3. You may put a few bolts into the front bulkhead to temporarily hold it in place. 4. Place the winch side plates provided with your bumper and winch tray into the sides of the installed winch tray.
4A
3
4B
5. Using the hardware provided with your bumper, bolt the winch side plates from the inside of the winch tray, through the frame. 6. If you wish to install fog lights into your new bumper, you may do so now.
6A
6B
7. Slide the bumper over the front bulkheads on the frame; you should not have to force it. 8. Using the provided hardware, bolt the included tow points through the front of the bumper, winch tray and frame. 9. Tighten all eight bolts on the front of the bumper. 10. Install the two bolts into the top of the bumper and thread them through the frame of the Jeep. 11. If you wish to install a winch, you may do so now. Winch Fairleads are available at www.genright.com Enjoy your new GenRight bumper!
136
5
6C 7
6D