Led usa street & city lighting by Dorican Trade

RWL3525

LED ROADWAY LIGHTING

EFFICIENT

HIGH TECH

DURABLE

RWL 3525 Series

LED Roadway Lighting

Product Information The RWL3525-35watt is a low profile, technologically advanced, next generation of LED street light. Its compact design incorporates the industryâ&#x20AC;&#x2122;s highest power density and efficacy and is available in numerous choices of optics for a wide range of light distribution patterns. The RWL3525-35watt is constructed from high grade aluminum alloys and has an IP68 (waterproof) and petrochemical industry rating. Its Patented thermal management system ensures long LED life with extended lumen maintenance and virtually zero fixture maintenance. Without any secondary optics the RWL3525-35watt provides ultra-bright industry leading high efficacy light output, resulting in cost effective solutions with a short ROI period. It is designed to withstand harsh outdoor weather conditions with an unprecedented 7-Year limited warranty on the LED light engine. US PATENT #7,676,915 B2 / # 8,272,765 other US and international patents pending.

RoHS compliant

IP68

www.lightemittingdesigns.com e-mail: info@lightemittingdesigns.com

L.E.D. is a trademark of Light Emitting Design, Inc. ÂŠ 2014 Light Emitting Design, Inc.

RWL 3525 Series

LED Roadway Lighting

IP68 Rated Waterproof Fixture

Patented MCPCB Technology Enables Low LED Junction Temperatures for Maintenance Free Long Life

Surge & Lightning Protection Up to 10kV / 10kA

Proprietary Optical System Enabling Maximum Fixture Efficacy

Patented Air-Flow Convection ® Enables Maintenance Free Long Life

Advantages of RWL3525

Application

• Energy Efficient / High lumen output

• Type II Wide Street Lighting • Type VI Rectangular Wide • Parking Lots • Perimeter Lighting • Parks and Walkway Lighting

• Wide Angle Lighting enabling longer pole spacing • Dark Sky Compliant / Full Cut-Off Optics • Technologically Advanced, low profile all-purpose LED street light • Ultra bright industry leading High Efficacy (lm/W) luminaire • Proprietary Reflector Controlled Optics enabling glare-free uniform lighting for all working environments. Eliminating the need for costly and fragile plastic lenses • Cost effective solution with a Short ROI Period • Patented Advanced Integrated Thermal Technology enables low LED junction temperatures (Tj) for maintenance free long life • First true industrial grade luminaire that is IP68 (waterproof) and Petro-Chemical Industry rated with an exceptional 7-Year Limited Warranty • Surge and Lightning Protection of up to 10kV / 10kA

RoHS compliant

IP68

www.lightemittingdesigns.com e-mail: info@lightemittingdesigns.com

RWL 3525 Series

LED Roadway Lighting Features • • • •

El ec t r o n i c s

RWL 3525 Light Module is designed to last 70,000 hours with a m inimum of 70% Lumen Maintenance High lumen output & high efficacy Available in warm (3000K), neutral (4000K) and cool (5500K) white Indoor / outdoor IP68 (Waterproof)

• •

Ho u s i n g

•

Patented Advanced Integrated Thermal Technology enables low LED junction temperatures (Tj) for maintenance free long life

•

P owder coated with industrial grade Du r a-Gu ar d double layer epoxy for year round indoor/outdoor applications with industry leading 10 years protection on weather and corrosion

•

Patented MCPCB Technology enables ultra low LED junction temperatures for maintenance free long life Integrated high efficiency LED driver and power supply Smart circuitry with surge and transient voltage protection Powered by industry leading high brightness LED chip

Op t i c s •

Fu l l C u t -Off proprietary reflector and optical system providing powerful glare free uniform lighting

External Dimensions Ø65mm 2-1/2"

170mm 6-3/4"

350mm 13-3/4"

250mm 9-7/8"

Packaging Information

RoHS compliant

Case Quantity

Dimensions (LxWxH)

Weight

43 x 33 x 24.5 cm 16⅞ x 13 x 9⅝ in

5.7 kg 12.5 Ibs

IP68

www.lightemittingdesigns.com e-mail: info@lightemittingdesigns.com

RWL 3525 Series

LED Roadway Lighting Optic Options

02 - Type II Roadway Lighting / asymmetric for street and pedestrian walkway applications M - Medium

S5 - Type V Rectangular / Symmetric for street, parking and flood application M - Medium

RoHS compliant

IP68

www.lightemittingdesigns.com e-mail: info@lightemittingdesigns.com

L.E.D. is a trademark of Light Emitting Design, Inc. ÂŠ 2014 Light Emitting Design, Inc.

