.
weber col fast
Fast-setting high performance tile adhesive with Low Dust Technology
PRODUCT BENEFITS • Fast-setting • Low Dust technology • 2 components: Powder + Resin • Extra white
SUBSTRATE PREPARATION Substrate must be sound and free from dust, grease, oil, cement laitance or any other foreign materials. Over difficult substrates such as gypsum, wood, etc..., prime substrate with weber.col prime.
CLEANING OF TOOLS Clean the tools with water after use. Cured materials can only be removed mechanically.
PRECAUTIONS Apply weber.col fast on the substrate by areas which can be tiled within a maximum of 10 minutes from application at 26°C. After that time, an outer skin may form thus preventing the tile from adhering properly to weber.col fast. Adjustments to the tiles should only be made during weber.col fast’s open time. It is recommended to leave a minimum width of 2 mm around the tiles. Grouting the tile joints should only be done 3 to 8 hours (depending on site conditions) after tiling, using weber.joint perfect or weber.joint.
INSTRUCTIONS FOR USE
Pour the powder (PART B) in the liquid (PART A) progressively while stirring the liquid. Do not mix with water! An electric mixer with low rotation speed (<300rpm) should be used. Mix until a uniform lump-free paste is obtained.
Using a notched trowel apply weber.col fast evenly on the substrate to have a uniform thickness.
Apply the tiles on the substrate and press them firmly, while making sure that the paste does not slip from the tile sides. weber.col fast can also be applied on the back of tiles to ensure full adhesion on the entire surface.
Tile Adhesives
Available only in Lebanon, Syria, Jordan
59