lamps Finishing: white Accessories: decoration rings in white or coloured satin glass, glass or opal polycarbonate diffusers, and antiglare shields Protection class: IP23/IP44 Insulation class: II Power supply: 230V 50Hz.

Optimal is the right solution for installation needs requiring quality performance and reduced installation, maintenance and usage costs.

381

Fixed recessed mounting luminaire for compact fluorescent lamps. It comes complete with ballast.

CODE

DESCRIPTION Electromechanical ballast FSQH (TC-D) - 13W - G24q-1

7400 EL

230V - 50Hz Colour: 01 IP 43 Kg 0.75

40 g

Electromechanical ballast FSMH (T) - 18W - GX24q-2

7401 EL

230V - 50Hz Colour: 01 IP 43 Kg 0.76 7402 EL

Electromechanical ballast FSMH (T) - 26W - GX24q-3

7402 EM

Emergency electronic ballast FSMH (T) - 26W - GX24q-3 230V - 50Hz Colour: 01 IP 43 Kg 1.00

ACCESSORIES For code 7400, 7401, 7402 550 Sand-blasted glass louver 551 White glass ring 552 Blue glass ring

215 100

208x70 - h58

Ø150 Ø135

550

552

551

Size (mm)

PHOTOMETRIC CURVES 40

η =60% 180

41 H(m) D1(m) D2(M) Lux Lux 2x47° 2x49° (med) (max)

2.2

2.3

180 90

60 180

100

42 H(m) D1(m) D2(M) Lux Lux 2x45° 2x51° (med) (max)

2.5

90 240

5.5

7.8

100

4.40 4.6

6.6 6.8

8.8

11.4

FSQ 18W GX24d-2

η =70% 180

H(m) D1(m) D2(M) Lux Lux 2x46° 2x51° (med) (max)

2.5

129 270

4.2

5.5

6.4

7.8

8.4

10.4 12.8

120

200

FSQ 13W G24d-1

η =65%

240

12.8

FSQ 26W GX24d-3

01 white NOTE

382

Fixed recessed mounting luminaire for compact fluorescent lamps. It comes complete with ballast.

OPTIMAL

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

CODE 7420 EL

DESCRIPTION Electromechanical ballast FSQH (TC-D) - 2 x 13W - G24q-1 230V - 50Hz Colour: 01 IP 23 Kg 1.40

7421 EL

Electromechanical ballast FSQH (TC-D) - 2 x 18W - G24q-2

7421 EM

Emergency electronic ballast FSQH (TC-D) - 2 x 18W - G24q-2

80 g

230V - 50Hz Colour: 01 IP 23 Kg 1.40 7422 EL

Electromechanical ballast FSQH (TC-D) - 2 x 26W - G24q-3

7422 EM

Emergency electronic ballast FSQH (TC-D) - 2 x 26W - G24q-3 230V - 50Hz Colour: 01 IP 23 Kg 1.80

ACCESSORIES For code 7420, 7421, 7422 560 Sand-blasted glass louver (IP43) 561 White glass ring - (IP43) 562 Blue glass ring - (IP43) 574 Anti-glare shields - (IP43) 576 Opal louver - (IP44)

270 145

208x128 - h58

Ø210 Ø190

560

562

576

561

574 Size (mm)

PHOTOMETRIC CURVES 78

80 H(m) D1(m) D2(M) Lux Lux 2x45° 2x30° (med) (max)

FSQ 2x13W G24d-1

FSQ 2x18W G24d-2

FSQ 2x26W G24d-3

1.6

452 1216

3.2

2.2

96 312

4.8

3.8

138

6.4

01 white NOTE

383

SYNERGY

Technical specifications The structure of Synergy recessed luminaires is made of self-extinguishing thermoplastic material, with vacuum metalised polycarbonate reflectors, with anti-scratch treatment, and high specularity and performance. Installation is easy: simply fix the luminaire housing with the special springs which allow to mount this lighting system into false-ceilings of different depth. Moreover, the locking system attaching the luminaire and ballast provides quick and safe electrical connection. The inner part of the optical components is vacuum metalised. Synergy can be installed also in the emergency mode. The ceiling mounted types are made of UV-stabilised epoxy polyester aluminium. The optical component and outer ring are made of self-extinguishing polycarbonate with vacuum metalised reflectors (height: 106 and 160 mm). All luminaires can be equipped with electromechanical, PF-corrected electromechanical, electronic and electronic emergency ballasts.

386

Optical components and light sources Recessed and ceiling mounted luminaires include metalised polycarbonate optical components (V0-UL-94, incandescent wire test at 960째 - GWT), with anti-scratch treatment, high specularity and performance. Recessed luminaires use fluorescent lamps (13, 18, 26W G24q1/2/3, G24-q1/2/3, GX24q-2/3), like ceiling light fixtures (13, 18, 26 W G24q-1/2/3). COMPACT FLUORESCENT LAMPS FSQH (TC-D) - G24q-1 FSQH (TC-D) - G24q-2 FSQH (TC-D) - G24q-3 FSMH (T) - GX24q-2 FSMH (T) - GX24q-3

13W 18W 26W 18W 26W

SYNERGY

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

Structural features Installation: recessed, ceiling mounted Luminaire housing: recessed luminaire in self-extinguishing thermoplastic material; ceiling light fixture in coated aluminium Optical component: metalised polycarbonate Light sources: compact fluorescent lamps Finishing: white Accessories: decoration rings in white or coloured satin glass, glass or opal polycarbonate diffusers, dark-light reflectors, and anti-glare shields Protection class: IP23/IP43/IP44 Insulation class: II Power supply: 230V - 50Hz.

Recessed or ceilingmounted, Synergy is a light, safe and compact luminaire suitable for coordinated installation where maximum comfort and low consumption are key issues.

387

Fixed recessed mounting luminaire for compact fluorescent lamps. It comes complete with ballast.

DESCRIPTION Electromechanical ballast FSQH (TC-D) - 2 x 13W - G24q-1 230V - 50Hz - Colour: 01 - IP 23 - Kg 1.45

7220 EL

Electromechanical ballast FSQH (TC-D) - 2 x 18W - G24q-2 Dimmerable electronic ballast 1/10V FSQH (TC-D) - 2 x 18W - G24q-2 Emergency electronic ballast FSQH (TC-D) - 2 x 18W - G24q-2 230V - 50Hz - Colour: 01 - IP 23 - Kg 1.72

7221 EL 7221 ELD 7221 EM

Electromechanical ballast FSQH (TC-D) - 2 x 26W - G24q-3 Dimmerable electronic ballast 1/10V FSQH (TC-D) - 2 x 26W - G24q-3 Emergency electronic ballast FSQH (TC-D) - 2 x 26W - G24q-3 230V - 50Hz - Colour: 01 - IP 23 - Kg 2.10

7222 EL 7222 ELD 7222 EM

ACCESSORIES

7220

For code 7220 601 Transparent glass louver - (IP44) 602 Silk-screened glass louver - (IP44) 603 Sand-blasted glass louver (IP44) 604 Dark light optical component - (IP43) 605 GI Yellow polycarbonate ring – (IP44) 605 BL Blue polycarbonate ring - (IP44) 605 BI White polycarbonate ring - (IP44)

For code 7221, 7222 611 Transparent glass louver - (IP44) 612 Silk-screened glass louver - (IP44) 613 Sand-blasted glass louver (IP44) 614 Dark light optical component - (IP43) 615 GI Yellow polycarbonate ring – (IP44) 615 BL Blue polycarbonate ring - (IP44) 615 BI White polycarbonate ring - (IP44)

208x128 - h58

107

CODE

ø 210 ø 185

7221 - 7222 602-612

603-613

604-614

605 GI-615 GI

605 BL-615 BL

605 BI-615 BI

208x128 - h58

107

601-611

ø 245

PHOTOMETRIC CURVES 31

η =63% 180

32 H(m) D1(m) D2(M) Lux Lux 2x58° 2x48° (med) (max)

3.6

FSQ 2x13W G24d-1

180 90

2.2 140 450

100

200

η =64%

33 H(m) D1(m) D2(M) Lux Lux 2x60° 2x52° (med) (max)

7.4

4.4

113

11.2

18.8

200

FSQ 2x18 W G24d-2

180 90

2.6 190 510

ø 220 H(m) D1(m) D2(M) Lux Lux 2x60° 2x54° (med) (max)

210 766

60 191

Size (mm)

100

η =65%

50 130

7.5

9.5

200

FSQ 2x26W G24d-3

01 white NOTE

388

Fixed recessed mounting luminaire for compact fluorescent lamps. It comes complete with ballast.

SYNERGY

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

DESCRIPTION Electromechanical ballast FSQH (TC-D) - 2 x 13W - G24q-1 230V - 50Hz - Colour: 01 - IP 23 - Kg 1.45

7120 EL

7121 EL 7121 ELD 7121 EM

7122 EL 7122 ELD 7122 EM

29 g

30 g

94 with sand-blasted glass louver

ACCESSORIES

7120 For code 7121, 7122 611 Transparent glass louver - (IP44) 612 Silk-screened glass louver - (IP44) 613 Sand-blasted glass louver (IP44) 614 Dark light optical component - (IP43) 615 GI Yellow polycarbonate ring - (IP44) 615 BL Blue polycarbonate ring - (IP44) 615 BI White polycarbonate ring - (IP44)

For code 7120 601 Transparent glass louver - (IP44) 602 Silk-screened glass louver - (IP44) 603 Sand-blasted glass louver (IP44) 604 Dark light optical component - (IP43) 605 GI Yellow polycarbonate ring - (IP44) 605 BL Blue polycarbonate ring - (IP44) 605 BI White polycarbonate ring - (IP44)

208x128 - h58

140

CODE

ø 210 ø 185

7121 - 7122 603-613

605 GI-615 GI

605 BI-615 BI

602-612

604-614

605 BL-615 BL

208x128 - h58

158

601-611

PHOTOMETRIC CURVES 28

η =67%

180 90

H(m) D1(m) D2(M) Lux Lux 2x50° 2x40° (med) (max)

2.4

1.6

190 600

2 3

4.6

3.2

60 150

4.8

100

η =63% 180

30 H(m) D1(m) D2(M) Lux Lux 2x52° 2x46° (med) (max)

2.6

FSQ 2x13W G24d-1

6.4

200

FSQ 2x18W G24d-2

180 90

200 650

100

200

ø 245

η =63% H(m) D1(m) D2(M) Lux Lux 2x52° 2x48° (med) (max)

2.6

ø 220

2.2 260 826

100

70 160

7.5

4.4

7.5

75 207 92

9.5

200

9.5

FSQ 2x26W G24d-3

Size (mm)

94 180 90

H(m) D1(m) D2(M) Lux Lux 2x45° 2x45° (med) (max) 90

390 650

98 163

24.6 41

15.6 26

100

200

FSQ 2x26W G24d-3

389

Fixed recessed mounting luminaire with wall-washer for compact fluorescent lamps. It comes complete with ballast.

CODE

DESCRIPTION

7223 EL

Electromechanical ballast FSQH (TC-D) - 2 x 26W - G24q-3

7223 ELD

Dimmerable electronic ballast 1/10V FSQH (TC-D) - 2 x 26W - G24q-3

7223 EM

Emergency electronic ballast FSQH (TC-D) - 2 x 26W - G24q-3

220

230V - 50Hz Colour: 01 - IP 23 - Kg 2.10

208x128 - h58

ø 245 ø 220 Size (mm)

01 white NOTE

390

Fixed recessed mounting luminaire for compact fluorescent lamps. It comes complete with ballast.

SYNERGY

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

CODE

DESCRIPTION Electromechanical ballast FSQH (TC-D) - 13W - G24q-1

7020 EL

230V - 50Hz - Colour: 01 - IP 43 - Kg 0.89

Electromechanical ballast FSMH (T) - 18W - GX24q-2

7021 EL

230V - 50Hz - Colour: 01 - IP 43 - Kg 0.89

7022 EL

Electromechanical ballast FSMH (T) - 26W - GX24q-3

7022 EM

Emergency electronic ballast FSMH (T) - 26W - GX24q-3 230V - 50Hz - Colour: 01 - IP 43 - Kg 1.10

ACCESSORIES

170

For code 7020, 7021, 7022 601 Transparent glass louver - (IP44) 602 Silk-screened glass louver - (IP44) 603 Sand-blasted glass louver (IP44) 604 Dark light optical component - (IP43) 605 GI Yellow polycarbonate ring - (IP44) 605 BL Blue polycarbonate ring - (IP44) 605 BI White polycarbonate ring - (IP44)

ø 210 ø 185 Size (mm)

601

603

605 GI

605 BI

602

604

605 BL

PHOTOMETRIC CURVES η =65%

180 90

35 H(m) D1(m) D2(M) Lux Lux 2x50° 2x50° (med) (max)

2.5

70 192

5.5

7.8

η =70% 180

36 H(m) D1(m) D2(M) Lux Lux 2x52° 2x52° (med) (max)

2.6

93 256

5.8

11.8 11.8

η =75% 180

H(m) D1(m) D2(M) Lux Lux 2x52° 2x52° (med) (max)

2.6

2.6 100 300

5.8

11.8 11.8

100

200

150

FSQ 13W G24d-1

12.8 12.8

FSQ 18W GX24d-2

FSQ 26W GX24d-3

01 white NOTE

391

Fixed ceiling mounting luminaire for compact fluorescent lamps. Coated aluminium structure, polycarbonate optical component and outer ring. It comes complete with power-factor-corrected electromechanical ballast.

SYNERGY

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

CODE

DESCRIPTION FSQ (TC-D) - 2 x 13W - G24d-1 230V - 50Hz Colour: 01 Kg 1.78

7230

FSQ (TC-D) - 2 x 18W - G24d-2 230V - 50Hz Colour: 01 IP 40 Kg 2.10

FSQ (TC-D) - 2 x 26W - G24d-3 230V - 50Hz Colour: 01 IP 40 Kg 2.50

FSQ (TC-D) - 2 x 18W - G24d-2 230V - 50Hz Colour: 01 Kg 1.82

7231

FSQ (TC-D) - 2 x 26W - G24d-3 230V - 50Hz Colour: 01 Kg 1.86

7232

7241

7242

ACCESSORIES

7230

For code 7230 601 Transparent glass louver 602 Silk-screened glass louver 603 Sand-blasted glass louver 604 Dark light optical component 605 GI Yellow polycarbonate ring 605 BL Blue polycarbonate ring 605 BI White polycarbonate ring

106

For code 7231, 7232, 7241, 7242 611 Transparent glass louver 612 Silk-screened glass louver 613 Sand-blasted glass louver 614 Dark light optical component 615 GI Yellow polycarbonate ring 615 BL Blue polycarbonate ring 615 BI White polycarbonate ring

ø 303

115

7231 - 7232

ø 360 601-611

603-613

605 GI-615 GI

605 BI-615 BI

160

7241 - 7242

602-612

604-614

605 BL-615 BL

ø 253 PHOTOMETRIC CURVES 31

Size (mm)

η =63% 180

32 H(m) D1(m) D2(M) Lux Lux 2x58° 2x48° (med) (max)

3.6

2.2 140 450

7.4

4.4

113

11.2

18.8

100

200

FSQ 2x13W G24d-1

η =64% 180

33 H(m) D1(m) D2(M) Lux Lux 2x60° 2x52° (med) (max)

50 130

7.5

9.5

FSQ 2x18 W G24d-2

180 90

2.6 190 510

H(m) D1(m) D2(M) Lux Lux 2x60° 2x54° (med) (max)

210 766

60 191

100

200

η =65%

200

FSQ 2x26W G24d-3

01 white NOTE

392

ENERGIE

Energie recessed, low depth luminaire is designed for use with energy saving fluorescent lamps and combines high performance and flexibility thanks to a wide range of accessories. Technical specifications This fixed recessed luminaire is only 94 mm deep and perfectly meets all installation needs in very low falseceilings. The recessed luminaire has two different dimensions: diameter 185 mm and 220 mm. The polycarbonate structure is enhanced by a UV-stabilised epoxy polyester die-cast aluminium ring. The special vacuum metalised polycarbonate optical components (V0-UL-94, incandescent wire test at 960째 GWT), with anti-scratch treatment, high specularity and performance allow to obtain excellent visual comfort and control of light emission. This luminaire uses compact fluorescent lamps which provide the advantage of reducing the operating costs.

396

Synergy can also be installed in the emergency mode. White or coloured satin glass decoration rings, glass and opal polycarbonate diffusers, and anti-glare shields which ensure excellent shielding of the light sources, complement the range of accessories, and make Energie a luminaire able to combine efficient use and high flexibility. All the luminaires belonging to this family are available with electromechanical, PF-corrected electromechanical, electronic, dimmerable electronic, emergency electronic ballasts.

ENERGIE

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

Optical components and light sources Energie is equipped with vacuum metalised polycarbonate optical components (V0-UL-94, incandescent wire test at 960Â° - GWT), with anti-scratch treatment, high specularity and performance. This luminaire uses compact fluorescent lamps (13, 18, 26W, G24q-1/2/3). COMPACT FLUORESCENT LAMPS FSQH (TC-D) - G24q-1 FSQH (TC-D) - G24q-2 FSQH (TC-D) - G24q-3

13W 18W 26W

Structural features Installation: recessed Luminaire housing: polycarbonate, outer ring in coated die-cast aluminium Optical components: metalised polycarbonate Light sources: compact fluorescent lamps Finishing: white, grey Accessories: decoration rings in white or coloured satin glass, glass or opal polycarbonate diffusers and anti-glare shields Protection class: IP23/IP43 Insulation class: II Power supply: 230V - 50Hz.

Low-cost use, flexibility and compact dimensions â&#x20AC;&#x201C; depth 94 mm: Energie can be installed in very low false-ceilings, too.

397

Fixed recessed mounting luminaire for compact fluorescent lamps. It comes complete with ballast.

ENERGIE

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

CODE

DESCRIPTION Electromechanical ballast FSQH (TC-D) - 2 x 13W - G24q-1

7200 EL

230V - 50Hz - Colour: 01 - 18 - IP 23 - Kg 1.30

7201 EL

Electromechanical ballast FSQH (TC-D) - 2 x 18W - G24q-2

7201 ELD

Dimmerable electronic ballast 1/10V FSQH (TC-D) - 2 x 18W - G24q-2

7201 EM

Dimmerable electronic ballast FSQH (TC-D) - 2 x 18W - G24q-2

230V - 50Hz - Colour: 01 - 18 - IP 23 - Kg 1.40 7202 EL

Electromechanical ballast FSQH (TC-D) - 2 x 26W - G24q-3

7202 ELD

Dimmerable electronic ballast 1/10V FSQH (TC-D) - 2 x 26W - G24q-3

7202 EM

Dimmerable electronic ballast FSQH (TC-D) - 2 x 26W - G24q-3 230V - 50Hz - Colour: 01 - 18 - IP 23 - Kg 1.80

7200 ACCESSORIES 208x128 - h58

For code 7201, 7202 570 Sand-blasted glass louver - (IP43) 571 White glass ring - (IP43) 572 Blue glass ring - (IP43) 574 Anti-glare shields - (IP43)

For code 7200 565 Sand-blasted glass louver - (IP43) 566 White glass ring - (IP43) 567 Blue glass ring - (IP43)

Ø185 Ø170

7201 - 7202 208x128 - h58 566-571

567-572

574

565-570

Ø220 PHOTOMETRIC CURVES 37

η ι=67% 180

38 H(m) D1(m) D2(M) Lux Lux 2x50° 2x45° (med) (max)

2.4

180 90

161 500

100

39 H(m) D1(m) D2(M) Lux Lux 2x56° 2x51° (med) (max)

2.4

4.6

40 127

200

FSQ 2x18W G24d-2

180 90

Ø205 H(m) D1(m) D2(M) Lux Lux 2x58° 2x54° (med) (max)

3.8

231 916

7.8

58 229

150

2 225

η ι=74%

171 618

150

FSQ 2x13W G24d-1

η ι=68%

4.8

155

7.2

26 182

Size (mm)

225

FSQ 2x26W G24d-3

01 white 18 grey NOTE

398

SPINNER

Quattrobi's Spinner comes in two different versions. Beyond meeting a large number of installation needs, this solution allows to match the lighting systems with the environments to be illuminated. Their design ensures full adjustability on the horizontal axis and vertical tilting. The three optical components in super-pure aluminium, available for both types, allow to obtain precision lighting parameters based on the environmental context, using narrow and concentrated beams or wide and diffuse light (12°, 36° and 52°). Enhanced performance are provided by front louvers in tempered, transparent, anti-UV, sand-blasted glass and special louvers to illuminate meat counters. Light sources include discharge metal halide vapour lamps. Optical components and light sources The available optical components in oxidised and polished super-pure aluminium include three types: 12°, 36°, 52°. This allows to add maximum value to the lamp features, optimising the effects and choosing the best technical solutions: diffuse and uniform light in large spaces and contrast between light and shadows in exhibition areas. Both Spinner types use discharge lamps, i.e.: 35, 70 and 150 W G12 for the recessed luminaire, 70 W for the projector.

400

α 12°

α 52°

α 36°

100

300

150

450

75 150

H mm

Ø mm

Med Lux Max Lux

H mm

Ø mm

1000 2000 3000 4000 5000

220 450 670 900 1120

19381 32343 4845 8086 2153 3594 1211 2120 775 1295

1000 2000 3000 4000 5000

650 1310 1960 2610 3270

MT (CDM-T) - 70W - G12 Flow 6400 Im Max 32342.80 cd

The three Spinner optical components (12°, 36° and 52°) allow to optimise the luminaire lighting potential to create narrow and concentrated or wide and diffuse light.

750

Med Lux Max Lux

5764 1441 640 360 231

MT (CDM-T) - 70W - G12 Flow 6400 Im Max 9734.80 cd

450

750

500

9734 2434 1082 608 389

H mm

15 Ø mm

1000 950 2000 1910 3000 2860 4000 3820 5000 4770

Med Lux Max Lux

5547 1387 616 347 222

10737 2684 1193 671 429

MT (CDM-T) - 150W - G12 Flow 14000 Im Max 10737.13 cd

DISCHARGE LAMPS MT (CDM-T) - G12 MT (CDM-T) - G12 MT (CDM-T) - G12 MT (CDM-TC) - G8.5 MT (CDM-TC) - G8.5

35W 70W 150W 35W 70W

SPINNER

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

Vertical adjustment thanks to off-centred optical assembly allows to take full advantage from the light flow.

Structural features Installation: recessed luminaire Luminaire housing: die-cast aluminium Louver: tempered, transparent, anti-UV, sand-blasted glass and special louvers to illuminate meat counters Reflector: super-pure oxidised and polished aluminium Light sources: discharge lamps Standard finishing: white, grey Protection class: IP43 Insulation class: I Power supply: with separate system

401

Adjustable recessed luminaire for discharge lamps. Separate power supply: 230V - 50Hz. Ballast not included.

CODE

DESCRIPTION

Size (mm)

MT (CDM-T) - 35W - 70W - 150W - G12 Colour: 01 - 18 IP 43 Kg 0.90 Glass louver available on demand Projector equipped with 2 x 18° standard reflector

156

9030

30°

Ø185

335° Ø196

MT (CDM-TC) - 35W - 70W - G8.5 Colour: 01 - 18 IP 43 Kg 0.80 Projector equipped with 2 x 10° standard reflector

135

9031

30° Ø128

Ø135

ACCESSORIES FOR CODE 9030 590 591 592 593 930 934 936

Transparent glass louver UV glass louver Glass louver for meat counters Sand-blasted glass louver Reflector 2 x 6° Reflector 2 x 26° Electrical connection kit

590-591-592 593

930-934

936

PHOTOMETRIC CURVES 72 H(m) D1(m) D2(M) Lux Lux 2x18° 2x18° (med) (max)

1 0.65 0.65 5764 9734 150

1.31

1.31 1441 2434

3 1.96 1.96 640 1082 750

MT 150 W G12

4 2.61 2.61 360 608 5 3.27 3.27 231 389

01 white 18 grey The optical housing can be adjusted separately on both axes. With code 9030, a glass louver must always be installed NOTE

402

Complementary accessories: ballasts.

SPINNER

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

70W Power-factor-corrected electromechanical ballast with timed igniter for luminaires with metal iodide lamps

150W Power-factor-corrected electromechanical ballast with timed igniter for luminaires with metal iodide lamps

g 55

424 T

35W Power-factor-corrected electromechanical ballast with timed igniter for luminaires with metal iodide lamps

220

422 T

426 T

Size (mm)

DESCRIPTION

CODE

250

427

150W Electronic ballast for luminaires equipped with metal iodide lamps

70W Electronic ballast for luminaires equipped with metal iodide lamps

g 39

425

130 F

g 88

35W Electronic ballast for luminaires equipped with metal iodide lamps

423

160

403

SCARICA

A wide and comprehensive range of recessed luminaires with fixed and adjustable optical assembly and small height for any false-ceilings.

Family technical specifications Fixed or adjustable recessed luminaires, Scarica series products have a compact and low design (96 to 195 mm), for installation in very low false-ceilings. Designed to accommodate metal halide vapour and high pressure sodium bulbs, these luminaires are made of UV-stabilised epoxy polyester die-cast aluminium and are equipped with high efficiency optical components in oxidised or polished super-pure aluminium. Some types feature optical assemblies which can be adjusted separately both vertically and horizontally. All types have a front safety louver in transparent or sand-blasted tempered glass.

406

Installation and maintenance of the recessed luminaires are streamlined by special fixing springs, attached to the structure on the external ring, without using any tools. The family is complemented with two ceiling mounting types - a truncated cone and a cylinder - with ballast: made of aluminium with oxidised and polished superpure aluminium optical components, these lighting systems feature anti-glare satin glass protection louvers.

SCARICA

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

The optical housing of this luminaire family (code 9035, 9036, 9037, 9038) can be fully adjusted horizontally (350째) and vertically (75째).

DISCHARGE LAMPS MT (CDM-T) - G12 MT (CDM-T) - G12 MT (CDM-T) - G12 VERY LOW VOLTAGE HALOGEN LAMPS 12V

35W 70W 150W

HMG (HALOSPOT111) - G53 max 100W MAINS VOLTAGE HALOGEN LAMPS HDG - R7s - 74.9 mm

max 100W

407

Adjustable recessed luminaire for discharge lamps, mains voltage halogen and very low voltage halogen lamps. Separate power supply: 230V - 50Hz (discharge lamps) - 12V (halogen lamps). Ballast not included.

SCARICA

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

CODE

DESCRIPTION MT (CDM-T) - 35W - 70W - 150W - G12 Colour: 01 - 18 IP 43 F 93 Kg 0.90 Complete with sand-blasted glass front louver Reflector 2 x 30° Complete with power-factor-corrected electromechanical ballast

9035

HMG (HALOSPOT111) - 100W max - 12V - G53 Colour: 01 - 18 IP 43 Kg 0.90

9036

HDG - 74.9 mm - 100W max - R7s 250V max Colour: 01 - 18 IP 43 Kg 0.90 Complete with sand-blasted glass front louver

9037

ACCESSORIES 156

Electrical connection kit Reflector 2x18° (only for code 9035)

936 931

360°

60° 936

Ø196 Ø185

PHOTOMETRIC CURVES 93 180 90

H(m) D1(m) D2(M) Lux Lux 2x30° 2x30° (med) (max)

Size (mm)

1.16 1.16 1056 1759

100

300

MT (CDM-T) 70W - G12

2.3

3.46 3.46 118 197

2.3 266 444

4.62 4.62 67

112

5.78 5.78 43

01 white 18 grey The optical housing can be adjusted separately on both axes. For ballasts, see following pages NOTE

408

All luminaires in this family have a ring with external diameter of 210 mm.

A plug at the top of the luminaire provides quick connection to the ballast during installation.

410

SCARICA

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

This recessed luminaire family uses G12 one-fitting discharge lamps with power up to 150 W, PG12-1 with power up to 100W, and RX7 two-connection lamps with power up to 150 W.

DISCHARGE LAMPS MT (CDM-T) - G12

CODES 35W, 70W, 150W

9100

50W, 100W

9102

MD (CDM-T) - RX7s

70W

9104 9106

MD (CDM-T) - RX7s

150W

9108

70W

9105 9011 9012

STH (SDW-T) - PG12-1

MD (CDM-TD) - RX7s

An asymmetric reflector model complements this recessed luminaire family.

Fixed recessed luminaire for discharge lamps. Die-cast aluminium structure. Separate power supply: 230V - 50Hz. Ballast not included. Front protection louver in silk-screened tempered glass.

Size (mm)

DESCRIPTION MT (CDM-T) - 35W - 70W - 150W - G12 Colour: 01 - 18 IP 44 Kg 0.64

9100

165

CODE

g Ø210 Ø190

44 g

195

STH (SDW-T) - 50W - 100W - PG12-1 Colour: 01 - 18 IP 44 Kg 0.64

9102

Ø210 Ø190

168

MD (CDM-T) - 70W - RX7s Colour: 01 - 18 IP 44 Kg 0.80 Transparent tempered glass

9104

Ø210

MD (CDM-T) - 70W - RX7s Colour: 01 - 18 IP 44

9106

46 g

MD (CDM-T) - 150W - RX7s Colour: 01 - 18 IP 44 Kg 0.70

9108

130

Ø190

Ø210 F

g Ø190

ACCESSORIES Electrical connection kit

936

PHOTOMETRIC CURVES 43

η =65% 180

44 H(m) D1(m) D2(M) Lux Lux 2x30° 2x30° (med) (max)

2.2

2.2 196 515 3.8 129 192

MT 70 W G12

412

180 90

811 1600

223

375

η =68%

46 H(m) D1(m) D2(M) Lux Lux 2x37° 2x37° (med) (max)

1.5

1.5 1165 2660

291 665

150

3.8

110

8.4

180 90

H(m) D1(m) D2(M) Lux Lux 2x45° 2x45° (med) (max)

769 1659

192 415

120

4.5

129 296

73 166

47 106

250

STH 100 W PG12-1

η =61%

85 184

48 104

220

MD 70 W RX7s

01 white 18 grey For ballasts, see following pages NOTE

Fixed recessed luminaire for discharge lamps. Die-cast aluminium structure. Separate power supply: 230V - 50Hz. Ballast not included. Front protection louver in transparent tempered glass.

SCARICA

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

Size (mm)

DESCRIPTION MD (CDM-TD) - 70W - RX7s Colour: 01 - 18 IP 23 Kg 0.50 Silk-screened tempered glass

9105

CODE

50 g

Ø165 Ø152

170

MD (CDM-TD) - 70W - RX7s Colour: 01 - 18 IP 44 Kg 0.65

9011

Ø185 Ø177

54 g

180

MD (CDM-TD) - 150W - RX7s Colour: 01 - 18 IP 44 Kg 0.75

9012

Ø220 Ø212

ACCESSORIES For code 9011 - 9012 936 Electrical connection kit 565 Sand-blasted glass louver (for code 9011) 566 White glass ring (for code 9011) 567 Blue glass ring (for code 9011) Sand-blasted glass louver (for code 9012) White glass ring (for code 9012) Blue glass ring (for code 9012)

570 571 572

936

PHOTOMETRIC CURVES 50

η =60% 180

53 H(m) D1(m) D2(M) Lux Lux 2x40° 2x40° (med) (max)

1.5

611 1500

180 400

180 90

54 H(m) D1(m) D2(M) Lux Lux 2x35° 2x35° (med) (max)

1.5

711 1600

180 410

4.5

80 180

100

150

30 100

MD 70 W RX7s

η =62% 180

H(m) D1(m) D2(M) Lux Lux 2x35° 2x35° (med) (max)

1.5

1411 3100

350 800

4.5

140 340

80 190

50 100

200

MD 70 W RX7s

η =70%

400

40 100

MD 150 W RX7s

01 white 18 grey For ballasts, see following pages NOTE

413

Adjustable recessed luminaire for discharge lamps. Die-cast aluminium structure, with transparent tempered glass louver. Separate power supply: 230V - 50Hz. Ballast not included.

