2/20 - 3/13, 2016
March
#4
Madness
PR 12,16,20
Slam Dunk Deals
Service. Trust. REsults.
®
MARCHONE MADNESS DEALS PRICE FOR 24 PIECES!
6 PIECE ROLL PIN PUNCH SET
∤∤Centers on the roll pin to protect pin or hole wall
∤∤Includes: 3/32” x 3 1⁄2”, 1/8” x 4”, 5/32” x
41⁄2”, 3/16” x 41⁄2”, 1/4” x 51⁄2” and 1/2” x 6”
$399
95
SAVE
168
$
6 PIECE CHISEL AND PUNCH SET
∤∤Set of long cold chisels and tapered drift punches ∤∤Set includes 1/2” x 9”, 5/8” x 12” and 3/4” x 14”
cold chisels and 1/8”, 3/16” and 1/4” drift punches
∤∤Includes sizes: 7/16”, 1/2”, 3/4”, 5/16”, 3/8”
12 PIECE PUNCH AND CHISEL SET
PNCHCHISBUND
∤∤Includes 4 cold chisels, 4 pin
Punch and chisel setS
∤∤Includes sizes: 3/32”, 1/8”,
∤∤ INCLUDES: SPRP6K, SLCDP6KA, SPL12KA
punches and 4 starter punches 5/32”, 3/8”, 1/2”, 5/8”
NEW! 2016 Calendar Merchandise SEE DETAILS - Page 2
2016 Calendar Girls
MERCHANDISE $2895 PDNV411
$3995
BANNER 3’ X 5’
∤∤100% polyester
PDNV405
with grommets
ALEXANDRA ZIPPO
Palm some of these
IMPACT SOCKETS
$234 90 SBUPM106V
3/8” DRIVE 10 PIECE METRIC 6 POINT UNIVERSAL IMPACT SOCKET SET
∤∤Sizes include: 10mm - 19mm
Long Parallel Nose Down Design Reach tight areas that straight or tapered nose sockets can’t for greater versatility.
$148 50 Save $26
SBPXY13V
3/8” DRIVE 13 PIECE SAE AND METRIC HEX BIT SOCKET SET
∤∤SAE: 3/16”, 7/32”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”; Metric: 4mm-7mm, 10mm, 12mm
SAVE
64
$
Opti-Torque System Applies torque to the fastener sides reducing corner round off, protecting fasteners from damage and applying more torque. 150° Chamfer on the socket and drive end for better grab, consistent pressure and easier use. Precision Manufacturing Process High performance alloy steel with advanced heat treating process and precise quality controls provides the ultimate in strength, durability and consistent performance.
$26095 SCPM306V
2
See your Matco Distributor for more details on products and ways to save.
pr
1/2” DRIVE 30 PIECE METRIC 6 POINT STANDARD AND DEEP IMPACT SOCKET SET
SLAM DUNK ONE PRICE FOR 101 PIECES
SAVE
104
$
*
polished
chrome finish
$31550 SABSE100P
pr
101 PIECE SILVER EAGLE GENERAL SERVICE SET
Spread your wings. Includes:
∤∤6 point SAE and metric sockets in
60 tooth
both standard and deep lengths
∤∤Metric and SAE combination wrenches ∤∤Spinner handle and universal joints ∤∤1/4” drive and 3/8” drive
ratchets
ratchets and extensions
Join us on
www.matcotools.com
3
THINK QUIK!
GET THIS $5010
Value
3/8” DRIVE QUIKBIT DRIVER SETS BUY THIS GET both
with the purchase of BSBTX7A
FOR only
$80
50 BSB7A
BSBTX7A
7 PIECE QUIKBIT SLOTTED AND PHILLIPS SET
7 PIECE QUIKBIT TORX SET
HEAVY-DUTY
$1,04295
CART WITH Full DrawerS Black (MSC4BKFD)
Fire Red (MSC4RFD) BLACK SILVER VEIN (MSC4SVFDA)
Sapphire blue (MSC4BLFD)
SAVE
268
$
STEALTH BLACK (MSC4SBFD)
TITANIUM (MSC4TFD)
Top lid tray ∤∤34.25”W x 20”D x 5”H ∤∤2 gas pistons that serve as a lid stay as well as raising the cart lid when unlocked
STORAGE SPACE ∤∤6 Drawers: Rows 1 - 3: 34.25”W x 20”D x 3”H Rows 4 - 5: 34.25”W x 20”D x 4”H Row 6: 34.25”W x 20”D x 5”H
BUMPERS ∤∤This deluxe full drawer service cart features four bumpers that help prevent dents and dings
SAFETY
locking and two non-locking
4
33.75”W x 39.5”H x 20”D
See your Matco Distributor for more details on products and ways to save.