RWL 3525 Series

LED Roadway Lighting Ordering Information XXX

RWL3525 Series

Wattage

Voltage

035 = 35Watt 055 = 55Watt 075 = 75Watt

UV = 90-277VAC HV = 305-528VAC

Optics 02 = TypeⅡ S5 = TypeⅤ Rectangular

Pitch

CCT

Driver

S = Short M = Medium L = Long

30 = 3000K 40 = 4000K 55 = 5500K

ND = Non-Dimmable NS = Non-Dimmable + Sensor DM = Dimmable DS = Dimmable + Sensor

NOTE: Outdoor application and corrosive environment please request glass lens. Gray is the standard exterior color. Other colors are available on request.

Example Part Number

Part Description

RWL3525-035UV-S5M-55NS

LED Roadway Light / 35 Watt / 90-277VAC / Type V Rectangular / Medium Pitch / 5500K Cool White / Non-Dimmable with Motion Sensor

Comparison Chart Type of Light Fixture

RWL3525

Metal Halide (150W)

High Pressure Sodium (150W)

Total System Wattage

35W

175W

Average Lamp Life

75,000

10,000

Maintenance Savings

$35,000

Annual Energy Savings

$10,015

Annual Kwh Savings

71,344kWh

Carbon footprint Savings / Year

36,485kg

Return of Investment

1.96 years 23.54 months

* All figures are typical and based on calculations provided by the United States Environmental Protection Agency NOTE: All Values Have ±5% Tolerance

RoHS compliant

IP68

www.lightemittingdesigns.com e-mail: info@lightemittingdesigns.com

RWL 3525 Series

LED Roadway Lighting - 35Watt Specification System Watts *

35 Watt

Lumens (Total) **

4,200 Lumens

Efficacy (Neutral / Cool) ***

120 Lumens / W

LED Model

Luxeon M

Number of LEDs & Driving Current

6@500mA

CRI

TJ - Junction Temp (Ta @ 25°C)

54°C

Operational Temp / Storage Temp.

- 40 ~ + 50°C / - 40 ~ + 80°C

Certifications

IP68

(pending)

RoHS

* Total watts consumed by luminaire including LED driver @ Ta: 25°C ** Lumens delivered @ Ta: 25°C, including optical loss *** Luminaire efficacy @ Ta: 25°C, including LED driver inefficiency & optical loss NOTE: All Values Have ±5% Tolerance

Illumination Levels - Type II / Medium 41Lux / 3.5fc 56Lux / 5.5fc 72Lux / 7fc 108Lux / 10.5fc

8m / 26ft

7m / 23ft

6m / 20ft

5m / 16.5ft

4.3m / 14ft

6.0m / 19.5ft

7.7m / 25.3ft

9.3m / 30.5ft

11m / 36ft

148Lux / 13.5fc 4m / 13ft

15.5m / 51ft 20.5m / 67ft 25.5m / 83.5ft 30.5m / 100ft 35.5m / 116.5ft NOTE: Light Intensities Are Measured Directly Below The Fixture Using Clear Lens. All Values Have ±5% Tolerance.

RoHS compliant

IP68

www.lightemittingdesigns.com e-mail: info@lightemittingdesigns.com

RWL 3525 Series

LED Roadway Lighting - 35Watt

Illumination Levels - Type VI Rectangular / Medium 41Lux / 3.5fc 8m / 26ft 56Lux / 5.5fc 7m / 23ft 72Lux / 7fc 6m / 20ft 108Lux / 10.5fc 5m / 16.5ft

6.5m / 21.5ft

9.0m / 29.5ft

11.5m / 37.5ft

14m / 45.5ft

16.5m / 53.5ft

148Lux / 13.5fc 4m / 13ft

15.5m / 51ft 20.5m / 67ft 25.5m / 83.5ft

30.5m / 100ft

35.5m / 116.5ft

NOTE: Light Intensities Are Measured Directly Below The Fixture Using Clear Lens. All Values Have ±5% Tolerance.

