General Information To reset the hour display, ensure that the hour display is still flashing and the word Hour is visible. Press the SCROLL button to change the setting. Each individual button press will change the setting by one digit. If the button is held, the display will continuously scroll through in single digit increments. When the correct hour display is shown, press the SET button. The minutes display will begin to flash and the word Min is visible in the display screen. The minutes display is adjusted in the same way as for the hours. Once both hours and minutes are correctly set, press the SET button to confirm and t-SEt will be visible in the display screen. Press the SCROLL button until the display shows REtURn and press the SELECT button, the odometer in the trip 1 menu will be visible in the display screen.
3
2
Auto – Self-canceling Turn signals – Ind This Triumph model has a self-canceling turn signal function that can be disabled or enabled. To disable or enable the self-canceling function; with the motorcycle stationary and in neutral, press and release the SET button on the left hand switch housing until SEtUP is visible in the display screen. Press and release the SCROLL button until Ind is visible in the display screen. Press and release the SET button and Auto or MAnUAL will flash on and off. Press and release the SCROLL button to select Auto or MAnUAL then press the SET button. • Auto – The self-canceling function is on (see page 62). • MAnUAL – The self-canceling function is off. The turn signals must be manually cancelled (see page 62).
1
4 1. 2. 3. 4.
Clock display Hours read-out Minutes read-out Display screen (Hour selected for adjustment)
1 1. Auto selected To exit the Auto – Self-canceling Turn Signals menu, press and release the
43