Issuu on Google+

GUÍA DE INSTALACIÓN INSTALATION GUIDE

Decomuro Line

Wall Paneling

Elegance , Comfort , Save and Do it yourself Tool List the area where you are 1 1 Identify going to install the sheet.

Power Drill with a 1/4 or 9/64 (Bit , drill).

r e t h e a r e a 1 P r e 1pdeasurface of dust or any 212 1 1 Clean other material, for an easyer

Measuring the wall first

i

n

s

t

a

l

a

t

i

o

n

.

the sheet on the wall. 3 11 Present 1 can mark the levels with a you

pencil in the sheet /and wall as well

Screws of 8 X 1 ½ inches

Rawl Plugs 1/4

Screw Driver ( cross )

41

Tape Measure

Drill the corners of the sheet previusly marked with the 9/64 (drill)

sheet in the wall just 1 Present 1the 512 to make sure is leveled. and star 1 1 drilling the holes in the wall using 1/4 drill

the rawl plugs, put the 6 11 Using 1 screws on , install it. and it´s ready.

Hacksaw Barniz Base Poliuretano

Varnish polyurethane base HENK

EL

Henkel Glue ÓN

Silicón

SILIC

Suggestions: If you are going to install it in exteriors , apply one hand of varnish ( polyurethane Base ) once a year To minimize the unions between sheets or holes. you can apply henkel glue and after it dryes, you can paint the area. If the product it´s installed in drywall, you must use rawl plugs for drywall for better results When you done with the installation, you can apply silicon around the perimeter. could be black or with , to seal any gap For a professional finish: you can use tile past, wait for it to dry and its ready. For more information about our products visit www.elcesar.com.mx, or give us a call at: 01 800 DECORA (01 800 833 26 72)

PRODUCT 100% SELF EXTINGUISH


GUIA DE INSTALACION DE PANEL O FACHALETA