Dental Guide System
Are you using the guide system? You’re not?
Why? Too expensive ? Too complicated ? Uncomfortable? Limited usage of implant? We can help you solve these.
Change your mind that implant guide system is still expensive, difficult and complex!
Dental Guide System
for User
More
Digital Technology DENTIS offers solutions focused on predictability, reduced risk and enhanced outcomes: from 3D treatment planning of your case, to implant site preparation with the Simple Guide System, to ZENITH 3D Printing System.
Simple Guide System
for Patient Safer, reduced chair time and better esthetics outcome.
Dental Guide System
SIMPLE GUIDE
Optimize the restorative outcome • Offer high esthetics and function to your patients with a comprehensive range of prosthetic solutions.
Predictable implant placement • Make your treatment plan a clinical reality with customized surgical templates.
Experience powerful diagnostics and treatment planning • Avoid surprises during the treatment process through careful diagnosis and treatment planning with the open software. DENTIS would provide you proper education.
Increase patient satisfaction • Achieve the best possible outcome even you have different implant systems.
Simple Guide System (vs) General implant surgery Description
Gingival incision
Temporary prosthetics
Chair time
Recovery period
Simple Guide
No need
CAD/CAM or 3D Printer
SHORT
No need
General implant surgery
Need
Dental Laboratory
LONG
Need
Guide Surgery Work Process Diagnostics
CT & Scanning
3D diagnostics and treatment planning
Making surgical guide by ZENITH 3D Printer
Guide Surgery
Finish everything of your case within a day with ZENITH 3D printing system.
1
Clinical diagnostics and treatment acceptance
2
Make a (CB)CT scan and digitize patient’s information by oral scanner or model scanner.
Examine & diagnose your patient and get treatment acceptance from your patient before making further investments
3
3D diagnostics and treatment planning Visualize the patient’s (CB)CT data together with the intra-oral situation including soft tissue and the diagnostic tooth setup by Blue Sky Plan.
5
CT & Scanning
4
Making surgical guide Extract the data after planning and make surgical guide by ZENITH 3D printer You can easily, quickly and economically make surgical guide by yourself in your clinic
Guide surgery Go for fully guided drilling and implant insertion using a customized surgical template based on your treatment plan.
Universal Surgical Guide Kit! DENTIS Simple Guide Kit can be used with other implant system.
6
Surgical guide
Point drilling (Cortical Drill)
Initial & Path drilling
Remove surgical guide
I SIMPLE GUIDE
Go for final drilling according to the sequence of each implant system.
DISTINCTIVENESS
1
Economic
Simple
Convenient
Universal
Economic System
2
Simple Guide System is being conducted with only 11 surgical tools matching and drilling simply. ■ Simple surgical kit ■ Simple process ■ Simple drilling protocol
DENTIS Simple Guide System is cost-effective compared with other guide systems ■ Free software ■ Simple surgical tools ■ ZENITH 3D Printing System
3
Convenient System Simple Guide System applies the Open-Sleeve showing enhanced convenience and allowing water-irrigation to prevent over-heating. ■ Open sleeve ■ Good irrigation
Simple System
4
Universal System DENTIS Simple Guide Kit can be used with not only DENTIS implant, but also every implant system in the world. ■ All implant system ■ Flap or flapless surgery
SIMPLE GUIDE I
7
Economic Guide System
01
Free Software There is no extra charge at all for the software
Software Download https://blueskybio.com/pages/blue-sky-planguided-surgery-software
8
02
Simple Surgical Kit
03
ZENITH 3D Printing System
Simplified components reduce the cost of surgical tool.
Production cost is remarkably reduced by extracting data from the software and making surgical guide in your clinic with ZENITH 3D printer.
I SIMPLE GUIDE
Simple Guide System
01
Simple Surgical Kit
02
Simple Process
DENTIS Simple Guide Kit is only made up by 11 surgical tools, while the other systems are made up by dozens of surgical tools.
Process is simpler than general guide system and adjustment by oral scanner is also easier.