CODE

DESCRIPTION

Size (mm)

180

MD (CDM-TD) - 70W - RX7s Colour: 01 - 18 IP 40 Kg 0.80

9015

48 g

60°

147x236 120

MD (CDM-TD) - 150W - RX7s Colour: 01 - 18 IP 40 Kg 0.80

9016

230

STH (SDW-T) - 50W - 100W - PG12-1 Colour: 01 - 18 IP 40 Kg 0.80

9021

ACCESSORIES Electrical connection kit

936

PHOTOMETRIC CURVES 48

η =61% 180

49 H(m) D1(m) D2(M) Lux Lux 2x46° 2x44° (med) (max)

2.2

450 1000

4.4

113 253

100

180 90

H(m) D1(m) D2(M) Lux Lux 2x52° 2x48° (med) (max)

2.8

2.4 864 2100

5.6

4.8 216 526

100

6.6

112

11.4

200

MD 70 W RX7s

η =62%

6.8

7.2

96 234

11.8

131

200

MD 150 W RX7s

01 white 18 grey NOTE

416

Complementary accessories: ballasts and transformers.

SCARICA

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

424 T

70W Power-factor-corrected electromechanical ballast with timed igniter for luminaires with metal iodide lamps

150W Power-factor-corrected electromechanical ballast with timed igniter for luminaires with metal iodide lamps

g 220

426 T

35W Power-factor-corrected electromechanical ballast with timed igniter for luminaires with metal iodide lamps

422 T

Size (mm)

ACCESSORIES

250

35W Electronic ballast for luminaires with metal iodide lamps

425

70W Electronic ballast for luminaires with metal iodide lamps

150W Electronic ballast for luminaires with metal iodide lamps

39 130

g 39

427

423

433

50W Electronic ballast for luminaires with Mini White Son GX12-1 lamps

435

100W Electronic ballast for luminaires with Mini White Son GX12-1 lamps

g 100

290

130

416

70W Electronic transformer A=110 - B=50 - C=35

417

105W Electronic transformer A=110 - B=50 - C=35

418

200W Electronic transformer A=225 - B=55 - C=45

100W Power-factor-corrected electromechanical ballast for luminaires with STH lamps (SDW-T) White Son

434

50W Power-factor-corrected electromechanical ballast for luminaires with STH lamps (SDW-T) White Son

432

160

417

These ceiling mounting luminaires are equipped with RX7s twoconnection lamps.

418

A handy door hinged to the luminaire housing ensures easy lamp replacement and maintenance operations.

Fixed ceiling mounting luminaire for discharge lamps. Coated aluminium structure, die-cast aluminium external ring. Complete with PF-corrected, electromechanical ballast and anti-glare sand-blasted glass louver.

SCARICA

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

9120

9130

MD (CDM-TD) - 70W - RX7s 230V - 50Hz Colour: 01 - 18 IP 40 Kg 2.60

MD (CDM-TD) - 70W - RX7s 230V - 50Hz Colour: 01 - 18 IP 40 Kg 2.80

110

Size (mm)

DESCRIPTION 46 g

Ø300

46 g

180

CODE

Ø253

PHOTOMETRIC CURVES 46

η =61% 180

H(m) D1(m) D2(M) Lux Lux 2x45° 2x45° (med) (max)

769 1659

192 415

85 184

48 104

120

220

MD 70 W RX7s

01 white 18 grey NOTE

419

FOOD

Light for nourishment, feed yourself with light.

Quattrobi presents products created for a sector where what you see is not just what is being sold, but what is also then eaten and drank. This is the food and catering sector, where light deďŹ nes ďŹ&#x201A;avour and draws attention to it. Astonishing and effective technical lighting systems, designed to show off the colour of a fruit, the pastel tints of a spice, the details of a particular dish and the transparencies of a good wine.

NEW

P04 P06 Indy Cloud Minni Sail Scarica

FOOD UNDER THE SPOTLIGHTS Colour tones, colour rendering, levels of luminance and efficiency of light sources: all these parameters, combined with the most specific features of luminaire reflectors, play a key role in enhancing food products of various origins displayed in the counters of shops and supermarkets. The perception of freshness and palatability of the displayed goods is strongly influenced by the effects of appropriate or inappropriate lighting. Scientific studies on the issue show how the colours of meat and fresh cold cuts are enhanced by using light with low colour temperatures (warm reddish light), while fish requires a higher colour temperature (cold light). The proper lighting contributes to creating a perfect environment in sales outlets, prompting the customers to buy, particularly in the case of fresh products. Appropriate lighting communicates, positively and engagingly, the quality of the food on sale, its appearance and its natural colour, as well as the value of the service offered.

422

Among the light sources on the market, discharge lamps are one of the most popular choices. This is why Quattrobi develop specific series of luminaires for the food industry, such as the recessed luminaires of the Scarica series, the Cloud, P04, P06, and Indy projectors and the Minni and Sail high-bay luminaires. All these luminaires are equipped with 70 watt discharge lamps, electrical ballasts and front louver. Based upon the type of luminaire used, the green of the fresh vegetables will appear brighter, the red, orange and yellow colours of the fruit will be enhanced, the freshness of the meat will be accentuated, intensifying the redness of the cuts. The cold white light will enhance the freshness of the fish, the soft, warm, and yellow light the tones and consistency of the cheeses. The golden colour of the bread and pastry products, including those freshly baked, will be accentuated with a simple touch of light.

Adjustable projector for discharge lamps. Optical assembly: die-cast aluminium. Luminaire housing: drawn aluminium. Louver: tempered glass with food-enhancement dichroic treatment. Reflector: super-pure oxidised and polished aluminium. Adjustable both vertically and horizontally. Complete with electronic ballast and Master Colour Elite lamp.

P04 - P06

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

CODE

DESCRIPTION

5302F

5402F

P04 MASTER Colour Elite MT (CDM-T) - 70W - G12 230V - 50Hz Colour: 01 - 02 - 18 IP 40 With 2 x 30° reflector

P06 MASTER Colour Elite MT (CDM-T) - 70W - G12 230V - 50Hz Colour: 01 - 02 - 18 IP 40 With 2 x 30° reflector

ACCESSORIES Adapter kit for ceiling installation (available colours: 01 - 02 - 18) Adapter kit for recessed adapter - ø 105 (available colours: 01 - 02 - 18)

658 659

658

659

Ø105

P04

P06

210

275

183

ø130

Size (mm)

160

217

160

01 white 02 black 18 grey NOTE

426

Adjustable projector for discharge lamps. Luminaire housing: die-cast aluminium. Louver: tempered glass with food-enhancement dichroic treatment. Reflector: super-pure oxidised and polished aluminium. Adjustable both vertically and horizontally. Complete with electronic ballast and Master Colour Elite lamp.

CODE 5101F

5103F

DESCRIPTION INDY MASTER Colour Elite MT (CDM-T) - 70W - G12 230V - 50Hz Colour: 01 - 02 - 18 IP 40 With 2 x 30째 reflector

MASTER Colour Elite MT (CDM-T) - 70W - G12 230V - 50Hz Colour: 01 - 02 - 18 IP 40 With 2 x 30째 reflector

5103

316 Size (mm)

295

5101

162

INDY

180

235

01 white 02 black 18 grey NOTE

430

Projector for discharge lamps. Luminaire housing: die-cast aluminium, steel sheet optical assembly. Louver: tempered glass with food-enhancement dichroic treatment. Reflector: super-pure oxidised and polished aluminium. Complete with electronic ballast and Master Colour Elite lamp.

CLOUD

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

CODE

MASTER Colour Elite MT (CDM-T) - 70W - G12 230V - 50Hz Colour: 01 - 02 - 18 IP 40

170

2819F

DESCRIPTION

200

Size (mm)

01 white 02 black 18 grey NOTE

432

210 290

High-bay luminaire for discharge lamps. Luminaire housing: drawn and die-cast aluminium Reflector: transparent acrylic or aluminium Louver: tempered glass with food-enhancement dichroic treatment. Complete with electronic ballast and Master Colour Elite lamp.

CODE

MINNI

DESCRIPTION

4000F

4005F

CODE

MINNI - SMALL VERSION Transparent acrylic reflector MASTER Colour Elite MT (CDM-T) - 70W - G12 230V - 50Hz Colour: 01 - 02 - 18 - 19 IP 40

Aluminium reflector MASTER Colour Elite MT (CDM-T) - 70W - G12 230V - 50Hz Colour: 01 - 02 - 18 - 19 IP 65

MINNI - LARGE VERSION Transparent acrylic reflector MASTER Colour Elite MT (CDM-T) - 70W - G12 230V - 50Hz Colour: 01 - 02 - 18 - 19 IP 40

Aluminium reflector MASTER Colour Elite MT (CDM-T) - 70W - G12 230V - 50Hz Colour: 01 - 02 - 18 - 19 IP 40

DESCRIPTION

4020F

4028F

ACCESSORIES Glass protective louver with hook system (for code 4005F) Acrylic protective louver with hook system (for code 4000F) Glass protective louver with hook system (for code 4020F) Acrylic protective louver with hook system (for code 4028F) Ceiling rose with steel cable and power supply cable (h. 2.80 m) Track installation kit

430 ø320 Size (mm)

560

Large Version

420

Small Version

580

522 526 524 528 915 917

ø316 ø450

ø416

01 white 14 chromium-plated 18 grey 19 anthracite grey NOTE

436

High-bay luminaire for discharge lamps. Luminaire housing: drawn and die-cast aluminium Louver: tempered glass with food-enhancement dichroic treatment. Complete with electronic ballast and Master Colour Elite lamp.

SAIL

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

CODE 2820F

DESCRIPTION MASTER Colour Elite MT (CDM-T) - 70W - G12 230V - 50Hz Colour: 18 - 19 IP 65 With 2 x 30° reflector

682

Electrical track mounting with cable Mechanical adapter with steel cable and electrical adapter with power supply cable (h 2800 mm) ø 190

High-bay mounting Kit for high-bay installation including: ceiling rose with power supply cable (h 2800 mm), steel cable with height adjustment device Colour: 19 anthracite grey

336

ACCESSORIES 683

Size (mm)

18 grey 19 anthracite grey NOTE

440

Adjustable recessed luminaire for discharge lamps. Luminaire housing: die-cast aluminium. Louver: tempered glass with food-enhancement dichroic treatment. Complete with electronic ballast and Master Colour Elite lamp.

SCARICA

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

CODE

MASTER Colour Elite (CDM-T) - 70W - G12 - MT 230V - 50Hz Colour: 01 - 18 IP 44

165

9100F

DESCRIPTION

Ø210 Ø190 Size (mm)

01 white 18 grey NOTE

444

SCARICA

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

CODE

MASTER Colour Elite MT (CDM-T) - 70W - G12 230V - 50Hz Colour: 01 - 18 IP 43 With 2 x 30° reflector

156

9035F

DESCRIPTION

360°

60° Ø196 Ø185 Size (mm)

01 white 18 grey NOTE

448

OUTDOOR

Outline a direction, Display a space, Decorate in order to dream.

Quattrobiâ&#x20AC;&#x2122;s outdoor lights are footsteps to be followed, choreography to be admired, safe paths offering security and awe. Never get lost in the night and never miss a detail of beauty, a glimmer of illusion. Different shapes and technologies, to clearly see a world constantly changing before our eyes.

Book Round HILL Square HILL Alias Traccia Metro Outdoor Sail Nut Dinamis Phoenix Iky

BOOK

Technical specifications With its compact structure, made of resistant and highquality materials, the luminaire has an IP 65 protection class and can be installed in any kind of indoor or outdoor environment. The projector housing is entirely made of die-cast aluminium, with perimeter louvers of tempered glass and gaskets of silicone material, which make it absolutely impervious both to liquids and solids. The luminaire mounting is particularly attractive due to its ease of installation. First of all the base (accommodating the power supply unit) is fixed, then the outer cover is applied and fixed by means of two totally recessed side screws. The luminaire flexibility of use is expanded by the possibility of creating polemounted variants. Made of coated extruded aluminium, these poles are available in three different heights, 50 mm, 225 mm and 450 mm, with in-ground recessed plate fixing. Both the luminaire and the poles, with UV-stabilized epoxy polyester coat finish, are available in three colours: grey, anthracite grey and white. Thanks to its geometrically clean design, Book, a projector for outdoor and indoor applications, provides effective or discreet lighting for architectural constructions, facades, urban spaces or areas. This typically wall-mounted luminaire is characterized by compact shape, essential and minimalist design that is minimally obtrusive and adapts to any architectural context with its unobtrusive presence, because emphasis is here placed on lighting functionality, rather than decoration or formal plays.

Optical components and light sources The luminaires of the Book series use two different types of lamps, mainly depending on their specific application. 20 W metal-halide lamps with PGJ5 fitting and W 18 compact fluorescent lamps with 2G10 fitting. The special optical components provide soft and diffuse, asymmetrical, and light-blade light beams.

DISCHARGE LAMPS MT (CDM-TC) - PGJ5

20W

FLUORESCENT LAMPS FSMH (T/E) - 2G10

458

18W

Wall-washer luminaire with single or double emission and light cones of different widths.

BOOK

DESIGN - STEFANO DALLâ&#x20AC;&#x2122;OSSO

Structural features Installation: wall-mounted, floor-mounted, basemounted, with single, double or multiple emission Luminaire housing: die-cast aluminium Poles for ground-fixing: extruded aluminium profile with UV-stabilized epoxy polyester coat finish Optical components: fixed in super-pure oxidized and polished aluminium, asymmetrical and light-blade Louvers: tempered glass, sandblasted tempered glass Light sources: metal-halide discharge and fluorescent compact lamps Standard finishing: grey, anthracite grey Protection class: IP65 Insulation class: I Power supply: 230V - 50Hz

459

Wall-mounted and floor-mounted luminaire for discharge lamps. Coated die-cast aluminium structure. Protection louvers in tempered glass. Complete with electronic ballast.

DESCRIPTION

2850

Single emission with narrow light beam MT (CDM-TC) - 20W -PGJ5 230V - 50Hz Colour: 01 - 18 - 19 - 21 IP 65 Electronic ballast

Size (mm)

170

CODE

225

Double emission with narrow light beam MT (CDM-TC) - 20W -PGJ5 230V - 50Hz Colour: 01 - 18 - 19 - 21 IP 65 Electronic ballast

170

2851

225

01 white 18 grey 19 anthracite grey 21 copper NOTE

460

Wall-mounted and floor-mounted luminaire for discharge lamps. Coated die-cast aluminium structure. Protection louvers in tempered glass. Complete with electronic ballast.

BOOK

DESIGN - STEFANO DALLâ&#x20AC;&#x2122;OSSO

DESCRIPTION

2854

Single emission with wide light beam MT (CDM-TC) - 20W -PGJ5 230V - 50Hz Colour: 01 - 18 - 19 - 21 IP 65 Electronic ballast

Size (mm)

170

CODE

225

Double emission with wide light beam MT (CDM-TC) - 20W -PGJ5 230V - 50Hz Colour: 01 - 18 - 19 - 21 IP 65 Electronic ballast

170

2853

2852

Double emission with narrow light beam and wide light beam MT (CDM-TC) - 20W -PGJ5 230V - 50Hz Colour: 01 - 18 - 19 - 21 IP 65 Electronic ballast

170

225

170

Single emission with asymmetrical optical component MT (CDM-TC) - 20W -PGJ5 230V - 50Hz Colour: 01 - 18 - 19 - 21 IP 65 Electronic ballast

225 84

2855

01 white 18 grey 19 anthracite grey 21 copper NOTE

461

Wall-mounted and floor-mounted luminaire for compact fluorescent lamps. Coated die-cast aluminium structure. Protection louvers in tempered glass. Complete with electronic ballast.

DESCRIPTION

2860

Single emission FSMH (T/E) - 18W - 2G10 230V - 50Hz Colour: 01 - 18 - 19 - 21 IP 65 Electronic ballast

Size (mm)

170

CODE

225

Double emission FSMH (T/E) - 18W - 2G10 230V - 50Hz Colour: 01 - 18 - 19 - 21 IP 65 Electronic ballast

170

2861

225

Multiple emission FSMH (T/E) - 18W - 2G10 230V - 50Hz Colour: 01 - 18 - 19 - 21 IP 65 Electronic ballast

170

2862

225

01 white 18 grey 19 anthracite grey 21 copper NOTE

462

BOOK

DESIGN - STEFANO DALL’OSSO

DESCRIPTION

864

Base for ground mounting – Height: 50 mm Extruded aluminium with epoxy polyester coat finish Colour: 01 - 18 - 19 -21

Size (mm)

CODE

170

The figure shows the pole complete with luminaire. The luminaire must always be ordered separately.

Base for ground mounting – Height: 225 mm Extruded aluminium with epoxy polyester coat finish Colour: 01 - 18 - 19 - 21 225

862

The figure shows the pole complete with luminaire. The luminaire must always be ordered separately. 84

863

170

Base for ground mounting – Height: 450 mm Extruded aluminium with epoxy polyester coat finish Colour: 01 - 18 - 19 - 21

450

The figure shows the pole complete with luminaire. The luminaire must always be ordered separately.

84 Recessed plate with tie-rods for fixing to the ground Hot-galvanised steel

866

Backplate for fixing to concrete surfaces

150

861

170

165

01 white 18 grey 19 anthracite grey 21 copper NOTE

463

ROUND HILL - SQUARE HILL Technical specifications Round Hill and Square Hill are solid, ground-recessed luminaires, highly resistant to mechanical shocks IK08 and weatherproof. Static load resistance 2000 kg. Their corrosion – and deterioration – resistant structure is made up of a main body and a recessed box, both in die-cast aluminium. The outer frame, round for Round Hill (diameter 85, 140, 251 mm) or square for Square Hill (side 85x85, 140x140, 251x251 mm) is made of stainless steel and fitted with highly resistant protective tempered glass, either 10 mm or 15 mm thick. Silicone gaskets and stainless steel screws allow to reach an IP 67 - IP 65 protection class. Some models are provided with adjustable, symmetrical, asymmetrical and light blade optical components, for full adjustability of the light sources.

Place the recessed box on a draining ground (min. 200 mm).

Mini Round HILL - Ø85 mm

466

Structural features Installation: in-ground recessed Luminaire housing: die-cast aluminium and stainless steel outer ring Louver: tempered glass, 10 mm and 15 mm thick Optical components: fixed and adjustable, symmetrical, asymmetrical, light blade Light sources: very low voltage halogen lamps, mains voltage lamps, discharge lamps, fluorescent lamps Standard finishing: stainless steel Protection class: IP67 - IP65 Insulation class: I Power supply: 230V - 50Hz - 12V All luminaires come with 400 mm power supply cable.

Connect the power supply cable and secure the luminaire to the recessed box.

Round HILL - Ø140 mm

Once secured, the outer ring should be perfectly tight with the outer surface.

Maxi Round HILL - Ø251 mm

ROUND HILL SQUARE HILL DESIGN - QUATTROBI TECHNICAL DEPARTMENT

Optical components and light sources Multiple optical components and a wide choice of light sources, suitable for various uses: 20W very low voltage lamps, 35W mains voltage halogen lamps, 20W and 35W discharge lamps, 18W compact fluorescent lamps.

C0 B

DISCHARGE LAMPS MT (CDM-T) - PGJ5

20W

MT (CDM-T) - G12

35W

B 0.5 1 2

C 0.8 2 3.5

C0 0 0.3 1.5

VERY LOW VOLTAGE HALOGEN LAMPS (12V) HRGI - GU4 max 20W HRGI - GU5.3 max 20W MAINS VOLTAGE HALOGEN LAMPS

Emax 750 246 50

Emed 320 148 35

U 0.09 0.2 0.8

max 35W

HSGI - GZ10 COMPACT FLUORESCENT LAMPS FSQH (TC-D) - GX24q-2

18W C0 B

FLUORESCENT FB - GX53

6W B 0.5 1 2

Front louvers of different thickness. For Mini Round Hill, Mini Square Hill, Round Hill and Square Hill 10 mm; Maxi Round Hill e Maxi Square Hill 15 mm.

Mini Square HILL - 85x85 mm

Square HILL - 140x140 mm

C 1 2.3 5

C0 0.1 0.8 1.5

Emax 1026 173 49

Emed 615 75 25

U 0.04 0.33 0.8

Maxi Square Hill Asymmetrical optical component MT (CDM-T) 35W - G12 Vertical projection B - Distance between luminaire and vertical plane C - Maximum projection height CO - Projection starting height

Maxi Round Hill Asymmetrical optical component MT (CDM-T) - 35W - G12 Vertical projection B - Distance between luminaire and vertical plane C - Maximum projection height CO - Projection starting height

The bottom of the recessed box in perforated sheet prevents water accumulation.

Maxi Square HILL - 251x251 mm

467

Grounde-recessed luminaire for very low voltage halogen lamps (12V). Die-cast coated aluminium structure. Stainless steel outer ring. Protection louver in tempered glass (10 mm). Supplied with H05RN-F cable.

CODE

DESCRIPTION Mini Round Hill HRGI - 20W max - 12V - GU4 Colour: stainless steel IP 67 - IP 65 IK08 mechanical shocks 2000 Kg static load Supplied with H05RN-F cable 2x1 mm2 Ballast to be ordered separately

1400

T 125°C g

Electronic ballast 230-240V - 50/60Hz 35 - 105W IP 68 H07RN-F cable 2x1 mm2

415

The ballast cannot be placed into the recessed box with the luminaire. A remote box must be provided instead.

ACCESSORIES Electrical series connection of multiple luminaires - IP 68 Recessed box in coated die-cast aluminium

949 991

Ø85

991

Size (mm)

120

106

Ø80

170

415

468

101

949

1000

Ground-recessed luminaire for very low voltage halogen lamps (12V). Die-cast coated aluminium structure. Stainless steel outer ring. Protection louver in tempered glass (10 mm). Supplied with H05RN-F cable.

ROUND HILL SQUARE HILL DESIGN - QUATTROBI TECHNICAL DEPARTMENT

CODE

DESCRIPTION Mini Square Hill HRGI - 20W max - 12V - GU4 Colour: stainless steel IP 67 - IP 65 IK08 mechanical shocks 2000 Kg static load Supplied with H05RN-F cable 2x1 mm2 Ballast to be ordered separately

1420

T 120째C g

Electronic ballast 230-240V - 50/60Hz 35 - 105W IP 68 H07RN-F cable 2x1 mm2

415

The ballast cannot be placed into the recessed box with the luminaire. A remote box must be provided instead.

ACCESSORIES 85

Electrical series connection of multiple luminaires - IP 68 Recessed box in coated die-cast aluminium

949 992

Size (mm)

120

106

992

170

949 101

415

1000

469

Ground-recessed luminaire for discharge lamps, very low voltage halogen lamps (12V) and mains voltage halogen lamps. Die-cast coated aluminium structure. Stainless steel outer ring. Protection louver in tempered glass (10 mm). Supplied with H07RN-F cable.

CODE 1440

DESCRIPTION Round Hill - Fixed optical component MT (CDM-T) - 20W - PGJ5 - 230V - 50Hz Colour: stainless steel - IP 67 - IP 65 IK08 mechanical shocks - 2000 Kg static load Supplied with H07RN-F cable 2x1 mm2 Equipped with electronic ballast Round Hill - Adjustable optical component HRGI - 20W max - 12V - GU5.3 Colour: stainless steel - IP 67 - IP 65 IK08 mechanical shocks - 2000 Kg static load Supplied with H05RN-F cable 2x1 mm2 Ballast to be ordered separately

1441

1442

1443

Round Hill - Adjustable optical component HSGI - 35W max - GZ10 - 250V max Colour: stainless steel - IP 67 - IP 65 IK08 mechanical shocks - 2000 Kg static load Supplied with H07RN-F cable 2x1 mm2 Round Hill - Fixed optical component FB - 6W - GX53 - 230V - 50 Hz Colour: stainless steel - IP 67 - IP 65 IK08 mechanical shocks - 2000 Kg static load Supplied with H07RN-F cable 2x1 mm2

127

T 110°C g

T 75°C g

T 135°C g

T 49°C

Electronic ballast 230-240V - 50/60Hz 35 - 105W IP 68 H07RN-F cable 2x1 mm2

Ø140

140

415

The ballast cannot be placed into the recessed box with the luminaire. A remote box must be provided instead.

Size (mm)

ACCESSORIES Luminaire connection - IP 68 Electrical series connection of multiple luminaires - IP 68 Recessed box in coated die-cast aluminium

945 944 993

127

415

993

180°

Ø135

90°

81 1000

116

166

101

Ø135

H(m) D1(m) D2(m) 90°

0.35 0.35 192

1500

0.71 0.71 154

812

2000

1.06 1.06 119

375

1000

2500 3000

MT (CDM-T) - 20W

274

944

274

115

945

115

470

Lux Lux (med) (max)

192

1.41 1.41

215

1.76 1.76

140

ROUND HILL SQUARE HILL DESIGN - QUATTROBI TECHNICAL DEPARTMENT

1460

DESCRIPTION Square Hill - Fixed optical components MT (CDM-T) - 20W - PGJ5 - 230V - 50Hz Colour: stainless steel - IP 67 - IP 65 IK08 mechanical shocks - 2000 Kg static load Supplied with H07RN-F cable 2x1 mm2 Equipped with electronic ballast Square Hill - Adjustable optical components HRGI - 20W max - 12V - GU5.3 Colour: stainless steel - IP 67 - IP 65 IK08 mechanical shocks - 2000 Kg static load Supplied with H05RN-F cable 2x1 mm2 Ballast to be ordered separately

1461

1462

1463

Square Hill - Adjustable optical components HSGI - 35W max - GZ10 - 250V max Colour: stainless steel - IP 67 - IP 65 IK08 mechanical shocks - 2000 Kg static load Supplied with H07RN-F cable 2x1 mm2 Square Hill - Fixed optical components FB - 6W - GX53 - 230V - 50 Hz Colour: stainless steel - IP 67 - IP 65 IK08 mechanical shocks - 2000 Kg static load Supplied with H07RN-F cable 2x1 mm2

T 90째C F

T 69째C F

T 120째C F

T 49째C 140

140

Electronic ballast 230-240V - 50/60Hz 35 - 105W - IP 68 H07RN-F cable 2x1 mm2

415

140

CODE

The ballast cannot be placed into the recessed box with the luminaire. A remote box must be provided instead.

Size (mm)

ACCESSORIES Luminaire connection - IP 68 Electrical series connection of multiple luminaires - IP 68 Recessed box in coated die-cast aluminium

945 944 994

415

994 135

81 1000

116

274

944 85

274

115

945 30

166

101

135

115

471

Ground-recessed luminaire for discharge lamps and compact fluorescent lamps. Coated die-cast aluminium structure. Stainless steel outer ring. Protection louver in tempered glass (15 mm). Complete with power-factor-corrected electromechanical ballast. Complete with electrical device for single or series connection. M24 cable clamp for H07RN-F cable.

CODE 1480

DESCRIPTION Maxi Round Hill - Asymmetrical optical component MT (CDM-T) - 35W - G12 - 230V - 50Hz Colour: stainless steel - IP 67 - IP 65 F IK08 mechanical shocks 2000 Kg static load Supplied with H07RN-F cable 3x1 mm2 Complete with power-factor-corrected electromechanical ballast

128 g

T 85°C

1481

Maxi Round Hill - Symmetrical optical component MT (CDM-T) - 35W - G12 - 230V - 50Hz Colour: stainless steel - IP 67 - IP 65 F IK08 mechanical shocks 2000 Kg static load Supplied with H07RN-F cable 3x1 mm2 Complete with power-factor-corrected electromechanical ballast

129 g

T 75°C

1482

Maxi Round Hill - Light blade optical component MT (CDM-T) - 35W - G12 - 230V - 50Hz F Colour: stainless steel - IP 67 - IP 65 IK08 mechanical shocks 2000 Kg static load Supplied with H07RN-F cable 3x1 mm2 Complete with power-factor-corrected electromechanical ballast

T 75°C

1483

Maxi Round Hill - Symmetrical optical component FSQH (TC-D) - 18W - GX24q-2 - 230V - 50Hz Colour: stainless steel - IP 67 - IP 65 IK08 mechanical shocks 2000 Kg static load Supplied with H07RN-F cable 3x1 mm2 Electronic ballast

T 60°C

ACCESSORIES 995

Recessed box in coated die-cast aluminium

Ø245

128 180° 90°

90°

320

216

460

Ø251

640

MT (CDM-T) - 35W

180

129 180° 90°

90°

2000

Ø340

3000

472

MT (CDM-T) - 35W

Size (mm)

ROUND HILL SQUARE HILL DESIGN - QUATTROBI TECHNICAL DEPARTMENT

CODE 1490

DESCRIPTION Maxi Square Hill - Asymmetrical optical component MT (CDM-T) - 35W - G12 - 230V - 50Hz Colour: stainless steel - IP 67 - IP 65 IK08 mechanical shocks 2000 Kg static load Supplied with H07RN-F cable 3x1 mm2 Complete with power-factor-corrected electromechanical ballast

T 85째C

1491

Maxi Square Hill - Symmetrical optical component MT (CDM-T) - 35W - G12 - 230V - 50Hz Colour: stainless steel - IP 67 - IP 65 IK08 mechanical shocks 2000 Kg static load Supplied with H07RN-F cable 3x1 mm2 Complete with power-factor-corrected electromechanical ballast

T 75째C

1492

Square Hill - Light blade optical component MT (CDM-T) - 35W - G12 - 230V - 50Hz Colour: stainless steel - IP 67 - IP 65 IK08 mechanical shocks 2000 Kg static load Supplied with H07RN-F cable 3x1 mm2 Complete with power-factor-corrected electromechanical ballast

T 75째C

1493

Maxi Square Hill - Symmetrical optical component FSQH (TC-D) - 18W - GX24q-2 - 230V - 50Hz Colour: stainless steel - IP 67 - IP 65 IK08 mechanical shocks 2000 Kg static load Supplied with H07RN-F cable 3x1 mm2 Electronic ballast

T 60째C

ACCESSORIES Recessed box in coated die-cast aluminium 251

996

245

216

245

340

180

251

Size (mm)

340

473

ALIAS

ALIAS A signal in residential areas to enhance with soft and discreet light streets, building perimeters, and outdoor and indoor walkways. Technical specifications Designed for outdoor applications, Alias is a new series of recessed luminaires that meet different lighting requirements depending on their installation, including urban design, pedestrian paths and walkways, or as a decoration element through the emission of soft light. Shock-resistant and corrosion- and weather-proof, the structure of these luminaires consists of a main housing made of polycarbonate and of a stainless steel or diecast aluminium louver, fitted with high-resistance protection tempered glass, 10 mm thick. Silicone material gaskets and stainless steel screws ensure IP67 - IP65 protection class and class II insulation, which guarantee maximum safety. The round outer frame has 140 mm diameter and is available in the full-light version or with protection eyelid cover. The recess, contained in only 65 mm, allows these luminaires to be mounted also in walls or false ceilings with small thickness or depth. The optical components are fixed and house LED (see section) and fluorescent light sources. The outer rings made of stainless steel or die-cast aluminium with UV-stabilized epoxy polyester coat finish are available in two colours: grey and anthracite grey.

MAINS VOLTAGE FLUORESCENT LAMPS GX53 - FB GX53 - MICROLYNK LED

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

Optical components and light sources A single optical component has been designed for this type of luminaire, both in the full-light version and in the version with eyelid cover, and uses fluorescent light sources with built-in 6 W ballast with GX53 fitting. Structural features Installation: wall, floor or ceiling-mounting Luminaire housing: polycarbonate and outer ring of stainless steel or die-cast aluminium with epoxy polyester coat finish. Silicone rubber gasket Louvers: tempered glass 10 mm thick Light sources: fluorescent Standard finishing: stainless steel, grey, anthracite grey Protection class: IP 67 - IP 65 Insulation class: II Power supply: 230V - 50Hz

Only 65 mm high, these luminaires can be installed also in shallow walls or false ceilings.

1,5W

Once secured, the outer ring should be perfectly tight with the outer surface.

475

Wall-mounted, floor-mounted and false ceiling-mounted recessed luminaire for fluorescent lamps. Polycarbonate structure. Stainless steel or die-cast aluminium outer ring. Protection louver in tempered glass (10 mm).