pr
∤∤Four 5” x 2” casters with two
$38 50
∙∙ 72
tooth ratcheting wrench gains access where standard ratcheting wrenches will not fit with a minimal 5° swing arc
AFR6P
∙∙ Non-slip
FINGER RATCHET BIT DRIVER
box end
∤∤Ergonomic profile provides at least 1.5X the torque of competition
∤∤Use with any 1/4” drive bit as a ratcheting screwdriver
$10750
∤∤Pocket-size and full of strength
Save 11%
Get Organized
S7GRCM4
4 PIECE 72 TOOTH METRIC COMBINATION RATCHETING WRENCH SET ∤∤Includes sizes: 21mm, 22mm, 24mm, 25mm
$2695
Save 13%
SAVE
$5350
PRACKBLK
PLIERS/ WRENCH RACK
18
$
∤∤Plastic rack holds up to 13 tools ∤∤Two different sizes of slots to
accommodate varying sizes of tools
∤∤Front edge has indentations to hold tools upright
$11
50
Save 14% WRR12
12 SLOT STANDARD WRENCH RACK
∤∤Fits either SAE or metric wrenches
BFR472T
$4195
Magnetic
3/8” DRIVE MICRO 72 TOOTH RATCHET
∤∤Ideal for working in very tight areas ∤∤Overall length: 4"
MAGWRNCHM
14 PIECE METRIC WRENCH ORGANIZER
∤∤Magnets hold the wrenches
in and attach the organizer to metal surfaces ∤∤Holds 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm
$29950 Save $52
SRFBZXL82TA
$63
8 PIECE ZERO DEGREE FLEX HEAD RATCHET XL WRENCH SET
50
Save 12%
∤∤Zero degree offset box end and flex ratcheting end on extra long beam
∤∤Loosen or tighten any 6 point, 12 point, SA1P7R
1/4” DRIVE 7 PIECE PHILLIPS SCREWDRIVER BITS SET
spline, TORX, square and even up to 50% rounded off fasteners ∤∤Extra long beam for increased access ∤∤Includes sizes: 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”
pr
∤∤1 piece design allows access into the tightest areas
Join us on
www.matcotools.com
5
GAIN LEVERAGE
$212 95
Save $48
SBUPM62TB
3/8” DRIVE 6 PIECE METRIC 12 POINT UNIVERSAL IMPACT SOCKET SET
over other fixed head pry bars with a durable locking flex head
∤∤Opti-Torque applies torque to fastener sides, not corners ∤∤360° rotation gives easier access from any angle ∤∤Easy-to-read, high-visibility, laser-etched markings ∤∤Includes sizes: 10mm - 15mm
EACH SET
$8750
Indexable to 180°
SAVE
SCSG5B - GREEN SCSO5B - orange
22
$
$172
50
5 PIECE MULTI-PURPOSE SCRAPER SET
Save $42
$74 95
Save $16
IDPBSET2
2 PIECE INDEXING PRY BAR SET
IDP36O
∤∤Blades and shanks are produced from
36” indexable PRY BAR
heat-treated alloy steel for maximum strength and durability and precision ground for sharp parallel edges which can be sharpened ∤∤Blades are precision-ground for sharp parallel edges which can be sharpened ∤∤Includes sizes: (Scraper) 1” x 8”, 1 x 3 3⁄4”, (Angled Scraper) 5/8” x 31⁄2”, 3/4” x 8”, 9/16” x 4”
∤∤Indexing feature provides great flexibility with multiple positions ∤∤Ergonomic Matco handle for comfort and stability
∤∤Includes
SRPB3T
lengths: 8”, 16”
3 PIECE LINE-UP PRY BAR SET
∤∤The perfect set for body work ∤∤Featuring a line up shaft on the opposite end ∤∤Includes length sizes: 14”, 16”, 20”
$11750
Save $30
250 LB. CAPACITY
$23750
Save $41 MT950
AIR POWERED DENT PULLER
∤∤Instantly removes most dents without damaging paint ∤∤Gives you the power and versatility of a 3 lb. slide hammer
without marring the finish by welding or drilling body panels.
