SPEEDOMETER BOOKS RM6
Speedometers, 64 pages. Identifies speedometers and components used from 1909-27. Also offers sections on repairing, restoring and installing speedometers. Prepared and edited by the Model T Ford Club of America 12.00 each TAAS The Antique Automobile Speedometer, by Russ Furstnow. This book covers the history of the major manufacturers and early inventors. It includes specific information about speedometer assembly and components by year and manufacturer. It is 180 pages long with many photos, diagrams and copies of original sales brochures. 29.95 each TAAS-DVD The Antique Automobile Speedometer, by Russ Furstnow. In DVD form. 21.95 each STEW1 Stewart Warner, The World’s Standard Speedometer, installation and care, 8 page pamphlet,3-1/4 X 6-1/4. 2.95 each
WHEEL SPACERS and SCREW SETS
SP-WSE Wheel spacer and screw set, 8 piece set. 1/2” long brass spacers 1909-10 SP-WSE1 Wheel spacer and screw set, 8 piece set. 3/4” long brass spacers 1911-12 SP-WS Wheel spacer and screw set, 6 piece set. 3/4”long brass spacers 1913-25
9.10 set 9.10 set 9.10 set
TAAS
rm6
stew1 taas-dvd
sp-wse SPG1E
STEWART GEARS and BRACKETS SPG1E
Speedometer Gear for Stewart #1 Swivel, 16 tooth 8 pitch, solid brass. Uses cotter pin to hold it onto swivel. Used from 1909 thru March 1911 1909-11 87.50 each SPG1E1911 Speedometer Gear for Stewart #1 Swivel. 1911 style that is counter-bored and uses special lock nut and washer that holds the gear to the swivel. 16 tooth 8 pitch, made of solid brass. 1911 89.95 each SPG1 Speedometer gear, 16 tooth, 8 pitch, for Stewart Warner swivels (mates with 60T, 8P wheel gear). 23.95 each SPG-22 Speedometer #22, Stewart wheel gear (road gear), stamped solid brass, 60 tooth,8 Pitch, (brass original for 1909-12, but this gear can be used on later T’s). 1909-12 99.95 each SP1913GS Gear set for the Stewart swivel with a 2-1/2 to 1 right hand gear ratio. This set contains two pieces: the input shaft with spiral gear and the intermediate gear. The output shaft with bevel gear is not included as it receives little wear. 294.95 each SPG490S Stewart Model 490 drive unit, bracket, and wheel gears, for wire wheels only. 1926-27 295.95 each SPG490C Stewart Model 490 speedometer cable, 60”, 3/4” male and 7/8” female threads. 1926-27 112.95 each
SPG-22
SP1913GS
SPG1E1911 SPG490C
FORD SPECIAL GEARS and BRACKETS
NOTE: Ford used these in 1914-15. They were also supplied as an aftermarket accessory up to 1918. The Ford Special speedometers are driven with a direct drive instead of a swivel and are unique in that they run 2000 RPM at 60 mph. These parts are suitable for any “Ford Special” speedometer, regardless whether it is a Jones, Stewart, JohnsManville, Sear Cross, Corbin, Standard Thermometer Co.
1516S 6227X
6262X SPG-FS 6225X
SPG490S Stewart and Ford Special speedometer drive mounting set, mounts behind front axle, clamps on spindle arm. Uses shorter cable than part# 3986S 1915-25 159.95 set Ford special speedometer mounting bracket, (pinion support with nut) holds the Ford special straight drive. It mounts in the hole in the spindle arm. 64.95 each Ford special speedometer straight drive, mounts on part #6227X and speedometer cable 6262X attaches to this. 99.95 each Ford Special swivel gear, 12 tooth, 8 pitch. Made of black delrin for long lasting life, (mates with 35T, 8P wheel gear). 26.75 each 6225X Ford special road gear (pinion gear) laser cut, 35 tooth, 8 pitch. This is the gear that screws to the wheel. Runs well with a good fiber gear Part# SPG-FS. Used on Model T hubs with inside shoulder that were originally used on 1914-17 T’s 64.95 each
SPG1
1516S
6227X
SPG-FS
173