CODE

DESCRIPTION

1450

Stainless steel outer ring version MICRO-LYNX F - GX53 - FB - 6W 230V - 50Hz Colour: stainless steel IP 67 - IP 65

1451

Die-cast aluminium outer ring version MICRO-LYNX F - GX53 - FB - 6W 230V - 50Hz Colour: 18 - 19 -21 IP 67 - IP 65

1450 - 1451

997

ACCESSORIES Plastic recessed box Recessed mounting installation kit

140 67

126

Size (mm)

stainless steel 18 grey 19 anthracite grey 21 copper NOTE

476

997 939

Wall-mounted recessed luminaire for fluorescent lamps. Polycarbonate structure. Die-cast aluminium outer ring. Protection louver in tempered glass (10 mm).

ALIAS

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

CODE

DESCRIPTION

1452

Die-cast aluminium eyelid cover version MICRO-LYNX F - GX53 - FB - 6W 230V - 50Hz Colour: 18 - 19 - 21 IP 67 - IP 65

1452

997

ACCESSORIES Plastic recessed box Recessed mounting installation kit

140

126 67

997 939

Size (mm)

18 grey 19 anthracite grey 21 copper NOTE

477

TRACCIA

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

Technical specifications Traccia and Traccia Light housing consists of a profile in anodised extruded aluminium. Both ends are closed with anodised aluminium caps, which together with silicone rubber gaskets and stainless steel screws ensure IP67 protection class. The louver is made of tempered glass (8 mm thick for the recessed type and 5 mm this for the Light model). The reflector is made of oxidised and polished superpure aluminium; it can be either symmetrical and asymmetrical and uses T5 energy saving linear fluorescent lamps. Flush mounting on the floor or wall can be performed using a galvanised sheet recessed box. The luminaires come in four different lengths: 690, 990, 1290, and 1590 mm. All luminaires feature an electronic ballast inside the lamp housing. Wall, ceiling and high-bay mounting of Traccia Light is provided by a range of accessories for quick installation and streamlined future maintenance. All luminaires â&#x20AC;&#x201C; with module length of 602, 902, 1202, and 1502 mm, come complete with an electronic ballast.

Optical components and light sources T5 linear fluorescent lamps with 14-21-28-35 W G5 power. FLUORESCENT LAMPS FDH (T) - G5 FDH (T) - G5 FDH (T) - G5 FDH (T) - G5

Symmetrical optical component

IK code

Energy (J)

(0)

0,15

0,2

0,35

0,5

0,7

Mass (kg)

0,2

0,5

1,7

Height (mm)

100

175

250

350

200

400

295

200

400

14W 21W 28W 35W

Asymmetrical optical component

IK code/impact energy relation table

479

The recessed type can support static loads of up to 1000 kg, and mechanical shocks (10J - 5 kg). - 200 mm.

Traccia comes in two versions: with symmetrical optical component for uniform light distribution and with asymmetrical optical component for direct light.

480

Structural features Installation: recessed, wall-mounted, ceiling-mounted, suspended, high-bay Luminaire housing: anodised extruded aluminium profile Louver: tempered glass, thickness 8 mm (recessed type) and 5 mm (Light type) Reflector: 99.9% super-pure oxidised and polished aluminium Optical component: symmetrical and asymmetrical Light sources: T5 linear fluorescent lamps Accessories: recessed box, coloured filters (yellow, red, blue) and anti-glare shields, supports and brackets for wall-mounting, cables with base for high-bay installation Finishing: anodised natural Protection class: IP67 Protection rating against mechanical shocks: IK09 Insulation class: I Power supply: 230V - 50Hz

Hot-galvanised steel recessed box for installation on the floor.

TRACCIA

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

Traccia Light is the wall, ceiling and high-bay mounting type of this luminaire family, stylistically consistent and suitable for specific installation needs.

High-bay installation system.

Wall mounting system.

Ceiling mounting system

Ceiling rose with power supply cable.

Traccia recessed luminaires are complemented with a RGB technology-based type which changes colours through colour synthesis. The light sources are fluorescent lamps for light intensity regulation of colours red, green and blue. Colours can be projected separately or mixed. Not only are the colour light effects a decorative solution to add value to contexts, but also a real trend in modern settings and furnishings, to create a relaxed background atmosphere in public places, commercial and multi-task centres.

The Traccia system meets different installation needs, like wall and highbay mounting solutions.

Recessed luminaire with RGB technology.

481

Recessed mounting module for T5 linear fluorescent lamps. Equipped with electronic ballast. M20 cable clamp, suitable for H07R-F cable.

CODE

DESCRIPTION

2630 2631

Symmetrical optical component - FDH (T) - 14W - G5 Asymmetrical optical component - FDH (T) - 14W - G5 230V - 50Hz - Colour: 33 - IP 67 - IK09 - Kg 3.00 Length of module: 690/614 mm

2632 2633

Symmetrical optical component - FDH (T) - 21W - G5 Asymmetrical optical component - FDH (T) - 21W - G5 230V - 50Hz - Colour: 33 - IP 67 - IK09 - Kg 4.00 Length of module: 990/914 mm

2634 2635

Symmetrical optical component - FDH (T) - 28W - G5 Asymmetrical optical component - FDH (T) - 28W - G5 230V - 50Hz - Colour: 33 - IP 67 - IK09 - Kg 5.00 Length of module: 1290/1214 mm

2636 2637

Symmetrical optical component - FDH (T) - 35W - G5 Asymmetrical optical component - FDH (T) - 35W - G5 230V - 50Hz - Colour: 33 - IP 67 - IK09 - Kg 6.00 Length of module: 1590/1514 mm

ACCESSORIES

981 982 983

985 986 987 988

Galvanised steel recessed box For code 2630 - 2631 Length 804 mm - Width 130 mm - Height 120 mm For code 2632 - 2633 Length 1104 mm - Width 130 mm - Height 120 mm For code 2634 - 2635 Length 1404 mm - Width 130 mm - Height 120 mm For code 2636 - 2637 Length 1704 mm - Width 130 mm - Height 120 mm Galvanised steel structure for false-ceilings For code 2630 - 2631 Length 780 mm - Width 170 mm - Recessed hole 616 x 86 mm For code 2632 - 2633 Length 1080 mm - Width 170 mm - Recessed hole 916 x 86 mm For code 2634 - 2635 Length 1380 mm - Width 170 mm - Recessed hole 1216 x 86 mm For code 2636 - 2637 Length 1680 mm - Width 170 mm - Recessed hole 1516 x 86 mm

940 941 942 943

Anti-glare shields For code 2630 - 2631 For code 2632 - 2633 For code 2634 - 2635 For code 2636 - 2637

581 582 583 584

Yellow, red, blue, sand-coloured filters GI - R - BL - SA - For code 2630 - 2631 GI - R - BL - SA - For code 2632 - 2633 GI - R - BL - SA - For code 2634 - 2635 GI - R - BL - SA - For code 2636 - 2637

944

Series connection device IP68

Recessed box

Frame

Light shields

110

B 614 914 1214 1514

Size (mm)

230V - 50Hz Series connection

Filters

33 anodised natural GI yellow R red Bl blue SA sand-coloured NOTE

484

A 690 990 1290 1590

980

module length 2630 - 2631 2632 - 2633 2634 - 2635 2636 - 2637

Recessed mounting module for T5 linear fluorescent lamps, with RGB technology. Complete with electronic dimmable ballasts. M20 cable clamp, suitable for H07R-F cable.

TRACCIA

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

CODE

DESCRIPTION Symmetrical optical component FDH (T) - 3 x 35W - G5 230V - 50Hz Colour: 33 IP 67 - IK09 - Kg 6.00 Length of module: 1590/1514 mm Dimmerable 1-10V Adjustment unit not included

2636 RGB

2636 RGB DALI Symmetrical optical component FDH (T) - 3 x 35W - G5 230V - 50Hz Colour: 33 IP 67 - IK09 - Kg 6.00 Length of module: 1590/1514 mm Dimmerable DALI Adjustment unit not included

ACCESSORIES Galvanised steel recessed box For code 2636 - 2637 Length 1704 mm - Width 130 mm - Height 120 mm

988

Galvanised steel structure for false-ceilings For code 2636 - 2637 Length 1680 mm - Width 170 mm - Recessed hole 1516 x 86 mm

A 1590 1590

110

B 1514 1514

983

module length 2636 RGB 2636 RGB DALI

Size (mm)

Recessed box

Frame

33 anodised natural NOTE

485

High-bay and wall-mounting module for T5 linear fluorescent lamps. Equipped with electronic ballast. M16 cable clamp, suitable for H07RN-F cable.

TRACCIA

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

CODE

DESCRIPTION

6010 6011

Symmetrical optical component - FDH (T) - 14W - G5 Asymmetrical optical component - FDH (T) - 14W - G5 230V - 50Hz - Colour: 33 - IP 67 - Kg 2.20 Length of module 602 mm

6012 6013

Symmetrical optical component - FDH (T) - 21W - G5 Asymmetrical optical component - FDH (T) - 21W - G5 230V - 50Hz - Colour: 33 - IP 67 - Kg 3.20 Length of module 902 mm

6014 6015

Symmetrical optical component - FDH (T) - 28W - G5 Asymmetrical optical component - FDH (T) - 28W - G5 230V - 50Hz - Colour: 33 - IP 67 - Kg 4.20 Length of module 1202 mm

6016 6017

Symmetrical optical component - FDH (T) - 35W - G5 Asymmetrical optical component - FDH (T) - 35W - G5 230V - 50Hz - Colour: 33 - IP 67 - Kg 5.20 Length of module 1502 mm

ACCESSORIES Anti-glare shields For code 6010 - 6011 For code 6012 - 6013 For code 6014 - 6015 For code 6016 - 6017

581 582 583 584

Yellow, red, blue, sand-coloured filters GI - R - BL - SA - For code 6010 - 6011 GI - R - BL - SA - For code 6012 - 6013 GI - R - BL - SA - For code 6014 - 6015 GI - R - BL - SA - For code 6016 - 6017

840

High-bay mounting kit 2 steel supporting cables with jack Power supply cable with ceiling rose (length of cables: 2100 mm)

841 984 842

Brackets 1 bracket for wall mounting 2 adjustable bracket for wall mounting 2 brackets for ceiling mounting

Anti-glare shields

840

842

Filters

841

984

Size (mm)

33 anodised natural GI yellow R red Bl blue SA sand-coloured NOTE

486

A 602 902 1202 1502

88.5

940 941 942 943

module length 6010 - 6011 6012 - 6013 6014 - 6015 6016 - 6017

METRO OUTDOOR Metro Outdoor is composed of aluminium modules that can be used separately or linked with one another to build a single lighting solution that can reach several metres in length. Together with Traccia Light, the series is yet another step forward to expand the wide range of Quattrobi proposals for minimal luminaires, in which lighting prevails on decoration and appearance. The modules of varying length can accommodate one or two T5 linear fluorescent lamps.

The Metro Outdoor system supports varied installation options, i.e. high-bay, wall and ceiling mounting.

Technical specifications The body of the base module is composed of a coat finish aluminium profile with aluminium ends, silicone gaskets and stainless steel screws. These features provide IP54 protection, in compliance with outdoor installation requirements. In the wall, ceiling and highbay versions, Metro Outdoor provides installation solutions with modules having a fixed length of 585, 885, 1185, 1485, 2290 and 2890 mm. Special systembased solutions adjustable to paths of varying lengths can also be implemented. All the luminaires of this series accommodate T5 linear fluorescent light sources for low energy consumption, protected by a white opaline polycarbonate louver. They include an electronic power supply (inside the single luminaires) and are suitable for online connection of multiple modules. They can be installed by means of a set of accessories for quick fixing.

Optical components and light sources Light sources include T5 low-consumption fluorescent linear tubes, with 14, 21, 28, 35 W and G5 connection.

FLUORESCENT LAMPS FDH (T) - G5 FDH (T) - G5 FDH (T) - G5 FDH (T) - G5

Silicone gaskets and a front louver provide IP54 protection, suitable for installation outside of buildings or under severe environmental conditions, such as dust or humidity.

Protection class in the recessed type.

IP40

IP54 490

14W 21W 28W 35W

IP54 protection is guaranteed only with louver pointing downwards.

METRO OUTDOOR

DESIGN - STEFANO DALLâ&#x20AC;&#x2122;OSSO

Custom manufacturing Metro Outdoor can be specifically drawn for custom applications, with varying lengths and possibility of installing a different number of light sources. Bars can be drawn in the required length, up to 5 metres for each module. Quattrobi provides custom combinations, on specific request, also with LED light sources.

Module

Silicone gasket

Gasket

Side cap

Diffuser

Also for line installations in a single frame, replacing a lamp does not require dismounting the luminaire, as you simply need to remove the front louver in the corresponding area. Insert the tip of a screwdriver between the edge and louver in the middle of the module (1), then gently lever downwards (2). The louver will be gradually released.

Maximum light coverage of the louver.

Double power input.

Ceiling rose with and power supply cable.

High-bay installation system.

Ceiling mounting system.

491

Wall-mounting, high-bay and ceiling-mounting module for T5 linear fluorescent lamps. With electronic power supply and opaline polycarbonate louver.

CODICE 8000

8002

8004

8006

8040

8041

DESCRIZIONE Module length 585 mm FDH (T) - 14W - G5 230V - 50Hz Colour: 01 - 18 Side caps to be ordered separately Code 847 or 849 Module length 885 mm FDH (T) - 21W - G5 230V - 50Hz Colour: 01 - 18 Side caps to be ordered separately Code 847 or 849 Module length 1185 mm FDH (T) - 28W - G5 230V - 50Hz Colour: 01 - 18 Side caps to be ordered separately Code 847 or 849 Module length 1485 mm FDH (T) - 35W - G5 230V - 50Hz Colour: 01 - 18 Side caps to be ordered separately Code 847 or 849

g Completo di guarnizione

Module length 2290 mm FDH (T) - 2 x 28W - G5 230V - 50Hz Colour: 01 - 18 Side caps to be ordered separately Code 847 or 849

Module length 2890 mm FDH (T) - 2 x 35W - G5 230V - 50Hz Colour: 01 - 18 Side caps to be ordered separately Code 847 or 849

8000 585

8002 885

8004 1185

8006 1485

8040 2290

8041 2890

840

High-bay mounting kit 2 steel supporting cables with quick fix system Power supply cable with ceiling rose (length of cables: 2500 mm)

842

Ceiling mounting brackets 2 ceiling mounting brackets

843

Wall mounting brackets 1 wall mounting bracket - L 500 mm

845

Angle connection module

ACCESSORI

Size (mm)

01 white 18 grey NOTE

492

Complementary accessories.

METRO OUTDOOR ACCESSORIES DESIGN - STEFANO DALLâ&#x20AC;&#x2122;OSSO

CODE

DESCRIPTION

847

Side caps fitted with gaskets For code 8000 - 8002 - 8004 - 8006 - 8040 - 8041 8012 - 8013 - 8044 - 8045

849

Module connection kit with gaskets For code 8000 - 8002 - 8004 - 8006 - 8040 - 8041 8012 - 8013 - 8044 - 8045

SAIL

A strongly technological-looking projector, resulting from a reconsideration of the classical industrial high-bay luminaires, enriched with innovative functions and installation solutions. Technical specifications Sail (336 mm length and 190 mm diameter) is composed of two main elements in drawn aluminium, closed at both ends. The front part houses the optical components, whereas the other accommodates the ballast. The luminaire is fitted with a front louver in highly resistant tempered glass. The reflector is made of super-pure oxidized and polished aluminium. The gaskets in silicone material make this luminaire resistant both to liquid and solid elements. Its special structural configuration ensures a high degree of protection - IP 65 - which means that the luminaire is weatherproof and resistant even to particularly difficult environmental conditions. All accessory closing and hooking screws are of stainless steel. The luminaire flexibility of use, ideal both for indoor and outdoor spaces, is expanded by the possibility of varying the installation solutions: ceiling, wall and pole. The wall-mounted type develops direct or indirect light through the use of reflecting panel in fibreglass reinforced resin. On pole, different solutions can be provided, by mounting one, two or three in-line projectors. Sail uses 70W and 150W metal halide discharge lamps and is supplied with a PF-corrected electromechanical ballast. To guarantee a high level of safety, it is made in insulation Class II .

496

α 12°

α 52°

α 36°

100

300

150

450

75 150

450

750

500

H mm

Ø mm

Med Lux Max Lux

H mm

Ø mm

1000 2000 3000 4000 5000

220 450 670 900 1120

19381 32343 4845 8086 2153 3594 1211 2120 775 1295

1000 2000 3000 4000 5000

650 1310 1960 2610 3270

MT (CDM-T) - 70W - G12 Flow 6400 Im Max 32342.80 cd

Three types of optical components allow to choose among light cones with different width: 12°, 36°, and 52° (codes 5101 and 5102).

750

Med Lux Max Lux

5764 1441 640 360 231

MT (CDM-T) - 70W - G12 Flow 6400 Im Max 9734.80 cd

9734 2434 1082 608 389

H mm

15 Ø mm

1000 950 2000 1910 3000 2860 4000 3820 5000 4770

Med Lux Max Lux

5547 1387 616 347 222

MT (CDM-T) - 150W - G12 Flow 14000 Im Max 10737.13 cd

10737 2684 1193 671 429

SAIL

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

Optical components and light sources Three types of optical components have been designed for Sail: spot, medium, flood. The light sources used by the luminaire are metal halide discharge lamps (70W and 150W, White-Son 100W). DISCHARGE LAMPS MT (CDM-T) - G12 MT (CDM-T) - G12 STH - PG12 - 1

70W 150W 100W

The high-bay installation can be height-adjusted using the steel cable connected to an effective adjustment system set in the ceiling rose.

497

Technical specifications In addition to the accessories for pole-mounting, the ceiling-mounting base and wall fixing supports, the series is also provided with wall-washers louvers, anti-glare shields, directional louvers and antivandalism protection grid. Structural features Installation: high-bay, wall, pole Luminaire housing: diamond draw and die-cast aluminium Louver: tempered glass Reflectors: super-pure oxidised and polished aluminium Light sources: metal-halide discharge lamps Accessories: wall/pole fixing supports, wall-washer louvers, anti-glare shields, directional louvers, anti-vandalism protection grid Standard finishing: grey, anthracite Protection class: IP65 Insulation class: II Power supply: 230V - 50Hz

Installation types are different either on pole or on wall and several spotlights can be mounted.

498

Pole-mounting with two spotlights Kit code 671

Pole-mounting with two spotlights Kit code 673

Pole-mounting with two spotlights Kit code 676

SAIL

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

Wall-mounting with three spotlights Kit code 676

Pole-mounting with one spotlight Kit code 670

Wall-mounting with one spotlight Kit code 674-675

Pole-mounting with three spotlights Kit code 672

Wall-mounting with three spotlights Kit code 672

499

SAIL

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

Ceiling mounting Kit code 683

Electrical track mounting Kit code 682

High-bay mounting Kit code 678

500

Adjustable projector for discharge lamps and metal halide lamps. It comes complete with power-factor-corrected electromechanical ballast. Front louver in tempered glass.

CODE

DESCRIPTION

2820

2822

2824

MT (CDM-T) - 70W - G12 230V - 50Hz Colour: 18 - 19 IP 65 Kg 7.00

MT (CDM-T) - 150W - G12 230V - 50Hz Colour: 18 - 19 IP 65 Kg 7.00

STH (SDW-T) - 100W - PG12-1 230V - 50Hz Colour: 18 - 19 IP 65 Kg 7.00

ACCESSORIES

336

Directional louvers Wall-washer shield Anti-vandalism protection grid Reflector 2 x 6째 Reflector 2 x 26째

684 685 686 930 934

190

PHOTOMETRIC CURVES 72 H(m) D1(m) D2(M) Lux Lux 2x18째 2x18째 (med) (max)

1 0.65 0.65 5764 9734 150

1.31

1.31 1441 2434

3 1.96 1.96 640 1082 750

MT 150 W G12

Size (mm)

4 2.61 2.61 360 608 5 3.27 3.27 231 389

18 grey 19 anthracite NOTE

502

Brackets and racks for wall-, pole-, high-bay- and electrical track mounting.

SAIL

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

670

DESCRIPTION

Size (mm)

Pole mounting Single support for one spotlight Steel sheet with epoxy polyester coat finish Stainless steel screws Colour: 18 - 19

CODE

180° 357

176

180°

Pole mounting Double support for two spotlights Steel sheet with epoxy polyester coat finish Stainless steel screws Colour: 18 - 19 305

305

180°

176

671

180°

Pole and wall mounting Structure for three spotlights Steel sheet with epoxy polyester coat finish Stainless steel screws Colour: 18 - 19

1474 392

180°

1400 392

672

18 grey 19 anthracite NOTE

503

Brackets and racks for pole-, wall-, high-bay- and electrical track mounting.

CODE

Size (mm)

Pole mounting Structure for two spotlights Steel sheet with epoxy polyester coat finish Stainless steel screws Colour: 18 - 19 79

673

DESCRIPTION

180°

392

1203

180°

Pole mounting Structure for two spotlights Steel sheet with epoxy polyester coat finish Stainless steel screws Colour: 18 - 19

679

180°

392

1203

Wall mounting Single bracket for spotlight Steel sheet with epoxy polyester coat finish Stainless steel screws Colour: 18 - 19 180°

180° 306

176

674

180°

Wall mounting Single bracket for spotlight Steel sheet with epoxy polyester coat finish Stainless steel screws 180° Colour: 18 - 19

90°

180° 138

176

675

180°

18 grey 19 anthracite NOTE

504

Brackets and racks for pole-, wall-, high-bay- and electrical track mounting.

SAIL

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

Size (mm)

Wall mounting Structure for three spotlights Steel sheet with epoxy polyester coat finish Stainless steel screws Colour: 18 - 19

High-bay mounting Structure for three spotlights Steel sheet with epoxy polyester coat finish Stainless steel screws Ceiling rose with power supply cable Colour: 18 - 19 180째

180째

683

High-bay mounting Kit for high-bay installation including: ceiling rose with power supply cable (h 2800 mm), steel cable with height adjustment device Colour: 19 anthracite grey

682

Electrical track mounting with cable Mechanical adapter with steel cable and electrical adapter with power supply cable

678

max 2000

180째

552

1203

392

180째

676

DESCRIPTION

1203 392

CODE

18 grey 19 anthracite NOTE

505

Tapered cone-shaped pole to be mounted directly in the ground or with in-ground recessed plate fixing.

SAIL

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

DESCRIPTION

Direct ground mounting

Poles to be mounted directly in the ground Steel with epoxy polyester coat finish. The pole is provided with cable slot, earthing connection and electrical equipment slot. Colour: 19 894

4 metres above ground

895

6 metres above ground

896

9 metres above ground

Poles 9 meters with plate

897

4 metres above ground

898

6 metres above ground

899

9 metres above ground

DESCRIPTION Poles with plate Steel with epoxy polyester coat finish. The pole is provided with earthing connection and electrical equipment slot Colour: 19

CODE

Poles 4/6 meters with plate

CODE

DESCRIPTION

For poles 9 metres high

Ø16

Ø24

400

For poles 4 and 6 metres high

889

888

300

Recessed plate with tie-rods for fixing to the ground Hot-galvanised steel

D2 888-889

400 300 260

400

260 200

Ø22

H1 4000 6000 9000

Ø30

H2 500 800 800

D1 60 60 60

D2 105 128 158

19 anthracite NOTE

507

NUT Technical specifications The Nut outdoor projector is extremely flexible in its applications. It is provided by Quattrobi in two different sizes (height: 415 and 615 mm), for specific installations and uses. It is equipped with a range of accessories for wall, ground and pole mounting, with solutions that allow to install multiple overlaying lighting elements. The projector is entirely made of die-cast aluminium and is fitted with a front louver in high-resistance tempered glass. The reflector is made of super-pure oxidized and polished aluminium, with spot, superspot, medium, flood, road, symmetrical and asymmetrical optical components. Gaskets are of silicone material and screws of stainless steel. II insulation class guarantees maximum safety. The hot-galvanised and coated steel poles, to be mounted on the ground or with fixing plate, are available in three different heights (4000 - 6000 - 9000 mm) and are provided with cable inlet slot, earthing connection, electrical equipment slot. The projector uses metal halide discharge lamps and is supplied with a PF-corrected electromechanical ballast. With UV stabilised epoxy-polyester coat finish, Nut is available in grey and anthracite standard colours. Thanks to the materials used and to the special structural solutions, the luminaires of the Nut line are weatherproof and can be installed even in severe environmental settings.

Road optical components according to Rule CEI EN 13201 Lane width 5 m – Lamp power 70W Distance between poles 27 m – Lamp mounting height 6.4 m I/H ratio = 4.2

Photometric requirements Lm [cd/m2] UO UI Real values 0.6 0.38 0.4 Nominal values according to class ME5 ≥0.5 ≥0.35 ≥0.4

510

TI [%] 5 ≥15

Optical components and light sources Different types of optical components are available for Nut: spot, superspot, medium, flood, road, symmetrical and asymmetrical. The light sources used by the projector are metal halide discharge lamps (70W, 150W and 250W - G12; 45W - 60W - 90W - 140W - PGZ12; 70W - 150W - Rx7s; 250W - Fc2; 70W - E27. DISCHARGE LAMPS MT (CDM-T) - G12 MT (CDM-T) - G12 MT (CDM-T) - G12 MD (CDM-TD) - RX7s MD (CDM-TD) - RX7s

70W 150W 250W 70W 150W

MD - Fc2

250W

PGZ12 PGZ12 PGZ12 PGZ12

45W 60W 90W 140W

ST - E27

80 120 160

69%

70W

Accessories The luminaire is equipped with a range of accessories for wall and pole mounting, as well as with wall-washer louvers and anti-glare shields, directional louvers, anti-vandalism protection grid.

Bike lane optical components according to Rule CEI EN 13201 Lane width 3 m – Lamp power 70W Distance between poles 21 m – Lamp mounting height 4.3 m I/H ratio = 4.9

Photometric requirements Em [lx] Emin [lx] Real values 22 3 Nominal values according to class S4 ≥5 ≥1

NUT

DESIGN - STEFANO DALLâ&#x20AC;&#x2122;OSSO

Structural features Installation: floor, wall and pole Luminaire housing: die-cast aluminium Louver: tempered glass Reflector: super-pure oxidised and polished aluminium Optical components: spot, superspot, medium, flood, road, symmetrical and asymmetrical Light sources: metal-halide discharge lamps Accessories: base and wall/pole fixing supports, wallwasher shields, anti-glare shields, directional louvers, anti-vandalism protection grid Standard finishing: grey, anthracite Protection class: IP65 Insulation class: II Power supply: 230V -50Hz

511

Adjustable projector for metal halide discharge lamps. Complete with power-factor-corrected electromechanical ballast Front louver in tempered glass.

NUT Small version Superspot optical component 2 x 2.5° - with bracket MT (CDM-T) - 70W - G12 230V - 50Hz Colour: 18 - 19 - IP 65

2735

Spot optical component 2 x 5°- with bracket MT (CDM-T) - 70W - G12 230V - 50Hz Colour: 18 - 19 - IP 65

2734

Medium optical component 2 x 15° - with bracket MT (CDM-T) - 70W - G12 230V - 50Hz Colour: 18 - 19 - IP 65

2736

Flood optical component 2 x 30° - with bracket MT (CDM-T) - 70W - G12 230V - 50Hz Colour: 18 - 19 - IP 65

2737

Road optical component - without bracket MT (CDM-T) - 70W - G12 230V - 50Hz Colour: 18 - 19 - IP 65

2730 2732

2731 2733

102 g

101

103 g

104 g

130 g

Symmetrical optical component - with bracket Symmetrical optical component - without bracket MD (CDM-TD) - 70W - RX7s 230V - 50Hz Colour: 18 - 19 - IP 65

Asymmetrical optical component - with bracket Asymmetrical optical component - without bracket MD (CDM-TD) - 70W - RX7s 230V - 50Hz Colour: 18 - 19 - IP 65

389

2738

410

CODE

ACCESSORIES NUT small 690 691 692 693 694

Wall-washer shield Anti-vandalism protection grid Lens for elliptical light beams Lens for circular light beams Anti-glare shield

NUT medium 695 696 697 698 699

185

249

Size (mm)

PHOTOMETRIC CURVES 101

102 180

H(m) D1(m) D2(M) Lux 2x2.5° 2x2.5° (med)

Lux (max)

130 180

180

H(m) D1(m) D2(M) Lux Lux 2x5° 2x5° (med) (max)

1 0.08 0.08 196150 32691

0.3 0.3 30151 50251

2 0.16 0.16 15000 25000

0.6 0.6 6600 11000

0.8 0.8 3120 5200

90 200

20000 1000

3 0.26 0.26 7080 11800 6000

40000

4 0.34 0.34 3480 5800 MT (CDM-T) 70W - G12

5 0.4

0.4

1770 2954

103

MT (CDM-T) 70W - G12

1440 2400

1.2

714 1190

400 600 800 1000

cd/klm

MT (CDM-T) - 70W

104 180

H(m) D1(m) D2(M) Lux 2x15° 2x15° (med)

Lux (max)

H(m) D1(m) D2(M) Lux 2x30° 2x30° (med)

Lux (max)

1.16 1.16 2931 4884

1610 2683

2.3 2.3 587

979

3 3.46 3.46 244

407

1000

200

1.6

915

1525

556

926

2.3 2.6 364

607

2500

500

4 MT (CDM-T) 70W - G12

180 90

0.5 0.5 3300 5500

MT (CDM-T) 70W - G12

4 4.62 4.62 133

221

5 5.78 5.78 83

139

18 grey 19 anthracite All luminaires are equipped with PFcorrected electromechanical ballast. NOTE

512

Adjustable projector for metal halide discharge lamps. Complete with power-factor-corrected electromechanical ballast. Front louver in tempered glass.

NUT

DESIGN - STEFANO DALL’OSSO

NUT Medium version

Symmetrical optical component - with bracket Symmetrical optical component - without bracket MD - 250W -Fc2 - 230V - 50Hz Colour: 18 - 19 - IP 65

Asymmetrical optical component - with bracket Asymmetrical optical component - without bracket MD (CDM-TD) - 150W - RX7s 230V - 50Hz Colour: 18 - 19 - IP 65

Asymmetrical optical component - with bracket Asymmetrical optical component - without bracket MD - 250W -Fc2 - 230V - 50Hz Colour: 18 - 19 - IP 65

2760 2758 2762 2764

Superspot optical component 2 x 2.5° - with bracket Spot optical component 2 x 5°- with bracket Medium optical component 2 x 15° - with bracket Flood optical component 2 x 30° - with bracket MD (CDM-T) - 150W - G12 - 230V - 50Hz Colour: 18 - 19 - IP 65

2761 2759 2763 2765

Superspot optical component 2 x 2.5° - with bracket Spot optical component 2 x 5°- with bracket Medium optical component 2 x 15° - with bracket Flood optical component 2 x 30° - with bracket MT (CDM-TD) - 250W - G12 - 230V - 50Hz Colour: 18 - 19 - IP 65

2766

Road optical component - without bracket MT (CDM-T) - 150W - G12 - 230V - 50Hz Colour: 18 - 19 - IP 65

2751 2753

2754 2756

2755 2757

546

Symmetrical optical component - with bracket Symmetrical optical component - without bracket MD (CDM-TD) - 150W - RX7s - 230V - 50Hz Colour: 18 - 19 - IP 65

2750 2752

Road optical component - without bracket MT (CDM-T) - 250W - G12 230V - 50Hz Colour: 18 - 19 - IP 65

2767

2771 2768

Road optical component - without bracket 45W - PGZ12 60W - PGZ12 - 230V - 50Hz Colour: 18 - 19 - IP 65

2770 2769

Road optical component - without bracket 90W - PGZ12 140W - PGZ12 - 230V - 50Hz Colour: 18 - 19 - IP 65

131

132

9 90 200

450

800

600 750

90 100

150

600

cd/klm

132

311

Size (mm)

133

180 90

300

MT (CDM-T) - 150W

133

400

1000

180

231

Road optical component - without bracket 70W - ST - E27 230V - 50Hz Colour: 18 - 19 - IP 65

2772

131

587

CODE

200 300 400 cd/klm

PGZ12 - 45W

500

cd/klm

E27 (ST) - 70W

18 grey 19 anthracite All luminaires are equipped with PFcorrected electromechanical ballast. NOTE

513

Brackets for pole head mounting.