6
See your Matco Distributor for more details on products and ways to save.
pr
∤∤No drilling, welding or sanding required
ALL-STAR PLAYERS BOGO
GET both FOR only
$20350
Includes the most popular 3/8” chrome-plated sockets essential for automotive, aviation and heavy-duty applications
March Madness Slam Dunk Deals
BUY THIS GET THIS SBXYM10R
3/8” DRIVE 10 PIECE METRIC HEX BIT DRIVER SET
with the purchase of SBXYM10R
∤∤Includes sizes: 2mm,
2.5mm, 3mm - 10mm
$16555 Value
SBXY8R
3/8” DRIVE 8 PIECE SAE HEX BIT SOCKET SET
∤∤Includes sizes: 1/8”, 9/64”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, 3/8”
Hickory Handles
PUNCH
BOGO $16695 MBHS4
4 PIECE AUTO BODY TOOL SET
pr
∤∤Hickory handles with 2-wedge assembly system ∤∤Set contains: ∤∤Utility Pick Hammer ∤∤Door Skin Hammer ∤∤Curved Cross Chisel Hammer ∤∤General Purpose Pick Hammer
BUY THIS
GET both FOR only 95
$96
GET THIS with the purchase of SPC6PA
$3210 Value
SPC6PA
6 PIECE PUNCH & CHISEL SET
∤∤A basic set of punches and chisels ∤∤Includes sizes: 3/8”, 1/2”, 1/4”, 5/16” Join us on
PCHOB
PUNCH AND CHISEL HOLDER www.matcotools.com
7
$24595 Save $43
20,000 RPM
MT4883K
.75 HP RIGHT ANGLE DIE GRINDER KIT
$25595 Save $45
MT2868
STRAIGHT LINE SANDER
∤∤Dual piston design provides power to prevent stalling ∤∤Perfect for use in smoothing body filler on large flat surfaces ∤∤Equipped to use PSA style or clip style sanding accessories
∤∤.75 HP motor provides 20,000 RPM and powerful torque ∤∤Larger, easily accessible regulator knob to control power output ∤∤Kit contents include: .75 HP right angle die grinder and various surface prep accessories
∤∤Rear housing exhaust directs air away from work area
BLOW GUNS
∤∤ Tubes to blow particles and liquids for multiple applications within repair, body shops and factories ∤∤ Improved valve for better variable flow control
SPREAD YOUR WINGS $169
$4695
Save 14%
95
V1252
20” BENT NOZZLE BLOW GUN
Save $28
SE430K
SILVER EAGLE MINI DA SANDER KIT
$4550
Save 14%
∤∤Adjustable speed regulator ∤∤Two finger throttle ∤∤15,000 free speed ∤∤Kit includes: mini DA
V1152
13” BENT NOZZLE BLOW GUN
sander, 2” & 3” hook and loop fastener system pads and 2” and 3” 320 - 600 grit sandpaper
$4195
Save 14%
V1151
$17595
13” FULL FLOW STRAIGHT BLOW GUN
SE730K
SILVER EAGLE MINI POLISHING KIT
∤∤Polisher features rubber molded grip for comfort ∤∤Two finger throttle for easier control and less fatigue ∤∤Adjustable speed regulator to match speed to job ∤∤Kit includes: mini polisher, 3” hook and loop sanding pad, 31⁄2” buffing bonnet, 3” white compounding foam pad and 3” yellow compounding foam pad
8
$2050
Save 19%
V1051
4” FULL FLOW NOZZLE BLOW GUN
See your Matco Distributor for more details on products and ways to save.
pr
Save $29
SAVE
53
$
$34 95
$15995
MET13W
$299
95
1HP motor
MT3884 1
Save $30
ENGRAVING TOOL
∤∤Engraves on wood, plastic, aluminum, copper, brass, ceramics, stone, iron, glass and other materials ∤∤120 VAC 60 Hz engraving tool ∤∤Tungsten carbide tip
1 HP 4 ⁄2” ANGLE GRINDER
MT1415K
PIN STRIPE REMOVAL KIT
∤∤Powerful, quiet air motor delivers .45 HP with minimal noise and vibration
∤∤Twin bearing spindle design provides steady, precise
∤∤Super high performance, industrial grade 1 HP motor
operation and auxiliary handle for greater control
∤∤Lightweight for ease of use while producing 2,600
for extra torque and extended durability ∤∤Industrial cut gear and constant self-lubricating oil wicking system for extra long life and quiet performance ∤∤Positive stop regulator for more versatile performance on all kinds of jobs
RPM for fast, efficient removal of pin stripes
GET A Small Toolbox
POWER DEAL!