RoHS compliant

IP68

www.lightemittingdesigns.com e-mail: info@lightemittingdesigns.com

RWL 3525 Series

LED Roadway Lighting - 35Watt

Lumen Maintenance Factor (LMF) Current

Total Watts * No. of LED’s

500mA

Hours

Ta 25°C (77°F)

Ta 30°C (86°F)

Ta 40°C (104°F)

Initial LMF

1.00

0.99

0.97

20K hours (real life)

0.94

0.91

0.89

35K hours

0.92

0.89

0.87

50K hours

0.89

0.88

0.86

NOTE: All Values Have ±5% Tolerance * Total watts are calculated by the average watts at 120 & 277VAC

All Light Emitting Design light fixtures have a lumen maintenance factor (LMF) that takes into account the reduction of luminous flux due to the aging of the light fixture. LMF signifies the ratio of the light fixture lumens at a specific time and a new value. Light Emitting Design considers thermal management as the key factor in maintaining the highest possible luminous flux in all its fixtures. Displayed above is the lumen maintenance factor LMF for each specific product. Light Emitting Design R&D team with its extensive experience has conducted numerous in-house tests with the specified finished fixtures on long term lumen maintenance. The tests were conducted at Light Emitting Design’s facility in real life environments for a period of over two years or 20,000 hours. Real life lumen maintenance values were obtained for the period of 20,000 hours. Calculated test results were obtained for 35,000 hours and 50,000 hours by using industry applied standards such as IESNA LM-79, IESNA LM-80 and LED chip manufacturers data. LED chip package temperature measurement was acquired at the LED chip heat sink’s soldered junction point to the printed circuit board in a given luminaire at a specific stabilized ambient temperature. LMF data was predicted by using the junction temperature (Tj) in direct relation to the LED chip manufacturers LM-80 data.

RoHS compliant

IP68

www.lightemittingdesigns.com e-mail: info@lightemittingdesigns.com

RWL 3525 Series

LED Roadway Lighting - 35Watt

LED Driver Electrical Specification Constant-Current LED Driver with 0-10V Dimming Input Voltage

Max. Output Power

Output Voltage

Output Current

Efficiency

Max. Case Temperature

THD

Power Factor

Diming Method

Dimming Range

120/277 VAC nominal

38 W

25.5 VDC

1.5 A

~90%

90°C (measured at hot spot)

< 20%

> 0.9

0-10 V

10 - 100%

Features • Compatible with 0-10 V dimmers • 120 / 277 VAC nominal input voltage • Active power factor correction (PF) ≥ 0.9

Dim + (RED)

Dimming Dim – (GRAY)

• Very high efficiency: ~90%

ACN (White)

• 10% to 100% dimmable output • Protections: output open load, over-current and short-circuit (hiccup), and over-temperature with auto recovery • Conducted and radiated EMI: FCC CFR Title 47 Part 15 Class B and EN55022 (CISPR 22) Class B compliant • Enables ENERGY STAR® and DLC (DesignLight

AC Input ACL (Black) Ground (Green)

APPLICATION DIAGRAM

Consortium®) luminaire compliance • Thermo-silicone potted IP65-rated metal case • Small footprint high density LED driver • 90°C maximum case hot spot temperature • 50,000 hours lifetime at 70°C case hot spot temperature • Class II power supply • Worldwide safety approvals

METAL CASE

RoHS compliant

IP68

www.lightemittingdesigns.com e-mail: info@lightemittingdesigns.com

RWL 3525 Series

LED Roadway Lighting - 35Watt Input Specification Units

Minimum

Typical

Maximum

Input Voltage Range (Vin)

VAC

120/277

305

Input Frequency Range

Power Factor (PF)

0.9

> 0.9

–

At full load and nominal input voltage 0.33 A @ 120 VAC 0.16 A @ 277 VAC

Input Current

Inrush Current

50 A peak

μA

250 μA @ 120 VAC 600 μA @ 277 VAC

Leakage Current Input Harmonics

Notes

At any point on the sine wave and 25°C Measured per IEC60950-1

Complies with IEC6100-3-2 for Class C equipment

Total Harmonics Distortion (THD)

20% –

Efficiency

–

90%

• At nominal input voltage and nominal LED load • Complies with DLC (DesignLight Consortium) technical requirements v1.7 At nominal input voltage

Meets UL60950-1 for class II reinforced/double insulation power supply

Isolation

Output Specification Units

Minimum

Typical

Maximum

Output Voltage (Vout)

VDC

Output Current (Iout)

1460

1500

1540

Output Current Regulation

-5

±2.5

Measured over the output voltage operating range defined by the Vout Min and Vout Max of the ordering information table.