CODE

DESCRIPTION Bracket for pole head mounting Single support for one spotlight. Pole head mounting Steel sheet with epoxy polyester coat finish. Stainless steel screws Colour: 19

320 300 301

NUT Small Single support, short Single support, medium Single support, long

321 302 303

NUT Medium Single support, short Single support, medium Single support, long

302

210

300

301

258

380 210

258

321

258

290

280

320

210

430

Size (mm)

303

192 221.50

372

521

19 anthracite NOTE

516

Brackets for pole head mounting.

NUT

DESIGN - STEFANO DALLâ&#x20AC;&#x2122;OSSO

CODE

DESCRIPTION Bracket for pole head mounting Double support for two spotlights Pole head mounting Steel sheet with epoxy polyester coat finish Stainless steel screws - Colour: 19

322 304 305

NUT Small Double support, short Double support, medium Double support, long

323 306 307

NUT Medium Double support, short Double support, medium Double support, long

280

290

Size (mm)

323 258

210

322

383

210

380

430

443

258

305

258

304

306

307 743

1043 19 anthracite NOTE

517

Brackets for intermediate pole mounting.

CODE

DESCRIPTION

308 309

NUT Small Single support, medium Single support, long

310 311

NUT Medium Single support, medium Single support, long

3000

Bracket for intermediate pole mounting Single support for one spotlight. Intrermediate mounting Steel sheet with epoxy polyester coat finish Stainless steel screws Colour: 19

397

210

310

309

258

210

308

258

380

430

Size (mm)

311

547

19 anthracite NOTE

518

Wall mounting brackets.

NUT

DESIGN - STEFANO DALLâ&#x20AC;&#x2122;OSSO

CODE

DESCRIPTION Bracket for mounting Single bracket for one spotlight Wall mounting Steel sheet with epoxy polyester coat finish Stainless steel screws Colour: 19

312 313

NUT Small Single support, medium Single support, long

314 315

NUT Medium Single support, medium Single support, long

370

210

314

313

258

210

312

258

380

430

Size (mm)

315

520

19 anthracite NOTE

519

Brackets for angular mounting

CODE

DESCRIPTION Angular mounting Single bracket for one spotlight Angular mounting Steel sheet with epoxy polyester coat finish Stainless steel screws Colour: 19

316 317

NUT Small Single support, medium Single support, long

318 319

NUT Medium Single support, medium Single support, long

210

380

430

Size (mm)

317

258

316

318 466

319 616

19 anthracite NOTE

520

Tapered cone-shaped pole to be mounted directly in the ground or with in-ground recessed plate fixing.

NUT

DESIGN - STEFANO DALL’OSSO

DESCRIPTION

Direct ground mounting

Poles to be mounted directly in the ground Steel with epoxy polyester coat finish The pole is provided with cable slot, earthing connection, electrical equipment slot. Colour: 19 894

4 metres above ground

895

6 metres above ground

896

9 metres above ground

Poles 9 meters with plate

897

4 metres above ground

898

6 metres above ground

899

9 metres above ground

DESCRIPTION Poles with plate Steel with epoxy polyester coat finish The pole is provided with earthing connection and electrical equipment slot Colour: 19

CODE

Poles 4/6 meters with plate

CODE

DESCRIPTION

For poles 9 metres high Ø16

Ø24

400

For poles 4 and 6 metres high

889

888

300

Recessed plate with tie-rods for fixing to the ground Hot-galvanised steel

260

888-889

400

400 300

260 200

Ø22

H1 4000 6000 9000

Ø30

H2 500 800 800

D1 60 60 60

D2 105 128 158

19 anthracite NOTE

521

DINAMIS

Technical specifications The projector housing is entirely made of die-cast aluminium and is complete with an upper louver in tempered glass. The reflector is made of super-pure oxidised and polished aluminium. Silicone gaskets and stainless steel screws make it solid and weather-proof. Protection class is IP 65. For high safety, Dinamis complies with Insulation class II requirements. The luminaire with UV-stabilized epoxy polyester coat finish is offered in three colours: white, grey, anthracite grey. The pole-mounted type family, with different brackets for one or two luminaires, also includes tapered poles in hot-galvanised steel with epoxy polyester coat finish, to meet two different installation needs: directly in the ground or with fixing plate. All poles feature cable slots, earthing connection and electrical equipment slots. Three lengths are available: 4 m, 6 m and 9 m â&#x20AC;&#x201C; standard colour: anthracite grey.

524

Structural features Installation: wall or pole-mounted Luminaire housing: die-cast aluminium Reflectors: super-pure oxidised and polished aluminium Louvers: tempered glass Light sources: metal-halide discharge lamps, compact fluorescent lamps, mains voltage halogen lamps Standard finishing: white, grey, anthracite Protection class: IP65 Insulation class: II Power supply: 230V - 50Hz

DINAMIS

DESIGN - STEFANO DALL’OSSO

Light sources The projector can accommodate different types of lamps: 26-42 W compact fluorescent lamps, to 70-150 W RX7s metal halide lamps. An option features an additional warm-up light – 150 W R7s halogen bulb – which activates as soon as the luminaire is turned on and automatically turns off when the metal halide lamp is fully operational. DISCHARGE LAMPS MD (CDM-TD) - R7s MD (CDM-TD) - R7s

70W 150W

MD (CDM-TD) - R7s

70W

MD (CDM-TD) - R7s

150W

MT (CDM-T) - G12 MT (CDM-T) - G12 HALOGEN LAMPS HDG - R7s HDG - R7s FLUORESCENT LAMPS

Dinamis projectors can use different optical components for symmetrical and asymmetrical light distribution. These luminaires may also include double emission.

All poles are made of hotgalvanised steel, with cable slots and earthing connection.

asymmetrical optical component asymmetrical optical component symmetrical optical component with dual emission symmetrical optical component with dual emission

70W 150W max 150W max 300W

warm-up lamp asymmetrical optical component

FSQH (TC-D) - G24q-3

2 x 26W

symmetrical optical component

FSMH (T/E) - GX24q-4

2 x 42W

symmetrical optical component

Dinamis family is complemented with a range of brackets purposely designed for pole mounting. Poles come in three lengths: 4 m, 6 m and 9 m, with the following mounting options: directly in the ground or with an in-ground recessed plate.

Dinamis installation is simplified through the internal isolator situated between the fixing plate and luminaire housing, for quick connection.

9000 mm

6000 mm

4000 mm

525

Adjustable wall-mounted luminaire with indirect light distribution for discharge and halogen lamps. With ballast and tempered glass louver. Insulation class II .

CODE

DESCRIPTION Asymmetrical optical component MD (CDM-TD) - 70W - RX7s 230V - 50Hz Colour: 01 - 18 - 19 IP 65 Kg 5.8

2801

86 g

Bike lane optical component MT (CDM-T) - 70W - G12 230V - 50Hz Colour: 01 - 18 - 19 IP 65 Kg 5.8

117 g

Bike lane optical component MT (CDM-T) - 150W - G12 230V - 50Hz Colour: 01 - 18 - 19 IP 65 Kg 7.0

118 g

Asymmetrical optical component MD (CDM-TD) - 150W - RX7s 230V - 50Hz Colour: 01 - 18 - 19 IP 65 Kg 7.0

2803

2814

336

220

2816

106

Asymmetrical optical component HDG - 300W max - R7s 250V max Colour: 01 - 18 - 19 IP 65 Kg 4.6

2809

ACCESSORIES Brackets for pole mounting Size (mm)

PHOTOMETRIC CURVES 85

HDG - 150W - R7s

117

FSQ (TC-D) 26W G24q-3

HDG 300W R7s

118

MT (CDM-T) - 70W

MT (CDM-T) - 150W

01 white 18 grey 19 anthracite NOTE

526

Adjustable wall-mounted luminaire with indirect light distribution for discharge lamps, complete with warm-up system. With ballast and tempered glass louver. Insulation class II .

DINAMIS

DESIGN - STEFANO DALLâ&#x20AC;&#x2122;OSSO

CODE 2805

Asymmetrical optical component MD (CDM-TD) - 70W - RX7s HDG - 150W max - R7s 230V - 50Hz Colour: 01 - 18 - 19 IP 65 Kg 6.0

Asymmetrical optical component MD (CDM-TD) - 150W - RX7s HDG - 150W max - R7s 230V - 50Hz Colour: 01 - 18 - 19 IP 65 Kg 7.2

86 g

106

2807

DESCRIPTION

220

336

ACCESSORIES Brackets for pole mounting Size (mm)

PHOTOMETRIC CURVES 85

HDG - 150W - R7s

FSQ (TC-D) 26W G24q-3

01 white 18 grey 19 anthracite NOTE

527

Adjustable wall-mounted luminaire with indirect light distribution for discharge lamps or compact fluorescent lamps, complete with warm-up system. With ballast and tempered glass louver. Insulation class II .

CODE 2804 EL

2806

2810

2812

DESCRIPTION Symmetrical optical component FSQH (TC-D) - 2 x 26W - G24q-3 230V - 50Hz Colour: 01 - 18 - 19 IP 65 Kg 5.8 Electronic ballast Symmetrical optical component FSMH (T/E) - 2 x 42W - GX24q-4 230V - 50Hz Colour: 01 - 18 - 19 IP 65 Kg 5.0 Electronic ballast Double-emission symmetrical optical component MD (CDM-TD) - 70W - RX7s 230V - 50Hz Colour: 01 - 18 - 19 IP 65 Kg 5.8 Double-emission symmetrical optical component MD (CDM-TD) - 150W - RX7s 230V - 50Hz Colour: 01 - 18 - 19 IP 65 Kg 7.0

106

ACCESSORIES Brackets for pole mounting

220

336

Size (mm)

01 white 18 grey 19 anthracite NOTE

528

Brackets for Dinamis luminaire pole mounting.

DINAMIS

DESIGN - STEFANO DALLâ&#x20AC;&#x2122;OSSO

CODE

DESCRIPTION

Size (mm)

640

Single bracket Steel sheet with epoxy polyester coat finish. Colour: 19

123

644

Double bracket Steel sheet with epoxy polyester coat finish. Colour: 19

246

642

Single bracket Steel sheet with epoxy polyester coat finish. Colour: 19

646

Double bracket Steel sheet with epoxy polyester coat finish. Colour: 19

643

Single bracket Steel sheet with epoxy polyester coat finish. Colour: 19

647

Double bracket Steel sheet with epoxy polyester coat finish. Colour: 19

392

794

460

640

1280

19 anthracite 3 and 4-bracket supports are available on demand NOTE

529

Brackets and racks for pole-, wall-, high-bay- and electrical track mounting.

DINAMIS

DESIGN - STEFANO DALL’OSSO

DESCRIPTION

Direct ground mounting

Poles to be mounted directly in the ground Steel with epoxy polyester coat finish The pole is provided with cable slot, earthing connection, electrical equipment slot. Colour: 19 894

4 metres above ground

895

6 metres above ground

896

9 metres above ground

Poles 9 meters with plate

897

4 metres above ground

898

6 metres above ground

899

9 metres above ground

DESCRIPTION Poles with plate Steel with epoxy polyester coat finish The pole is provided with earthing connection and electrical equipment slot Colour: 19

CODE

Poles 4/6 meters with plate

CODE

DESCRIPTION

For poles 9 metres high

Ø16

Ø24

400

For poles 4 and 6 metres high

889

888

300

Recessed plate with tie-rods for fixing to the ground Hot-galvanised steel

D2 888-889

400 300 260

400

260 200

Ø22

H1 4000 6000 9000

H2 500 800 800

19 anthracite grey NOTE

530

Ø30

D1 60 60 60

D2 105 128 158

PHOENIX Designing light for street furniture means providing an interpretation which, concerning Phoenix, is the combination of harmony and appearance to offer purposely designed solutions for pole, ground and wall mounting.

Based on the type of use, Phoenix projectors can be equipped with different optical components, i.e. flood, spot and asymmetrical lamps.

534

Technical specifications Phoenix projector is made of die-cast aluminium with epoxy polyester coat finish. The highly resistant front louver in tempered glass is secured by means of a frame with silicone gasket to provide IP65 protection. All screws are in stainless steel. Super-pure oxidised and polished aluminium optical components include: spot, flood, asymmetrical types. This luminaire uses metal halide discharge lamps and is supplied with a PF-corrected electromechanical ballast. The pole-mounted type with indirect light features a fibreglass reinforced resin reflecting panel. The hotgalvanised steel tapered pole is available in two different heights (3400 and 5000 mm) and two types â&#x20AC;&#x201C; one is mounted directly in the ground while the other is equipped with a plate. A cable slot, earthing connection, electrical equipment slot complement the offer. This luminaire family meets the strictest weatherproof and application requirements.

Accessories In addition to the wall-mounting base and pole fixing support, Phoenix is enhanced with wall-washers, antiglare shields, and anti-vandalism protection grid. Structural features Installation: pole, wall, ground Luminaire housing: die-cast aluminium Louver: tempered glass Reflector: super-pure oxidised and polished aluminium Optical components: spot, flood, asymmetrical lamps. Light sources: metal-halide discharge lamps Accessories: bases for wall and ground mounting, polemounting support, wall-washers and anti-glare shields, anti-vandalism protection grid Finishing: grey, anthracite Protection class: IP65 Insulation class: I Power supply: 230V - 50Hz

PHOENIX

DESIGN - Arch. A. BORDOGNA

Optical components and light sources Phoenix accommodates spot, flood or asymmetrical optical components. Light sources are metal halide discharge lamps (70-150 W RX7s, 250 W Fc2, 70-150 W G12, 100 W PG12-1) DISCHARGE LAMPS MD (CDM-TD) - RX7s MD (CDM-TD) - RX7s MD (CDM-TD) - RX7s MD (CDM-TD) - RX7s MD - Fc2 MD - Fc2 MT (CDM-T) - G12 MT (CDM-T) - G12 MT (CDM-T) - G12 MT (CDM-T) - G12 STH - PG12-1

70W 150W 70W 150W 250W 250W 70W 150W 70W 150W

flood optical component flood optical component asymmetrical optical component asymmetrical optical component flood optical component asymmetrical optical component flood optical component flood optical component spot optical component spot optical component

100W

flood optical component

Phoenix offerings support different installations: ground or wall-mounted projector, and the pole type with a diffuser for indirect lighting.

535

Indirect lighting system consisting of a projector for metal halide discharge lamps and fibreglass reinforced resin reflecting panel.

CODE 2720

MD (CDM-TD) - 150W - RX7s 230V - 50Hz Colour: 19 IP 65 Kg 28.00

MD - 250W - Fc2 230V - 50Hz Colour: 19 IP 65 Kg 28.20

984

1100

2722

DESCRIPTION

1155 Size (mm)

19 anthracite grey NOTE

538

1343

Indirect lighting system consisting of a projector for metal halide discharge lamps and fibreglass reinforced resin reflecting panel.

PHOENIX

DESIGN - Arch. A. BORDOGNA

2726

MD (CDM-TD) - 150W - RX7s 230V - 50Hz Colour: 19 IP 65 Kg 28.00

MD - 250W - Fc2 230V - 50Hz Colour: 19 IP 65 Kg 28.20

984

2724

DESCRIPTION

1100

CODE

1343

Size (mm)

19 anthracite grey NOTE

539

Outdoor projector for discharge lamps. Complete with PF-corrected electromechanical ballast and tempered glass louver.

2700

2702

2704

2706

2708

2710

DESCRIPTION Flood optical component MD (CDM-TD) - 70W - RX7s 230V - 50Hz Colour: 18 - 19 IP 65 Kg 7.50

Flood optical component MD (CDM-T) - 70W - G12 230V - 50Hz Colour: 18 - 19 IP 65 Kg 7.50

Flood optical component MD (CDM-T) - 150W - G12 230V - 50Hz Colour: 18 - 19 IP 65 Kg 8.00

Flood optical component MD (CDM-TD) - 150W - RX7s 230V - 50Hz Colour: 18 - 19 IP 65 Kg 8.00 Flood optical component MD - 250W - Fc2 230V - 50Hz Colour: 18 - 19 IP 65 Kg 8.50

Flood optical component STH - 100W - PG12-1 230V - 50Hz Colour: 18 - 19 IP 65 Kg 7.70

313

CODE

Ø288 Size (mm)

ACCESSORIES 880 881 882 883 884 885 886

Fixing plate to mount the projector on the wall or floor Fixing support to mount the projector on a pole Fixing support to mount two projectors on a pole Wall-washer shield Anti-vandalism protection grid Anti-glare shield (only for code 2706, 2708, 2710) Anti-glare shield (only for code 2700, 2702, 2704)

18 grey 19 anthracite grey NOTE

542

Ø288

Outdoor projector for discharge lamps. Complete with PF-corrected electromechanical ballast and tempered glass louver.

PHOENIX

DESIGN - Arch. A. BORDOGNA

2701

2703

2705

2712

2714

2716

DESCRIPTION Asymmetrical optical component MD (CDM-TD) - 70W - RX7s 230V - 50Hz Colour: 18 - 19 IP 65 Kg 7.50

Spot optical component 2 x 5° MT (CDM-T) - 70W - G12 230V - 50Hz Colour: 18 - 19 IP 65 Kg 7.50

Spot optical component 2 x 5° MT (CDM-T) - 150W - G12 230V - 50Hz Colour: 18 - 19 IP 65 Kg 8.00

Spot optical component 2 x 15° MT (CDM-T) - 70W - G12 230V - 50Hz Colour: 18 - 19 IP 65 Kg 7.50

Asymmetrical optical component MD (CDM-TD) - 150W - RX7s 230V - 50Hz Colour: 18 - 19 IP 65 Kg 8.00 Asymmetrical optical component MD - 250W - Fc2 230V - 50Hz Colour: 18 - 19 IP 65 Kg 8.50

313

CODE

Ø288 2718

Spot optical component 2 x 15° MT (CDM-T) - 150W - G12 230V - 50Hz Colour: 18 - 19 IP 65 Kg 8.00

Ø288

Size (mm)

ACCESSORIES 880 881 882 883 884 886

18 grey 19 anthracite grey NOTE

543

Complementary accessories.

880

DESCRIPTION Fixing plate to mount the projector on the wall or floor Die-cast aluminium Colour: 18 - 19

210

CODE

195

881

Fixing support to mount the projector on a pole Die-cast aluminium Colour: 18 - 19

882

Fixing support to mount two projectors on a pole Die-cast aluminium Colour: 18 - 19

883

170

280

120

Wall-washer shield Colour: 18 - 19

884

Anti-vandalism protection grid

885

Anti-glare shield Only for code: 2706, 2708, 2710

886

Anti-glare shield Only for code: 2701, 2703, 2705, 2700, 2702, 2704

Size (mm)

18 grey 19 anthracite grey NOTE

544

Tapered pole to be mounted directly in the ground or with inground recessed plate fixing.

PHOENIX

DESIGN - Arch. A. BORDOGNA

DESCRIPTION

Direct ground mounting

Poles to be mounted directly in the ground Steel with epoxy polyester coat finish The pole is provided with cable slot, earthing connection, electrical equipment slot. Colour: 19 894

4 metres above ground

895

6 metres above ground

896

9 metres above ground

Poles 9 meters with plate

897

4 metres above ground

898

6 metres above ground

899

9 metres above ground

DESCRIPTION Poles with plate Steel with epoxy polyester coat finish The pole is provided with earthing connection and electrical equipment slot Colour: 19

CODE

Poles 4/6 meters with plate

CODE

DESCRIPTION

For poles 9 metres high Ø16

Ø24

400

For poles 4 and 6 metres high

889

888

300

Recessed plate with tie-rods for fixing to the ground Hot-galvanised steel

D2 888-889

400 300 260

400

260 200

Ø22

H1 4000 6000 9000

H2 500 800 800

Ø30

D1 60 60 60

D2 105 128 158

19 anthracite grey NOTE

545

IKY

Technical specifications Its high protection degree – IP65 – allows to use Iky in indoor and outdoor environments. Thanks to its sober and clean design, quite small dimensions – 350 x 350 mm – and white, grey or anthracite finishing colours, this luminaire is suitable for installation in halls, corridors, buildings, walkways and on external walls. The structure in die-cast aluminium, protection louver in opalin tempered glass or opalin polycarbonate, combined with die-cast coated aluminium optical components, provide the highest level of resistance and duration. The ballast is electromechanical, with PF correction and electronic. Iky is also available with built-in emergency function.

Thanks to a small hinged front door, this luminaire can be opened safely by just one person even if it is mounted in difficult locations. Maintenance operations are also easier and quicker.

546

IKY

DESIGN - RIGHETTO - DUSE

COMPACT FLUORESCENT LAMPS FSQ (TC-D) - G24d-3 - G24q-3

2 x 26W

FSMH (T/E) - GX24q-4

2 x 42W

DISCHARGE LAMPS MD - (CDM-TD) - RX7s

70W

MAINS VOLTAGE INCANDESCENT LAMPS IAA - E27

Optical components and light sources Iky is designed to use the following light sources: compact fluorescent lamps (2 x 26 W G24d-3 e 2 x 42 W G24q-4); discharge lamps (70 W RX7s); mains voltage incandescent lamps (2 x 75 W max E27).

2 x 75W max

Structural features Installation: wall or ceiling Luminaire housing: die-cast aluminium Ballast housing: die-cast aluminium Louver: tempered glass or polycarbonate Reflector: die-cast coated aluminium Light sources: compact fluorescent lamps, discharge lamps and mains voltage incandescent lamps Gaskets: silicone Standard finishing: white, grey, anthracite Protection class: IP65 Insulation class: I Power supply: 230V -50Hz

547

Fixed wall and ceiling-mounted luminaire for compact fluorescent lamps, discharge lamps or mains voltage incandescent lamps. With PF-corrected electromechanical ballast and tempered glass or polycarbonate louver.

IKY

DESIGN - RIGHETTO - DUSE

CODE 2400 EL

DESCRIPTION Electronic ballast FSQH (TC-D) - 2 x 26W - G24q-3 230V - 50Hz

Colour: 01 - 18 - 19 IP 65 Kg 5.80 Polycarbonate louver

Electronic ballast FSMH (T/E) - 2 x 42W - GX24q -4 230V - 50Hz

2402

Colour: 01 - 18 - 19 IP 65 Kg 5.80 Polycarbonate louver

130

MD (CDM-TD) - 70W - RX7s 230V - 50Hz Colour: 01 - 18 - 19 IP 65 Kg 6.20 Tempered glass louver

2406

350

IAA - 2 x 75W max - E27 250V max Colour: 01 - 18 - 19 IP 65 Kg 5.60 Tempered glass louver

2408

g 350 Size (mm)

PHOTOMETRIC CURVES 81

η =70%

H(m) D1(m) D2(M) Lux Lux 53°+77 48°+55 (med) (max)

FSQ 42W GX24q-4

H(m) D1(m) D2(M) Lux Lux 2x52° 2x53° (med) (max)

4.3

2.5

147 682

2.5

462 1637

8.6

5.1

170

5.0

2.2

115 409

12.9 7.6

7.6

3.8

17.2 10.2

10.6

29 102

21.5 12.7

12.7

MD 70W RX7s

182

01 white 18 grey 19 anthracite NOTE

548

LED

Future lighting, for a brighter present.

Quattrobiâ&#x20AC;&#x2122;s experience and continuous enhancement of its production and design in the LED sector is not just visible in its beautiful products, which are admired and not easily forgotten. It can also be seen in their production technologies, energy saving and durability, in the inďŹ nite possibilities of applying technical lighting systems which colour the present in what will be the future.

NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW

NEW NEW NEW NEW NEW NEW

Kor P04 - P06 LED Liberty LED Buble LED Run LED Track Extreme LED Lex Domino LED Ghost LED Gesso LED Vacuum LED Smoke LED Beam Light Kles Microlight Tyle Pak MP1 Brick Round Hill - Square Hill Alias LED Traccia LED Nut LED Dinamis LED

ILLUMINATE WITH NEW TECHNOLOGIES LED TECHNOLOGY LED Technology LEDs are the future of the current lighting solutions used in public and private spaces. Due to their current and clear advantages, these light sources are likely to replace not only conventional incandescent lamps, which are gradually being phased out worldwide, but also many of the solutions that are regarded as most innovative, such as energy-saving fluorescent, halogen, and sodium lamps. LEDs lower energy consumption costs, dramatically reduce maintenance requirements and today guarantee unprecedented performance and creative levels. Lighting Emitting Diodes are electronic semiconductors consisting of a material that emits light when electric current flows through it. Since their appearance in the market (1962), research has been oriented to the maximization of light output in relation to energy consumption. Initially LEDs could produce only red colored light. Later on, LEDs capable of emitting orange, yellow, green, blue and purple light were developed. Today, this technology enables to bring to the market solutions that replicate the spectrum of solar light for which human vision is optimized: the so-called white-light LEDs. These are the result of two different technologies: a lamp can comprise red, green and blue LED light sources that, when combined, produce white light; or a blue LED light source that is covered by phosphors and is able to shift the light spectrum. All the Advantages The luminous efficacy (i.e. the ratio of luminous flux to power) of a 100 watt incandescent light source is 17 lumens per watt, that of a halogen light source can be up to 30 lumens per watt and in the case of a fluorescent sources it ranges from 60 to 80 lumens per watt. Today the ratio of flux produced by a LED and power consumption is 50 lumens per watt. In recent years, LEDs have also become increasingly brighter, emit better light quality and are mechanically more resistant, so that they can be used even in the most demanding situations (outdoors or in hard to reach locations). While high-quality LEDs are more expensive than conventional lamps, their long service life (ranging between 15,000 and 45,000 hours) and the energy savings they provide (70 to 80%) enable to optimize the return on investment. Costs are further reduced in the long term, as these light sources do not require any expensive maintenance and replacement operations. The latest products may also be adjusted through the standard dimmers used for incandescent lamps.

552

Designing with LEDs Longer life, energy savings and virtually zero maintenance: no wonder LEDs are now leaders in home lighting and especially in architectural lighting, increasingly replacing the light sources used in urban lighting. The technological improvements in their quality and color variety are proving optimal for designers that want to create decorative effects in indoor and outdoor environments, also due to the automated control that can be applied both to monochrome LEDs and using the RGB system. Changing light intensity and color is easy, by recalling programmable light sets on request. LEDs are increasingly used in outdoor lighting - walkways, parks, public spaces. They also provide a compelling option in road and urban lighting - their color rendering index (i.e. the faithfulness in reproducing colors) is four times as high as that of sodium lamps. The cold white light of LEDs increases visibility of drivers and pedestrians, white light can better cut through fog and increases image quality of surveillance cameras. LEDs also enable to reduce light pollution, when they are to be placed in urban and historical areas. They are directional sources emitting light beams that are defined during the construction phase and that can be integrated with any secondary optical components.

Adjustable projector with LED lighting system. Luminaire housing: drawn aluminium. Adjustable both vertically and horizontally.

KOR

CODE

DESCRIPTION

5520 BIC 14 5520 BIN 14 5520 BIC 25 5520 BIN 25

14° beam, hot white LED - 3000K - 3600 lm 14° beam, neutral white LED - 4200K - 4400 lm 25° beam, hot white LED - 3000K - 3600 lm 25° beam, neutral white LED - 4200K - 4400 lm 230V - 50Hz Array - 57W - 2100 mA Colour: 01 - 02 - 18 - 20 IP 40

270

ø130

150

Size (mm)

ACCESSORIES 658 659

Adapter kit for ceiling installation (available colours: 01 - 02 - 18) Adapter kit for recessed adapter - ø 105 (available colours: 01 - 02 - 18) 658

659

Ø105

01 white 02 black 18 grey 20 black housing / chromiumplated reflector NOTE

554

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

Adjustable projector with LED lighting system. Optical assembly: die-cast aluminium. Luminaire housing: drawn aluminium. Adjustable both vertically and horizontally.

P04 LED

CODE

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

DESCRIPTION

5311 BIC 10 5311 BIC 30 5311 BIC 40 5311 BIN 10 5311 BIN 30 5311 BIN 40

10° beam, hot white LED - 3000K - 1260 lm 30° beam, hot white LED - 3000K - 1260 lm 40° beam, hot white LED - 3000K - 1260 lm 10° beam, neutral white LED - 4200K - 1390 lm 30° beam, neutral white LED - 4200K - 1390 lm 40° beam, neutral white LED - 4200K - 1390 lm 230V - 50Hz 9 LED - 12W - 500 mA Colour: 01 - 02 - 18 IP 40 Kg 1.5

White

275

183

ø130

160

Size (mm)

ACCESSORIES 658 659

Adapter kit for ceiling installation (available colours: 01 - 02 - 18) Adapter kit for recessed adapter - ø 105 (available colours: 01 - 02 - 18) 658

659

Ø105

01 white 02 black 18 grey NOTE

556

Adjustable projector with LED lighting system. Optical assembly: die-cast aluminium. Luminaire housing: drawn aluminium. Adjustable both vertically and horizontally.

P06 LED

CODE

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

DESCRIPTION

5411 BIC 10 5411 BIC 30 5411 BIC 40 5411 BIN 10 5411 BIN 30 5411 BIN 40

White

275

183

ø130

160

Size (mm)

ACCESSORIES 658 659

Adapter kit for ceiling installation (available colours: 01 - 02 - 18) Adapter kit for recessed adapter - ø 105 (available colours: 01 - 02 - 18) 658

659

Ø105

01 white 02 black 18 grey NOTE

557

Adjustable projector with LED lighting system. Luminaire housing: die-cast aluminium. Adjustable both vertically and horizontally.

LIBERTY LED

CODE

DESCRIPTION

5200 BIC 10 5200 BIC 30 5200 BIC 40 5200 BIN 10 5200 BIN 30 5200 BIN 40

White

150

180

210

240

120

150

180

210

240

223

120

246

ø130

Size (mm)

ACCESSORIES 658 659

Adapter kit for ceiling installation (available colours: 01 - 02 - 18) Adapter kit for recessed adapter - ø 105 (available colours: 01 - 02 - 18) 658

659

Ø105

01 white 02 black 18 grey 20 chromium-plated/black NOTE

559

BUBLE LED

560

Adjustable projector with LED lighting system. Luminaire housing: drawn aluminium. Optical assembly: coated sheet steel. Adjustable both vertically and horizontally.

BUBLE LED

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

CODE

DESCRIPTION

5150 BIC 10 5150 BIC 30 5150 BIC 40 5150 BIN 10 5150 BIN 30 5150 BIN 40

White

186 45

183

202

Ø140 Size (mm)

ACCESSORIES 658 659

Adapter kit for ceiling installation (available colours: 01 - 02 - 18) Adapter kit for recessed adapter - ø 105 (available colours: 01 - 02 - 18) 658

659

Ø105

01 white 02 black 18 grey 20 chromium-plated/black NOTE

561

Adjustable projector with LED lighting system. Luminaire housing: drawn aluminium. Adjustable both vertically and horizontally.

RUN LED

CODE

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

DESCRIPTION

5500 BIC 10 5500 BIC 30 5500 BIC 45 5500 BIN 10 5500 BIN 30 5500 BIN 45

10° beam, hot white LED - 3000K - 420 lm 30° beam, hot white LED - 3000K - 420 lm 45° beam, hot white LED - 3000K - 420 lm 10° beam, neutral white LED - 4200K - 463 lm 30° beam, neutral white LED - 4200K - 463 lm 45° beam, neutral white LED - 4200K - 463 lm 230V - 50Hz 3 LED - 4,5W - 500 mA Colour: 01 - 02 - 18 IP 40 Kg 0.80

White

ø6 0

105

140 123

110

Size (mm)

ACCESSORIES 658 659

Adapter kit for ceiling installation (available colours: 01 - 02 - 18) Adapter kit for recessed adapter - ø 105 (available colours: 01 - 02 - 18) 658

659

Ø105

01 white 02 black 18 grey NOTE

562

Electrical track with elliptical profile to supply power to projectors.

TRACK

CODE 701

702

703

704

DESCRIPTION Length: 1 m Colour: 01 - 02 - 18 Kg 1.0

Length: 2 m Colour: 01 - 02 - 18 Kg 2.0

Length: 3 m Colour: 01 - 02 - 18 Kg 3.0

Length: 4 m Colour: 01 - 02 - 18 Kg 4.0

g 100 cm.

g 200 cm.

g 300 cm.

g 400 cm.

