Arrows & Components
HUNTING ARROW SELECTION CHART Selecting the Correct Hunting Shaft Size The Hunting Shaft Selection Chart will help you find the perfect shaft match for your bow—quickly and easily. Advanced, interactive Spine Weight Comparison and Hunting Shaft Selection Charts are now available online at www.eastonarchery.com.
1. Determining Correct Hunting Arrow Length
Bows with cut-out window. The Correct Hunting Arrow Length for bows with a broadhead cut-out sight window (including bows with overdraws) is determined by drawing back an extra-long arrow to full draw and having someone mark the arrow one-to-two inches in front of where the arrow contacts the most forward portion of the arrow rest. Correct Hunting Arrow Length 1"-2" clearance (minimum)
Place where arrow contacts most forward portion of the arrow rest.
Mark arrow here. Back of bow (far side)
Bottom of nock groove.
Belly of bow (face side)
0.874 0.880 0.780
2312 2215 2117 2020 400 400 3-39 400 460
0.423 0.420 0.400 0.426 0.400 0.400 0.440 0.400 0.460
Size Spine 600 500 400 340 300
Correct Hunting Arrow Length Belly of bow (face side)
Weight @29"
7.9 9.0 6.3
229 261 183
1913 1816 690
0.733 0.756 0.690
9.5 10.7 12.0 13.5 12.0 10.2 8.6 CAWT 7.3
276 310 348 392 348 296 249 CAWT 212
2215 2314 2117 2216 400 400 3-49 400 410
0.420 0.390 0.400 0.375 0.400 0.400 0.390 0.400 0.410
Group A 75 75 Rdln
Group G SS SS, 75 SS, 75 75 GG AFMJ A/C/C Crbn Rdln
0.600 0.500 0.400 0.340 0.300
ST Axis Grs/In @29" — — 8.1 235 9.0 261 9.5 276 10.7 310
ST Axis RT Grs/In @29" — — 8.9 258 9.8 284 10.3 299 11.5 334
N-Fused Carbon
Carbon Core
Your local archery pro shop is the best place to determine the actual draw weight of your bow. Actual Peak Bow Weight for recurve bows should be measured at your draw length.
Alloy/Carbon
HUNTING ARROWS & COMPONENTS
Carbon
Alloy Shaft and Component Specifications
Size13
XX751
XX782
Stock Length3 Spine @ 28" Span
UNI System5
751/782
Conventional Nock Size4
Inches
UNI X Nock Super UNI Bushing6 Bushing6 Bushing11
One-piece Bullet Point
RPS Insert Alum.
Grains8
RPS7 Point Size
Grains
Inches
Grains
Grains8
Grains8
1816 1916 2013
9.3 10.0 9.0
— — —
270 290 261
0.733 0.623 0.610
30 31 32½
9
⁄32 ⁄32 5 ⁄16
8 9 —
4 7 —
— — 5
63 72 68
74 82 —
12 16 21
2016 (500) 2018 2020
10.6 12.3 13.5
— — —
307 357 392
0.531 0.464 0.426
32 32½ 33
— 5 ⁄16 5 ⁄16
— — —
— — —
4 12 4 —
80 89 64
90 — —
20 19 18
5
2114 (510) 2115 2117 (400)
9.9 10.8 12.0
9.9 — 12.1
287 313 348
0.510 0.461 0.407
32½ 33 33
— — 5 ⁄16
(11) (11) —
— — —
7 7 7 12
78 83 97
100 100 100
25 25 25
5
2212 2213 (460) 2215
— 9.8 10.7
8.8 9.9 10.8
255 284 310
0.505 0.458 0.419
32½ 33½ 33
— — ⁄32
(13) (13) —
— — —
9 9 9
102 9 88 95
100 100 100
31 30 30
2216 (380) 2219 2312 (420)
12.0 13.8 —
12.1 13.9 9.5
348 400 276
0.376 0.337 0.423
33 34 33
11
⁄32 ⁄32 —
— — (15)
— — —
9 8 11
98 107 99 9
100 — 100
29 26 37
11
2314 (420) 2315 (340) 2317 (300)
10.7 11.7 13.3
10.8 11.8 13.4
310 339 386
0.391 0.342 0.297
33½ 34 34
— — —
(14) — —
— — —
10 11 12 11 12
— — —
100 100 100
34 37 37
11
2412 2413 (360) 2512
— 10.4 —
9.7 10.5 10.3
281 302 299
0.400 0.365 0.321
34 34 34½
— — —
(17) (17) (20)
— — —
12 12 15
110 110 108 9
100 100 100
40 40 52
11
2514 (310)
11.3
11.4
328
0.305
34½
—
(18)
—
14
—
100
48
11
9
11
11
— Indicates not available 1 XX75 Realtree Hardwoods HD Green, Camo Hunter, GameGetter, Legacy,. 2 XX78 Super Slam. 3 Length is approximate stock shaft length for each size. 4 Nock size for conventional swaged nock taper. 5 UNI—Universal Nock Installation System. 6 Parenthesis indicates smaller G Nock UNI Bushing size is available as an optional accessory. 7 RPS = Replaceable Point System with 8-32 ATA Standard thread. 8 NIBB point grain weights are ±0.5 grain. All other components are ±1 grain.
