Thermoformed trays
D+Sutur is proud to present the thermoformed plastic tray, a stateof-the-art system to improve the transport, handling and storage of any type of bottle while optimizing space. Environmentally friendly, clean, cost effective and economical. This type of tray has proved to be the best solu-
tion for the storage, handling and transport of any kind of glass container, especially for all types of wine bottles.
Manufacturers of products which are packed
or bottled in glass containers, know from experience that unfortunately part of their products
never reach the market as they are destroyed or damaged during handling, storage or distribution, causing considerable financial losses.
Fully aware of this problem, we have redefined
the concept of bottle storage by creating thermoformed plastic trays. These cushion each bottle perfectly and as lateral movements are eliminated, there is no contact between the bottles therefore avoiding unwanted breakages. We offer all of this at an optimal cost for the manufacturer.
Specifications and storage capacity of the trays
Rimaplast Article
Wine 36
Sparkling 36
Type of bottle
Bordeaux Hock Burgundy
Measurements (In/m)
Plastipack
Sparkling 38
Mix 42
Magnum 28
13 x 14
12 x 10
Sparkling Burgundy
Sparkling
Bordeaux Burgundy Hock Sparkling
Sparkling Burgundy 1,5 l.
Bordeaux
Sparkling
32 x 48”/ 0,8 x 1,2
32 x 48”/ 0,8 x 1,2
32 x 48”/ 0,8 x 1,2
40 x 48”/ 1,0 x 1,2
40 x 48”/ 1,0 x 1,20
44 x 48”/ 1,1 x 1,20
44 x 48”/ 1,1 x 1,20
No. of bottles per tray
36
36
38
42
28
182
120
No. of trays per pallet
15
20/15
20
15/20
20
4
5
No. of bottles per pallet
540
720/540
760
630 / 840
560
728
600
No. of stacked pallets
3
4/3
4
3/4
4
3
4
Minimum bottle height (In/m)
11” / 280
11,6” / 295
11,6” / 295
11,6” / 295
13,94” / 354
-
-
Maximum bottle height (In/m)
13” / 330
11,8” / 300
11,8 / 300
13” / 330
15,35” / 390
-
-
Minimum diameter (In/m)
2,67” / 68
3,23” / 82
3,46” / 88
2,67” / 68
4,21” / 107
2,87” / 73
3,42” / 87
Maximum diameter (In/m)
3,19” / 81
3,50” / 89
3,50” / 89
3,50” / 89
4,52” / 115
2,95” / 75
3,50” / 89
Conicity
Optional
-
-
Optional
-
Optional
-
The characteristics of the most common trays can be seen in this table, but we also have a wide range of trays available for special bottles. The measurements of the bottles are used for guidance only, as each case can be determined based on the individual design of the bottle in question.
Rimaplast Made of plastic material, it is designed so that bottles are placed horizontally, thus eliminating the need for additional strapping for handling and transport. It acts as a protector by avoiding contact between the bottles. The result is a solid, compact and stable structure which greatly facilitates handling. DIFFERENTIAL CHARACTERISTICS - Long-life and maintenance free. - Its design allows storage space to be optimized. - Investment is significantly reduced. - No TCA contamination. - Can be used for all shapes and sizes of bottles. - Made of recyclable material which is environmentally friendly. - Easy to clean. - Can be used interchangeably in automatic or manual processes. - The design prevents bottle breakages
Plastipack It is made from a plastic sheet structure, which has been thermoformed creating protuberances and cone-shaped holes, which mean that the different storage layers fit together perfectly. The bottles are held and protected by their base and neck, avoiding any type of contact or abrasion between them. The main advantage of this system is that it allows the whole group of bottles be turned at the same time, and can be placed directly on the gyropalette DIFFERENTIAL CHARACTERISTICS - Long-life and maintenance free. - Investment is significantly reduced - No TCA contamination. - It can be made to measure to fit any type of container. - Made of recyclable material which is environmentally friendly. - Easy to clean. - Adaptable to gyropalette size
Our company was founded in 1992, dedicated to the creation and production of plastic for the storage, handling and transport of any kind of product. At the beginning, we were specialized in the automotive industry, but some years later due to advances in our technical knowledge and research, we decided to undergo a strategic change. We started to allocate the largest part of our production to the manufacture of plastic trays designed to optimize the storage and handling of all types of wine bottles. Due to our growth over the last few years, in 2011 we extended our premises and incorporated the extrusion process which has allowed us to guarantee the supply and quality of our raw materials as well as offering greater flexibility and service to our customers. Thanks to the manufacturing process in place, we are able to recycle almost all of the leftover material which we generate. We are present in the major wine-producing markets, both nationally and internationally and we continue to develop new applications in order to optimize our range of products.
D MAS SUTUR, SL
Josep Comas i Solà , 22 B (P.I. Bufalvent) 08243 Manresa (Barcelona) dmassutur@dmassutur.com • www.dmassutur.com