Carrofix Grey/White
Carrofix PY
READY TO USE PASTY TILE ADHESIVE
Apply the tiles and press them strongly on the substrate in order to spread the product uniformly on the wall.
PRODUCT case exceptional performance is required, each bag of 25 kg Carrofix should be mixed with 1 liter Admix 225 MB (styrene butadiene latex bonding agent)+ 4 liters clean water. For 20 Kg bag Carrofix, use 1 liter Admix 225 MB+ 3 liters of clean water.
is non-flammable.
DISCLAIMER
While the company guarantees its products against defective materials, the use and application of these products are made without guarantee since the conditions of their application are beyond its control. It is recommended to verify with the company that the product is suitable for the intended use, and that this Data Sheet version is the latest one. The company may modify it without prior notice. Technical characteristics are listed for guidance only. For more information, please contact the company’s office in your location.
CLEANING
Clean the tools with water after use. Cured materials can only be removed mechanically.
PRECAUTIONS
Apply Carrofix on the substrate by areas of around 1m² each, which can be tiled within a maximum of 15 minutes from mixing time at 20°C. After that time, an outer skin may form thus preventing the tile from adhering properly to Carrofix. Adjustments to the tiles should only be made during its open time. It is recommended to leave a minimum width of 2 mm around the tiles (or as designed). Grouting the tile joints should only be done at least 24 hours after tiling, using Carrojoint.
NOTE
The information included on this Technical Data Sheet is the sole property of SODAMCO Holding. The unauthorized disclosure, use, dissemination or copying (either whole or partial) of this data sheet or any information it contains, is prohibited and subject to legal pursuit. Edition: 08/11-A
PACKAGING Carrofix is packed in 25 kg bags.
Carrofix PY is a pasty tile adhesive for interior purpose suitable for a wide range of tiles. It is a ready to use product based only on resins, fillers and plasticizers. Carrofix PY sets by evaporation.
Carrofix PY will set and seal by evaporation.Joints can be filled with the Carrojoint grout, 24 hours after the sealing of the tiles.
SCOPE OF USE Carrofix PY is designed for internal use only.
CONSUMPTION 3 to 5 kg/m².
ADMISSIBLE TILES • Ceramic tiles • Earthenware tiles • Sandstone tiles • Molten glass • Backed clay
PACKAGING Carrofix PY is supplied in 20 kg pails
STORAGE 1 year, stored in a fresh and dry area in unopened original packaging.
ADMISSIBLE SUBSTRATES • Concrete • Cementitious plasters • Gypsum plasters • Gypsum boards and all kind of gypsum partitions • Wooden substrates
SAFETY PRECAUTIONS Avoid prolonged contact with skin. Wear protective gear for hands & eyes. Splashes on the skin should be washed away by cleaning thoroughly with soap and water. In case of contact with eyes, wash thoroughly with clean water and seek medical attention. If swallowed, do not induce vomiting and seek medical attention. The product is non-flammable.
CHARACTERISTICS
STORAGE Carrofix can be stored for 6 months in dry conditions, away from extreme temperatures and protected against wind.
SAFETY PRECAUTIONS The product contains cement powders which, when mixed with water, release alkalis that could be harmful to the skin. It is preferable that the application be done in a ventilated area, and to wear protective gear for hands, eyes and respiratory system and to avoid breathing of the dust. Splashes on the skin should be washed away by cleaning thoroughly with soap and water. In case of contact with eyes, wash thoroughly with clean water and seek medical attention. If swallowed, do not induce vomiting and seek medical attention. The product
Appearance
Creamy sandy paste
Density pH Dry Extract Viscosity
1.68 7 79.5% 3000 Poise (brookfield module D5 trs/min.)
DISCLAIMER While the company guarantees its products against defective materials, the use and application of these products are made without guarantee since the conditions of their application are beyond its control. It is recommended to verify with the company that the product is suitable for the intended use, and that this Data Sheet version is the latest one. The company may modify it without prior notice. Technical characteristics are listed for guidance only. For more information, please contact the company’s office in your location.
INSTRUCTIONS FOR USE SURFACE PREPARATION The surface must be leveled and regular. The substrate must be clean, sound, free from all dust, greasy matters, and must be dry. Do not wet the wall nor the tiles. PRODUCT APPLICATION The product is ready to use. Apply Carrofix PY uniformly on the support and use the notched spatula to give the required thickness
284
NOTE The information included on this Technical Data Sheet is the sole property of SODAMCO Holding. The unauthorized
285