005_PTO Pumps
4/1/13
12:01 PM
Page 39
PTO PUMPS
Darley has a wide variety of PTO and hydraulically driven pumps with flows up to 1500 gpm ideal for pump and roll applications.
AG PUMPS
PUMP
PAGE 40
1 1/2AGH 2 1/2AGH
40
1 1/2AGD 2 1/2AGD
42
HH 250, 350, 500
42
LSH 500, 750, 1000
42
The HM series pumps have been a best seller for almost 30 years. These high performance compact pumps are rated at 250, 350 and 500 gpm @ 150 psi. HM pump design allows flexibility, as transmissions and pump casings can be rotated 360˚ to meet many applications.
H 100 BOOSTER PUMP
42
HM 250, 350, 500
43
HSP 250 & 350
44
JMP 500 & JMP 500 NH
44
JMP PUMPS
KSP 500, 750, 1000
45
KSPAH 500, 750, 1000
45
LSP 500, 750, 1000
46
LSPH 500, 750, 1000
46
PSP 1000, 1250, 1500
47
PSPH 1000, 1250, 1500
48
PSD 1000, 1250, 1500 “SILENT PAK™”
48
ZSP 2500 & 3000
49
AUTOPRESSURE™ SYSTEM
49
KDM-HD-PTO
50
LDM-XHD-PTO - MAGNATRANS™
50
ZSM-XHD-PTO - MEGATRANS™
50
Rated up to 325 gpm @ 150 psi, the 11/2 AG and 21/2 AG pumps are a compact solution for pump and roll pumper applications. The 21/2 AG has flows up to 325 gpm. Both pumps offer pressures of up to 300 psi.
HM PUMPS
The two-stage design allows for 500 gpm @ 150 psi, and pressures up to 600 psi. JMP pumps are the choice of many wildland customers from the California Department of Forestry to the U.S. Forest Service.
KSP & LSP PUMPS Rated at 500, 750 and 1000 gpm @ 150 psi, the KSP and LSP pumps are compact solution for pump and roll pumper applications. The LSP uses many of the same castings as our popular LDM series pumps, allowing us to reduce costs through mass customization.
PSP PUMPS The PSP is an ideal solution for economical pumpers and tankers due to reduced installation cost, while offering pump and roll capability. Its compact design means less space and weight on the vehicle, while allowing for flows over 1500 gpm.
PTO
1 1/2AG & 2 1/2AG
1
ZSP PUMPS The Darley ZSP is the highest flowing PTO pump on the market with ratings from 2500-3500 gpm when supplied with ample power through a PTO or engine drive. Excess capacity is available to be tapped with a large engine and the utilization of a power divider.
FEATURES THAT SET DARLEY PUMPS APART 1. Flows up to 1500 gpm
3 2 4 5
2. Pipe thread, weld flange or victaulic grooves available 3. Two and three gear transmission available
6
4. Lightweight and compact design 5. Gear box can be easily rotated 6. All PTO pumps come standard with mechanical seals, injection packing is optional at no additional cost
1.800.323.0244 | www.darley.com
39