1 Diagnostics
03
2 CT & Scanning
3 3D diagnostics and treatment planning
4 Making surgical guide
5 Implant surgery
Simple Drilling Protocol Drilling protocol became much simpler because there is no need to use tissue punch and drill guide. Just remove surgical guide after ÎŚ2.8 drilling, and place an Implant according to the procedure of each implant system.
Tissue punch
Drill guide
Tissue punch function SIMPLE GUIDE I
9
Convenient Guide System
01
Open Sleeve Side approach allows drilling in low occlusal height of posterior teeth.
Ø7.5
Ø4
3mm
6mm
5mm
Ø5.5
Approach
10
Approach
Common sleeve
Open Sleeve
Occlusal Approach
Side Approach
Hand-piece can get stuck in the antagonistic teeth.
Hand-piece doesn’t get stuck in the antagonistic teeth.
I SIMPLE GUIDE
Open part of the sleeve allow water-irrigation preventing over-heating.
02
ZENITH 3D Printing System Manufacture the accurate surgical guide in your clinic by yourself!
Sending CT and scan data
Dental Clinic
Simulation
Confirmation of Diagnostics
Making surgical guide (about 5 days) Common guide system
Dental Lab Center
Dental Clinic
Every process by one stop service.
DENTIS Simple guide system
SIMPLE GUIDE I
11
Universal Guide System
01
DENTIS Simple Guide System is compatible with any other implant systems in the world.
02
Flapless surgery is recommended basically, but flap surgery can be possible according to your case.
Place your Implant according to the procedure of each implant system
Sleeve + Surgical Guide 10mm
Surgical Guide Tissue Bone
Cortical Drill
Ø2.3 x 8mm Starter Drill
Ø2.2 Pilot Drill
Ø2.8 x 8mm Intermediate Drill
Simple Guide Drill
12
A
Starter drill (Ø2.3x8mm) and Intermediate drill (Ø2.8x8mm) are just 8mm.
B
Ø2.2 Pilot drill is for depth extension
•Made up by 10, 12, 14mm •Choose proper drill according to fixture’s length
C
Ø2.3 → Ø2.2 drilling
•Ø2.2 drilling • For smooth drilling and maintaining path (0.1mm gap) when you drill a Ø2.2 hole for depth extension after Ø2.3x8mm drilling. •Simplification of kit composition
I SIMPLE GUIDE
Only 11 components for Simple Guide Surgery!
Simple Guide Surgical Kit
DGATD
DCD
DSGD2308
DSGD2210
DSGD2808
Anchor Drill
Cortical Drill
Ø2.3 X 8mm Starter Drill
Ø2.2 x 10mm Pilot Drill
Ø2.8 x 8mm Intermediate Drill
Sleeve
Planning S/W
DSGDR
(Blue Sky Plan) www.blueskybio.com
GIOKE
Anchor Screw
Mount Driver
Ø2.2 x 12mm Pilot Drill
Ø2.2 x 14mm Pilot Drill
DSGD2212
DSGD2214
Ø3 18mm
DGAS18
DRHDL24
SIMPLE GUIDE I
13
DIGITAL DENTISTRY with
ZENITH® 3D Printing System
Surgical Guide
Clear Aligner
ZENITH® 3D Printing System
Dental Model
Efficiently, effectively, and professionally produce the superb results by ZENITHⓇ 3D Printer
14
I SIMPLE GUIDE
Wax-up
http://dentisimplant.co.kr/eng/
DENTIS Co., LTD. (Headquarters)
DENTIS USA
DENTIS TAIWAN
Tel. +82-53-583-2804~5 Fax. +82-53-583-2806 99, Seongseoseo-Ro, Dalseo-Gu, Daegu, Korea Tel. +1-323-677-4363~5 Fax. +1-323-677-4366 6 Centerpointe Drive, Suite 600 La Palma CA 90623 Tel. +886-2-2808-5933 Fax. +886-2-2624-2309 2F.,No.48,31,Minzu Rd., Tamsui Dist, New Taipei City 251,Taiwan(R.O.C.)
â“’2015 DENTIS CO.,LTD. All Right Reserved. Specifications are subject to change without notice. Trademarks are the property of DENTIS CO., LTD. Or their respective owners.
D-C-SG-V2-201506-ENG