DESIGN FEATURES

Three-phase system Line voltage 400/430V (3p+N). Utilization voltage (luminaires) 230/240V. For three-phase systems, 16A load is allowed on each protected phase with common neutral. Load expressed in power is 3680/4000VA (i.e. 4000 W with resistive load) on each protected phase (16A) and corresponds to a total power of 12000VA max (12000 W resistive load). One-phase system

One-phase system Line voltage 230/240V (phase neutral). Utilization voltage (luminaires) 230/240V. With one-phase systems, 16A load is allowed on the protected line. The same load (16A) can be on one single switching connection or distributed among two or three switching connections. 16A load corresponds to 3680/4000VA, that is 3680/4000W resistive load.

42 Size (mm)

Three-phase system

16A

R S T N

16A

Accessory wiring diagram

710

713

707

outside

713 714

710

713

710

outside

707

710

outside

713

712

712 dx

714 outside

01 white 02 black 18 grey NOTE

564

Accessories for electrical track.

TRACK

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

CODE 706

707

DESCRIPTION

Size (mm)

Left power supply connection Colour: 01 - 02

Right power supply connection Colour: 01 - 02

710

External L-joint Colour: 01 - 02

709

Internal L-joint Colour: 01 - 02

708

Central power supply connection and linear joint Colour: 01 - 02

712

Right T-joint Colour: 01 - 02

80 706 - 707

709 - 710

120 708

Left T-joint Colour: 01 - 02

714

X-joint Colour: 01 - 02

711

Flexible joint Colour: 01 - 02

717

Track end covers Colour: 01 - 02

715

Linear joint with contacts Colour: 01 - 02

716

Linear joint without contacts Colour: 01 - 02

719

High-bay installation with ceiling rose Length: 2 m 2 Colour: 01 - 02

720

In-ceiling support

718

Track caps Length: 1 m Colour: 01 - 02

721

Fitting for two modules Length: 100 mm

712 - 713

120

310 714

711

717

715

716

719

720

718

2000

713

120

100 721

01 white 02 black NOTE

565

Electrical track with square profile to supply power to projectors.

CODE 741

742

743

740

DESCRIPTION Length: 1 m Colour: 01 - 02 - 18 Kg 1.2

Length: 2 m Colour: 01 - 02 - 18 Kg 2.2

Length: 3 m Colour: 01 - 02 - 18 Kg 3.3

Length: 4 m Colour: 01 - 02 - 18 Kg 4.4

g 100 cm.

g 200 cm.

g 300 cm.

g 400 cm.

DESIGN FEATURES

42 Size (mm)

Three-phase system

16A

R S T N

16A

Accessory wiring diagram

746

750

745

outside

750 723

746

750

746

outside

745

746

outside

750

749

749 dx

723 outside

01 white 02 black 18 grey NOTE

566

Accessories for electrical track.

TRACK

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

CODE 744

745

DESCRIPTION

Size (mm)

Left power supply connection Colour: 01 - 02

Right power supply connection Colour: 01 - 02

746

External L-joint Colour: 01 - 02

747

Internal L-joint Colour: 01 - 02

748

Central power supply connection and linear joint Colour: 01 - 02

749

Right T-joint Colour: 01 - 02

80 744 - 745

746 - 747

120 748

Left T-joint Colour: 01 - 02

723

X-joint Colour: 01 - 02

735

Track end covers Colour: 01 - 02

715

Linear joint with contacts Colour: 01 - 02

727

Linear joint without contacts Colour: 01 - 02

719

High-bay installation with ceiling rose Length: 2 m Colour: 01 - 02

720

In-ceiling support

718

Fitting for two modules Length: 100 mm Colour: 01 - 02

721

Fitting for two modules Length: 100 mm

749 - 750

120

723

735

715

727

2000

750

120

719

720

100 718

721

01 white 02 black NOTE

567

Recessed luminaire with LED lighting system. Optical assembly: telescopic and adjustable on two axes. Luminaire housing: coated painted sheet steel. Type with outer profile. Complete with ballast.

EXTREME LED

Size (mm)

155

263

g White

275

142

120

10° beam, hot white LED - 3000K - 1260 lm 30° beam, hot white LED - 3000K - 1260 lm 40° beam, hot white LED - 3000K - 1260 lm 10° beam, neutral white LED - 4200K - 1390 lm 30° beam, neutral white LED - 4200K - 1390 lm 40° beam, neutral white LED - 4200K - 1390 lm 230V - 50Hz 3x9 LED - 12W - 500 mA Colour: 01 - 18 IP 40 Kg 2.00 F

142

120

10° beam, hot white LED - 3000K - 1260 lm 30° beam, hot white LED - 3000K - 1260 lm 40° beam, hot white LED - 3000K - 1260 lm 10° beam, neutral white LED - 4200K - 1390 lm 30° beam, neutral white LED - 4200K - 1390 lm 40° beam, neutral white LED - 4200K - 1390 lm 230V - 50Hz 2x9 LED - 12W - 500 mA Colour: 01 - 18 IP 40 Kg 1.45 F

392 155

3340 BIC 10 3340 BIC 30 3340 BIC 40 3340 BIN 10 3340 BIN 30 3340 BIN 40

142

g White

3240 BIC 10 3240 BIC 30 3240 BIC 40 3240 BIN 10 3240 BIN 30 3240 BIN 40

142

120

3140 BIC 10 3140 BIC 30 3140 BIC 40 3140 BIN 10 3140 BIN 30 3140 BIN 40

DESCRIPTION

155

CODE

g White

405

01 white 18 grey NOTE

568

Recessed luminaire with LED lighting system. Optical assembly: telescopic and adjustable on two axes. Luminaire housing: coated painted sheet steel. Type without outer profile. Complete with ballast.

EXTREME LED

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

CODE

DESCRIPTION

Size (mm)

142 155

g White

155

263

g White

275

142

120

3340R BIC 10 10° beam, hot white LED - 3000K - 1260 lm 3340R BIC 30 30° beam, hot white LED - 3000K - 1260 lm 3340R BIC 40 40° beam, hot white LED - 3000K - 1260 lm 3340R BIN 10 10° beam, neutral white LED - 4200K - 1390 lm 3340R BIN 30 30° beam, neutral white LED - 4200K - 1390 lm 3340R BIN 40 40° beam, neutral white LED - 4200K - 1390 lm 230V - 50Hz 3x9 LED - 12W - 500 mA Colour: 01 - 18 IP 40 Kg 2.00 F

142

120

3240R BIC 10 10° beam, hot white LED - 3000K - 1260 lm 3240R BIC 30 30° beam, hot white LED - 3000K - 1260 lm 3240R BIC 40 40° beam, hot white LED - 3000K - 1260 lm 3240R BIN 10 10° beam, neutral white LED - 4200K - 1390 lm 3240R BIN 30 30° beam, neutral white LED - 4200K - 1390 lm 3240R BIN 40 40° beam, neutral white LED - 4200K - 1390 lm 230V - 50Hz 2x9 LED - 12W - 500 mA Colour: 01 - 18 IP 40 Kg 1.45 F

142

120

3140R BIC 10 10° beam, hot white LED - 3000K - 1260 lm 3140R BIC 30 30° beam, hot white LED - 3000K - 1260 lm 3140R BIC 40 40° beam, hot white LED - 3000K - 1260 lm 3140R BIN 10 10° beam, neutral white LED - 4200K - 1390 lm 3140R BIN 30 30° beam, neutral white LED - 4200K - 1390 lm 3140R BIN 40 40° beam, neutral white LED - 4200K - 1390 lm 230V - 50Hz 9 LED - 12W - 500 mA Colour: 01 - 18 IP 40 Kg 0.95

155

392

g White

405

01 white 18 grey NOTE

569

Recessed luminaire with LED lighting system. Optical assembly: telescopic and adjustable on two axes. Luminaire housing: coated painted sheet steel. Type without outer profile. Complete with ballast.

Size (mm)

128 276

285

160

120

10° beam, hot white LED - 3000K - 1260 lm 30° beam, hot white LED - 3000K - 1260 lm 40° beam, hot white LED - 3000K - 1260 lm 10° beam, neutral white LED - 4200K - 1390 lm 30° beam, neutral white LED - 4200K - 1390 lm 40° beam, neutral white LED - 4200K - 1390 lm 230V - 50Hz 3x9 LED - 12W - 500 mA Colour: 01 - 18 IP 40 Kg 2.00 F

148

160

g White

3341 BIC 10 3341 BIC 30 3341 BIC 40 3341 BIN 10 3341 BIN 30 3341 BIN 40

Ø180

10° beam, hot white LED - 3000K - 1260 lm 30° beam, hot white LED - 3000K - 1260 lm 40° beam, hot white LED - 3000K - 1260 lm 10° beam, neutral white LED - 4200K - 1390 lm 30° beam, neutral white LED - 4200K - 1390 lm 40° beam, neutral white LED - 4200K - 1390 lm 230V - 50Hz 2x9 LED - 12W - 500 mA Colour: 01 - 18 IP 40 Kg 1.45 F

Ø162

g White

3241 BIC 10 3241 BIC 30 3241 BIC 40 3241 BIN 10 3241 BIN 30 3241 BIN 40

120

3141 BIC 10 3141 BIC 30 3141 BIC 40 3141 BIN 10 3141 BIN 30 3141 BIN 40

DESCRIPTION

120

CODE

g White

148 260 408

420

01 white 18 grey NOTE

570

Recessed luminaire with LED lighting system. Optical assembly: telescopic and adjustable on two axes. Luminaire housing: coated painted sheet steel. Type without outer profile. Complete with ballast.

EXTREME LED

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

Size (mm)

128 276

285

160

120

10° beam, hot white LED - 3000K - 1260 lm 30° beam, hot white LED - 3000K - 1260 lm 40° beam, hot white LED - 3000K - 1260 lm 10° beam, neutral white LED - 4200K - 1390 lm 30° beam, neutral white LED - 4200K - 1390 lm 40° beam, neutral white LED - 4200K - 1390 lm 230V - 50Hz 3x9 LED - 12W - 500 mA Colour: 01 - 18 IP 40 Kg 2.00 F

148

160

g White

3341R BIC 10 3341R BIC 30 3341R BIC 40 3341R BIN 10 3341R BIN 30 3341R BIN 40

Ø180

10° beam, hot white LED - 3000K - 1260 lm 30° beam, hot white LED - 3000K - 1260 lm 40° beam, hot white LED - 3000K - 1260 lm 10° beam, neutral white LED - 4200K - 1390 lm 30° beam, neutral white LED - 4200K - 1390 lm 40° beam, neutral white LED - 4200K - 1390 lm 230V - 50Hz 2x9 LED - 12W - 500 mA Colour: 01 - 18 IP 40 Kg 1.45 F

Ø162

g White

3241R BIC 10 3241R BIC 30 3241R BIC 40 3241R BIN 10 3241R BIN 30 3241R BIN 40

120

3141R BIC 10 3141R BIC 30 3141R BIC 40 3141R BIN 10 3141R BIN 30 3141R BIN 40

DESCRIPTION

120

CODE

g White

148 260 408

420

01 white 18 grey NOTE

571

Luminaire for installing ceiling with LED lighting system. Optical assembly: telescopic and adjustable on two axes. Luminaire housing: coated painted sheet steel. Complete with ballast.

EXTREME LED

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

Size (mm)

175

3145 BIC 10 3145 BIC 30 3145 BIC 40 3145 BIN 10 3145 BIN 30 3145 BIN 40

DESCRIPTION

160

CODE

160

10° beam, hot white LED - 3000K - 1260 lm 30° beam, hot white LED - 3000K - 1260 lm 40° beam, hot white LED - 3000K - 1260 lm 10° beam, neutral white LED - 4200K - 1390 lm 30° beam, neutral white LED - 4200K - 1390 lm 40° beam, neutral white LED - 4200K - 1390 lm 230V - 50Hz 2x9 LED - 12W - 500 mA Colour: 01 - 18 IP 40 Kg 1.45 F

160

3245 BIC 10 3245 BIC 30 3245 BIC 40 3245 BIN 10 3245 BIN 30 3245 BIN 40

175

White

281

10° beam, hot white LED - 3000K - 1260 lm 30° beam, hot white LED - 3000K - 1260 lm 40° beam, hot white LED - 3000K - 1260 lm 10° beam, neutral white LED - 4200K - 1390 lm 30° beam, neutral white LED - 4200K - 1390 lm 40° beam, neutral white LED - 4200K - 1390 lm 230V - 50Hz 3x9 LED - 12W - 500 mA Colour: 01 - 18 IP 40 Kg 2.00 F

160

3345 BIC 10 3345 BIC 30 3345 BIC 40 3345 BIN 10 3345 BIN 30 3345 BIN 40

175

White

410

g White

ACCESSORIES 919

High-bay installation kit. It includes: ceiling rose, power supply cable, steel wires with height adjusting devices

01 white 18 grey NOTE

572

Recessed luminaires adjustable with LED lighting system. Luminaire housing: die-cast aluminium. Ballast not included.

LEX

CODE 9035 RGB 25 9035 RGB 45

DESCRIPTION Three-colour RGB 25° beam opening - 525 lm 45° beam opening - 525 lm 15 LED - 17 W - 350 mA max Colour: 01 - 18 IP 40 Kg 1.00

RGB

156

Ballast to be ordered separately

350°

60° Ø196 Ø185 Size (mm)

01 white 18 grey NOTE

576

Recessed luminaires fixed and adjustable with LED lighting system. Luminaire housing: die-cast aluminium. Ballast not included.

LEX

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

1090 RGB 10 1090 RGB 25 1090 RGB 45

DESCRIPTION

Size (mm)

Three-colour RGB 10° beam opening - 120 lm 25° beam opening - 120 lm 45° beam opening - 120 lm 3 LED - 3,8 W - 350 mA max Colour: 01 - 18 IP 40 Kg 0.180

CODE

Ø95 Ø90

RGB

Ballast to be ordered separately Three-colour RGB 10°beam opening - 105 lm 25° beam opening - 105 lm 45° beam opening - 105 lm 3 LED - 3,6 W - 350 mA max Colour: 01 - 18 IP 40 Kg 0.80

1125 RGB 10 1125 RGB 25 1125 RGB 45

RGB

Ø46

Ø60

Ballast to be ordered separately

01 white 18 grey NOTE

577

Connection examples.

Esempio di connessione Series connection

451

452 451

cod. 450

230V - 50HZ Es Series connection for independent channels Control unit DMX 512 - Max 6 channels

453

455

455 451

230V - 50HZ Esempio di connessione

578

451

Ballast and complementary accessories

LEX

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

CODE

Remote control It allows to switch on and off and to adjust the light intensity of the colour flow 140

450

Size (mm)

DESCRIPTION

62 RGB LED ballast from 190V to 256V AC - 350 mA IP 40

g 75

451

Maximum connection of 1 luminaires code 9035 Rgb Maximum connection of 8 luminaires code 1050 Rgb Maximum connection of 8 luminaires code 1125 Rgb

147

Receiver plus control for RGB LED

452

115

Maximum connection of 25 ballasts for LED Rgb code 451

Ă&#x2DC;46 97

DMX 512 control unit Max 6 channels

453

1450 DMX interface

Maximum connection of 25 ballasts for LED Rgb code 451

455

456 457

Connection kit Length: 1 metre Length: 3 metres

579

Recessed luminaires fixed and adjustable with LED lighting system. Luminaire housing: die-cast aluminium. Ballast not included.

CODE

DESCRIPTION

9035 BIC 10 9035 BIC 30 9035 BIC 40 9035 BIN 10 9035 BIN 30 9035 BIN 40

156

White

350°

60° Ø196 Ø185 Size (mm)

ACCESSORIES 441 459

Ballast from 190V to 265V ac - 350mA - IP40 Ballast from 190V to 265V ac - 500mA - IP40

01 white 18 grey NOTE

580

Recessed luminaires fixed and adjustable with LED lighting system. Luminaire housing: die-cast aluminium. Ballast not included.

LEX

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

CODE

DESCRIPTION

1090 BIC 10 1090 BIC 30 1090 BIC 45 1090 BIN 10 1090 BIN 30 1090 BIN 45

10° beam, hot white LED - 3000K - 420 lm 30° beam, hot white LED - 3000K - 420 lm 45° beam, hot white LED - 3000K - 420 lm 10° beam, hot white LED - 4200K - 463 lm 30° beam, hot white LED - 4200K - 463 lm 45° beam, hot white LED - 4200K - 463 lm 3 LED - 4,5W - 500 mA max Colour: 01 - 18 IP 40 Kg 0.180 F

Size (mm)

Ø90

Ø95

White

Ballast to be ordered separately 10° beam, hot white LED - 3000K - 80 lm 30° beam, hot white LED - 3000K - 80 lm 45° beam, hot white LED - 3000K - 80 lm 10° beam, hot white LED - 4200K - 90 lm 30° beam, hot white LED - 4200K - 90 lm 45° beam, hot white LED - 4200K - 90 lm 1 LED - 1,2W - 350 mA max Colour: 01 - 18 IP 40 Kg 0.80 F

White

1125 BIC 10 1125 BIC 30 1125 BIC 45 1125 BIN 10 1125 BIN 30 1125 BIN 45

Ø60 Ø46

Ballast to be ordered separately

ACCESSORIES 441 459

Ballast from 190V to 265V ac - 350mA - IP40 Ballast from 190V to 265V ac - 500mA - IP40

01 white 18 grey NOTE

581

Wall-mounted recessed luminaire with LED lighting system. Complete with electronic ballast. Type with outer profile. Luminaire housing: steel sheet. Reflector: ribbed aluminium.

DOMINO LED

DESCRIPTION

3003 BIC 3003 BIN

Size (mm)

Hot white LED - 3000K Neutral white LED - 4200K 230V - 50Hz 63 LED smd - 10W Colour: 01 - 18 IP 40 Kg 2.20 Electronic ballast

240

CODE

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

225 240

Hot white LED - 3000K Neutral white LED - 4200K 230V - 50Hz 63 LED smd - 10W Colour: 01 - 18 IP 40 Kg 2.40 Electronic ballast

225

g 360

3005 BIC 3005 BIN

345 240

Hot white LED - 3000K Neutral white LED - 4200K 230V - 50Hz 63 LED smd - 10W Colour: 01 - 18 IP 40 Kg 2.00 Electronic ballast

225

120

3007 BIC 3007 BIN

105 240

225

ACCESSORIES

954

953

540

420

955

300

Recessed frame in hot-galvanized steel - For code 3003 Dimensions: width 310 mm, height 420 mm, depth 90 mm Recessed frame in hot-galvanized steel - For code 3005 Dimensions: width 310 mm, height 540 mm, depth 90 mm Recessed frame in hot-galvanized steel - For code 3007 Dimensions: width 310 mm, height 300 mm, depth 90 mm

953

310

954

310

955

01 white 18 grey NOTE

582

Wall-mounted recessed luminaire with LED lighting system. Complete with electronic ballast. Type with outer profile. Luminaire housing: steel sheet. Reflector: ribbed aluminium.

DOMINO LED

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

DESCRIPTION

3008 BIC 3008 BIN

Size (mm)

Hot white LED - 3000K Neutral white LED - 4200K 230V - 50Hz 189 LED smd - 30W Colour: 01 - 18 IP 40 Kg 3.90 Electronic ballast

g 240

CODE

600

225 585

3011 BIC 3011 BIN

Hot white LED - 3000K Neutral white LED - 4200K 230V - 50Hz 18 LED smd - 3W Colour: 01 - 18 IP 40 Kg 0.70 Electronic ballast

120

Hot white LED - 3000K Neutral white LED - 4200K 230V - 50Hz 18 LED smd - 3W Colour: 01 - 18 IP 40 Kg 0.50 Electronic ballast

75 83

g 240

3009 BIC 3009 BIN

225 90

ACCESSORIES Recessed frame in hot-galvanized steel - For code 3009 Dimensions: width 160 mm, height 270 mm, depth 90 mm Recessed frame in hot-galvanized steel for code 3011 Dimensions: width 160 mm, height 420 mm, depth 90 mm Recessed frame in hot-galvanized steel - For code 3008 Dimensions: width 640 mm, height 450 mm, depth 90 mm

957 958

957

160

958

450

270

420

956

160

640

956

01 white 18 grey NOTE

583

Recessed luminaires with LED lighting system. Luminaire housing: coated sheet steel and die-cast aluminium.

GHOST LED

CODE

DESCRIPTION

1254 BIC 10 1254 BIC 30 1254 BIC 40 1254 BIN 10 1254 BIN 30 1254 BIN 40

105

Size (mm)

Ø158 F

White

Ø153

10° beam, hot white LED - 3000K - 420 lm 30° beam, hot white LED - 3000K - 420 lm 45° beam, hot white LED - 3000K - 420 lm 10° beam, neutral white LED - 4200K - 463 lm 30° beam, neutral white LED - 4200K - 463 lm 45° beam, neutral white LED - 4200K - 463 lm 3 LED - 4,5W - 500 mA max Colour: 01 -02 - 18 IP 43

1250 BIC 10 1250 BIC 30 1250 BIC 45 1250 BIN 10 1250 BIN 30 1250 BIN 45

Electronic ballast to be ordered separately

Ø90 Ø85

White

10° beam, hot white LED - 3000K - 80 lm 25° beam, hot white LED - 3000K - 80 lm 45° beam, hot white LED - 3000K - 80 lm 10° beam, neutral white LED - 4200K - 90 lm 25° beam, neutral white LED - 4200K - 90 lm 45° beam, neutral white LED - 4200K - 90 lm 1 LED - 1,2W - 350 mA max Colour: 01 -02 - 18 IP 43

1252 BIC 10 1252 BIC 25 1252 BIC 45 1252 BIN 10 1252 BIN 25 1252 BIN 45

Electronic ballast to be ordered separately

Ø75 Ø70

White

Electronic ballast to be ordered separately

ACCESSORIES 441 459

Ballast from 190V to 265V ac - 350mA - IP40 Ballast from 190V to 265V ac - 500mA - IP40

01 white 02 black 18 grey NOTE

584

GHOST LED

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

585

Recessed luminaires with LED lighting system. Luminaire housing: coated sheet steel and die-cast aluminium.

1254 RGB 10 1254 RGB 25 1254 RGB 45

DESCRIPTION

Size (mm)

RGB technology 10° beam opening - 525 lm 25° beam opening - 525 lm 45° beam opening - 525 lm 15 LED - 17 W - 350 mA max Colour: 01 - 02 - 18 IP 43

RGB

105

CODE

Ø158

Ø153

Electronic ballast to be ordered separately RGB technology 10° beam opening - 120 lm 25° beam opening - 120 lm 45° beam opening - 120 lm 3 LED - 1 W - 350 mA max Colour: 01 - 02 - 18 IP 43

1250 RGB 10 1250 RGB 25 1250 RGB 45

Ø90 RGB

Ø85

Electronic ballast to be ordered separately RGB technology 25° beam opening - 120 lm 45° beam opening - 120 lm 3 LED - 1 W - 350 mA max Colour: 01 - 02 - 18 IP 43

RGB

1252 RGB 25 1252 RGB 45

Ø70

Ø75

Electronic ballast to be ordered separately

01 white 02 black 18 grey NOTE

586

Ballast and complementary accessories.

GHOST LED

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

CODE

Remote control It allows to switch on and off and to adjust the light intensity of the colour flow 140

450

Size (mm)

DESCRIPTION

62 RGB LED ballast from 190V to 256V AC - 350 mA IP 40

g 75

451

Maximum connection of 1 luminaires code 1254 Rgb Maximum connection of 8 luminaires code 1250 Rgb Maximum connection of 8 luminaires code 1252 Rgb

147

Receiver plus control for RGB LED

452

115

Maximum connection of 25 ballasts for LED Rgb code 451

Ă&#x2DC;46 97

DMX 512 control unit Max 6 channels

453

1450 DMX interface

Maximum connection of 25 ballasts for LED Rgb code 451

455

456 457

Connection kit Length: 1 metre Length: 3 metres

587

Recessed luminaires with LED lighting system. Luminaire housing: plaster and die-cast aluminium. Type with round profile. Ballast not included.

GESSO LED

CODE

DESCRIPTION 10° beam, hot white LED - 3000K - 1260 lm 30° beam, hot white LED - 3000K - 1260 lm 40° beam, hot white LED - 3000K - 1260 lm 10° beam, neutral white LED - 4200K - 1390 lm 30° beam, neutral white LED - 4200K - 1390 lm 40° beam, neutral white LED - 4200K - 1390 lm 9 LED - 12W - 500 mA max Colour: 01 IP 40

9790 BIC 10 9790 BIC 30 9790 BIC 40 9790 BIN 10 9790 BIN 30 9790 BIN 40

White

10° beam, hot white LED - 3000K - 420 lm 25° beam, hot white LED - 3000K - 420 lm 45° beam, hot white LED - 3000K - 420 lm 10° beam, neutral white LED - 4200K - 463 lm 25° beam, neutral white LED - 4200K - 463 lm 45° beam, neutral white LED - 4200K - 463 lm 3 LED - 1,5W - 500 mA max Colour: 01 IP 40

9780 BIC 10 9780 BIC 25 9780 BIC 45 9780 BIN 10 9780 BIN 25 9780 BIN 45

White

9781 BIC 10 9781 BIC 25 9781 BIC 45 9781 BIN 10 9781 BIN 25 9781 BIN 45

White

ACCESSORIES Ballast from 190V ac to 265V ac - 350 mA - IP 40 Ballast from 190V ac to 265V ac - 500 mA - IP 40

125 12

9781

9780 90

9790

220 140

160 72

180

140 220

72 160

160

441 459

162

162 222 222 Size (mm)

590

162

182

01 white NOTE

Recessed luminaires with LED lighting system. Luminaire housing: plaster and die-cast aluminium. Type with square profile. Ballast not included.

GESSO LED

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

CODE

9795 BIC 10 9795 BIC 30 9795 BIC 40 9795 BIN 10 9795 BIN 30 9795 BIN 40

White

9785 BIC 10 9785 BIC 25 9785 BIC 45 9785 BIN 10 9785 BIN 25 9785 BIN 45

White

ACCESSORIES Ballast from 190V ac to 265V ac - 350 mA - IP 40 Ballast from 190V ac to 265V ac - 500 mA - IP 40

441 459

9795

9785

220 147

147 220

87 160

160 87

162 222 222 Size (mm)

162 01 white NOTE

591

Recessed luminaires with LED lighting system. Luminaire housing: plaster and die-cast aluminium. Type with round profile. Ballast not included.

GESSO LED RGB

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

DESCRIPTION RGB technology 10° beam opening - 525 lm 25° beam opening - 525 lm 45° beam opening - 525 lm 15 LED - 1W - 350 mA max Colour: 01 IP 40

RGB

125

9781

9780 90

9790

F RGB

RGB technology 10° beam opening - 120 ml 25° beam opening - 120 ml 45° beam opening - 120 ml 3 LED - 1W - 350 mA max Colour: 01 IP 40

9781 RGB 10 9781 RGB 25 9781 RGB 45

RGB

RGB technology 10° beam opening - 120 ml 25° beam opening - 120 ml 45° beam opening - 120 ml 3 LED - 1W - 350 mA max Colour: 01 IP 40

9780 RGB 10 9780 RGB 25 9780 RGB 45

9790 RGB 10 9790 RGB 25 9790 RGB 45

220 140

160 72

180

140 220

72 160

160

CODE

162

162 222 222 Size (mm)

592

162

182

01 white NOTE

Recessed luminaires with LED lighting system. Luminaire housing: plaster and die-cast aluminium. Type with square profile. Ballast not included.

CODE

DESCRIPTION RGB technology 10° beam opening - 525 lm 25° beam opening - 525 lm 45° beam opening - 525 lm 15 LED - 1W - 350 mA max Colour: 01 IP 40

9795 RGB 10 9795 RGB 25 9795 RGB 45

9795

RGB

RGB technology 10° beam opening - 120 ml 25° beam opening - 120 ml 45° beam opening - 120 ml 3 LED - 1W - 350 mA max Colour: 01 IP 40

9785 RGB 10 9785 RGB 25 9785 RGB 45

RGB

9785

220 147

147 220

87 160

160 87

162 222 222 Size (mm)

594

162 01 white NOTE

Ballast and complementary accessories.

GESSO LED RGB

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

CODE

Remote control It allows to switch on and off and to adjust the light intensity of the colour flow 140

450

Size (mm)

DESCRIPTION

62 RGB LED ballast from 190V to 256V AC - 350 mA IP 40

g 75

451

Maximum connection of 1 luminaires code 1254 Rgb Maximum connection of 8 luminaires code 1250 Rgb Maximum connection of 8 luminaires code 1252 Rgb

147

Receiver plus control for RGB LED

452

115

Maximum connection of 25 ballasts for LED Rgb code 451

Ă&#x2DC;46 97

DMX 512 control unit Max 6 channels

453

1450 DMX interface

Maximum connection of 25 ballasts for LED Rgb code 451

455

456 457

Connection kit Length: 1 metre Length: 3 metres

595

Recessed luminaire with LED lighting system. Complete with ballast. Luminaire housing: coated steel sheet structure and plaster modular panels. White opaline polycarbonate diffuser with concave or convex surface.