Output Current Overshoot

–

The driver does not operate outside of the regulation requirements for more than 500 ms during power on with nominal LED load.

< 45% peak-to peak of rated output current

Ripple Current

10%

Dimming Start-up Time

Notes

100% 500

The output current is >50% of rated output current within 500 ms of the application of AC power being applied. This is to be measured without dimmer attached and at nominal input voltage and nominal load.

Output Controls Start-up Time

RoHS compliant

A dimming input can be used to adjust the output setting via a standard commercial wall dimmer, an external control voltage source (0 to 10 VDC), or a variable resistor when using the recommended number of LEDs. The dimming input permits 10% to 100% dimming.

IP68

www.lightemittingdesigns.com e-mail: info@lightemittingdesigns.com

RWL 3525 Series

LED Roadway Lighting - 35Watt Protection Features

Output Open Load, Over-Current and Short-Circuit Protection (hiccup), and Over-Temperature Protection with Auto Recovery

Environmental Conditions Units

Minimum

Typical

Maximum

Notes

Operating Case Temperature (Tc)

°C

-30

+90

Storage Temperature

°C

-40

+85

Non-condensing

Measured at a distance of 3 feet (91+cm), without and with approved dimmers.

Humidity

Cooling

Case temperature measured at the hot spot •tc on label

Convection cooled

Acoustic Noise

dBA

Mechanical Shock Protection

per EN60068-2-27

Vibration Protection

per EN60068-2-6 & EN60068-2-64

MTBF

> 250,000 hours when operated at nominal input and output conditions, and at Tc ≤ 70°C

EMC Compliance and Safety Approvals EMC Compliance Conducted and Radiated EMI

FCC CFR Title 47 Part 15 Class B and EN55022 (CISPR 22) Class B compliant

Harmonic Current Emissions

IEC61000-3-2

Voltage Fluctuations & Flicker

IEC61000-3-3

Immunity Compliance

Transient Protection

For Class C equipment

ESD (Electrostatic Discharge)

IEC61000-4-2

8 kV contact discharge, 8 kV air discharge, level 4

RF Electromagnetic Field Susceptibility

IEC61000-4-3

3V/m, 80 - 1000 MHz, 80% modulated at distance of 3 meters

Electrical Fast Transient

IEC61000-4-4

± 2kV on AC power port for 1 minute, ±1kV on signal/control lines

Surge

IEC61000-4-5

± 1kV line to line/±2kV line to earth on AC power port, ±0.5kV for outdoor cables

Conducted RF Disturbances

IEC61000-4-6

3V, 0.15-80MHz, 80% modulated

Voltage Dips

IEC61000-4-11

>95% dip, 0.5 period; 30% dip, 25 periods; 95% reduction, 250 periods

Ring Wave

ANSI/IEEE c62.41.1-2002 & c62.41.2-2002 category A, 2.5 kV ring wave Safety Agency Approvals UL8750 recognized

Approved for damp locations

UL60950-1 recognized

cUL

CSA C22.2 60950-1

EN61347-2-13 electronic control gear for LED Modules Safety

Hi Pot (High Potential)

RoHS compliant

Units

Minimum

VDC

4242

Typical

Maximum

Notes Insulation between the input (AC line and Neutral) and the output

IP68

www.lightemittingdesigns.com e-mail: info@lightemittingdesigns.com

RWL 3525 Series

LED Roadway Lighting - 35Watt Output Dimming Control

The method to dim the output current of the driver is done via the +Dim/–Dim Signal pins. The +Dim/–Dim Signal pins respond to a 1 to 10 V signal, delivering 10% to 100% of the output current based on rated current for each model. A pull-up resistor is included internal to the driver. When the +Dim input is <1 V or short circuited to the –Dim wire (grey) or to the –LED wire (black), the output current is programmed to 10% of rated current. If the +Dim input is >10V or open circuited, the output current shall be programmed to 100% of rated current. The maximum current supplied by the +Dim Signal pin is < 600 μA. The following graph shows the relationship of the output current to the dimming input voltage.