with the purchase of MT2835A
GET both FOR only
$179
95
35 ft. lbs. maximum torque
BUY THIS
MT2835A
GET THIS
1/4" RATCHET
∤∤Composite housing design for comfort ∤∤Working torque: 5 - 30 ft. lbs. ∤∤Throttle lever with tapered valve provides speed control ∤∤Upgraded internal components provide added durability ∤∤Matco patented (US patent 6,305,246) head
MSBOXBL
Matco Small ToolBox
∤∤Classic Matco small toolbox with chrome trim ∤∤Features four working drawers. Drawer depth is approximately 11⁄4” ∤∤Size: 12” wide by 73⁄4” deep
design with built-in grease fitting
∤∤Built-in regulator to control power
pr
$8995 Value
Join us on
www.matcotools.com
9
GET THIS with the purchase of SE144
A BOGO THAT KEEPS YOU
DRILLIN’
$199
BUY THIS
$14195 Value MU3S
SILVER EAGLE 3/8" REVERSIBLE KEYLESS AIR DRILL
∤∤Ideal for a broad range of applications:
drilling, honing, hole sawing and reaming ∤∤Triple planetary gearing design gives added torque even at lower speeds ∤∤Muffled handle exhaust allows for more efficient, quiet operation
3 PIECE UNIBIT SET
.45 HP
∤∤Stepped design allows you to drill twenty-eight different hole sizes with just three bits
∤∤Three bits provide a range of hole sizes from 1/8” to
1,800 RPM
PRODUCT SPOTLIGHT
PLUG IN & DIAGNOSE
$3095
3/4”, plus 3/16” to 1/2” holes in material up to 3/8” thick
$8195
Save $14 RTK810
RELAY TEST JUMPER KIT
∤∤Includes four of the most
popular relay test jumpers to make testing relays or live circuits quick and easy on domestic and import vehicles ∤∤No need to pierce wires or connect multiple jumper wires ∤∤Simply remove relay to be tested, insert correct jumper and insert relay into jumper ∤∤Jumpers have tabs for clamping and flat pads to place test leads on
$7650
Save 14%
Save $13
WT600
DEUTSCH TERMINAL TOOL
RTK815
such as Caterpillar, Kenworth, Peterbuilt, Freightliner, Mack and Harley-Davidson motorcycles ∤∤Features three sizes of slotted tubes (14, 16 and 20 gauge) for working on different sizes of Deutsch terminals
∤∤Includes four jumpers to fit many popular relays
∤∤OEM electrical connectors work on trucks and equipment
10
RELAY TEST JUMPER KIT II
Great addition to the rtk810 kit
on Honda, Nissan, Toyota, newer Ford and GM mini micro relays as well as international trucks
See your Matco Distributor for more details on products and ways to save.
pr
SE144
GET both FOR only 95
DIAGNOSTICs that help you
CHECK YOURSELF
SAVE
46
$
$18750
MD319
MATCO ADVANCED MULTIMETER
∤∤Provides readings for volts, amps and ohms
required for automotive electrical system tests as well as diode and continuity tests ∤∤Selectable 4-stroke or 2-stroke DIs for RPM functions ∤∤Selection of 1 to 12 cylinders for dwell and IG-RPM readings ∤∤Fuel injection detector tests both TBI and PFI engines with user-selectable sensitivities
Quick Reference Chart Model
MD319 With Back-Light
a
5-Sec Fast Measurements, Fully Auto-Ranging
a
a
a a a a
a a a
Beep-Jack™ Input Safety Warning DCV and ACV 0.01mV to 1000V DCA and ACA 0.1μA to 10A Capacitance 60.00μF to 2000μF
$86
95
Save $15
MD251
Large 6,000 Counts LCD Display
$118 95 Save $33
CT60K
COMPRESSION TESTING SET
∤∤Performs compression testing on gasoline engines, motorcycles, marine and small engines
∤∤Kit includes: 25” flex hose with quick coupler, 21⁄2” gauge,
protective outer boot, 12” flex-14mm standard and long reach adapters and 18mm, 10mm and 12mm thread adapters ∤∤Dual scale gauge reads 0-300psi and 0-21 kg/cm2
$38 50
Type-K Temperature Readings (-50°C to 1000°C)
a
Selectable Cylinders for Dwell and IG-RPM
a
MD1669
ms-Fuel Injection Detector Function
a
∤∤Tests standard automotive electrical DC 6-24V circuits ∤∤When black ground clip is clamped to a suitable earth point and contact
Save 14%
CIRCUIT TESTER WITH CLIP, 6-24V
MD251
tip is placed onto testing sample, test bulb will glow if current is present
∤∤Needle point probe for easy back probing and piercing
MATCO BASIC MULTIMETER
∤∤Provides readings for volts, amps and ohms required for automotive electrical system tests as well as diode and continuity tests
∤∤Large 6000 counts LCD display with 5 second fast nominal update rate ∤∤Shorten the time to test with auto-ranging and manual-ranging override
$12650
$38 50 SMOKE30
Save 14%
UNIVERSAL FILLER NECK CONNECTOR
MD1646
EVAP system, eliminating the need for searching for the EVAP service port ∤∤Capless fuel system adapter works with your smoke machine to test EasyFuel™ capless fuel systems found on new Ford and Chrysler vehicle models
∤∤Checks high and low voltages on 6-12V and 24V circuits ∤∤Connect the red lead to a power source and
pr
∤∤Creates an air-tight seal with any vehicle’s
LED CIRCUIT TESTER, 6-12V AND 24V the black lead to a ground source
∤∤Tester will light up red for power and green for ground during testing
Join us on
www.matcotools.com
11
CONVENIENTLY POWERED & PERSONALIZED
TOOLBOX Ask your Matco Tools Distributor for more details.