VACUUM LED

CODE

DESCRIPTION Diffuser with concave surface Module dimensions 595x595 mm Diffuser diameter 400 mm

9770 RGB

RGB technology 72 LED smd - 18W total - 12V 230V - 50Hz Colour: 01 IP 40

Diffuser with convex surface Module dimensions 770x770 mm Diffuser diameter 600 mm 9776 RGB

RGB technology 120 LED smd - 18W total - 12V 230V - 50Hz Colour: 01 IP 40

Diffuser with convex surface Module dimensions 595x595 mm Diffuser diameter 400 mm 9775 RGB

RGB technology 72 LED smd - 18W total - 12V 230V - 50Hz Colour: 01 IP 40

Diffuser with concave surface Module dimensions 770x770 mm Diffuser diameter 600 mm 9771 RGB

DESIGN - ANDREA ZANINI - AZ DESIGN

RGB technology 120 LED smd - 18W total - 12V 230V - 50Hz Colour: 01 IP 40

A B C

9770 RGB 220 595 595

9771 RGB 220 770 770

9770 RGB 220 595 595

Size (mm)

01 white

NOTE

596

9771 RGB 220 770 770

High-bay modules with LED lighting system. Equipped with electronic ballast. Luminaire housing: coat finish extruded aluminium profile Light sources: hot and cold white LED Finishing: white (white power supply cable), black (black power supply cable), chrome (black power supply cable), grey (black power supply cable)

SMOKE LED

4101 BIC 10 4101 BIC 25 4101 BIC 45 4101 BIN 10 4101 BIN 25 4101 BIN 45

4102 BIC 10 4102 BIC 25 4102 BIC 45 4102 BIN 10 4102 BIN 25 4102 BIN 45

Length 400 mm - Diameter 25 mm 10° beam, hot white LED - 3000K - 80 lm 25° beam, hot white LED - 3000K - 80 lm 45° beam, hot white LED - 3000K - 80 lm 10° beam, neutral white LED - 4200K - 90 lm 25° beam, neutral white LED - 4200K - 90 lm 45° beam, neutral white LED - 4200K - 90 lm 1 LED - 1W - 350 mA 230V - 50Hz Colour: 01 - 02 - 14 - 18 IP 40 Electronic ballast Complete with cable and jack Length 600 mm - Diameter 25 mm 10° beam, hot white LED - 3000K - 80 lm 25° beam, hot white LED - 3000K - 80 lm 45° beam, hot white LED - 3000K - 80 lm 10° beam, neutral white LED - 4200K - 90 lm 25° beam, neutral white LED - 4200K - 90 lm 45° beam, neutral white LED - 4200K - 90 lm 1 LED - 1W - 350 mA 230V - 50Hz Colour: 01 - 02 - 14 - 18 IP 40 Electronic ballast Complete with cable and jack

White

200

Length 200 mm - Diameter 25 mm 10° beam, hot white LED - 3000K - 80 lm 25° beam, hot white LED - 3000K - 80 lm 45° beam, hot white LED - 3000K - 80 lm 10° beam, neutral white LED - 4200K - 90 lm 25° beam, neutral white LED - 4200K - 90 lm 45° beam, neutral white LED - 4200K - 90 lm 1 LED - 1W - 350 mA 230V - 50Hz Colour: 01 - 02 - 14 - 18 IP 40 Electronic ballast Complete with cable and jack

Size (mm)

White

400

4100 BIC 10 4100 BIC 25 4100 BIC 45 4100 BIN 10 4100 BIN 25 4100 BIN 45

DESCRIPTION

White

600

CODE

ø150 36 2500 max

ø25 Size (mm)

01 white - white power supply cable 02 black - black power supply cable 14 chrome - black power supply cable 18 grey - black power supply cable NOTE

600

SMOKE LED

DESIGN - ANDREA ZANINI - AZ DESIGN

4104 BIC 10 4104 BIC 25 4104 BIC 45 4104 BIN 10 4104 BIN 25 4104 BIN 45

4105 BIC 10 4105 BIC 25 4105 BIC 45 4105 BIN 10 4105 BIN 25 4105 BIN 45

Length 400 mm - Diameter 60 mm 10° beam, hot white LED - 3000K - 420 lm 25° beam, hot white LED - 3000K - 420 lm 45° beam, hot white LED - 3000K - 420 lm 10° beam, neutral white LED - 4200K - 463 lm 25° beam, neutral white LED - 4200K - 463 lm 45° beam, neutral white LED - 4200K - 463 lm 3 LED - 1W - 350 mA 230V - 50Hz Colour: 01 - 02 - 14 - 18 IP 40 Electronic ballast Complete with cable and jack Length 600 mm - Diameter 60 mm 10° beam, hot white LED - 3000K - 420 lm 25° beam, hot white LED - 3000K - 420 lm 45° beam, hot white LED - 3000K - 420 lm 10° beam, neutral white LED - 4200K - 463 lm 25° beam, neutral white LED - 4200K - 463 lm 45° beam, neutral white LED - 4200K - 463 lm 3 LED - 1W - 350 mA 230V - 50Hz Colour: 01 - 02 - 14 - 18 IP 40 Electronic ballast Complete with cable and jack

White

200

Size (mm)

White

400

4103 BIC 10 4103 BIC 25 4103 BIC 45 4103 BIN 10 4103 BIN 25 4103 BIN 45

DESCRIPTION

White

600

CODE

ø150 36 2500 max

ø60 Size (mm)

01 white - white power supply cable 02 black - black power supply cable 14 chrome - black power supply cable 18 grey - black power supply cable NOTE

601

Ceiling module with LED lighting system. Completo di alimentatore elettronico. Corpo apparecchio: profilo di alluminio estruso verniciato Sorgenti luminose: LED bianchi a luce calda e luce fredda Finishing: white, black, chrome, grey

SMOKE LED

DESIGN - ANDREA ZANINI - AZ DESIGN

4107 BIC 10 4107 BIC 25 4107 BIC 45 4107 BIN 10 4107 BIN 25 4107 BIN 45

Length 200 mm - Diameter 60 mm 10° beam, hot white LED - 3000K - 420 lm 25° beam, hot white LED - 3000K - 420 lm 45° beam, hot white LED - 3000K - 420 lm 10° beam, neutral white LED - 4200K - 463 lm 25° beam, neutral white LED - 4200K - 463 lm 45° beam, neutral white LED - 4200K - 463 lm 3 LED - 1W - 350 mA 230V - 50Hz Colour: 01 - 02 - 14 - 18 IP 40 Electronic ballast Length 400 mm - Diameter 60 mm 10° beam, hot white LED - 3000K - 420 lm 25° beam, hot white LED - 3000K - 420 lm 45° beam, hot white LED - 3000K - 420 lm 10° beam, neutral white LED - 4200K - 463 lm 25° beam, neutral white LED - 4200K - 463 lm 45° beam, neutral white LED - 4200K - 463 lm 3 LED - 1W - 350 mA 230V - 50Hz Colour: 01 - 02 - 14 - 18 IP 40 Electronic ballast

Size (mm)

White

200

4106 BIC 10 4106 BIC 25 4106 BIC 45 4106 BIN 10 4106 BIN 25 4106 BIN 45

DESCRIPTION

ø60

White

400

CODE

ø60 Length 600 mm - Diameter 60 mm 10° beam, hot white LED - 3000K - 420 lm 25° beam, hot white LED - 3000K - 420 lm 45° beam, hot white LED - 3000K - 420 lm 10° beam, neutral white LED - 4200K - 463 lm 25° beam, neutral white LED - 4200K - 463 lm 45° beam, neutral white LED - 4200K - 463 lm 3 LED - 1W - 350 mA 230V - 50Hz Colour: 01 - 02 - 14 - 18 IP 40 Electronic ballast

White

600

4108 BIC 10 4108 BIC 25 4108 BIC 45 4108 BIN 10 4108 BIN 25 4108 BIN 45

ø60

01 white 02 black 14 chrome 18 grey NOTE

603

Luminaire with LED lighting system. Anodised aluminium structure. Louver in white opaline or transparent plastic. Ballast not included. Provided with 500mm of cable.

BEAM LIGHT

CODE

DESCRIPTION

8050 8051

BIC BIN

hot white LED - 3000K neutral white LED - 4200K 12V dc - IP20

Power per linear meter: 0 4 8 - 4,8W 1 4 4 - 14,4W 1 9 2 - 19,2W Louver type: T - transparent O - opaline Track length: 0 6 0 - length 600 mm 0 9 0 - length 900 mm 1 2 0 - length 1200 mm 1 5 0 - length 1500 mm

8055 8056

BIC BIN

hot white LED - 3000K neutral white LED - 4200K 12V dc - IP20 Power per linear meter: 0 4 8 - 4,8W 1 4 4 - 14,4W 1 9 2 - 19,2W Louver type: T - transparent O - opaline Track length: 0 6 0 - length 600 mm 0 9 0 - length 900 mm 1 2 0 - length 1200 mm 1 5 0 - length 1500 mm

8050 - 8051

16 ACCESSORIES 413 414 419 821

12V - 12W - IP20 ballast 12V - 25W - IP20 ballast 12V - 60W - IP20 ballast Fixing system for codes 8050 - 8051 - 8055 - 8056 8055 - 8056

Size (mm)

33 anodised natural NOTE

606

BEAM LIGHT

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

CODE

DESCRIPTION

8060 8061

BIC BIN

hot white LED - 3000K neutral white LED - 4200K 12V dc - IP20

8065 8066

BIC BIN

8060 - 8061

19 ACCESSORIES 12V - 12W - IP20 ballast 12V - 25W - IP20 ballast 12V - 60W - IP20 ballast Fixing system for codes 8060 - 8061 8065 - 8066 22 12

413 414 419 822

Size (mm)

33 anodised natural NOTE

607

Fixed and adjustable luminaire for wall and ceiling mounting, with LED lighting system. Ballast not included. Luminaire housing: aluminium Louver: lapped pyrex glass

KLES

CODE

DESCRIPTION

Single emission - White light projection 1360 BIC 30 30° beam, hot white LED - 3000K 1360 BIN 30 30° beam, neutral white LED - 4200K 1 LED - 1W - 350 mA 230V - 50Hz Colour: 14 - 33 - 53 IP 54 Kg 0.16 Ballast to be ordered separately

Double emission - White light projection 30° beam, hot white LED - 3000K 30° beam, neutral white LED - 4200K 2 LED - 1W - 350 mA 230V - 50Hz Colour: 14 - 33 - 53 IP 54 Kg 0.28

Ø40

122

1361 BIC 30 1361 BIN 30

Ballast to be ordered separately Ø40

g 50

350° 50

350° adjustable single emission White light projection 1380 BIC 30 30° beam, hot white LED - 3000K 1380 BIN 30 30° beam, neutral white LED - 4200K 1 LED - 1W - 350 mA 230V - 50Hz Colour: 14 - 33 - 53 IP 40 Kg 0.30 Ballast to be ordered separately

g 80

1381 BIC 30 1381 BIN 30

350° adjustable double emission White light projection 30° beam, hot white LED - 3000K 30° beam, neutral white LED - 4200K 2 LED - 1W - 350 mA 230V - 50Hz Colour: 14 - 33 - 53 IP 40 Kg 0.40

350° 50

Ballast to be ordered separately

Size (mm)

14 chrome 33 anodised natural 53 anodised black NOTE

610

Ballasts.

KLES

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

LED ballast from 190 to 265V AC - 350 mA 230V - 50Hz IP 40 Series connection for: max 4 luminaires code 1361 - 1381 max 9 luminaires code 1360 - 1380

LED ballast from 190 to 265V AC - 350 mA 230V - 50Hz IP 20 Series connection for: max 1 luminaire code 1361 - 1381 max 2 luminaires code 1360 - 1380

117 28

441

Size (mm)

DESCRIPTION

CODE

51 18

440

CONNECTION EXAMPLES Maximum connection of 1 double-emission luminaires

230V - 50Hz

Maximum connection of 2 single-emission luminaires

230V - 50Hz

Maximum connection of 4 double-emission luminaires

230V - 50Hz

Maximum connection of 9 single-emission luminaires

230V - 50Hz

611

Recessed luminaire for wall, ceiling, floor with LED lighting system. Ballast not included. Luminaire housing: stainless steel painted or anodized. 350 mA stabilised DC power supply.

MICROLIGHT

1502 BIC 1502 BIN 1503 BIC 1503 BIN

1504 BIC 1504 BIN 1505 BIC 1505 BIN

Ø20

With cross projection hot white LED - 3000K neutral white LED - 4200K 1 LED - 1W – 350mA max Colour: 01 - 02 - 14 - 33 IP 40 Ballast to be ordered separately F

Ø20

Single emission - hot white LED - 3000K Single emission - neutral white LED - 4200K Double emission - hot white LED - 3000K Double emission - neutral white LED - 4200K 1 LED - 1W – 350mA max Colour: 01 - 02 - 14 - 33 IP 40 Ballast to be ordered separately F

1506 BIC 1506 BIN

Size (mm)

1500 BIC 1500 BIN 1501 BIC 1501 BIN

DESCRIPTION

Ø20

CODE

Ø20

ACCESSORIES 806 440 441 802 807 809 819 807

Adapter for installation on branch boxes Ballast IP20 350mA - connection of up to 2 luminaires Ballast IP20 350mA - connection of up to 9 luminaires Aluminium recessed box for installation in brick walls (only for internal) Adhesive decor frame for code 1500, 1501 Adhesive decor frame for code 1502, 1503 Adhesive decor frame for code 1504, 1505 Adhesive decor frame for code 1506

01 white 02 black 14 chrome 33 anodised natural NOTE

614

Recessed luminaire for wall, ceiling, floor with LED lighting system. Ballast not included. Luminaire housing: painted or anodized aluminum. 350 mA stabilised DC power supply.

MICROLIGHT

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

CODE 1510 BIC 1510 BIN

DESCRIPTION hot white LED - 3000K neutral white LED - 4200K 1 LED - 1W – 350mA max Colour: 01 - 02 - 14 - 33 IP 40 Ballast to be ordered separately

1511 BIC 1511 BIN

Size (mm)

hot white LED - 3000K neutral white LED - 4200K 1 LED - 1W – 350mA max Colour: 01 - 02 - 14 - 33 IP 40 Ballast to be ordered separately

Ø20

25 40

Ø20

ø38

Ø28

Projection with lens 1513 BIC 30 30° beam, hot white LED - 3000K 1513 BIN 30 30° beam, neutral white LED - 4200K 1 LED - 1W – 350mA max Colour: 01 - 02 - 14 - 33 IP 40 Ballast to be ordered separately F

Projection with lens 1512 BIC 30 30° beam, hot white LED - 3000K 1512 BIN 30 30° beam, neutral white LED - 4200K 1 LED - 1W – 350mA max Colour: 01 - 02 - 14 - 33 IP 40 Ballast to be ordered separately

ø25

Ø28

ACCESSORIES 805 440 441 803 802

Adapter for installation on branch boxes Ballast IP20 350mA - connection of up to 2 luminaires Ballast IP20 350mA - connection of up to 9 luminaires Aluminium recessed box for installation in brick walls (only for codes 1512-1513 - indoor use only) Aluminium recessed box for installation in brick walls (only for codes 1510-1511 - indoor use only)

01 white 02 black 14 chrome 33 anodised natural NOTE

615

Recessed luminaire for wall, ceiling, floor with LED lighting system. Ballast not included. Luminaire housing: stainless steel painted or anodized. 350 mA stabilised DC power supply.

CODE 1522 BIC 1522 BIN

DESCRIPTION hot white LED - 3000K neutral white LED - 4200K 1 LED - 1W – 350mA max Colour: 52 IP 67 500 Kg static load Ballast to be ordered separately Supplied with 25 cm H05RN-F 2x1 mm2 output cable F

1524 BIC 1524 BIN

Con palpebra hot white LED - 3000K neutral white LED - 4200K 1 white LED - 1W - 350mA max Colour: 52 IP 67 Ballast to be ordered separately Supplied with 25 cm H05RN-F 2x1 mm2 output cable F

Size (mm)

ø38

Ø27

ø38

Ø27

800

ø125

ACCESSORIES 800 801 440 441

Plastic recessed box Aluminium recessed box for installation in brick walls (indoor use only) Ballast IP20 350mA - connection of up to 2 luminaires Ballast IP20 350mA - connection of up to 9 luminaires 100 Size (mm)

52 stainless steel NOTE

616

Recessed luminaire for wall, ceiling, floor with LED lighting system. Ballast not included. Luminaire housing: stainless steel painted or anodized. 350 mA stabilised DC power supply.

MICROLIGHT

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

1520 BIC 1520 BIN

DESCRIPTION hot white LED - 3000K neutral white LED - 4200K 1 white LED - 1W - 350mA max Colour: 52 IP 67 Ballast to be ordered separately Supplied with 25 cm H05RN-F 2x1 mm2 output cable

1521 BIC 1521 BIN

hot white LED - 3000K neutral white LED - 4200K 1 white LED - 1W - 350mA max Colour: 52 IP 67 Ballast to be ordered separately Supplied with 25 cm H05RN-F 2x1 mm2 output cable

Size (mm)

ø38

Ø27

CODE

Ø27

800

ø125

ACCESSORIES 800 801 440 441

52 stainless steel NOTE

617

Floor-mounted recessed luminaire with LED light sources. Frame of anodised aluminium with front louver in tempered glass (15 mm thick) and anti-slip external finish. Provided with H05RN-F 2x1 mm2 cable, 300 mm long for the white LED version, H05RN-F 4x0,5 mm2 300 mm long for the RGB LED version.

TYLE

Module 100 x 100 mm 1600 BIC 33 hot white LED - 3000K 1600 BIN 33 neutral white LED - 4200K 1600 RGB 33 RGB LED 12 LED smd 1W total - 12V - white LEDs 9 LED smd 2,2W total - 12V - RGB LEDs IP 67 IK08 mechanical shocks 2000 Kg static load Provided with H05RN-F 2x1 mm2 cable (white LEDs), H05RN-F 4x0,5 mm2 (RGB LEDs) - cable length 300 mm

Size (mm)

g 100

DESCRIPTION

CODE

100

Ballast to be ordered separately

g 200

Module 200 x 200 mm 1601 BIC 33 hot white LED - 3000K 1601 BIN 33 neutral white LED - 4200K 1601 RGB 33 RGB LED 54 LED smd 4,3W total - 12V - white LEDs 54 LED smd 13W total - 12V - RGB LEDs IP 67 IK08 mechanical shocks 2000 Kg static load Provided with H05RN-F 2x1 mm2 cable (white LEDs), H05RN-F 4x0,5 mm2 (RGB LEDs) - cable length 300 mm

200

Ballast to be ordered separately

g 300

Module 300 x 300 mm 1602 BIC 33 hot white LED - 3000K 1602 BIN 33 neutral white LED - 4200K 1602 RGB 33 RGB LED 135 LED smd 10,8W total - 12V - white LEDs 135 LED smd 32,2W total - 12V - RGB LEDs IP 67 IK08 mechanical shocks 2000 Kg static load Provided with H05RN-F 2x1 mm2 cable (white LEDs), H05RN-F 4x0,5 mm2 (RGB LEDs) - cable length 300 mm

300

Ballast to be ordered separately

500 104

104

501 502 503

Recessed box of stainless steel for code 1600 (A= 140 - B= 140 - C= 100 mm) Recessed box of stainless steel for code 1601 (A= 254 - B= 254 - C= 100 mm) Recessed box of stainless steel for code 1602 (A= 304 - B= 304 - C= 100 mm) Recessed box of stainless steel for code 1603 (A= 404 - B= 404 - C= 100 mm)

501, 502, 503

500

ACCESSORIES

A Size (mm)

618

TYLE

DESIGN - STEFANO DALLâ&#x20AC;&#x2122;OSSO

Module 250 x 60 mm 1604 BIC 33 hot white LED - 3000K 1604 BIN 33 neutral white LED - 4500K 1604 RGB 33 RGB LED 24 LED smd 2W total - 12V - white LEDs 24 LED smd 5,8W total - 12V - RGB LEDs IP 67 IK08 mechanical shocks 2000 Kg static load Provided with H05RN-F 2x1 mm2 cable (white LEDs), H05RN-F 4x0,5 mm2 (RGB LEDs) - cable length 300 mm

Size (mm)

g 60

DESCRIPTION

CODE

250

Ballast to be ordered separately

g 60

Module 300 x 60 mm 1605 BIC 33 hot white LED - 3000K 1605 BIN 33 neutral white LED - 4500K 1605 RGB 33 RGB LED 30 LED smd 2,4W total - 12V - white LEDs 30 LED smd 7,3W total - 12V - RGB LEDs IP 67 IK08 mechanical shocks 2000 Kg static load Provided with H05RN-F 2x1 mm2 cable (white LEDs), H05RN-F 4x0,5 mm2 (RGB LEDs) - cable length 300 mm

300

Ballast to be ordered separately

g 60

Module 400 x 60 mm 1606 BIC 33 hot white LED - 3000K 1606 BIN 33 neutral white LED - 4500K 1606 RGB 33 RGB LED 42 LED smd 3,4W total - 12V - white LEDs 42 LED smd 10,1W total - 12V - RGB LEDs IP 67 IK08 mechanical shocks 2000 Kg static load Provided with H05RN-F 2x1 mm2 cable (white LEDs), H05RN-F 4x0,5 mm2 (RGB LEDs) - cable length 300 mm

400

Ballast to be ordered separately F

g 45 60

Module 500 x 60 mm 1607 BIC 33 hot white LED - 3000K 1607 BIN 33 neutral white LED - 4500K 1607 RGB 33 RGB LED 54 LED smd 4,4W total - 12V - white LEDs 54 LED smd 12,1W total - 12V - RGB LEDs IP 67 IK08 mechanical shocks 2000 Kg static load Provided with H05RN-F 2x1 mm2 cable (white LEDs), H05RN-F 4x0,5 mm2 (RGB LEDs) - cable length 300 mm

500

Ballast to be ordered separately

ACCESSORIES

505 506 507

Recessed box of stainless steel for code 1604 (A= 64 - B= 254 - C= 100 mm) Recessed box of stainless steel for code 1605 (A= 64 - B= 304 - C= 100 mm) Recessed box of stainless steel for code 1606 (A= 64 - B= 404 - C= 100 mm) Recessed box of stainless steel for code1607 (A= 64 - B= 504 - C= 100 mm)

504

Size (mm)

619

TYLE

DESIGN - STEFANO DALLâ&#x20AC;&#x2122;OSSO

DESCRIPTION

Module 750 x 60 mm 1608 BIC 33 hot white LED - 3000K 1608 BIN 33 neutral white LED - 4200K 1608 RGB 33 RGB LED 84 LED smd 6,8W total - 12V - white LEDs 84 LED smd 20,1W total - 12V - RGB LEDs IP 67 IK08 mechanical shocks 2000 Kg static load Provided with H05RN-F 2x1 mm2 cable (white LEDs), H05RN-F 4x0,5 mm2 (RGB LEDs) - cable length 300 mm

Size (mm)

g 45 60

CODE

750

Ballast to be ordered separately F

g 45 60

Module 1000 x 60 mm 1609 BIC 33 hot white LED - 3000K 1609 BIN 33 neutral white LED - 4200K 1609 RGB 33 RGB LED 114 LED smd 9,2W totale- 12V - white LEDs 114 LED smd 27,3W total - 12V - RGB LEDs IP 67 IK08 mechanical shocks 2000 Kg static load Provided with H05RN-F 2x1 mm2 cable (white LEDs), H05RN-F 4x0,5 mm2 (RGB LEDs) - cable length 300 mm

1000

Ballast to be ordered separately

509

Recessed box of stainless steel for code 1608 (A= 64 - B= 754 - C= 100 mm) Recessed box of stainless steel for code 1609 (A= 64 - B= 1000 - C= 100 mm)

ACCESSORIES 508

A Size (mm)

620

1613 BIC 33 1613 BIN 33 1613 RGB 33

Module diameter 300 mm hot white LED - 3000K neutral white LED - 4200K RGB LED 183 LED smd 14,8W totale - 12V - white LEDs 183 LED smd 43,8W totale - 12V - RGB LEDs IP 67 IK08 mechanical shocks 2000 Kg static load Fornito completo di cavo H05RN-F 2x1 mm2 (led bianchi), H05RN-F 4x0,5 mm2 (led RGB) - lunghezza cavi 300 mm Ballast to be ordered separately

100 45

g 200

200

300

400

510

510 511 512 513

622

Recessed box of stainless steel for code 1610 (A= ø 104 - B= 100) Recessed box of stainless steel for code 1611 (A= ø 204 - B= 100) Recessed box of stainless steel for code 1612 (A= ø 304 - B= 100) Recessed box of stainless steel for code 1613 (A= ø 404 - B= 100)

104 B

ACCESSORIES

511, 512, 513

A Size (mm)

Module diameter 300 mm 1612 BIC 33 hot white LED - 3000K 1612 BIN 33 neutral white LED - 4200K 1612 RGB 33 RGB LED 87 LED smd 7W totale – 12V - white LEDs 87 LED smd 20,8W totale – 12V - RGB LEDs IP 67 IK08 mechanical shocks 2000 Kg static load Fornito completo di cavo H05RN-F 2x1 mm2 (led bianchi), H05RN-F 4x0,5 mm2 (led RGB) - lunghezza cavi 300 mm Ballast to be ordered separately

100

Module diameter 200 mm hot white LED - 3000K neutral white LED - 4200K RGB LED 39 LED smd 3,2W totale - 12V - white LEDs 39 LED smd 9,4W totale - 12V - RGB LEDs IP 67 IK08 mechanical shocks 2000 Kg static load Fornito completo di cavo H05RN-F 2x1 mm2 (led bianchi), H05RN-F 4x0,5 mm2 (led RGB) - lunghezza cavi 300 mm Ballast to be ordered separately

300

1611 BIC 33 1611 BIN 33 1611 RGB 33

Module diameter 100 mm 1610 BIC 33 hot white LED - 3000K 1610 BIN 33 neutral white LED - 4200K 1610 RGB 33 RGB LED 15 LED smd 1,2W total - 12V - white LEDs 15 LED smd 3,6W total - 12V - RGB LEDs IP 67 IK08 mechanical shocks 2000 Kg static load Provided with H05RN-F 2x1 mm2 cable (white LEDs), H05RN-F 4x0,5 mm2 (RGB LEDs) - cable length 300 mm Ballast to be ordered separately

Size (mm)

400

DESCRIPTION

CODE

Ballasts

TYLE

DESIGN - STEFANO DALLâ&#x20AC;&#x2122;OSSO

CODE

Size (mm)

DESCRIPTION

The ballast cannot be placed into the recessed box with the luminaire. A remote box must be provided instead.

Ballast 12V - 12W - IP20

413

23 90

Ballast 12V - 25W - IP20

g 97

414

Ballast 12V -60W - IP20

g 97

419

160

Ballast for RGB LEDs 12V - 50W - IP40 F

454

g 147

623

Wall-mounted and floor-mounted adjustable projector with LED light sources. Ballast not included. Luminaire housing: stainless steel. 350 mA steady current power supply.

PAK

CODE 1526 BIC 1526 BIN

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

DESCRIPTION hot white LED - 3000K neutral white LED - 4200K 1 LED - 1W – 350mA max 40° beam opening Colour: grey anodised IP 65 Kg 0,180

White

Ballast to be ordered separately

105 Size (mm)

ACCESSORIES 865 440 441

Garden peg Ballast IP20 350mA - connection of up to 2 luminaires Ballast IP20 350mA - connection of up to 9 luminaires

Anodised inox NOTE

626

Adjustable projector for outdoor installation – floor, wall or ceilingmounted – with LED light sources. Luminaire housing: aluminum with front protection louver in tempered glass. Equipped with electronic ballast.

MP1

CODE

DESCRIPTION hot white LED - 3000K neutral white LED - 4200K 9 LED - 18 W - 500 mA max 230V - 50Hz Colour: 18 - 21 IP 65 Kg 1,70

160

1530 BIC 1530 BIN

DESIGN - ARCHITECT MARCO PIERI

180

Size (mm)

ACCESSORIES 867

Garden peg

18 gray 21 copper NOTE

627

628_631_BRICK_LED_11_ITA:628_631_BRICK_LED_11_ITA

11-11-2011

16:07

Pagina 630

Wall mounted luminaire with LED light sources. Luminaire housing: aluminum with front protection louver in tempered glass with satin finish. Ballast to be ordered separately.

BRICK

CODE

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

DESCRIPTION hot white LED - 3000K neutral white LED - 4200K 1 LED - 1W - 350/500 mA max Colour: 01 - 18 IP 40

2550 BIC 2550 BIN

Wall mounting is possible only with recessed box type 501.

ACCESSORIES Ballast IP20 350mA - connection of up to 2 luminaires Ballast IP20 350mA - connection of up to 9 luminaires

440 441

110

Size (mm)

01 white 18 gray NOTE

630

Ground-recessed luminaire with LED light sources. Coated die-cast aluminium structure. Stainless steel outer ring. Protection louver in tempered glass (10 mm). Silicone material gaskets. Ballast not included. Supplied with 2 H07RN-F cable 4x1.0 mm2.

ROUND HILL - SQUARE HILL

CODE

DESCRIPTION

1444 RGB

Round Hill RGB - RGB technology 3 LED - 1W - 350 mA max Colour: stainless steel IP 67 - IP 65 IK08 mechanical shocks 2000 Kg static load Supplied with 2 H07RN-F cable 4x1.0 mm2. Ballast to be ordered separately

463

Ballast 190/265V ac - 50/60 Hz max 9 luminaires

The ballast cannot be placed into the recessed box with the luminaire. A remote box must be provided instead.

ACCESSORIES

Round Hill

Recessed box in coated die-cast aluminium for Round Hill

993

140

Round Hill - 993 Ă&#x2DC;135

116

140

Ă&#x2DC;135

274

632

274

Size (mm)

The bottom of the recessed box in perforated sheet prevents water accumulation.

ROUND HILL SQUARE HILL DESIGN - QUATTROBI TECHNICAL DEPARTMENT

CODE

DESCRIPTION

1464 RGB

Square Hill RGB - RGB technology 3 LED - 1W - 350 mA max Colour: stainless steel IP 67 - IP 65 IK08 mechanical shocks 2000 Kg static load Supplied with 2 H07RN-F cable 4x1.0 mm2. Ballast to be ordered separately

463

Ballast 190/265V ac - 50/60 Hz max 9 luminaires

The ballast cannot be placed into the recessed box with the luminaire. A remote box must be provided instead.

ACCESSORIES

Square Hill

Recessed box in coated die-cast aluminium for Square Hill

140

994

140

Square Hill - 994 135

116

140

135

274

Size (mm)

The bottom of the recessed box in perforated sheet prevents water accumulation.

633

CODE

DESCRIPTION Mini Round Hill for white light projection 10° beam, hot white LED - 3000K 25° beam, hot white LED - 3000K 45° beam, hot white LED - 3000K 10° beam, neutral white LED - 4200K 25° beam, neutral white LED - 4200K 45° beam, neutral white LED - 4200K 1 LED - 1W - 350 mA max Colour: stainless steel IP 67 - IP 65

1402 BIC 10 1402 BIC 25 1402 BIC 45 1402 BIN 10 1402 BIN 25 1402 BIN 45

Round Hill for white light projection 10° beam, hot white LED - 3000K 25° beam, hot white LED - 3000K 45° beam, hot white LED - 3000K 10° beam, neutral white LED - 4200K 25° beam, neutral white LED - 4200K 45° beam, neutral white LED - 4200K 3 LED - 1W - 350 mA max Colour: stainless steel IP 67 - IP 65

1446 BIC 10 1446 BIC 25 1446 BIC 45 1446 BIN 10 1446 BIN 25 1446 BIN 45

White

Ballast 190/265V ac - 50/60 Hz - IP 65 max 3 luminaires 1446 max 9 luminaires 1402

464

Mini Round Hill

The ballast cannot be placed into the recessed box with the luminaire. A remote box must be provided instead.

Round Hill

ACCESSORIES Electrical series connection of one or multiple luminaires - IP 68 Luminaire connection - IP 68 Electrical series connection of multiple luminaires - IP 68 Recessed box in coated die-cast aluminium for Mini Round Hill Recessed box in coated die-cast aluminium for Round Hill

Ø85 Ø140

140

944 945 949 991 993

Mini Round Hill - 991

166

Ø135

170

Ø135

116

Ø80

106

Ø80

Round Hill - 993

120 274

120

274

949 - For code 1402

115

634

945 30

944 - For code 1446 - 1445 85

The bottom of the recessed box in perforated sheet prevents water accumulation.

Size (mm)

115 30

ROUND HILL SQUARE HILL DESIGN - QUATTROBI TECHNICAL DEPARTMENT

CODE

DESCRIPTION Mini Square Hill for white light projection 10° beam, hot white LED - 3000K 25° beam, hot white LED - 3000K 45° beam, hot white LED - 3000K 10° beam, neutral white LED - 4200K 25° beam, neutral white LED - 4200K 45° beam, neutral white LED - 4200K 1 LED - 1W - 350 mA max Colour: stainless steel IP 67 - IP 65

1422 BIC 10 1422 BIC 25 1422 BIC 45 1422 BIN 10 1422 BIN 25 1422 BIN 45

Square Hill for white light projection 10° beam, hot white LED - 3000K 25° beam, hot white LED - 3000K 45° beam, hot white LED - 3000K 10° beam, neutral white LED - 4200K 25° beam, neutral white LED - 4200K 45° beam, neutral white LED - 4200K 3 LED - 1W - 350 mA max Colour: stainless steel IP 67 - IP 65

1466 BIC 10 1466 BIC 25 1466 BIC 45 1466 BIN 10 1466 BIN 25 1466 BIN 45

White

Ballast 190/265V ac - 50/60 Hz - IP 65 max 3 luminaires 1446 max 9 luminaires 1402

464

Mini Square Hill

Square Hill

140

The ballast cannot be placed into the recessed box with the luminaire. A remote box must be provided instead.

ACCESSORIES Electrical series connection of one or multiple luminaires - IP 68 Luminaire connection - IP 68 Electrical series connection of multiple luminaires - IP 68 Recessed box in coated die-cast aluminium for Mini Square Hill Recessed box in coated die-cast aluminium for Square Hill

85 140

140

944 945 949 992 994

Mini Square Hill - 992

166

Ø135

170

Ø135

116

Ø80

120 274

274

120

949 - For code 1422 70

274

944 - For code 1466 - 1465

945 30

The bottom of the recessed box in perforated sheet prevents water accumulation.

106

Ø80

Square Hill - 994

115 Size (mm)

115 30

635

ALIAS LED

636

Wall-mounted, floor-mounted and false ceiling-mounted recessed luminaire with LED lighting system. Structure built in nylon. Silicone material gaskets. Ballast not included. Stainless steel or die-cast aluminium outer ring. Protection louver in tempered glass (10 mm).

ALIAS LED

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

CODE

DESCRIPTION Stainless steel outer ring version white LED 16 LED - 2,4W - 12Vdc Colour: stainless steel IP 67 - IP 65

1455

White

Die-cast aluminium outer ring version white LED 16 LED - 2,4W - 12Vdc Colour: 18 - 19 - 21 IP 67 - IP 65

1456

White

Die-cast aluminium eyelid cover version white LED 16 LED - 2,4W - 12Vdc Colour: 18 - 19 - 21 IP 67 - IP 65

1457

White

Blue

Red

Blue

Red

Blue

Red

ACCESSORIES Recessed box Recessed mounting installation kit 12V - 12W ballast - IP20 12V - 25W ballast - IP20 12V - 60W ballast - IP20

419

997 90

1457

414

1455 - 1456

413

997 939 413 414 419

99 140

Size (mm)

126 67

140

160

stainless steel 18 grey 19 anthracite grey 21 copper NOTE

637

Floor-mounted recessed luminaire with LED light sources. Anodised extruded aluminium profile structure. Louver in tempered glass (8 mm). Silicone material gaskets. Ballast not included.