20
NIBB Point
7
Deflection in Inches
Grains per Inch
Weight Weight Grs/Inch @29"
Group B 75 75 Rdln
Group H SS, 75 SS, 75 SS, 75 SS, 75 GG AFMJ A/C/C Crbn Rdln
8.3 9.3 6.3
241 270 183
10.7 10.7 12.0 12.0 12.0 10.2 8.8 CAWT 7.6
310 310 348 348 348 296 255 CAWT 220
ST Epic Grs/In @29" 6.4 186 7.3 212 8.6 249 9.5 276 10.0 290
ST Epic Realtree HD Grs/In @29" — — 8.0 232 9.3 270 10.2 296 10.7 310
LightSpeed Grs/In @29" — — 6.5 189 7.4 215 8.2 238 — —
ST Excel Grs/In @29" — — 7.3 212 8.6 249 9.5 276 10.0 290
PowerFlight Grs/In @29" — — 7.3 212 8.9 244 9.3 270 9.5 276
2008 Shaft Models
2. Determining Ac tual Peak Bow Weight— Recurve and Modern Longbows
Shaft Weight10 @ 29"
Model
1. Once you have determined your Correct Hunting Arrow Length and Calculated or Actual Peak Bow Weight, you are ready to select your correct shaft size:
Bottom of nock groove.
the arrow one-to-two inches in front of the handle. Bow Draw Length. Draw length is measured at full draw from the bottom of the nock groove to the back (far side) of the bow. Actual arrow length and draw length are only the same if the end of the arrow shaft is even with the back of the bow (far side) at full draw.
Shaft Weight
Size Spine @ 28"
USING THE HUNTING ARROW SELECTION CHART
Note: Correct arrow length is measured from throat (string hole) of the nock to end of the shaft, not including point or insert.
Mark arrow here. Back of bow (far side)
1813 1716 780
Weight Grs/Inch
Carbon Shaft Weights (CAWT)
Bows without cut-out window (which will not allow a fixed blade broadhead to be drawn past the back of the bow). The Correct Hunting Arrow Length for bows without a cut-out sight window is determined by drawing back an extra-long arrow to full drawand having someone mark 1"-2" clearance (minimum)
Spine @ 28" Span Model
Size
Grains
⁄32 ⁄16 5 ⁄16 9
5
⁄16 ⁄16 5 ⁄16
5
⁄16 ⁄16 ⁄16 ⁄32 ⁄32 ⁄32
11 11 11
11 11
11 11
Inserts
Nock System
NockType
Weight 1 Tolerance4 Straightness Color/Finish
Sizes
High-strength N-Fused™ carbon-composite fibers
HIT Insert RPS Point
Internal-fit
X Nock
±2 grains
±.003"
Black, N-fused Micro-smooth
500, 400, 340, 300
High-strength N-Fused™ carbon-composite fibers
HIT Insert RPS Point
Internal-fit
X Nock
±2 grains
±.003"
Realtree APG, PhotoFusion
500, 400, 340, 300
Materials/Construction
Inserts
Alloy
⁄32 ⁄32 ⁄32 ⁄32 ⁄32 ⁄32
⁄32 ⁄32 11 ⁄32 11
⁄32
9
This NIBB point will provide approximately an 8% F.O.C. All other NIBB points are approximately 7% F.O.C. F.O.C. is Front-of-Center balance position on the arrow shaft. 10 Whenever both XX75 and XX78 shaft models exist for any size, the weight shown represents the XX75 shaft model. 11 Super UNI Bushing accepts Super Nock, 3D Super Nock and S Nock. 12 GameGetter composite bushing weight: 300 & 340=9 grains, 400=5 grains, 500=3 grains. 13 GameGetter and Super Slam Digital sizes indicated in parentheses. Notes: Shaft size 1716 uses BAR4; sizes 1813 and 1816 use BAR6; size 1916 uses BAR8 broadhead adapter rings.