Iout (normalized to 100%)

Normalized Output Current versus Dimming Voltage

Dimming Voltage (V)

RoHS compliant

IP68

www.lightemittingdesigns.com e-mail: info@lightemittingdesigns.com

RWL 3525 Series

LED Roadway Lighting - 35Watt Outline Drawings

83.8 43.4

7.5

74.4

64.6

9.5

56 9.5 4.6

I/O Wires: Flying leads, 18 AWG on power leads, 22 AWG on control leads, 152 mm long, 105°C rated, stranded, stripped by approximately 9.5mm and tinned. All the wires, on both input and output, have a 300 V insulation rating.

Wiring & Application Diagram

Dim + (RED)

Dimming Dim – (GRAY) ACN (White)

AC Input ACL (Black) Ground (Green)

RoHS compliant

NOTE: • Ensure that all line voltage wire is intended for specified product wattage. • Use UL and / or CE approved wires for all input connections, minimum size required 18 AWG (0.82mm²) • Refer to the specific dimmer installation manual for exact wiring instructions.

IP68

www.lightemittingdesigns.com e-mail: info@lightemittingdesigns.com

RWL 3525 Series

LED Roadway Lighting - 35Watt

Surge Protection Wiring Diagram

AC POWER SOURCE

RoHS compliant

IP68

www.lightemittingdesigns.com Burbank, CA 91504 USA tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com

L.E.D. is a trademark of Light Emitting Design, Inc. ÂŠ 2014 Light Emitting Design, Inc. RWL3525-035REV012914 Data Sheet

RWLII

LED ROADWAY LIGHTING

ULTRA BRIGHT

HIGH TECH

DURABLE

RWL II Series

LED Roadway Lighting

Product Information The RWLII-75watt is the industryâ&#x20AC;&#x2122;s first technologically advanced low-profile LED street light, designed to replace existing high-pressure mercury, high pressure sodium, and metal halide lamp fixtures of much higher wattage classes. It is available in numerous choices of optics for a wide range of applications. The RWLII-75watt is constructed from high grade aluminum alloys and has an IP68 (waterproof) and petrochemical industry rating. Its Patented Air Bi-Pass Convection System enables excellent thermal management to ensure long LED life, with extended lumen maintenance and virtually zero fixture maintenance. It is a high efficacy fixture with Dark Sky compliant full cut off optical system enabling wide angle glare free lighting for most street lighting applications. Without any secondary optics the RWLII-75watt provides ultra-bright industry leading high efficacy fixtures, resulting in cost effective solutions with a short ROI period. It is designed to withstand harsh outdoor weather conditions with an unprecedented 7-Year Limited Warranty on the LED light engine. US PATENT #7,676,915 B2 / # 8,272,765 other US and international patents pending.

RoHS compliant

E351107

www.lightemittingdesigns.com 2541 N. Keystone St. Burbank, CA 91504 tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com

L.E.D. is a trademark of Light Emitting Design, Inc. ÂŠ 2012 Light Emitting Design, Inc. RWLII75REV082512 Data Sheet

IL 450II Series RWL

LED Roadway Lighting On-Site Service & Maintenance Access

Integrated Smart LED Driver Up to 94% Efficient

IP68 Certified Waterproof Rated Fixture

Proprietary Manufaturing Technology Using Only the Highest Grade Alloys

Patented MCPCB Technology Enables Low LED Junction Temperatures for Maintenance Free Long Life

Technologically Advanced High Brightness LED Chip

Patented Air-Flow Convection ® System Minimizes Heat and Maximizes LED life When Used in Environments Exceeding(50°C)122°F

Proprietary Reflector and Optical System Maximizes Light Output Efficiently

Benefits of LED Lighting • Ultra low energy consumption resulting in a more green and sustainable environment • Up to 40 - 60% savings compared to mercury / sodium & metal halide lamps of higher wattage • Eliminates unnecessary service and repair costs

Advantages of RWL II • Technologically Advanced, low profile design • Ultra bright industry leading High Efficacy (lm/W) • Proprietary Optical Diffuser System enabling wide angle glare-free lighting for most street lighting applications. Eliminating the need for costrly and fragile plastic lenses

