Tools and accessories
Tools
Description
Serrated straight edge TK24
Section scraping edge TK25
A new development in straight edges, this tool levels newly applied render as above while the serrated edge removes air pockets from monocouche renders and easily identifies hollows and low spots without bringing undue amounts of cement rich laitance to the surface. Sizes approx. 1200 x 115 mm -1800 x 115 mm. Use of the I- section scraping edge improves the flatness of scraped renders. It is a great advantage when incorporating Ashlar features in monocouche render as Ashlar features can highlight any deviation in the wall along their line. Used to scrape the surface over an extended length, it ensures increased accuracy in flatness along the line of the Ashlar cuts. Size approx. 1200 x 75 mm. Available in two widths this basic Ashlar plough produces square section Ashlar features, maximum recommended depth 5 mm, when run along the top of a straight rule placed along a previously described chalk line.
ashlar cutter TK11 (10mm) TK20 (20mm)
Replacement or alternative blades are available in the following profiles. Chamfered - 25 mm, 90째 V - 25 mm, 120째 V - 40 mm, blank - 40 mm.
blades for ashlar tool
Tools
ashlar tool TAT
A more complex tool, the ashlar tool can be fitted with a variety of profiles and can be adjusted to cut features at a regular depth from the face of a box section straight rule placed along a previously described chalk line. Recommended depth of cut 2-10 mm. Chamfered 40 mm blade included as standard.
125