www.TradTechArchery.com
Points
Nock System
NockType
Weight 1 Tolerance4 Straightness Color/Finish
Precision 7075 alloy jacket HIT Insert RPS Point bonded to a carbon core
Internal-fit
X Nock
±2 grains
±.002" guaranteed
Black, Diamond Pattern 500, 400, 340, 300
Precision 7075 alloy jacket HIT Insert RPS Point bonded to a carbon core
Internal-fit
X Nock
±2 grains
±.002” guaranteed
Camo Diamond Pattern 500, 400, 340, 300
Materials/Construction
Nock System
Points
Sizes
NockType
Weight 1 Tolerance4 Straightness Color/Finish
Sizes
High-strengthcarbon RPS Insert One-piece UNI System fiberbondedtoaprecision Parabolic, NIBB, 7075alloycoretube or RPS Point
G Nock
±0.5grains ±.002" guaranteed
3L-18, 3-18, 3-28, 3-39, 3-49, 3-60, 3-71
Materials/Construction
Inserts
Points
Black, Miro-smooth 9-micron
Nock System
NockType
Weight 2 Tolerance4 Straightness Color/Finish
Sizes
High-strength ST carbon- HP Insert HP or RPS Point composite fibers
Internal-fit
H Nock
±2 grains
±.003"
Black, Micro-smooth
600, 500, 400, 340, 300
High-strength ST carbon- HP Insert RPS Point composite fibers
Internal-fit
H Nock
±2 grains
±.003"
Realtree Hardwoods 500, 400, 340, 300 HD Green, PhotoFusion
High-strength ST carbon- HP Insert RPS POint composite fibers
Internal-fit
H Nock
N/A
N/A
Black, Micro-smooth
45 lbs. Max
High-strength ST carbon- HIT Insert RPS Point composite fibers
Internal-fit
X Nock
N/A
N/A
Black, Micro-smooth
4 lbs. Max
High-strength ST carbon- STCB composite fibers Insert
Inserts
Points
HP or RPS Point
Internal-fit
H Nock
±2 grains
±.005"
Black, Micro-smooth
500, 400, 340, 300
CB Insert CB or RPS Point
Internal-fit
Super Nock or 3D ±2 grains Super Nock (optional UNI & G Nock)
±.003"
Black, Matte
500, 400, 340
High-strength C2 carbon- CB Insert CB or RPS Point composite fibers
Internal-fit
Super Nock or 3D ±2 grains Super Nock (optional UNI & G Nock)
±.006"
Black, Micro-smooth
500, 400, 340, 300
Nock System
NockType
Superlite Carbon multilayer wrapped fibers
5
5
Materials/Construction
Alloy
Strength3 Inserts (psi)
Weight Tolerance
Straightness1 Color/Hard-Anodized Finish
Sizes
7178-T9
100,000
RPS Insert One-piece Bullet, Super UNI System S Nock NIBB, or Field Point
±1%
±.001" guaranteed
Digital Leaf™ PermaGraphic Camo
510(2114), 460(2213), 420(2312), 400(2117), 390(2314), 380(2216), 360(2413), 340(2315), 310(2514), 300(2317)
7075-T9
95,000
RPS Insert One-piece Bullet, Super UNI System Super Nock or NIBB, or 3D Super Nock Field Point
±1%
±.002" guaranteed
RealtreeHardwoodsHD 2117, 2213, 2216, 2314, 2315, 2413 Green PermaGraphic Camo
7075-T9
96,000
RPS Insert One-piece Bullet, Super UNI NIBB, or System or Field Point X UNI System
Super Nock, 3D Super Nock or X Nock
±1%
±.002" guaranteed
4-Tone Black, Brown, Dark Green, & Light Green Dye Camo
1816, 1916, 2013, 2016, 2018, 2114, 2117, 2213, 2215, 2216, 2219, 2314, 2315, 2317, 2413, 2514
7075-T9
95,000
RPS Insert One-piece Bullet, Full-diameter NIBB, or Taper Swage Field Point
Conventional
±1%
±.002" guaranteed
Cedar-Grain, PermaGraphic
1916, 2016, 2018, 2020, 2117, 2216, 2219
7075-T9
96,000
RPS Insert One-piece Bullet, Super UNI System Super Nock or NIBB, or Composite 3D Super Nock Field Point Bushing
±1¼%
±.003" guaranteed
Black, Hard-anodized
500, 400, 340, 300
5086
58,000
Not One-piece Point Full-diameter Available Taper Swage
Conventional
N/A
N/A
Black, Hard-anodized
1820
Fiberglass
Not Not Steel Sleeve Available Available Point
Over Nock
N/A
N/A
BLack
17/64"
Points
1 Guaranteed straight to more stringent standards than ATA/ASTM methods. 2 Guaranteed to meet or exceed similar carbon-industry straightness specifications. 3 Tensile strength value may vary ±3%.
Open-ended slip-on
4 Grains-per-shafts in a dozen bundle. ®/™ Registered trademark/trademark of Easton. ® Super Slam is a registered trademark of Chuck Adams. ® Hardwoods HD Green and APG are trademarks of Jordan Outdoor Enterprises, Ltd.