EXTERIOR POWER OUTLETS
with 1-110V and 2-USB ports let you charge things like phones, tablets, cordless tools and more!
STRONGER & MORE DURABLE than the competition with our T-shelf construction and 6� 900 lb. casters to help support all your tools.
+
BUILT-IN POWER CHARGER DRAWER
Personalize it the way you like it with 13 colors and 2 trim options available.
Black Silver Vein
Blue Silver Vein
Copperhead
Fire Red
Outlaw Black
Sapphire Blue
gives you the convenience to organize cordless tools and charge up to 5 items simultaneously.
Crinkle Black
Chrome
12
Talon Orange Thunderstorm Gray
Metallic Burgundy
Pale Horse White
Supercharged Sliver
Matte Black
See your Matco Distributor for more details on products and ways to save.
pr
Sub Lime Green
MAGNETIC TOOL STORAGE Holds sockets, wrenches, pliers and more! Won’t scratch or mar surfaces
$5350 SE91947
SMART EAR LITE
∤∤High-tech solution for finding and pinpointing squeaks,
$34 15
∤∤Turn your smartphone or tablet into a state-
MTS12X6
rattles and noises anywhere within a vehicle of-the-art sound detection device
$2795
Save 14%
ear buds and dual port connector
RED MAGNA-STICK
∤∤Overall dimensions: 107⁄8” x 2 3⁄16” x 3/8”
MAGNA PANEL STORAGE SYSTEM
∤∤Kit includes: sound wand, aluminum probe,
MTS2X10R
∤∤Overall dimensions: 12” W x 6” D x 2” H
$484 95 6095TD
25 PIECE METRIC LARGE TAP & DIE SET
∤∤Complete metric set contains the taps, hex
dies and accessories needed for larger threading applications from 14mm - 24mm ∤∤Contains both 17⁄16” and 113⁄16” hex dies
$38 50
Save 14%
$124 50 MVP6870
FTT40
VACUUM BRAKE BLEEDER
MULTI-CUT CUTTER
∤∤37⁄8” stainless steel blade ∤∤Cuts auto trim, plastic tubing, rubber, belts and hoses
∤∤Blade tray slips into the handle for extra storage
∤∤Compact 1.3-quart (1.2-liter) capacity reservoir ∤∤Comfortable lever-action throttle with lock-on latch ∤∤Automatic shut-off prevents overfill ∤∤Universal bleed screw adapter conforms to most common bleed screw sizes
REMOVE PRESS-FITTED DRIVE PULLEYS $96
SAVE
40
$
$16350
50
SCDPT6
Save 14%
1/2” DRIVE 6 PIECE DEEP THIN WALL IMPACT SOCKET SET
MST4531A
HARMONIC BALANCER PULLER/INSTALLER
∤∤For easy removal of most harmonic balancers and drive pulleys which are press-fitted onto the crankshaft ∤∤Features a bearing-centered, circular 2/3-way flange and an assortment of
pr
metric and fractional bolts and adapters to provide wide coverage
Join us on
∤∤Includes five of the most common wheel
service impact sockets: 13/16”, 7/8”, 17mm, 19mm, 21mm plus a 3” impact extension ∤∤Strong, thin wall construction
www.matcotools.com
13
$33295 Save $58
$6995
ART903M
Save 12%
TELESCOPING ALUMINUM TRAM GAUGE
TS405
TIRE STEPS
∤∤Telescoping tram measures
∤∤Hangs over front or rear wheel for easy access ∤∤Fits tires up to 141⁄2” wide ∤∤211⁄4” wide
from 28” to 10’ ∤∤Measures in American standard and metric ∤∤Includes two short 5” pointers, two regular 11” pointers and two nylon storage bags
$18 95
Save 13% HTD4
12 PIECE TIP DRILL SET
∤∤Perfect for cleaning carburetor jets, injectors,
torch tips and service of gases and liquid jets anywhere a small diameter drilled hole is needed ∤∤Drill #s 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74
RECHARGEABLE SPRING HINGED BRACeLET
230
LUMENS
Detachable magnetic work stand is included
Save 18%
MWL40SMD
40 SMD CORDLESS LIGHT
∤∤360° rotating hooks on each end provide easy rotation ∤∤5-6 hrs. of continuous working time ∤∤Li-Ion rechargeable battery
14
See your Matco Distributor for more details on products and ways to save.