TRACCIA LED

CODE

DESCRIPTION Module 500 mm for white light projection F g 10° beam, neutral white LED - 4200K 20° beam, neutral white LED - 4200K 30° beam, neutral white LED - 4200K 10°x 40° beam, neutral white LED - 4200K 10° beam, hot white LED - 3000K 20° beam, hot white LED - 3000K 30° beam, hot white LED - 3000K 10°x 40° beam, hot white LED - 3000K 9 LED - 12,6W total - 12Vdc Colour: 33 - IP 67 - IK09 - 1000 kg static load Ballast to be ordered separately. Provided with length of cable 1000 mm HO7RN-F 2x1 mm2, black

2640 BIN 10 2640 BIN 20 2640 BIN 30 2640 BIN ET 2640 BIC 10 2640 BIC 20 2640 BIC 30 2640 BIC ET

Module 1000 mmfor white light projection F g 10° beam, neutral white LED - 4200K 20° beam, neutral white LED - 4200K 30° beam, neutral white LED - 4200K 10°x 40° beam, neutral white LED - 4200K 10° beam, hot white LED - 3000K 20° beam, hot white LED - 3000K 30° beam, hot white LED - 3000K 10°x 40° beam, hot white LED - 3000K 18 LED - 25,2W total - 12Vdc Colour: 33 - IP 67 - IK09 - 1000 kg static load Ballast to be ordered separately. Provided with length of cable 1000 mm HO7RN-F 2x1 mm2, black

Galvanised steel recessed box For code 2640 For code 2641 For code 2642

976 977 988

Galvanised steel structure for false-ceilings For code 2640 For code 2641 For code 2642

Recessed box

Frame

Size (mm)

414

419

160

33 anodised natural NOTE

642

946 947 983

110

B 500 1000 1514

ACCESSORIES

A 576 1076 1590

12V - 25W ballast 12V - 60W ballast

414 419

module length 2640 2641 2642

Module 1500 mm for white light projection F g 10° beam, neutral white LED - 4200K 20° beam, neutral white LED - 4200K 30° beam, neutral white LED - 4200K 10°x 40° beam, neutral white LED - 4200K 10° beam, hot white LED - 3000K 20° beam, hot white LED - 3000K 30° beam, hot white LED - 3000K 10°x 40° beam, hot white LED - 3000K 27 LED - 37,8W total - 12Vdc Colour: 33 - IP 67 - IK09 - 1000 kg static load Ballast to be ordered separately. Provided with length of cable 1000 mm HO7RN-F 2x1 mm2, black

2642 BIN 10 2642 BIN 20 2642 BIN 30 2642 BIN ET 2642 BIC 10 2642 BIC 20 2642 BIC 30 2642 BIC ET

2641 BIN 10 2641 BIN 20 2641 BIN 30 2641 BIN ET 2641 BIC 10 2641 BIC 20 2641 BIC 30 2641 BIC ET

Floor-mounted recessed luminaire with LED light sources. Anodised extruded aluminium profile structure. Louver in tempered glass (5 mm). Silicone material gaskets. Ballast not included.

TRACCIA LED

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

CODE

DESCRIPTION Modulo 500 mm for white light projection F g 10° beam, neutral white LED - 4200K 20° beam, neutral white LED - 4200K 30° beam, neutral white LED - 4200K 10°x 40° beam, neutral white LED - 4200K 10° beam, hot white LED - 3000K 20° beam, hot white LED - 3000K 30° beam, hot white LED - 3000K 10°x 40° beam, hot white LED - 3000K 9 LED - 12,6W total - 12Vdc Colour: 33 - IP 67 Ballast to be ordered separately. Provided with length of cable 1000 mm HO5RN-F 2x1 mm2, black

6020 BIN 10 6020 BIN 20 6020 BIN 30 6020 BIN ET 6020 BIC 10 6020 BIC 20 6020 BIC 30 6020 BIC ET

Modulo 1000 mm for white light projection F g 10° beam, neutral white LED - 4200K 20° beam, neutral white LED - 4200K 30° beam, neutral white LED - 4200K 10°x 40° beam, neutral white LED - 4200K 10° beam, hot white LED - 3000K 20° beam, hot white LED - 3000K 30° beam, hot white LED - 3000K 10°x 40° beam, hot white LED - 3000K 18 LED - 25,2W total - 12Vdc Colour: 33 - IP 67 Ballast to be ordered separately. Provided with length of cable 1000 mm HO5RN-F 2x1 mm2, black Modulo 1500 mm for white light projection F g 10° beam, neutral white LED - 4200K 20° beam, neutral white LED - 4200K 30° beam, neutral white LED - 4200K 10°x 40° beam, neutral white LED - 4200K 10° beam, hot white LED - 3000K 20° beam, hot white LED - 3000K 30° beam, hot white LED - 3000K 10°x 40° beam, hot white LED - 3000K 27 LED - 37,8W total - 12Vdc Colour: 33 - IP 67 Ballast to be ordered separately. Provided with length of cable 1000 mm HO5RN-F 2x1 mm2, black

6022 BIN 10 6022 BIN 20 6022 BIN 30 6022 BIN ET 6022 BIC 10 6022 BIC 20 6022 BIC 30 6022 BIC ET

12V - 25W ballast 12V - 60W ballast

414 419

module length 6020 6021 6022

A 500 1000 1502

6021 BIN 10 6021 BIN 20 6021 BIN 30 6021 BIN ET 6021 BIC 10 6021 BIC 20 6021 BIC 30 6021 BIC ET

85 Size (mm)

414

419

Brackets 1 bracket for wall mounting 2 brackets for ceiling mounting 2 adjustable brackets for wall mounting

840

842

841

841 842 984

160 38

High-bay mounting kit 2 steel supporting cables with jack Complete with ceiling rose (length of cables: 2100 mm)

840

ACCESSORIES

984

33 anodised natural NOTE

643

Floor-mounted recessed luminaire with LED light sources. RGB technology. Anodised extruded aluminium profile structure. Louver in tempered glass (8 mm). Silicone material gaskets. Ballast not included.

CODE

DESCRIPTION

2640 RGB LED

Module 500 mm 9 LED - 1W - 350 mA Colour: 33 - IP 67 - IK09 - 1000 kg static load - Kg 6.00 Ballast to be ordered separately Provided with length of cable 1000mm FROR 7x1mm2

2641 RGB LED

Module 1000 mm F 18 LED - 1W - 350 mA Colour: 33 - IP 67 - IK09 - 1000 kg static load - Kg 6.00 Ballast to be ordered separately Provided with length of cable 1000mm HO7RN-F 4x1mm2

2642 RGB LED

Module 1500 mm F 27 LED - 1W - 350 mA Colour: 33 - IP 67 - IK09 - 1000 kg static load - Kg 6.00 Ballast to be ordered separately Provided with length of cable 1500mm HO7RN-F 4x1mm2

450

Remote control It allows to switch on and off and to adjust the light intensity of the colour flow

451

RGB LED ballast from 190V to 256V AC - 350 mA IP 40

Maximum connection of 3 luminaires code 2640 Rgb Maximum connection of 1 luminaires code 2641 Rgb Maximum connection of 1 luminaires code 2642 Rgb

module length 2640 RGB LED 2641 RGB LED 2642 RGB LED

Receiver plus control for RGB Led

452

DMX 512 control unit Max 6 channels

453

DMX interface

455

110

Maximum connection of 25 ballasts for LED Rgb code 451

Size (mm)

Maximum connection of 25 ballasts for LED Rgb code 451

ACCESSORIES 946 947 983

Galvanised steel recessed box For code 2640 RGB LED For code 2641 RGB LED For code 2642 RGB LED

976 977 988

Galvanised steel structure for false-ceilings For code 2640 RGB LED For code 2641 RGB LED For code 2642 RGB LED

Recessed box

Frame

33 anodised natural NOTE

644

A 576 1076 1590

B 500 1000 1514

Floor-mounted recessed luminaire with LED light sources. RGB technology. Anodised extruded aluminium profile structure. Louver in tempered glass (5 mm). Silicone material gaskets. Ballast not included.

TRACCIA LED

DESIGN - QUATTROBI TECHNICAL DEPARTMENT

CODE

DESCRIPTION

6020 RGB LED

Module 500 mm F g 9 LED - 1W Colour: 33 - IP 67 - Kg 6.00 Ballast to be ordered separately Provided with length of cable 2000mm FROR 7x1mm2 gray F g Module 1000 mm 18 LED - 1W Colour: 33 - IP 67 - Kg 6.00 Ballast to be ordered separately Provided with length of cable 2000mm FROR 4x1mm2 gray

6021 RGB LED

6022 RGB LED

Module 1500 mm F g 27 LED - 1W Colour: 33 - IP 67 - Kg 6.00 Ballast to be ordered separately Provided with length of cable 2000mm FROR 4x1mm2 gray

450

Remote control It allows to switch on and off and to adjust the light intensity of the colour flow

451

RGB LED ballast from 190V to 256V AC - 350 mA IP 40

Maximum connection of 3 luminaires code 6020 Rgb Maximum connection of 1 luminaires code 6021 Rgb Maximum connection of 1 luminaires code 6022 Rgb

module length 6020 RGB LED 6021 RGB LED 6022 RGB LED

Maximum connection of 25 ballasts for LED Rgb code 451 453

DMX 512 control unit Max 6 channels

455

DMX interface

88.5

Receiver plus control for RGB Led

452

A 500 1000 1502

85 Size (mm)

Maximum connection of 25 ballasts for LED Rgb code 451 For ballasts and control units, see page 477

ACCESSORIES 840

High-bay mounting kit 2 steel supporting cables with jack Power supply cable with ceiling rose (length of cables: 2100 mm)

841 842 984

Brackets 1 bracket for wall mounting 2 brackets for ceiling mounting 2 adjustable brackets for wall mounting

840

842

841

984

33 anodised natural NOTE

645

Floor-mounted, wall-mounted, pole-mounted, adjustable projector with LED light sources. Luminaire housing: die-cast aluminium. Silicone material gaskets. It comes complete with electronic ballast. Front louver in tempered glass.

NUT LED

CODE 2739 BIF

DESCRIPTION NUT Small 18 white-light LEDs - 25W - 6300K 230V - 50Hz Colour: 19 IP 65

389

F 102 g

185

249

Size (mm)

19 anthracite All luminaires are equipped with electronic ballasts. NOTE

648

Brackets for pole head mounting.

NUT LED

DESIGN - STEFANO DALLâ&#x20AC;&#x2122;OSSO

CODE

DESCRIPTION

Size (mm)

Bracket for pole head mounting Single bracket for one spotlight Pole head mounting Steel sheet with epoxy polyester coat finish Stainless steel screws Colour: 19

300

192

372

CODE

301

210

320

210

280

380

430

NUT Small Single support, short Single support, medium Single support, long

320 300 301

521

DESCRIPTION

Size (mm)

Bracket for pole head mounting Double support for two spotlights Pole head mounting Steel sheet with epoxy polyester coat finish Stainless steel screws - Colour: 19 NUT Small Double support, short Double support, medium Double support, long

280

380

322 304 305

304 210

210

322

443

430

383

210

305

1043

19 antracite NOTE

649

Brackets for intermediate pole mounting. Wall mounting brackets. Brackets for angular mounting.

CODE

DESCRIPTION

Size (mm)

430

NUT Small Single support, medium Single support, long

380

308 309

3000

Bracket for intermediate pole mounting Single bracket for one spotlight Intermediate mounting Steel sheet with epoxy polyester coat finish Stainless steel screws - Colour: 19

397 CODE

309

210

308

547

DESCRIPTION

Size (mm)

Bracket for wall mounting Single bracket for one spotlight Wall mounting Steel sheet with epoxy polyester coat finish Stainless steel screws - Colour: 19

430

NUT Small Single support, medium Single support, long

312

313

210

380

312 313

370

CODE

520

DESCRIPTION

Size (mm)

Bracket for angular mounting Supporto singolo per un punto luce Installazione ad angolo Lamiera in acciaio verniciato in epossipoliestere Viti in acciaio inox - Colori: 19

210

316

466

210

430

NUT Small Single support, medium Single support, long 380

316 317

317

616

19 anthracite NOTES

650

Tapered cone-shaped pole to be mounted directly in the ground or with in-ground recessed plate fixing.

NUT

DESIGN - STEFANO DALL’OSSO

CODE

Direct ground mounting

DESCRIPTION Poles to be mounted directly in the ground Steel with epoxy polyester coat finish The pole is provided with cable slot, earthing connection, electrical equipment slot Colour: 19

894

4 metres above ground

895

6 metres above ground

DESCRIPTION

897

4 metres above ground

898

6 metres above ground

Poles with plate Steel with epoxy polyester coat finish The pole is provided with earthing connection and electrical equipment slot Colour: 19

CODE

Pole 4/6 meters with plate

DESCRIPTION Recessed plate with tie-rods for fixing to the ground Hot-galvanised steel

300

For poles 4 and 6 metres high Ø16

888

D2 260 200 260

888-889

Ø22

H1 4000 6000

H2 500 800

D1 60 60

D2 105 128

19 anthracite NOTES

651

DINAMIS LED

Adjustable wall-mounted luminaire with direct and indirect light for LED light sources. Equipped with ballast. Luminaire housing: die-cast aluminium Silicone material gaskets. Front protection louver in tempered glass. Insulation class: II .

DINAMIS LED

DESIGN - STEFANO DALL’OSSO

RGB technology 7 - 1W LEDs per colour 190/265V ac - 50/60Hz 45° beam opening Colour: 01 - 18 - 19 IP 65 Kg 5.8

106

2800 RGB

DESCRIPTION

336

220

CODE

Size (mm)

01 white 18 grey 19 anthracite NOTE

653

MASTER LEDspot LED lamps

Voltage V

Power W

Beam of light

Fitting

Luminous intensity cd

Colour temp. (°K)

Code

MASTER LED SPOT LV

12V ac - dc 12V ac - dc 12V ac - dc 12V ac - dc 12V ac - dc 12V ac - dc 12V ac - dc 12V ac - dc

10 10 10 10 15 15 15 15

24° 40° 24° 40° 24° 40° 24° 40°

G53 G53 G53 G53 G53 G53 G53 G53

3200 1150 3370 1210 4500 1600

2700 2700 3000 3000 2700 2700 3000 3000

80.24 80.40 81.24 81.40 87.24 87.40 89.24 89.40

Features: • lower energy consumption • retrofittable • lifetime of 45.000 hours • patented intelligent driver • clearly defined beam spread • not dimmable • available 2700K, 3000K • beam angles of 24° and 40° • UV and IR- free light for less heat and protection for heat-sensitive objects • free of mercury and hazardous matarials • lightweight (122 g) to allow for a broad range of applications • dimensions: 60,5 x 111 mm • weight 0.122 g

LED lamps

Voltage V

Power W

Beam of light

Fitting

Luminous intensity cd

Colour temp. (°K)

Code

MASTER LED SPOT LV Dimmerable

12V ac - dc 12V ac - dc 12V ac - dc 12V ac - dc 12V ac - dc 12V ac - dc

7 7 7 7 7 7

25° 40° 25° 40° 25° 40°

GU10 GU10 GU10 GU10 GU10 GU10

1100 430 1400 650 1400 650

2700 2700 3000 3000 4000 4000

75.25 75.40 76.25 76.40 77.25 77.40

Features: • lower energy consumption • LED lamps suitable for simple (retrofit) replacement of halogen lamps (230V - 240V) • available in beam angles of 25° and 40° • available in different color shades of white 2700K, 3000 K, 4000K • dimmable • very good color rendering • temperature range: -20° C to +45° C ambient temperature • suitable for Voltage fluctuations of +/- 10% • suitable for indoor applications in open luminaires (with an open/free air gap of min. 10 mm) • for accent and general lighting (e.g. hotels, shops and office) • dimensions: 81 x 50 mm • weight 0.125 g

654

Product benefits: • long lifetime • warm white light • good light distribution • no IR- and UV radiation • short pay-back period • up to 80% energy saving compared with halogen lamps • lower maintenance cost • transformer compatibility: broad compatibility with existing electronic and electromagnetc halogen transformers (et. 99%; IC controlled transformers are the only potential exception)

Product benefits: • long lifetime • 80%-90% energy saving • dimmable with leading edge dimmers • good light distribution • no IR- and UV radiation, low heat radiation • high quality, robust housing • minimizes maintenance costs • short pay-back time

LED lamps

Voltage V

Power W

Beam of light

Fitting

Luminous intensity cd

Colour temp. (°K)

Code

MASTER LED SPOT LV Dimmerable

12V ac - dc 12V ac - dc 12V ac - dc 12V ac - dc 12V ac - dc 12V ac - dc 12V ac - dc 12V ac - dc 12V ac - dc 12V ac - dc 12V ac - dc 12V ac - dc 12V ac - dc 12V ac - dc

7 7 7 7 7 7 7 7 10 10 10 10 10 10

15° 24° 36° 60° 15° 24° 36° 60° 15° 24° 36° 15° 24° 36°

GU5.3 GU5.3 GU5.3 GU5.3 GU5.3 GU5.3 GU5.3 GU5.3 GU5.3 GU5.3 GU5.3 GU5.3 GU5.3 GU5.3

3210 1450 763 320 3300 1550 810 341 4000 1800 960 4200 1920 1010

2700 2700 2700 2700 3000 3000 3000 3000 2700 2700 2700 3000 3000 3000

96.15 96.24 96.36 96.60 97.15 97.24 97.36 97.60 98.15 98.24 98.36 99.15 99.24 99.36

Dimmerable

Features : • low energy consumption • suitable for replacement (retrofit) of low voltage halogen lamps with GU5.3 socket • available in beam angles of 36° • dimmable • available in 2700K, 3000K • very good color rendering • temperature range: -20° C to +45° C ambient temperature • ideal for accent lighting in hotels, hospitals, shops and museums (e.g. floors, elevators, displays) in open luminaires (with an open/free air gap of min. 10 mm) • bloadly compatible with existing electromagnetic & electronic halogen transformers • dimensions: 53.7 x 50 mm • weight 0.044 g

Product benefits: • long lifetime • 80% energy saving • no IR- and UV radiation; ideal to illuminate heat sensitive objects • minimizes maintenance costs • short pay-back time

655

LEGEND LAMP Discharge lamps

Voltage V

Power W 70 70 150 150 70 70 150 150 250 250 50 100 50 100 35 70 35 35 35 70 70 70 35 70 150 35 35 70 70 150 150 250 35 70 35 70 20 35 35 35 35 35 250 400 45 60 90 140 70

656

Beam of light

Fitting

Light intensity (Im)

Colour temp. (°K)

Length in hours

ILCOS code

Code

30° 30°

RX7s RX7s RX7s RX7s RX7s RX7s RX7s RX7s Fc2 Fc2 PG12-1 PG12-1 GX12-1 GX12-1 E27 E27

5000 5000 11000 11000 6300 6300 13500 13500 20000 20000 2300 4800 2400 4900 3400 6400

3000 4200 3000 4200 3000 4200 3000 4200 3000 4000 2500 2500 2550 2550 3000 3000

6000 6000 6000 6000 9000 9000 9000 9000 6000 6000 15000 15000 10000 10000 7500 11000

MD MD MD MD MD MD MD MD MD MD STH STH STH STH MR MR

232.30 232.42 234.30 234.42 252.30 252.42 254.30 254.42 236.30 236.42 344 346 345 347 264.30 266.30

GX8.5 GX8.5 GX8.5 GX8.5 GX8.5 GX8.5 G12 G12 G12 G12 G12 G12 G12 G12 G12 G12 G8.5 G8.5 G8.5 G8.5 PGJ5 PGJ5 GX10 GX10 GX10 GX10 E40 E40

35000 8500 4000 50000 15000 9000 3500 7300 13000 3300 3300 6600 6600 14000 12700 23000 3500 7300 3500 7300 1650 3000 4000 2000 4000 2000 19000 40000

3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 4200 3000 4200 3000 4200 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 5200 4000

9000 9000 9000 9000 9000 9000 12000 12000 12000 12000 12000 12000 12000 12000 12000 11000 12000 12000 12000 12000 12000 12000 6000 6000 6000 6000 18000 18000

MR MR MR MR MR MR MT MT MT MT MT MT MT MT MT MT MT MT MT MT MT MT MR MR MR MR ME ME

265.10 265.24 265.40 267.10 267.24 267.40 220.30 221.30 222.30 242.30 242.42 244.30 244.42 246.30 246.42 247.30 223.30 225.30 243.30 245.30 240.30 248.30 241.38 241.60 249.38 249.60 282 284

PGZ12 PGZ12 PGZ12 PGZ12 E27

4725 6800 10450 16500 6600

2720 2730 2880 2860 2000

16000 12000 12000 12000 28000

MT MT MT MT ST

274 270 276 272 327

10° 24° 40° 10° 24° 40°

38° 60° 38° 60°

Compact fluorescent lamps

Voltage V

230 230 230 230 230 230

Fluorescent linear tubes

Voltage V

Fitting

Light intensity (Im)

Colour temp. (째K)

Length in hours

ILCOS code

Code

13 13 18 18 26 26 13 13 18 18 26 26 18 18 26 26 18 18 26 26 42 42 6 6 6 1,5 1,5 1,5 60 60 85 85 120 120 18 18 24 24 36 36 55 55 80 80 18 18

G24d-1 G24d-1 G24d-2 G24d-2 G24d-3 G24d-3 G24q-1 G24q-1 G24q-2 G24q-2 G24q-3 G24q-3 GX24d-2 GX24d-2 GX24d-3 GX24d-3 GX24q-2 GX24q-2 GX24q-3 GX24q-3 GX24q-4 GX24q-4 GX53 GX53 GX53 GX53 GX53 GX53 2G8-1 2G8-1 2G8-1 2G8-1 2G8-1 2G8-1 2G11 2G11 2G11 2G11 2G11 2G11 2G11 2G11 2G11 2G11 2G10 2G10

900 900 1200 1200 1800 1800 900 900 1200 1200 1800 1800 1200 1200 1800 1800 1200 1200 1800 1800 3200 3200 235 235 235 20mcd 12mcd 3mcd 4000 4000 6000 6000 9000 9000 750 750 1200 1200 1900 1900 3000 3000 6000 6000 1100 1100

3000 4000 3000 4000 3000 4000 3000 4000 3000 4000 3000 4000 3000 4000 3000 4000 3000 4000 3000 4000 3000 4000 2700 3000 4000 BIANCO ROSSO BLU 3000 4000 3000 4000 3000 4000 3000 4000 3000 4000 3000 4000 3000 4000 3000 4000 3000 4000

8000 8000 8000 8000 8000 8000 10000 10000 10000 10000 10000 10000 8000 8000 8000 8000 10000 10000 10000 10000 10000 10000 10000 10000 10000 50000 50000 50000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000

FSQ FSQ FSQ FSQ FSQ FSQ FSQH FSQH FSQH FSQH FSQH FSQH FSM FSM FSM FSM FSMH FSMH FSMH FSMH FSMH FSMH FB FB FB

FSMH FSMH FSMH FSMH FSMH FSMH FSDH FSDH FSDH FSDH FSDH FSDH FSDH FSDH FSDH FSDH FSDH FSDH

134.30 134.40 136.30 136.40 138.30 138.40 135.30 135.40 137.30 137.40 139.30 139.40 146.30 146.40 148.30 148.40 147.30 147.40 149.30 149.40 153.30 153.40 191.27 191.30 191.40 192.BI 192.R 192.BL 155.30 155.40 157.30 157.40 159.30 159.40 182.30 182.40 183.30 183.40 184.30 184.40 186.30 186.40 188.30 188.40 164.30 164.40

22 22 40 40 55 55

2GX13 2GX13 2GX13 2GX13 2GX13 2GX13

1800 1800 3200 3200 4200 4200

3000 4000 3000 4000 3000 4000

10000 10000 10000 10000 10000 10000

FSCH FSCH FSCH FSCH FSCH FSCH

122.30 122.40 123.30 123.40 125.30 125.40

Fitting

Light intensity (Im)

Colour temp. (째K)

Length in hours

ILCOS code

Code

G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5

1200 1200 1750 1750 3100 3100 1900 1900 4450 4450 2600 2600 6150 6150 3300 3300 4300 4300 875 2650 4450

3000 4000 3000 4000 3000 4000 3000 4000 3000 4000 3000 4000 3000 4000 3000 4000 3000 4000 BLU ROSSA VERDE

18000 18000 18000 18000 18000 18000 18000 18000 18000 18000 18000 18000 18000 18000 18000 18000 18000 18000 18000 18000 18000

FDH FDH FDH FDH FDH FDH FDH FDH FDH FDH FDH FDH FDH FDH FDH FDH FDH FDH FDH FDH FDH

115.30 115.40 114.30 114.40 116.30 116.40 117.30 117.40 118.30 118.40 119.30 119.40 120.30 120.40 121.30 121.40 113.30 113.40 121.BL 121:R 121.VE

Power W

Power W 14 14 24 24 39 39 21 21 54 54 28 28 80 80 35 35 49 49 35 35 35

Beam of light

657

Mains voltage halogen lamps

Fitting

Light intensity (cd)

Colour temp. (°K)

Length in hours

ILCOS code

Code

100 150

R7s R7s

1650 2600

3000 3000

2000 2000

HDG HDG

41 43

230 230 230 230 230 230 230 230 230 230 230 230 230

150 200 300 25 40 60 75 25 40 60 75 50 75

R7s R7s R7s G9 G9 G9 G9 G9 G9 G9 G9 GU10 GU10

2200 3200 5000 260 490 820 1100 230 460 790 1050 950 1900

3000 3000 3000 2900 2900 2900 2900 2900 2900 2900 2900 2900 2900

2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000

HDG HDG HDG HS HS HS HS HS HS HS HS HMG HMG

42 44 46 30 32 34 36 31 33 35 37 72.25 74.25

230 230

150 230

E27 E27

2400 4210

1900 2900

2000 2000

HSGT HSGT

22 24

230 230

50 75

25° 25°

E27 E27

1000 5500

2900 2900

2500 3000

HMG HMG

32.25 34.25

230 230

75 100

30° 30°

E27 E27

2200 3500

2900 2900

3000 3000

HMG HMG

37.30 38.30

Voltage V

Power W

Beam of light

Fitting

Light intensity (cd)

Colour temp. (°K)

Length in hours

ILCOS code

Code

12 12

50 50

8° 24°

G53 G53

20000 3500

3000 3000

HMG HMG

84.08 84.24

12 12 12 12 12 12

75 75 75 100 100 100

8° 24° 45° 8° 24° 45°

G53 G53 G53 G53 G53 G53

30000 5300 2000 48000 8500 2800

3000 3000 3000 3000 3000 3000

HMG HMG HMG HMG HMG HMG

86.08 86.24 86.45 88.08 88.24 88.45

Voltage V

Power W

Beam of light

Fitting

Light intensity (cd)

Colour temp. (°K)

Length in hours

ILCOS code

Code

12 12

35 35

8° 24°

G53 G53

22500 4500

3000 3000

4000 4000

HMG HMG

82.08 82.24

12 12 12 12 12 12

50 50 50 65 65 65

8° 24° 45° 8° 24° 45°

G53 G53 G53 G53 G53 G53

33000 5800 2000 45000 8500 2800

3000 3000 3000 3000 3000 3000

4000 4000 4000 4000 4000 4000

HMG HMG HMG HMG HMG HMG

83.08 83.24 83.45 85.08 85.24 85.45

Voltage V

Power W

Beam of light

Fitting

Light intensity (cd)

Colour temp. (°K)

Length in hours

ILCOS code

Code

12 12 12 12 12 12

5 10 20 35 50 75

G4 G4 G4 GY6.35 GY6.35 GY6.35

60 130 320 600 930 1450

3000 3000 3000 3000 3000 3000

4000 4000 4000 4000 4000 4000

HSG HSG HSG HSG HSG HSG

50 51 52 54 56 58

Voltage V

Power W

Beam of light

Fitting

Light intensity (cd)

Colour temp. (°K)

Length in hours

ILCOS code

Code

12 12

20 35

38° 38°

GU4 GU4

550 900

3100 3100

2000 2000

HRGI HRGI

61.38 63.38

12 12 12 12 12 12

20 35 50 20 35 50

38° 38° 38° 38° 38° 38°

GU5.3 GU5.3 GU5.3 GU5.3 GU5.3 GU5.3

500 1100 1800 500 1100 1800

3100 3100 3100 3100 3100 3100

2000 2000 2000 2000 2000 2000

HRG HRG HRG HRGI HRGI HRGI

64.38 66.38 68.38 65.38 67.38 69.38

Voltage V

Power W

Beam of light

Fitting

Light intensity (cd)

Colour temp. (°K)

Length in hours

ILCOS code

Code

12 12 12 12 12 12 12 12 12 12 12 12

20 20 20 20 35 35 35 35 50 50 50 50

10° 24° 38° 60° 10° 24° 38° 60° 10° 24° 38° 60°

GU5.3 GU5.3 GU5.3 GU5.3 GU5.3 GU5.3 GU5.3 GU5.3 GU5.3 GU5.3 GU5.3 GU5.3

6000 2300 1000 450 12500 4400 2200 1100 15000 5700 2850 1430

3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000

5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000

HRGI HRGI HRGI HRGI HRGI HRGI HRGI HRGI HRGI HRGI HRGI HRGI

90.10 90.24 90.38 90.60 91.10 91.24 91.38 91.60 92.10 92.24 92.38 92.60

Voltage V

Power W

230 230

Beam of light

74,9 mm

114,2 mm

clair

opale

Very low voltage halogen lamps

Very low voltage halogen lamps IRC

Very low voltage halogen lamps

Very low voltage halogen lamps IRC

658

35° 30°

Code list 100 DIM 100 101 DIM 101 102 TR 102 104 105 107 TR 107 108 TR 108 109 TR 109 110 TR 130 TR 130 DIM 130 131 TR 132 TR 140 TR 150 TR 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 350 DIM 350 351 352 353 354 355 356 357 358 360 361 362 DMX 362 363 365 366 367 413 414 415 416 417 418 419 422 T 423 424 T 425 426 T 427 432 433 434 435 436 437 440 441

256 256 256 256 244 244 256 256 244 244 244 244 244 244 248 248 256 256 251 251 248 248 516 516 516 516 517 517 517 517 518 518 518 518 519 519 519 519 520 520 520 520 516 516 517 517 152 152 152 173 169 169 170 173 175 171 202 202 207 202 202 202 202 202 623 606 468 136 136 265 606 265 140 265 140 265 265 417 265 417 265 136 136 611 580

450 451 452 453 454 455 456 457 459 463 464 500 501 502 503 504 505 506 507 508 509 510 511 512 513 522 524 525 526 528 530 PC 530 532 534.BL 534.BI 534.AM 550 551 552 553 554 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 574 576 577 578 579 581 582 583 584 585 586 587 590 591 592 593 601 602 603 604 605 GI 605 BL 605 BI 611 612 613 614 615 GI 615 BL

579 579 579 207 623 579 579 579 580 632 634 618 618 618 618 619 619 619 619 620 620 622 622 622 622 98 100 100 98 100 100 100 86 87 87 87 382 382 382 378 374 378 374 383 383 383 378 374 398 398 398 374 378 398 398 398 378 383 378 374 374 484 484 484 484 78 114 29 402 402 402 402 388 388 388 388 388 388 388 388 388 388 388 388 388

615 BI 620 622 623 624 625 630 633 635 636 637 638 639 640 642 643 644 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 670 671 672 673 674 675 676 678 679 682 683 684 685 686 701 702 703 704 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 723 727 735 740 741 742 743 744 745 746 747 748 749 750 771

388 54 54 54 70 54 78 78 78 40 40 48 60 529 529 529 529 529 529 29 29 60 60 60 60 60 29 29 29 29 29 335 335 335 335 335 503 503 503 504 504 504 505 505 504 440 440 502 502 502 90 90 90 90 91 91 91 91 91 91 91 91 91 91 91 91 91 91 91 91 93 93 93 92 92 92 92 93 93 93 93 93 93 93 364

