USMC "BOO Box" 30kW ECU Power Distribution Box 100 Amp Military Style to Pin & Sleeve Receptacles provide power directly to smaller distribution units for lights, computers, and cell phones. This unit also specifically allows connection to USMC B0014 environment control units. Tested and passed MIL-STD-810F for: high and low temperature, solar radiation, rain, salt, fog, sand, dust, icing and freezing rain, road mission and drop test.
4Fully insulated heavy-duty molded rubber enclosure with HDPE
top and bottom provides superior impact, weather, chemical and shock resistance Hydraulic-magnetic circuit breakers prevent nuisance tripping at high temps Units can be stacked, elevated base keeps receptacles above ground System Includes: 100 Amp, 3-phase, 4 pole, 5 wire, 120/208Y VAC with Military enclosure, 100 Amp pin & sleeve inlet to (4) 60 Amp pin & sleeve receptacles, (6) 30 Amp pin & sleeve receptacles and NEMA 5-20, 20 Amp GFCI duplex receptacle
4 4 4
EXPEDITIONARY
ML1821
USMC MEPDIS-R 30kW Power Distribution Box
$8,268.95
EverGrip ® 20 Amp Molded Cable Extensions
EverGrip ® 20 Amp Quad Stringer
Provide power from a portable power distribution box to tents and shelters to power lights, computers and other equipment.
Used to distribute power from portable distribution boxes in tents and shelters to power lights, computers and light tools in expeditionary applications.
4Commercial Off-The-Shelf (COTS) product ensures systems compatibility 4To provide superior strain relief and maintain secure terminations 4Connector construction encapsulates conductors to prevent 420 Amp, 120 VAC GFCI receptacle provides feed-thru protection to (5) 20 Amp, 120 VAC duplex receptacles short circuits and creates a bond between cable and connector 4Durable, molded thermoplastic elastomer portable boxes 4Connector design prevents pins and contacts from being pushed back into housing, extending cable assembly life 4EverGrip connector construction encapsulates conductors to prevent short circuits due to bond the cable to the Oil resistant thermoplastic elastomer connector overmold 4 connector for superior strain relief absorbs impact, protects internal conductors and is resistant to a wide variety of chemicals 4Oil resistant thermoplastic elastomer overmold absorbs impact, protects internal conductors, provides insulated 4MIL-DTL-5015 covers, attached with corrosion-resistant gripping surface stainless steel chain and hardware, provide environmental sealing when connectors are not mated 420 Amp male plug has threaded cover to protect pins, prevent infiltration of contaminants when not in use 4System Includes: 20 Amp, 120 VAC, 2 pole, 3 wire, EverGrip molded MIL-DTL-5015 connectors on 12/3 SOOW cable, 4NEMA 3R receptacle covers UL Listed for wet locations EverGrip MIL-DTL-5015 4System Includes: 20 Amp, 120 VAC, 2 pole, 3 wire, ®
POWER DISTRIBUTION
®
®
EverGrip® molded MIL-DTL-5015 male connector, 12/3 AWG SOOW cable to 20 Amp, 120 VAC GFCI duplex receptacle with covers and (5) 20 Amp, 120 VAC duplex receptacles with covers
ML1823
340
EverGrip® 20 Amp Molded Cable Extensions $544.95
1.800.323.0244 | www.darleydefense.com/exp
ML1822
EverGrip® 20 Amp Quad Stringer
$544.95