PDRMNV9
MOPAR WRENCH BRACeLET
∤∤Spring hinged bracelet with MOPAR logo etched, Metal
pr
$7695
$5295
NEW
$1499 PDMC336
CAPTAIN HAT
$2295 PDRMC23
Rat Fink NO FLY ZONE HAT
∤∤Embroidered logo on front, bill and both sides, hook and loop closure
MATCO APPAREL MORE SELECTION, LOWER PRICES.
SALT FLAT TEE
∤∤100% pre-shrunk cotton tee,
DEERSLAYER JACKET
screen print on front, Navy
∤∤100% double brushed cotton
PDMT403 (SIZE) ∙∙ Sizes: m-xl $17.53 ∙∙ Sizes: XXL-XxXl $21.43
duck shell with heavyweight insulation quilted lining ∤∤Embroidered logo on front PDMJKT68 (SIZE) ∙∙ Sizes: m-xl $139.95 ∙∙ Sizes: XXL-XxXl $154.95
RETRO WRENCH HOODIE
∤∤50% cotton/50% polyester ∤∤Screen print on front PDMS58 (SIZE) ∙∙ Sizes: m-xl $59.95 ∙∙ Sizes: XXL-XxXl $64.95
$2495 PDMC268
COLLEGIATE WRAP BEANIE
∤∤One size fits most
$61
95
TRIGGER ACTIVATED ASSIST KNIFE
SWMP1B ∤∤Handle: aircraft aluminum, blade: 2.9” (7.4cm) black Teflon
PDMC329
CAMO BEANIE CAP TRACK JACKET
∤∤100% polyester, soft, tricot body and sleeves ∤∤Embroidered logo on front
coated stainless steel, closed: 4.3” (10.9cm), weight 4.1 oz.
The sale of certain knives is illegal in some states and it is ultimately the responsibility of the distributor to know and obey the laws of the state and localities where he/she resides and sells tools. Matco does not defend or pay court costs associated with distributors breaking their state and local laws and the fees they incur in the defense of their actions.
pr
$2895
Join us on
PDMJKT21 (SIZE) ∙∙ Sizes: m-xl $79.95 ∙∙ Sizes: XXL-XxXl $84.95
www.matcotools.com
15
CORDLESS
STEP AWAY FROM THE OUTLET GET both FOR only
$190
95
BUY THIS
GET THIS with the purchase of ALCOB10
SINGLE PORTABLE STAND
SPSTAND ∤∤Handle size 7.8” x 11.4” ∤∤Base size 10.6” x 9.3”
ALCOB10
10W COB ALUMINUM CORDLESS LIGHT
Li-Ion rechargeable battery
∤∤Heavy-duty, die casting aluminum housing ∤∤Quick fastening for easier light head adjustment ∤∤160° horizontal rotation on base joint ∤∤IP65 dust and water resistant ∤∤2~2.5 hours continuous working time
$2645 Value
FRONT END SERVICE SET MST6295A
$18295 Save $32
PR0416RED
The products on Matco’s National Promo are limited in quantity and subject to availability. Prices in Puerto Rico, Alaska and Hawaii may vary due to additional shipping charges. Matco reserves the right to correct printing errors.
Comprehensive set for removal of most pitman arms, tie rod ends and ball joints found on automotive and light truck applications Two pitman arm pullers for large or small ball joint applications Join us on social media for Fan exclusive deals!
www.matcotools.com