Uponor Smatrix Base timer I-143 Bus The functions in the timer I-143 are: • Display with backlight • Software version display on start up • Set time start up wizard • Comfort/ECO indication • Low battery indication
• 6 pre-programmed schedules + 1 freely programmable schedule • Holiday mode • Autobalancing setting on/off • ECO setback value setting • Settings, such as clock and date reset
Uponor Smatrix Base thermostat prog.+ RH T-148 Bus The functions in the thermostat prog.+RH T-148: • 6 pre-programmed schedules + 1 freely programmable schedule
• Comfort/ECO indication and mode reception from timer • Manual H/C switchover function (hidden if used in Smatrix Base)
• Display with backlight, dims 10 seconds after last button event
• Regulation mode, i.e. room temperature (RT), internal with floor max./min. (RFT), remote sensor (RS), remote outdoor (RO)
• Software version (on power up)
• Display Celsius or Fahrenheit
• Heating or cooling demand indication
• Settings, such as clock and date reset
• RH limit indication
• Set point range 5-35 °C
• Low battery indication
Uponor Smatrix Base thermostat digital T-146 Bus The functions in the digital thermostat T-146 are: • Display with backlight, dims 10 seconds after last button event • Software version (on power up)
• Regulation mode, i.e. room temperature (RT), internal with floor max./min. (RFT), remote sensor (RS), remote outdoor (RO) • Display Celsius or Fahrenheit • Set point range 5-35 °C
• Heating or cooling demand indication • Low battery indication • Comfort/ECO indication and mode reception from timer • Manual H/C switchover function (hidden if used in Smatrix Base)
Uponor Smatrix Base thermostat standard T-145 Bus/T-145 Bus POD The functions in the standard thermostat T-145/T-145 POD are:
• Heating/cooling demand indication
• Blue light indication behind the dial after changing the set point
• Set point range 5-35 °C
• Printed scale on dial (only T-145 Bus POD)
28 l Uponor Smatrix – Technical information
• Dip switch to enable or disable timer function