• Minimal environmental hazard upon disposal

• Cost effective solution with a Short ROI Period

• Increased road visibility and safety

• Dark Sky Compliant / Full Cut-Off Optics

• No harmful Ultra-Violet rays

• Patented Advanced Integrated Thermal Technology enables

• Rugged - waterproof unit

low LED junction temperatures (Tj) for maintenance free

• No ballasts or cold start problems

long life

• Increased safety with minimal risk of fire hazards

• Available with Programmable and RF Wireless Dali Smart Control System enabling greater flexibility and maximizing savings for municipalities • First true industrial grade street light designed to withstand harsh outdoor weather conditions with IP68 (waterproof) rating and an exceptional 7-Year Limited Warranty

RoHS compliant

E351107

www.lightemittingdesigns.com 2541 N. Keystone St. Burbank, CA 91504 tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com

RWL II Series

LED Roadway Lighting Features • • • • • •

RWLII Street Light Module designed to last 70,000 hours with a minimum of 70% Lumen Maintenance High lumen output & high efficacy Available in neutral (4000K) / cool (5000K)white IP68 (Waterproof) rated fixture Fu l l Cu t -Off optical system with no glare or light pollu tion Ideal application for 6 to 9 meters pole height with a pole pitch of 15 to 30 meters

El ec t r o n i c s • • • •

Ho u s i n g

Op t i c s

•

Patented Is o l at ed M em b r an e Heat S i n k ®Sy s t em with 360° high-flow convection designed to spread the heat away from the hot-zo n e thereby minimizing the LED junction temperature when used in environments exceeding 50°C (122°F)

•

Powder coated with industrial grade Du r a-Gu ar d double layer epoxy for year round outdoor application with industry leading 10 years protection on weather and corrosion

•

Fu l l C u t -Off proprietary reflector and optical system providing powerful glare-free uniform lighting

External Dimensions Ø465mm 18-1/4"

224mm 8-7/8"

RoHS compliant

E351107

www.lightemittingdesigns.com 2541 N. Keystone St. Burbank, CA 91504 tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com

RWL II Series

LED Roadway Lighting

Ordering Information : RWLII

WWW

Series

Wattage

Reflector *

Lens* LL = Linear Lens CL = Clear Glass Lens

050 = 50Watt 075 = 75Watt 100 = 100Watt 120 = 120Watt 160 = 160Watt

02 = Type II 05 = Type V H5 = Type V High Power

CP = Clear Plastic Lens

CCT

Exterior Color

Driver

40 = 4000K 50 = 5000K

G = Grey S = Silver

ND = Non-Dimmable DM = Dimmable DL = Dali Control

* Lens & Reflector Combinations Available: LL-02 / CL-02, 05, H5 / CP-02, 05, H5

Example : Part Number RWLII-075-02LL5002G-DM

Part Description 110-305VAC Road Way Light / 75W / Type II, Linear Lens / 5000K Cool White / Grey / Dimmable

Packaging Information : Case Quantity 1

RoHS compliant

Dimensions(LxWxH) 55 x 55 x 29.5cm 21.7 x 21.7 x 11.5in

Weight 13kg 28.6Ibs

E351107

www.lightemittingdesigns.com 2541 N. Keystone St. Burbank, CA 91504 tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com

L.E.D. is a trademark of Light Emitting Design, Inc. ÂŠ 2012 Light Emitting Design, Inc. RWLII75REV082512 Data Sheet

RWL II Series

LED Roadway Lighting - 75Watt Comparison Chart Type of Light Fixture

RWLII High Bay

Metal Halide (250W)

High Pressure Sodium (250W)

T5 Fluorescent (144W)

Total System Wattage

75W

290W

173W

Average Lamp Life

75,000

10,000

30,000

Maintenance Savings

$35,000

$10,000

Annual Energy Savings

$18,834

$8,585

Annual Kwh Savings

94, 170kWh

94,170kWh

42,924kWh

Carbon footprint Savings / Year

47,085kg

21,462kg

Return of Investment

1.71 years 20.53 months

3.73 years 44.77 months

* All figures are typical and based on calculations provided by the United States Environmental Protection Agency NOTE: All Values Have +-5% Tolerance

Compliance and Certifications

Application • TYPE II Wide Street Lighting • TYPE V Round • Parking Lots • Perimeter Lighting • Parks and Walkway Lighting

RoHS compliant

Certification

IP68

Compliance No.