772 776 777 778 779 780 781 782 783 784 785 787 788 789 792 793 794 795 796 797 798 799 800 801 802 803 805 806 807 809 819 821 822 830 831 832 833 834 835 836 837 840 841 842 843 845 847 849 850 851 852 853 854 861 862 863 864 865 866 867 880 881 882 883 884 885 886 888 889 894 895 896 897 898 899 901 912 915 917 918 919 920 922 924 SA 924

364 365 365 365 365 365 365 365 365 365 365 140 365 365 136 136 136 350 365 368 365 140 616 616 614 615 615 614 614 614 614 605 606 123 123 123 123 123 123 123 123 486 486 486 492 492 493 493 339 339 339 339 343 463 463 463 463 626 463 627 542 542 542 542 542 542 542 507 521 507 507 507 507 507 507 66 108 98 98 98 294 100 100 99 98

926 SA 926 928 PC 928 930 930 931 934 936 939 940 941 942 943 944 945 946 947 949 953 954 955 956 957 958 976 977 980 981 982 983 984 985 986 987 988 990 991 992 993 994 995 996 997 1000 1001 1010 1011 1020 1030 1035 1050 1060 1070 1080 1090 RGB 45 1090 RGB 25 1090 RGB 10 1090 BIN 45 1090 BIN 30 1090 BIN 10 1090 BIC 45 1090 BIC 30 1090 BIC 10 1090 1120 1125 RGB 45 1125 RGB 25 1125 RGB 10 1125 BIN 45 1125 BIN 30 1125 BIN 10 1125 BIC 45 1125 BIC 30 1125 BIC 10 1125 1130 1135 1140 1150 1160 1180 1190 1220 1250 RGB 45

101 100 101 100 502 54 408 54 402 476 484 484 484 484 470 470 642 642 468 318 318 318 320 583 583 642 642 484 484 484 484 486 484 484 484 484 355 468 469 470 471 472 473 476 348 348 348 348 350 350 350 351 351 351 351 577 577 577 581 581 581 581 581 581 351 352 577 577 577 581 581 581 581 581 581 352 352 352 353 353 353 354 354 354 586

1250 RGB 25 1250 RGB 10 1250 BIN 45 1250 BIN 30 1250 BIN 10 1250 BIC 45 1250 BIC 30 1250 BIC 10 1250 1252 RGB 45 1252 RGB 25 1252 BIN 45 1252 BIN 30 1252 BIN 10 1252 BIC 45 1252 BIC 30 1252 BIC 10 1252 1254 RGB 45 1254 RGB 25 1254 RGB 10 1254 BIN 40 1254 BIN 30 1254 BIN 10 1254 BIC 40 1254 BIC 30 1254 BIC 10 1254 1300 1301 1302 1310 R 1310 1311 R 1311 1312 R 1312 1313 1314 1315 1330 1331 1332 1333 1334 1335 1350 1352 1354 1356 1360 BIN 30 1360 BIC 30 1361 BIN 30 1361 BIC 30 1380 BIN 30 1380 BIC 30 1381 BIN 30 1381 BIC 30 1400 1402 BIN 45 1402 BIN 25 1402 BIN 10 1402 BIC 45 1402 BIC 25 1402 BIC 10 1420 1422 BIN 45 1422 BIN 25 1422 BIN 10 1422 BIC 45 1422 BIC 25 1422 BIC 10 1440 1441 1442 1443 1444 RGB 1446 BIN 45 1446 BIN 25 1446 BIN 10 1446 BIC 45 1446 BIC 25 1446 BIC 10 1450 1451

586 586 584 584 584 584 584 584 329 586 586 584 584 584 584 584 584 329 586 586 586 584 584 584 584 584 584 328 343 343 343 340 338 340 338 340 338 338 338 339 334 334 334 334 334 335 368 369 368 369 610 610 610 610 610 610 610 610 468 634 634 634 634 634 634 469 635 635 635 635 635 635 470 470 470 470 632 634 634 634 634 634 634 476 476

1452 1455 1456 1457 1460 1461 1462 1463 1464 RGB 1466 BIN 45 1466 BIN 25 1466 BIN 10 1466 BIC 45 1466 BIC 25 1466 BIC 10 1480 1481 1482 1483 1490 1491 1492 1493 1500 BIN 1500 BIC 1501 BIN 1501 BIC 1502 BIN 1502 BIC 1503 BIN 1503 BIC 1504 BIN 1504 BIC 1505 BIN 1505 BIC 1506 BIN 1506 BIC 1510 BIN 1510 BIC 1511 BIN 1511 BIC 1512 BIN 30 1512 BIC 30 1513 BIN 30 1513 BIC 30 1520 BIN 1520 BIC 1521 BIN 1521 BIC 1522 BIN 1522 BIC 1524 BIN 1524 BIC 1526 BIN 1526 BIC 1530 BIN 1530 BIC 1600 RGB 33 1600 BIN 33 1600 BIC 33 1601 RGB 33 1601 BIN 33 1601 BIC 33 1602 RGB 33 1602 BIN 33 1602 BIC 33 1604 RGB 33 1604 BIN 33 1604 BIC 33 1605 RGB 33 1605 BIN 33 1605 BIC 33 1606 RGB 33 1606 BIN 33 1606 BIC 33 1607 RGB 33 1607 BIN 33 1607 BIC 33 1608 RGB 33 1608 BIN 33 1608 BIC 33 1609 RGB 33 1609 BIN 33 1609 BIC 33 1610 RGB 33 1610 BIN 33 1610 BIC 33 1611 RGB 33 1611 BIN 33 1611 BIC 33

477 637 637 637 471 471 471 471 633 635 635 635 635 635 635 472 472 472 472 473 473 473 473 614 614 614 614 614 614 614 614 614 614 614 614 614 614 615 615 615 615 615 615 615 615 617 617 617 617 616 616 616 616 626 626 627 627 618 618 618 618 618 618 618 618 618 619 619 619 619 619 619 619 619 619 619 619 619 620 620 620 620 620 620 622 622 622 622 622 622

1612 RGB 33 1612 BIN 33 1612 BIC 33 1613 RGB 33 1613 BIN 33 1613 BIC 33 2000 2001 2002 2003 2004 EL 2005 EL 2006 EM 2006 2007 EM 2007 2008 2009 2367 2400 EL 2402 2406 2408 2550 BIN 2550 BIC 2630 2631 2632 2633 2634 2635 2636 RGB DALI 2636 RGB 2636 2640 RGB LED 2640 BIN ET 2640 BIN 30 2640 BIN 20 2640 BIN 10 2640 BIC ET 2640 BIC 30 2640 BIC 20 2640 BIC 10 2641 RGB LED 2641 BIN ET 2641 BIN 30 2641 BIN 20 2641 BIN 10 2641 BIC ET 2641 BIC 30 2641 BIC 20 2641 BIC 10 2642 RGB LED 2642 BIN ET 2642 BIN 30 2642 BIN 20 2642 BIN 10 2642 BIC ET 2642 BIC 30 2642 BIC 20 2642 BIC 10 2700 2701 2702 2703 2704 2705 2706 2708 2710 2712 2714 2716 2718 2720 2722 2724 2726 2730 2731 2732 2733 2734 2735 2736 2737 2738 2739 BIF 2750 2751

622 622 622 622 622 622 234 234 234 234 234 234 235 235 235 235 234 234 484 548 548 548 548 630 630 484 484 484 484 484 484 485 485 484 644 642 642 642 642 642 642 642 642 644 642 642 642 642 642 642 642 642 644 642 642 642 642 642 642 642 642 542 543 542 543 542 543 542 542 542 543 543 543 543 538 538 539 539 512 512 512 512 512 512 512 512 512 648 513 513

2752 2753 2754 2755 2756 2757 2758 2759 2760 2761 2762 2763 2764 2765 2766 2767 2768 2769 2770 2771 2772 2800 RGB 2801 2803 2804 EL 2805 2806 2807 2809 2810 2812 2814 2816 2819F 2820F 2820 2822 2824 2850 2851 2852 2853 2854 2855 2860 2861 2862 3003 EL 3003 BIN 3003 BIC 3005 EL 3005 BIN 3005 BIC 3007 EL 3007 BIN 3007 BIC 3008 BIN 3008 BIC 3008 3009 BIN 3009 BIC 3009 3010 3011 BIN 3011 BIC 3011 3012 3030 EM 3030 EL 3031 EM 3031 EL 3032 3033 EL 3034 EM 3034 EL 3040 EL 3100 3103 3110 3120 3121 3130 3136 3137 70 3137 35 3138 3139 3140R BIN 40 3140R BIN 30 3140R BIN 10

513 513 513 513 513 513 513 513 513 513 513 513 513 513 513 513 513 513 513 513 513 653 526 526 528 527 528 527 526 528 528 526 526 432 440 502 502 502 460 460 461 461 461 461 462 462 462 318 582 582 318 582 582 318 582 582 583 583 320 583 583 321 321 583 583 321 321 312 312 314 314 312 313 313 313 312 270 272 270 276 277 282 299 299 299 299 298 569 569 569

3140R BIC 40 3140R BIC 30 3140R BIC 10 3140 R 3140 BIN 40 3140 BIN 30 3140 BIN 10 3140 BIC 40 3140 BIC 30 3140 BIC 10 3140 3141R BIN 40 3141R BIN 30 3141R BIN 10 3141R BIC 40 3141R BIC 30 3141R BIC 10 3141 R 3141 BIN 40 3141 BIN 30 3141 BIN 10 3141 BIC 40 3141 BIC 30 3141 BIC 10 3141 3144 3145 BIN 40 3145 BIN 30 3145 BIN 10 3145 BIC 40 3145 BIC 30 3145 BIC 10 3145 3146 3147 3148 3149 RGB 70 3149 RGB 3149 70 3149 3153 R 3153 3154 R 3154 3155 3156 3158 3160 3161 3170 3171 3172 3180 3181 3181 70 3182 3182 70 3190 3192 3200 3203 3204 3220 3221 3240R BIN 40 3240R BIN 30 3240R BIN 10 3240R BIC 40 3240R BIC 30 3240R BIC 10 3240 R 3240 BIN 40 3240 BIN 30 3240 BIN 10 3240 BIC 40 3240 BIC 30 3240 BIC 10 3240 3241R BIN 40 3241R BIN 30 3241R BIN 10 3241R BIC 40 3241R BIC 30 3241R BIC 10 3241 R 3241 BIN 40 3241 BIN 30 3241 BIN 10 3241 BIC 40 3241 BIC 30

569 569 569 287 568 568 568 568 568 568 286 571 571 571 571 571 571 289 570 570 570 570 570 570 288 295 572 572 572 572 572 572 294 294 295 298 298 298 298 298 287 286 289 288 296 296 296 280 281 304 304 304 305 305 305 305 305 306 306 270 272 272 276 277 569 569 569 569 569 569 287 568 568 568 568 568 568 286 571 571 571 571 571 571 289 570 570 570 570 570

3241 BIC 10 3241 3242 R 3242 3243 R 3243 3245 BIN 40 3245 BIN 30 3245 BIN 10 3245 BIC 40 3245 BIC 30 3245 BIC 10 3245 3246 3260 3261 3270 3271 3272 3280 3281 3281 70 3282 3282 70 3300 3303 3330 3331 3332 3340R BIN 40 3340R BIN 30 3340R BIN 10 3340R BIC 40 3340R BIC 30 3340R BIC 10 3340 R 3340 BIN 40 3340 BIN 30 3340 BIN 10 3340 BIC 40 3340 BIC 30 3340 BIC 10 3340 3341R BIN 40 3341R BIN 30 3341R BIN 10 3341R BIC 40 3341R BIC 30 3341R BIC 10 3341 R 3341 BIN 40 3341 BIN 30 3341 BIN 10 3341 BIC 40 3341 BIC 30 3341 BIC 10 3341 3342 R 3342 3343 R 3343 3345 BIN 40 3345 BIN 30 3345 BIN 10 3345 BIC 40 3345 BIC 30 3345 BIC 10 3345 3346 3360 3361 3370 3371 3372 3380 3381 3381 70 3382 3382 70 3400 3405 3406 3410 3442 R 3442 3443 R 3443 3444 3447 3448

570 288 287 286 289 288 572 572 572 572 572 572 294 294 280 281 304 304 304 305 305 305 305 305 270 273 276 277 276 569 569 569 569 569 569 287 568 568 568 568 568 568 286 571 571 571 571 571 571 289 570 570 570 570 570 570 288 287 286 289 288 572 572 572 572 572 572 294 294 280 281 304 304 304 305 305 305 305 305 271 270 273 2714 287 286 287 286 295 294 294

3460 3461 3500 3501 3502 3503 3504 70 3504 150 3504 3510 3511 3512 3513 3514 3516 3518 4000F 4000 EL 4000 4001 4002 4003 4005F 4020F 4020 EL 4020 4021 EM 4021 4022 4023 4024 4027 4028F 4100 BIN 45 4100 BIN 25 4100 BIN 10 4100 BIC 45 4100 BIC 25 4100 BIC 10 4101 BIN 45 4101 BIN 25 4101 BIN 10 4101 BIC 45 4101 BIC 25 4101 BIC 10 4102 BIN 45 4102 BIN 25 4102 BIN 10 4102 BIC 45 4102 BIC 25 4102 BIC 10 4103 BIN 45 4103 BIN 25 4103 BIN 10 4103 BIC 45 4103 BIC 25 4103 BIC 10 4104 BIN 45 4104 BIN 25 4104 BIN 10 4104 BIC 45 4104 BIC 25 4104 BIC 10 4105 BIN 45 4105 BIN 25 4105 BIN 10 4105 BIC 45 4105 BIC 25 4105 BIC 10 4106 BIN 45 4106 BIN 25 4106 BIN 10 4106 BIC 45 4106 BIC 25 4106 BIC 10 4107 BIN 45 4107 BIN 25 4107 BIN 10 4107 BIC 45 4107 BIC 25 4107 BIC 10 4108 BIN 45 4108 BIN 25 4108 BIN 10 4108 BIC 45 4108 BIC 25 4108 BIC 10 4120 4121 4122

280 280 185 185 185 185 185 185 185 185 184 184 184 184 184 184 436 98 98 98 98 98 436 436 100 100 100 100 100 100 100 100 436 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 601 601 601 601 601 601 601 601 601 601 601 601 601 601 601 601 601 601 603 603 603 603 603 603 603 603 603 603 603 603 603 603 603 603 603 603 192 192 192

4123 4130 4131 4132 4133 4134 4135 4136 4140 4141 4142 4143 4144 4145 4150 4151 4152 4202 4204 4205 4213 4214 4215 4216 4217 5000 5003 5004 5005 5007 5008 5020 5021 5022 5023 5024 5025 5030 5041 EL 5041 5042 5046 5047 5048 5049 70 5049 5050 5051 150 5051 5052 5053 70 5053 5101F 5101 EL 5101 5102 5103F 5103 150 5103 5105 70 5105 5106 5107 5108 5109 70 5109 5111 5112 5115 EL 5115 5116 5117 5118 5119 150 5119 5120 5121 5122 5123 5125 5128 70 5128 5129 5130 EL 5140 EL 5150 BIN 40 5150 BIN 30 5150 BIN 10 5150 BIC 40 5150 BIC 30

192 194 195 195 195 195 195 195 198 198 198 198 198 198 199 199 199 108 108 108 110 110 110 110 110 260 260 260 260 260 260 260 260 261 261 264 264 260 78 78 78 78 80 81 80 80 81 79 79 80 80 80 430 54 54 54 430 55 55 55 55 54 56 57 54 54 57 56 66 66 66 67 67 66 66 60 60 60 61 61 60 60 60 70 70 561 561 561 561 561

5150 BIC 10 5150 5151 5153 5154 5155 5156 5157 5158 5200 BIN 40 5200 BIN 30 5200 BIN 10 5200 BIC 40 5200 BIC 30 5200 BIC 10 5201 5202 5203 5204 5205 5206 5207 5300 5301 5302F 5302 5303 5304 5305 5306 5307 5311 BIN 40 5311 BIN 30 5311 BIN 10 5311 BIC 40 5311 BIC 30 5311 BIC 10 5400 5401 5402F 5402 5403 5404 5405 5406 5407 5411 BIN 40 5411 BIN 30 5411 BIN 10 5411 BIC 40 5411 BIC 30 5411 BIC 10 5500 BIN 40 5500 BIN 30 5500 BIN 10 5500 BIC 40 5500 BIC 30 5500 BIC 10 5500 5501 5502 5520 BIN 25 5520 BIN 14 5520 BIC 25 5520 BIC 14 5717 5718 5726 5727 5732 5733 5738 5739 5762 5763 5768 5769 5817 5818 5826 5827 5832 5833 5838 5839 5862 5863 5868 5869 6010

561 40 40 40 40 41 42 42 42 559 559 559 559 559 559 48 48 48 48 48 48 49 28 28 426 28 28 28 28 28 29 556 556 556 556 556 556 30 30 426 30 30 30 30 30 31 557 557 557 557 557 557 562 562 562 562 562 562 36 36 36 554 554 554 554 360 361 362 363 360 361 362 363 360 361 362 363 360 361 362 363 360 361 362 363 360 361 362 363 486

6011 6012 6013 6014 6015 6016 6017 6020 RGB LED 6020 BIN ET 6020 BIN 30 6020 BIN 20 6020 BIN 10 6020 BIC ET 6020 BIC 30 6020 BIC 20 6020 BIC 10 6021 BIN ET 6021 BIN 30 6021 BIN 20 6021 BIN 10 6021 BIC ET 6021 BIC 30 6021 BIC 20 6021 BIC 10 6022 RGB LED 6022 RGB LED 6022 BIN ET 6022 BIN 30 6022 BIN 20 6022 BIN 10 6022 BIC ET 6022 BIC 30 6022 BIC 20 6022 BIC 10 6700 EM 6700 ELD 6700 DALI 6700 6701 EM 6701 ELD 6701 DALI 6701 6702 EM 6702 ELD 6702 DALI 6702 6703 EM 6703 ELD 6703 DALI 6703 6704 EM 6704 ELD 6704 DALI 6704 6705 EM 6705 ELD 6705 DALI 6705 6706 EM 6706 ELD 6706 DALI 6706 6707 EM 6707 ELD 6707 DALI 6707 6708 EM 6708 ELD 6708 DALI 6708 6709 EM 6709 ELD 6709 DALI 6709 6710 EM 6710 ELD 6710 DALI 6710 6711 EM 6711 ELD 6711 DALI 6711 6718 6719 6720 EM 6720 ELD 6720 DALI 6720 6722 EM 6722 ELD

486 486 486 486 486 486 486 645 643 643 643 643 643 643 643 643 643 643 643 643 643 643 643 643 645 645 643 643 643 643 643 643 643 643 248 248 248 248 248 248 248 248 248 248 248 248 248 248 248 248 245 245 245 245 245 245 245 245 245 245 245 245 245 245 245 245 244 244 244 234 244 244 244 244 244 244 244 244 244 244 244 244 251 251 252 252 252 252 252 252

6722 DALI 6722 6724 EM 6724 ELD 6724 DALI 6724 6726 EM 6726 ELD 6726 DALI 6726 6728 6729 6730 6732 6740 6741 6742 6743 6744 6745 6750 6751 6752 6753 6760 6762 6800 ELD 6800 6801 ELD 6900 6901 6902 6903 6904 7001 ELD 7001 DALI 7001 7002 ELD 7002 DALI 7002 7003 ELD 7003 DALI 7003 7004 ELD 7004 DALI 7004 7005 ELD 7005 DALI 7005 7011 ELD 7011 ELD 7011 DALI 7011 DALI 7011 7011 7012 ELD 7012 ELD 7012 DALI 7012 DALI 7012 7012 7013 ELD 7013 ELD 7013 DALI 7013 DALI 7013 7013 7014 ELD 7014 ELD 7014 DALI 7014 DALI 7014 7014 7015 ELD 7015 ELD 7015 DALI 7015 DALI 7015 7015 7020 EL 7021 EL 7022 EM 7022 EL 7031 ELD 7031 DALI 7031 7032 DALI 7032 ELD 7032 7033 ELD

252 252 252 252 252 252 252 252 252 252 250 250 253 253 122 122 122 122 122 122 256 256 254 254 254 254 255 255 255 202 202 202 202 207 174 174 174 174 174 174 174 174 174 174 174 174 174 174 174 174 170 174 170 174 170 174 170 174 170 174 170 174 170 174 170 174 170 174 170 174 170 174 170 174 170 174 170 174 170 391 391 391 391 170 170 170 170 170 170 170

7033 DALI 7033 7034 ELD 7034 DALI 7034 7035 ELD 7035 DALI 7035 7036D ELD 7036D DALI 7036D 7036 ELD 7036 DALI 7036 DALI 7036 7037D ELD 7037D DALI 7037D 7037 ELD 7037 DALI 7037 7038D ELD 7038D DALI 7038D 7038 ELD 7038 DALI 7038 7039D ELD 7039D DALI 7039D 7039 ELD 7039 DALI 7039 7040D ELD 7040D DALI 7040D 7040 ELD 7040 DALI 7040 7041 ELD 7041 DALI 7041 7042 ELD 7042 DALI 7042 7042 7043 ELD 7043 DALI 7044 ELD 7044 DALI 7044 7045 ELD 7045 DALI 7045 7046D ELD 7046D DALI 7046D 7046 ELD 7046 DALI 7046 7047D ELD 7047D DALI 7047D 7047 ELD 7047 DALI 7047 7048D ELD 7048D DALI 7048D 7048 ELD 7048 DALI 7048 7049D ELD 7049D DALI 7049D 7049 ELD 7049 DALI 7049 7050D ELD 7050D DALI 7050D 7050 ELD 7050 DALI 7050 7051 ELD 7051 ELD 7051 DALI 7051 DALI 7051 7051

170 170 170 170 170 170 170 170 161 161 161 160 170 160 160 161 161 161 160 160 160 161 161 161 160 160 160 161 161 161 160 160 160 161 161 161 160 160 160 176 176 176 176 176 176 176 176 176 176 176 176 176 176 176 163 163 163 162 162 162 163 163 163 162 162 162 163 163 163 162 162 162 163 163 163 162 162 162 163 163 163 162 162 162 176 172 176 172 176 172

7052 ELD 7052 ELD 7052 DALI 7052 DALI 7052 7052 7053 ELD 7053 ELD 7053 DALI 7053 DALI 7053 7053 7054 ELD 7054 ELD 7054 DALI 7054 DALI 7054 7054 7055 ELD 7055 ELD 7055 DALI 7055 DALI 7055 7055 7056D ELD 7056D DALI 7056D 7056 ELD 7056 DALI 7056 7057D ELD 7057D DALI 7057D 7057 ELD 7057 DALI 7057 7058D ELD 7058D DALI 7058D 7058 ELD 7058 DALI 7058 7059D ELD 7059D DALI 7059D 7059 ELD 7059 DALI 7059 7060D ELD 7060D DALI 7060D 7060 ELD 7060 DALI 7060 7061 ELD 7061 DALI 7061 7062 ELD 7062 DALI 7062 7063 ELD 7063 DALI 7063 7064 ELD 7064 DALI 7064 7065 ELD 7065 DALI 7065 7071 ELD 7071 DALI 7071 7072 ELD 7072 DALI 7072 7073 ELD 7073 DALI 7073 7074 ELD 7074 DALI 7074 7075 ELD 7075 DALI 7075 7076D ELD 7076D DALI 7076D 7076 ELD 7076 DALI 7076

176 172 176 172 176 172 176 172 176 172 176 172 176 172 176 172 176 172 176 172 176 172 176 172 155 155 155 154 154 154 155 155 155 154 154 154 155 155 155 154 154 154 155 155 155 154 154 154 155 155 155 154 154 154 172 172 172 172 172 172 172 172 172 172 172 172 172 172 172 168 168 168 168 168 168 168 168 168 168 168 168 168 168 168 159 159 159 158 158 158

7077D ELD 7077D DALI 7077D 7077 ELD 7077 DALI 7077 7078D ELD 7078D DALI 7078D 7078 ELD 7078 DALI 7078 7079D ELD 7079D DALI 7079D 7079 ELD 7079 DALI 7079 7080D ELD 7080D DALI 7080D 7080 ELD 7080 DALI 7080 7081 ELD 7081 DALI 7081 7082 ELD 7082 DALI 7082 7083 ELD 7083 DALI 7083 7084 ELD 7084 DALI 7084 7085 ELD 7085 DALI 7085 7086D ELD 7086D DALI 7086D 7086 ELD 7086 DALI 7086 7087D ELD 7087D DALI 7087D 7087 ELD 7087 DALI 7087 7088D ELD 7088D DALI 7088D 7088 ELD 7088 DALI 7088 7089D ELD 7089D DALI 7089D 7089 ELD 7089 DALI 7089 7090D ELD 7090D DALI 7090D

159 159 159 158 158 158 159 159 159 158 158 158 159 159 159 158 158 158 159 159 159 158 158 158 168 168 168 168 168 168 168 168 168 168 168 168 168 168 168 153 153 153 152 152 152 153 153 153 152 152 152 153 153 153 152 152 152 153 153 153 152 152 152 153 153 153

7090 ELD 7090 DALI 7090 7091 ELD 7091 DALI 7091 7092 ELD 7092 DALI 7092 7093 ELD 7093 DALI 7093 7094 ELD 7094 DALI 7094 7095 ELD 7095 DALI 7095 7096 ELD 7096 DALI 7096 7120 EL 7121 EM 7121 ELD 7121 EL 7122 EM 7122 ELD 7122 EL 7200 EL 7201 EM 7201 ELD 7201 EL 7202 EM 7202 ELD 7202 EL 7220 EL 7221 EM 7221 ELD 7221 EL 7222 EM 7222 ELD 7222 EL 7223 EM 7223 ELD 7223 EL 7230 7231 7232 7241 7242 7400 EL 7401 EL 7402 EM 7402 EL 7420 EL 7421 EM 7421 EL 7422 EM 7422 EL 7430 EL 7431 EM 7431 EL 7432 EM 7432 EL 7442 EM 7442 EL

152 152 152 178 178 178 178 178 178 178 178 178 178 178 178 178 178 178 178 178 178 389 389 389 389 389 389 389 398 398 398 398 398 398 398 388 388 388 388 388 388 388 390 390 390 392 392 392 392 392 382 382 382 382 383 383 383 383 383 378 378 378 378 378 374 374

7444 EM 7444 EL 8000 8002 8004 8006 8040 8041 8050 8051 8055 8056 8060 8061 8065 8066 8200 8230 8232 8234 8640 8641 8643 8644 8645 8648 EL 9011 9012 9015 9016 9021 9030 9031 9035F 9035 RGB 45 9035 RGB 25 9035 BIN 40 9035 BIN 30 9035 BIN 10 9035 BIC 40 9035 BIC 30 9035 BIC 10 9035 9036 9037 9100F 9100 9102 9104 9105 9106 9108 9120 9130 9150 9151 EL 9151 924.18 9250 9251 926.18 9300 9301 9500 9502 9510

374 374 492 492 492 492 492 492 606 606 606 606 607 607 607 607 120 120 120 120 86 86 87 87 87 86 413 413 416 416 416 402 402 448 576 576 580 580 580 580 580 580 408 408 408 444 412 412 412 413 412 412 419 419 114 114 114 99 114 114 101 272 272 226 226 226

9512 9520 EM 9520 ELD 9520 DALI 9520 9522 EM 9522 ELD 9522 DALI 9522 9530 EM 9530 ELD 9530 DALI 9530 9540 EM 9540 ELD 9540 DALI 9540 9550 9551 9552 9553 9554 EM 9554 ELD 9554 DALI 9554 9555 EM 9555 ELD 9555 DALI 9555 9560 EM 9560 ELD 9560 DALI 9560 9561 EM 9561 ELD 9561 DALI 9561 9580 9581 9582 9583 9584 EM 9584 ELD 9584 DALI 9584 9585 EM 9585 ELD 9585 DALI 9585 9590 EM 9590 ELD 9590 DALI 9590 9591 EM 9591 ELD 9591 DALI 9591 9600 9601 9610 9611 9620 EM 9620 ELD 9620 DALI 9620 9622 EM

226 226 226 226 226 226 226 226 226 228 228 228 228 228 228 228 228 210 210 210 210 210 210 210 210 210 210 210 210 212 212 212 212 212 212 212 212 216 216 216 216 216 216 216 216 216 216 216 216 217 217 217 217 217 217 217 217 228 228 228 228 228 228 228 228 228

9622 ELD 9622 DALI 9622 9630 EM 9630 ELD 9630 DALI 9630 9640 EM 9640 ELD 9640 DALI 9640 9650 9651 9652 9653 9654 EM 9654 ELD 9654 DALI 9654 9655 EM 9655 ELD 9655 DALI 9655 9660 EM 9660 ELD 9660 DALI 9660 9661 EM 9661 ELD 9661 DALI 9661 9680 9681 9682 9683 9684 EM 9684 ELD 9684 DALI 9684 9685 EM 9685 ELD 9685 DALI 9685 9690 EM 9690 ELD 9690 DALI 9690 9691 EM 9691 ELD 9691 DALI 9691 9700 EM 9700 ELD 9700 DALI 9700 9701 EM 9701 ELD 9701 DALI 9701 9702 EM 9702 ELD 9702 DALI 9702 9703 EM 9703 ELD 9703 DALI

228 228 228 229 229 229 229 229 229 229 229 212 212 212 212 212 212 212 212 212 212 212 212 213 213 213 213 213 213 213 213 218 218 218 218 218 218 218 218 218 218 218 218 219 219 219 219 219 219 219 219 128 128 128 128 128 128 128 128 128 128 128 128 128 128 128

9703 9750 9751 9752 9770 RGB 9770 9771 RGB 9771 9775 RGB 9775 9776 RGB 9776 9780 RGB 10 9780 RGB 45 9780 RGB 25 9780 BIN 45 9780 BIN 25 9780 BIN 10 9780 BIC 45 9780 BIC 25 9780 BIC 10 9780 9781 RGB 10 9781 RGB 45 9781 RGB 25 9781 BIN 45 9781 BIN 25 9781 BIN 10 9781 BIC 45 9781 BIC 25 9781 BIC 10 9781 9785 RGB 10 9785 RGB 45 9785 RGB 25 9785 BIN 45 9785 BIN 25 9785 BIN 10 9785 BIC 45 9785 BIC 25 9785 BIC 10 9785 9790 RGB 10 9790 RGB 45 9790 RGB 25 9790 BIN 40 9790 BIN 30 9790 BIN 10 9790 BIC 40 9790 BIC 30 9790 BIC 10 9790 9795 RGB 10 9795 RGB 45 9795 RGB 25 9795 BIN 40 9795 BIN 30 9795 BIN 10 9795 BIC 40 9795 BIC 30 9795 BIC 10 9795

128 132 132 132 596 144 596 144 596 144 596 144 592 592 592 590 590 590 590 590 590 136 592 592 592 590 590 590 590 590 590 138 594 594 594 591 591 591 591 591 591 137 592 592 592 590 590 590 590 590 590 140 594 594 594 591 591 591 591 591 591 141

Creation Realisation Photographs Photolitograph Print

Winning Associati - Bernareggio, Milan Winning Associati - Bernareggio, Milan Studio Fotografico Giudicianni e Biffi - Mezzago, Milan Massimiliano Biffi - Colnago, Milan Winning Associati - Bernareggio, Milan A. G. Bellavite - Missaglia, Lecco

A.G.BELLAVITE srl, Missaglia (Lc)

Printed in accordance with the GreenPrinting速 philosophy, aimed at protecting the environment by using materials (such as plates, paper, inks and packaging) with low environmental impact, as well as by using renewable energy sources and natural gas vehicles.

ZeroEmissionProduct速. A.G. Bellavite reduced its greenhouse gas emissions, both direct and indirect, for the manufacturing of its products to zero.

The 2011 Quattrobi general catalogue may not be reproduced either in whole or in part. Descriptions, images, sizes and all technical information contained in this document are indicative and are not binding for the Company. As Quattrobi implements a research and development system for continuous improvement of its products, the Company may change the existing sizes, executions and technical characteristics at any time without notice. For more information contact the Quattrobi Technhical Department. All rights reserved.