Web Link

E351107

Access

PSE100-0613

On File

HN80021/2011

On File

E351107

www.lightemittingdesigns.com 2541 N. Keystone St. Burbank, CA 91504 tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com

RWL II Series

LED Roadway Lighting - 75Watt Specification System Watts *

75 Watt 8,400 Lumens

Lumens (Total) ** Efficacy ***(Neutral / Cool)

112 Lumens / W

Number of LEDs & Driving Current

60@ 375mA

CRI

75 (Neutral); 70 (Cool)

Light Beam Angle

TYPE II & TYPE V 48°C

TJ - Junction Temp (Ta @ 25°C)

Optional

Dimmability / DALI

90%

Driver Efficiency Warranty

5-Year LED Driver / 7-Year LED Light Engine

Operational Temp/Storage Temp.

- 40 ~ + 50°C / - 40 ~ + 80°C

Humidity

IP68 (waterproof)

Illumination Levels

122Lux / 11fc

20ft

17m / 56ft

92Lux / 8fc

23ft

20m / 65.5ft

73Lux / 7fc

26ft

23m / 75.5ft 34Lux / 3fc

29.5ft

26m / 85ft NOTE: All Values Have +-5% Tolerance

RoHS compliant

E351107

www.lightemittingdesigns.com 2541 N. Keystone St. Burbank, CA 91504 tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com

RWL II Series

LED Roadway Lighting - 75Watt Lumen Maintenance Factor(LMF) Current

Total Watts * No. of LED’s

375mA

Hours

Ta 25°C (77°F)

Ta 30°C (86°F)

Ta 40°C (104°F)

Initial LMF

1.00

0.99

0.96

20K hours (real life)

0.97

0.95

0.90

35K hours

0.95

0.91

0.87

50K hours

0.90

0.88

0.85

NOTE: All Values Have +-5% Tolerance * Total watts are calculated by the average watts at 120 & 277vac

RoHS compliant

E351107

www.lightemittingdesigns.com 2541 N. Keystone St. Burbank, CA 91504 tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com

RWL II Series

LED Roadway Lighting - 75Watt LED Driver Electrical Specification IP65 IP67

Model : PND - 075W - 020 - 3750 20V DC VOLTAGE 3.75A RATED CURRENT 75W RATED POWER 5%Vo RIPPLE & NOISE (pk-pk) OUTPUT + 1.0% VOLTAGE TOLERANCE Note.3 + LINE REGULATION - 1% + LOAD REGULATION - 3% 0.4 Sec @ 95% load 230VAC; 0.8 Sec @ 95% load 115VAC SETUP, RISE TIME Note.4 90 ~ 305VAC VOLTAGE RANGE 47 ~ 63Hz FREQUENCY RANGE POWER FACTOR (Typ.) PF>0.98/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (Please refer to "Power Factor Characteristic" curve) INPUT 89% EFFICIENCY (Typ.) 0.9A / 100VAC 0.42A / 220VAC AC CURRENT COLD START 50A/230VAC INRUSH CURRENT (Typ.) <1mA / 277VAC LEAKAGE CURRENT 95 ~ 108% OVER CURRENT Protection type: Constant current limiting, recovers automatically after fault condition is removed Constant current limiting, recovers automatically after fault condition is removed SHORT CIRCUIT 23 ~ 30V PROTECTION OVER VOLTAGE Protection type: Shut down o/p voltage with auto-recovery or re-power on to recovery 100°C + - 10°C(RTH2) OVER TEMPERATURE Protection type: Shut down o/p voltage, recovers automatically after temperature goes down 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes ENVIRONMENT VIBRATION SAFETY STANDARDS

SAFETY & EMC

NOTE

Note.6

WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY

UL8750 Compliance to UL 1310 Class2, UL1012 UL935, CSA C22.2 No. 0, CSA C22.2 No. 107.1, CSA C22.2 No. 250.0, EN61347-1, EN61347-2-13 I/P-O/P: 2.5KVAC I/P-FG: 2.5KVAC O/P-FG: 0.5KVAC I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC / 25°C/ 70% RH Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2 Class C (≧50% load) ; EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV), criteria A

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltages. Please check the static characteristics for more details. 6. Safety and EMC design refer to EN60598-1, CNS15233, GB7000.1, FCC part18. 7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time. 8. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 9. Refer to warranty statement.

* Available in 480VAC input

RoHS compliant

E351107

www.lightemittingdesigns.com 2541 N. Keystone St. Burbank, CA 91504 tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com